SDS 1072/1074CFL / SDS 1102/1104CFL SDS 1202/1204CFL / SDS 1302/1304CFL Digital Storage Oscilloscopes 70MHz / 100MHz / 200MHz /300MHz Features 500MSa/s & 1GSa/s Sampling Rate 2 Channels / 4 Channels 7 Widescreen LCD Color USB Host/Device: Support USB Printer and USB Flash Drive PictBridge Funktion EasyScope Software 12 Languages Applications Industrial power design, troubleshooting, installation and maintenance Electronics design, troubleshooting, installation and maintenance Circuit design & debug Educational lab & training institutions Repair & service Production test & quality inspection Characteristics The highest single real-time sampling rate is up to 1Gsa/s. Equivalent sampling rate is up to 50GSa/s. Memory depth: 24kpts. Trigger types: edge, pulse width, video, scope, alternative. Unique digital filter function and waveform recorder function. Two/four groups reference waveforms and twenty groups capture waveforms and twenty groups setups internal save/recall function and USB flash save/recall function. Thirty two parameters auto measure function and support all measurement functions. Save/recall types: setups, waveforms, CSV file, picture. Waveform intensity and Grid Brightness can be adjusted. Channel waveform and its FFT waveform display on split screen. Waveform intensity and grid brightness can be adjusted. Rich screen display styles: classical, modern, tradition, succinct. Cursor types: manual mode, track mode, auto mode. Support multilingual on-line help system. User Interface in 12 Languages. Standard interface: double USB host, USB device, LAN port, pass/fail out. SDS 1072/1074CFL SDS 1102/1104CFL SDS 1202/1204CFL 200MHz, 1GSa/s, 2/4Channel SDS 1302/1304CFL
Model SDS 1072CFL / SDS 1074CFL SDS 1102CFL / SDS 1104CFL SDS 1202CFL / SDS 1204CFL SDS 1302CFL / SDS 1304CFL Index Bandwidth 70MHz 100MHz 200MHz 300MHz Sampling Rate Equivalent Sampling Rate Memory Depth 1CH: 2GSa/s 2CH: 1GSa/s 50GS/s 1CH:24kpts 2CH: 12kpts Rise Time <5ns <3,5ns <1,8ns <1,2ns Input 1MΩ 13pF 1MΩ 13pF, 50Ω Impedance Sec/div Range 5ns/div-50s/div 2,5ns/div-50s/div 1ns/div-50s/div Scan: 100ms-50s/div 7 LCD Color(480X234px) Features Abundant Trigger Function SDS1000 series products have rich trigger modes: edge, pulse, video, slope and alternative mode, which satisfy users with more extensive needs. Alternative trigger mode is usually used to observing two uncorrelated signals at the same time. Furthermore the user can select different trigger mode for two channels, which is a kind of reproduction of the analog oscilloscope function to the digital oscilloscope. FFT Waveform Split Function FFT waveform and its channel waveform can be displayed via split screen at the same time. In split screen display mode, the screen is divided in eight sections in vertical direction That is similar under the entire screen pattern simultaneously to observe two waveforms to be clearer and convenient. Pop-up Menu Mode The menu may hide a necessary made waveforms display on 18 divisions full screen. Comparing with other same level digital oscilloscopes, this kind of pattern is more flexible, the operation is more convenient and waveforms can be observed clearly. SDS1000 series products are equipped with a 7 wide screen color TFT LCD. The screen display parameter value and the waveform are clearer, more stable and nature. That is also more advantageous to alleviate tiredness of users using the instrument extended periods at a time. Digital Filter Function SDS1000 series provide a digital filter function. With this function is the user able to set upper limit and lower limit of frequency to reduce signal noise and filter error signal. So they can observe their signals of interest distinctly which will advance users work efficiency consumedly. Waveform Recorder Function By the use of this function the user can continue record data of their needed signals as the form of frame. Waveform recorder can record input waveform from CH1 and CH2 with a maximum record length of 1500 frames. This record behavior can also be activated by the pass/fail test output, what makes this function especially useful to capture abnormal