LED Pro Wash SRL Specifications. DMX Channels

LED Pro Wash SRL-6349 Architectural, stage, commercial, club, this professional wash covers all the applications where smooth, rich color wash is required. The LED Pro Wash incorporates all of the functionality required to be applied professionally. With 5 program cues available, each program can contain a maximum of 10 scenes with 36 timed events that can be set to any desired clock time. The LED Pro Wash also has a built in thermal sensor to enable operations below 60 C. Whether operated with DMX-512, Stand-alone or, via the built in sophisticated yet simple to operate 1 time/ scene selection system the LED Pro Wash delivers professional results. Patented (China) Patent Pending (Globally) 5 program edtions avaiable, each program can have max 10 scenes. 36 time-burst events can be set, every event can be set any time. Built-in thermo sensor unit ensures the lamps will be working under 60 C Total output power Control modes DMX channels Voltage 1W and 3W power LED 24 Red(1W), 18 Green(3W), 7 Blue(3W) 91W DMX, Auto, Sound, M/S (Linking) 8 AC 100-240V 50-60Hz L376 x W232 x H432mm 13.5 kg DMX Channels 0 74

LED PRO Architectural Patented (China) Patent Pending (Globally) LED Pro Wash AW SRL-6349W Architectural, stage, commercial, club, this professional wash covers all the applications where smooth, rich color wash or white with color temperature correction is required. The LED Pro Wash and LED Pro Wash AW incorporate all of the functionality required to be applied professionally. With 5 program cues available, each program can contain a maximum of 10 scenes with 36 timed events that can be set to any desired clock time. The LED Pro Wash and LED Pro Wash AW also has a built in thermal sensor to enable operations below 60 C. Whether operated with DMX-512, Stand-alone or, via the built in sophisticated yet simple to operate 1 time/scene selection system the LED Pro Wash and LED Pro Wash AW delivers professional results. 5 program edtions avaiable, each program can have max 10 scenes. 36 time-burst events can be set, every event can be set any time. Built-in thermo sensor unit ensures the lamps will be working under 60 C Total output power Control modes DMX channels Voltage 3W power LED 42 White, 7 Amber 147W DMX, Auto, Sound, M/S (Linking) 8 AC 100-240V 50-60Hz L376 x W232 x H432mm 13.5 kg DMX Channels 075

LED Linear Pro Wash RGB LED-L-WS-RGB-10-6052 LED-L-WS-RGB-25-6052 Architectural, stage, commercial, club, this professional wash covers all the applications where smooth, rich color wash or white with color temperature correction is required. The LED Linear Wash and LED Linear Wash AW incorporate all of the functionality required to be applied professionally. With 5 program cues available, each program can contain a maximum of 10 scenes with 36 timed events that can be set to any desired clock time. The LED Linear Wash and LED Linear Wash AW has a built in thermal sensor to enable operations below 60 C. Whether operated with DMX-512, Stand-alone or, via the built in sophisticated yet simple to operate 1 time/scene selection system the LED Pro Wash and LED Pro Wash AW delivers professional results. DMX Channels Patented (China) Patent Pending (Globally) Lighting source Total output power Beam angle Control modes DMX channels Pan Tilt Voltage 3W power LED 30 Red, 30 Green, 30 Blue 150W 25 & 10 available DMX, Auto, Sound, M/S (Linking) 8-15 ---75-50 ---50 AC 100-240V 50-60Hz L984 x W232 x H337mm 17.8 kg 0 76

LED Linear Pro Wash AW LED-L-WASH-AW-10-6053 LED-L-WASH-AW-25-6053 Patented (China) Patent Pending (Globally) LED PRO Architectural Lighting source Total output power Beam angle Control modes DMX channels Pan Tilt Voltage 3W power LED 42 White, 30White, 18 Amber 186W 25 & 10 available DMX, Auto, Sound, M/S (Linking) 8-15 ---75-50 ---50 AC 100-240V 50-60Hz L984 x W232 x H337mm 17.8 kg LED Linear Pro Wash AW offers all the features and functions of the RGB version except with respect to color control. The LED Linear Pro Wash AW contains Amber and (WLED) White not RGB Power LEDs for Color Correlated Temperature control (CCT). The LED Linear Pro Wash offers a full range of White Color temperatures rated in Kelvin from 3000 to 9000K. The LED Linear Pro Wash is ideal for Commercial Architectural Illumination, TV Studio Set Contrasting and other applications where White Light CCT control is desired. The LED Linear Pro Wash is also available with NEW (WLED) Warm and Ultra Warm White LEDs which can lower the CCT range down to 2000K. Color Correlated Temperature (CCT): This measure of how warm or cool a light seems. A low CCT--below 3100 K--is a warm white light and below 3000K is considered ultra-warm white. The measurement of CCT is expressed in Kelvin (K). The reason this measurement is called a temperature is because it was derived from a theoretical object called a black body radiator. When the radiator is heated, it changes from black to red to yellow to white to blue. The lower the Kelvin rating, the warmer or more yellow the light. The higher the rating, the cooler or more blue the light. Most lighting Kelvin temperature ranges from 2000k to 6400k. DMX Channels Warm White and Ultra Warm White light is traditionally produced by incandescent and halogen based products. Now these color temperatures have been achieved with WLED Technology. Whether you desire products with a cool pure white look, or the more traditional warm and ultra warm white incandescent look LEDs the LED Linear Pro Wash can accommodate your needs. AW Version: 3000-9000K W/WW/UW Version: 2000-9000K LED-LWS-W-W-UWW-10-6054 (Outdoor) LED-LWS-W-W-UWW-25-6054 (Outdoor) 077

LED Panorama Wash LW-340-PC-120V/240V-RGB LED Panorama Wash is a new style of energy saving, LED based, wash fixture, Incorporating 18 RGB 1W Power LEDs. The LED Panorama Wash is a RGB full color 16.7M true 24 Bit color changing fixture, LED Panorama Wash can be operated standalone, master slave with built in pre-programmed effects or directly with and standard DMX-512 controller. The LED Panorama Wash is engineered with push button waterproof external LED display based user interface for setting the mode of operation or DMX Address. The LED Panorama Wash uses only 3 Channels of DMX to enable external programming of linear color changing, step based scenes as desired by the lighting designer. You can also add an easy to use pre-programmed external controller if you are DMX challenged such as the SRC-WASHER-100-A. The DMX- Address is written to the fixture using the SRC-WASHER-100A as well as providing a standalone control solution For more information on controller functionality refer to the control section of this catalog. The LED Panorama Wash housing is composed of Aluminum Die Cast fixture housing, with a clear polycarbonate aperture cap, rated at IP65. The LED Panorama Wash has a very low profile and narrow footprint which makes it perfect for applications where there is little room to install larger fixtures such as window ledges and coving. The housing has also been designed to have a professional commercial look and appeal which makes the LED Panorama wash ideal for applications where the fixture itself can be seen. Beam angle Illumination distance Fixture housing Signal connector Power connector Control DMX channels 1W power LED 18 LEDs (6 Red, 6 Green, 6 Blue ) 25 C 20 m Die Cast Aluminum Coated with Clear PC Aperture 3-Pin (See Cable Section on next page) 3-Pin (See Cable Section on next page) DMX-512 or Standalone with SRC-WASHER-100A 3 Electrical specification Operating voltage Operating current Power IP rating 90~264V AC/24V DC 0.14A 30W IP65 Environmental Application Temperature -20 C~ 40 C (industry level components) L343 x W90 x H50.5mm 1.5 kg Luminous Flux Demo Kit Color White Red Green Blue Input (Lumens) 589.3 236.9 290.8 90.1 Power (Watts) 30.8 16.8 17.2 18.3 Light Efficacy(Lm/w) 19.1 14.1 16.9 4.9 DMX Function Chart Mode 1 Pixel DMX Channels 3 Channel 1 2 3 Name Red Green Blue Value 0-255 0-255 0-255 Function 0-100% Intensity 0-100% Intensity 0-100% Intensity 078

LED Panorama Wash AW LW-340-PC-120V/240V-CTC LED PRO Architectural LED Panorama Wash AW is a new style of energy saving, LED based, wash fixture, Incorporating 12 AW 1W (Amber (WLED) White) Power LEDs. The LED Panorama Wash AW is a Color Correlated Temperature linearly adjustable Color Temperature Changing LED product, With the LED Panorama Wash AW you can adjust the color temperature from 2000 to 10,000K enabling you to set various light temperature looks for a variety of applications. LED Panorama Wash AW can be operated standalone, master slave with built in pre-programmed effects or directly with and standard DMX- 512 controller. The LED Panorama Wash AW is engineered with push button waterproof external LED display based user interface for setting the mode of operation or DMX Address. The LED Panorama Wash AW uses only 3 Channels of DMX to enable external programming of linear color changing, step based scenes as desired by the lighting designer. You can also add an easy to use pre-programmed external controller if you are DMX challenged such as the SRC-WASHER-100-A. The DMX- Address is written to the fixture using the SRC-WASHER-100A as well as providing a standalone control solution For more information on controller functionality refer to the control section of this catalog. Beam angle Illumination distance Color temperature Fixture housing Signal connector Power connector Control system DMX channels Demo Kit 1W Power LED A6 W12 40 20M 1692-7012K Die Cast Powder Coated Aluminum 3-Pin Control and Installation Type dependant 3-pin molded connector DMX-512 3 The LED Panorama Wash AW housing is composed of Aluminum Die Cast fixture housing, with a clear polycarbonate aperture cap, rated at IP65. The LED Panorama Wash AW has a very low profile and narrow footprint which makes it perfect for applications where there is little room to install larger fixtures such as window ledges and coving. The housing has also been designed to have a professional commercial look and appeal which makes the LED Panorama Wash AW ideal for applications where the fixture itself can be seen. Electrical specification Operating voltage Operating current Power IP rating 90~264V AC/24V DC 0.212A 25W IP66 Environmental Application temperature -20 C~ 40 C : L343 x W90 x H50.5mm 1.5 kg Illuminance at Distance illum(lux) Distance Color 1m Y 204.8 W 549.2 YW 746.8 2m 51.19 137.3 186.7 3m 22.76 61.03 82.98 4m 12.83 34.33 46.68 5m 8.91 21.97 29.87 DMX Function Chart Mode DMX Channels 1 Pixel 3 Channel 1 2 Name Amber White Vivid Wash III is available in Black or White Finish Standard. Custom Finishes upon request (Volume Dependant) Value 0-255 0-255 Function 0-100% Intensity 0-100% Intensity 079