signals in long term without keeping an eye on it. Pass/Fail Function Users may use the pass/fail function which the SDS1000 series provides to carry on the product test. Through a series of setups, the oscilloscope can output the test result automatically. This enhances the product production efficiency greatly. Auto Measure Function SDS1000 series can measure thirty two parameters automatically, which is most among the same level digital oscilloscopes. Auto measure function can eliminate user error consumedly and users are able to measure needed parameters faster and more accurately. SDS1000 series also have all measurement functions that displays all the waveform parameters on the screen according to measure kinds, and users can ready measure parameters value expediently making SDS1000 series the most perfect measure tools. Multi-Country Language User Function SDS1000 series product has 12 languages interface display function: Simplified Chinese, Traditional Chinese, English, Arabic, French, German, Russian, Spanish, Portuguese, Japanese and Korean, which has further developed the SDS1000 series product for the international market Powerful EasyScope3.0 Software EasyScope3.0 software is the powerful system software suitable for SDS1000 series products. This software is compatible with RS-323 and USB devices to realize communication between the computer and the oscilloscope, then realizes longdistance control. Simultaneously this software can automatic real-time refresh waveform data, provides waveforms, measure data, sampling data, screen images read storage and printing functions. In addition EasyScope3.0 has setup upload and download function. Most quickly, based on millisecond level, interaction between PC and SDS1000 series allows an easier analysis of waveforms and data for the user. Cursor Survey Function SDS1000 series cursor survey function has three different modes: auto manual mode, track mode, auto mode. The user may according to own need to choose the survey pattern nimbly, this with easy read measure results from the top right of the screen or experience completely automatic intelligent design pattern. SDS1000CFL series Spec Sheet (File Version_v2.0)
Input Input Coupling Input Impedance Maximum Input Voltage CH to CH Isolation (both channels in same V/div setting) Probe Attenuator Probe Attenuator Factors Set Horizontal System Real Time Sampling Rate Equivalent Sampling Rate Measure Modes Time Base Accuracy Horizontal Scan Range Vertical System Vertical Sensitivity Channel Voltage Offset Range AC, DC, GND 1MΩ ± 2% 13pF ± 3pF (SDS 1102CFL, SDS 1104CFL) 1MΩ ± 2% 13pF ± 3pF, 50Ω ± 2% (SDS 1202CFL, SDS 1204CFL) 400V (DC + AC PK-PK, 1MΩ input impedance, X10), CATI, CATI II >100:1 at 100MHz (SDS1204CFL, SDS1202CFL) >100:1 at 50MHz (SDS1104CFL, SDS1102CFL) 1X, 10X 1X, 5X, 10X, 50X, 100X, 200X, 500X, 1000X single channel 2GSa/s double channels 1GSa/s (when time base faster than 25ns/div) 50GSa/s MAIN, WINDOW, WINDOW ZOOM, ROLL, X-Y ±100ppm measured over 1ms interval 1,0ns/div 50s/div scan: 100ms/div ~ 50s/div (1-2.5-5 sequence) 2mV 5V/div at input BNC (1-2-5 order) 2mV 100mV: ±800mV 102mV 5V: ±40V Vertical Resolution 8 bit Channels 2/4 300MHz (SDS 1302CFL, SDS 1304CFL) Analog Bandwidth Single-Shot Bandwidth Lower Frequency Limit (AC 3dB) BW Flatness at BNC Input Noise: Pk Pk for 3K record 200MHz (SDS 1202CFL, SDS 1204CFL) 100 MHz (SDS 1102CFL, SDS 1104CFL) 70MHz (SDS 1072CFL, SDS 1074CFL) 300MHz (SDS 1302CFL, SDS 1304CFL) 200MHz (SDS 1202CFL, SDS 1204CFL) 100 MHz (SDS 1102CFL, SDS 1104CFL) 70MHz (SDS 1072CFL, SDS 1074CFL) 10Hz (at input BNC) DC -10% of rated BW: +/- 1dB 10% - 50% of rated BW: +/- 2dB 50% - 100% of rated BW: + 2dB/-3dB 0.6div for average of 10 Pk-Pk readings, fixed gain settings 0.7div for average of 10 Pk-Pk readings, variable gain settings SFDR Including Harmnonics (measured with FFT) DC Gain Accuracy DC Measurement Accuracy: All Gain Settings 100mV/div DC Measurement Accuracy: All Gain Settings >100mV/div Rise Time Overshoot, Typical (using 500ps pulse) 35dB <±3.0%: 5mv/div to 5V/div in fixed gain ranges <±4.0%: 2mv/div variable gain ranges ± [3% X ( reading + offset )+1% X of offset +0,2div+2mV] ± [3% X ( reading + offset )+1% X offset +0,2div+100mV] <1,2ns (SDS 1302CFL, 1304CFL) <1,8ns (SDS 1202CFL, SDS 1204CFL) <3,5ns (SDS 1102CFL, SDS 1104CFL) <5ns (SDS 1072CFL, SDS 1074CFL) <10% with probe or BNC input w/ 50 Ohm feed thru
CH to CH Skew (both channels in same V/div setting) <1ns: <2ns: SDS 1302CFL, SDS 1304CFL SDS 1202CFL, SDS 1204CFL SDS 1102CFL, SDS 1104CFL SDS 1072CFL, SDS 1074CFL (equivalent to 2 minor divisions in smallest t/div) Math Operation +,-,*,FFT FFT window mode: Hanning, Hamming, Blackman, Rectangular sampling points: 1024 Bandwith Limited 20MHz ±40% (Note: BW limited below 20MHz when using probe in x1) Trigger System Trigger Types edge, pulse width, video, slope, alternative Trigger Modes auto, normal, single Trigger Sources CH 1-4, EXT, EXT/5, AC Line Trigger Coupling AC, DC, LF rej, HF rej CH 1-4: ±6 divisions from center of screen Trigger Level Range EXT: ±1.2V EXT/5: ±6V Trigger Displacement pre-trigger: (memory depth/(2*sampling)), delay trigger: 260div Trigger Level Accuracy (typical) internal: ±(0.2 div x V/div)(within ±4 divisions from center of screen) applicable for the signal of rising EXT: ±(6% of setting + 40 mv) and falling time 20ns EXT/5: ±(6% of setting + 200 mv) Trigger Sensitivity Pulse Width Trigger Video Trigger Slope Trigger Alternative Trigger for fixed gain ranges 1 division: DC-10MHz 1.5 divisions: 10MHz max. BW EXT: EXT/5: 200mVpp DC-10MHz, 300mVpp 10MHz max. BW 1Vpp DC-10MHz, 1.5Vpp 10MHz max. BW trigger modes: (, <, =) positive pulse width, (, <, =) negative pulse width pulse width range: 20ns-10s support signal formats: PAL/SECAM, NTSC trigger condition: odd field, even field, all lines, line Num (, <, =) positive slope, (, <, =) negative slope time: 20ns-10s CH1 trigger type: edge, pulse, video, slope CH2 trigger type: edge, pulse, video, slope CH3 trigger type: edge, pulse, video, slope CH4 trigger type: edge, pulse, video, slope X Y Mode X Pole Input / Y Pole Input (CH1)/(CH2) or (CH3)/(CH4) Phase Error ±3 degrees Sample Frequency XY mode has a breakthrough that traditional oscilloscopes restrict sampling rate at 1MSa/s. Support 25kSa/s ~ 250MSa/s adjusted. Control Panel Function Auto Set auto adjusting the vertical, horizontal system and trigger position Save/Recall support 2/4 group referenced waveforms, 20 group setups, 20 group captured waveforms internal storage/recall function and USB flash driver storage function. Hardware Frequency Counter Reading resolution 6 Bytes Accuracy ±0.01% Range DC couple, 10 Hz to max. bandwidth Signal Types satisfying all trigger signals (except pulse width trigger and video trigger)
Measure System Auto Measure Cursor Measure Mode Resolution Color Contrast (Typical state) Backlight Intensity (Typical state) Wave Range Wave Mode Point, Vector Menu Skin Screen Saver Waveform Interpolation Color Model Language Environments Temperature Humidity Height Power Supply Input Voltage Frequency Scope Power Mechanical Dimension Weight Vpp, Vmax, Vmin, Vamp, Vtop, Vbase, Vavg, Mean, Crms, Vrms, ROVShoot, FOVShoot, RPREShoot, FPREShoot, rise time, fall time, Freq, Period, +Wid, +Dut, -Dut, Bwid, Phase, FRR, FFR, FFF, LRR, LRF, LFR, LFF manual mode, track mode and auto mode color TFT 7 diagonal liquid crystal display 480 horizontal by 234 vertical pixels 64k color 150:1 300nit 8 x 18 div dots, vector off, 1 sec, 2 sec, 5 sec, infinite 2 sec, 5 sec, 10 sec, 20 sec, infinite succinct, modern, tradition, classics 1min, 2min, 5min, 10min, 15min, 30min, 1hour, 2hour, 5hour, off Sin(x)/x, linear normal, invert English, French, German, Russian, Spanish, Simplified Chinese, Portuguese, Japanese, Korean, Italian, Arabic operating: +10 C to + 40 C non-operating: -20 C to + 60 C operating: 85%RH, 40 C, 24 hours non-operating: 85% RH, 65 C, 24 hours operating: 3000m non-operating: 15,266m 100-240 VAC, CAT II, auto selection 45Hz to 440Hz 50VA max length width height 358mm 156mm 118mm ca. 4,5kg We pursue a policy of continuous and product improvement. Thus the specifications and picture in this data sheet and control location at the front panel may be changed.