LED Mini Array LED Mini Array is new indoor Power LED based Array System that offers extreme versatility for a wide variety of applications. The LED Mini Array RGB version enables full 16.7M color true 24-Bit linear color changing. The (WLED) White LED Version incorporates Power Led 1W White LED s which enables dimmable white wash, punch in and out, strobe, and is the new high tech replacement for the micro blinder. LED Mini Array is configurable into 4 different array configurations due to the unique design, interconnection method, and array hardware kit. Each unit can connect to each other using professional butterfly clasps. The 4-pin M-F data in and through angled connector design, enables the easy interconnection of up to (5) units per SRC-255-PSU controller. LED Mini Array is non-direct DMX controllable and can be operated in standalone, and DMX-512 control via the SRC-255 PSU controller. For more information about the functionality of the SRC-255PSU controller refer to LED catalog. Array Connection Opfions This products can be connected in series in different arrays 1. Vertical linear connecttion 2. Horizontal linear connection 3. Matrix block connection Controller (Required for Stand-alone and DMX control) SRC-255PSU controller Controllers and Control Options: DMX-512 Mode Requires DMX-512 Controller SRC-255PSU Controller Stand-Alone Mode Requires SRC-255PSU Controller For Large Configurations of more than 30 LED Mini Array units (6 SRC-255PSU units) you will need to add the SRC-143 Signal Amplifier * Controllers sold separately Item No. LED color range Beam angel Data interface Control system Bean angle Distribution Fixture housing Connector LW-240-PC-48V (RGB) LW-240-PC-W (white) RGB 16.7 Million Colors True 24-Bit Linear Power LED (WLED) White LED 1W power LED 12 x 1W (WLED) Cool White 25 25 SRC-255PSU (Stand-alone and DMX) SRC-255PSU controller/src-255psu controlled by DMX512 28 (at 50% of peak illuminance) 25 Symmetric direct illumination 248X124X63mm 248X124X63mm Aluminum powder coated black Aluminum powder coated black 4 Pin In and Through 1.5Kg 1.5Kg Electrical specification Input voltage Maximum wattage Operating temperature 080 48V DC 18W -20 C ~ +40 C 48V DC 18W -20 C ~ +40 C

LED Color Bank 30 SRL-6019 LED color range Total output power Beam angle Control mode DMX channels Voltage 240 Ø5 ultra bright LEDs (80 Red, 80 Green, 80Blue) 16.7M true 24-bit linear 13.76W 25 DMX, Auto, Sound 32 AC 120-240V 50-60Hz L1303 x W140 x H153mm 6.5 kg LED PRO Architectural LED Color Bank 72 SRL-6018 LED color range Total output power Beam angle Control mode DMX channels Voltage 576 Ø5 ultra bright LEDs (123 Red, 123 Green, 123 Blue) 16.7M true 24-bit linear 20.1 W 25 DMX, Auto, Sound 32 AC 120-240V 50-60Hz L1303 x W140 x H153mm 7 kg LED Color Bank 12x8 SRL-6018S LED color range Total output power Beam angle Control mode DMX channels Voltage 72 LEDs 1 W (24 Red, 24 Green, 24 Blue) 16.7M true 24-bit linear 72W 25 DMX, Auto, Sound 32 AC 120-240V 50-60Hz L1303 x W140 x H153mm 7 kg 081

LED Vivid Wash (indoor) This catalog contains many revisions and new additions. Since there are a wide variety of LED wash options we have re-categorized some products and renamed some existing products. We have broken the LED Wash Series into the following categories to make it easier for you to understand the basic variants found within the range. Dual Pixel SRL-6020 Qty.of LEDs LED color range Total output power Beam angle Control mode DMX channels Voltage Four Pixel SRL-6021 1W power LED 16 Red, 14 Green, 14 Blue 16.7M true 24-bit linear 44W 25 DMX, Auto, Sound 7 AC 120-240V 50-60Hz L570 x W145 x H150mm 5.5 kg LED color range Total output power Beam angle Control mode DMX channels Voltage Six Pixel SRL-6022 1W power LEDs 32 Red, 28 Green, 28Blue 16.7M true 24-bit linear 88W 25 DMX, Auto, Sound 7 AC 120-240V 50-60Hz L785 x W145 x H150mm 7.5 kg LED color range Total output power Beam angle Control mode DMX channels Voltage Eight Pixel SRL-6023 1W power LEDs 48 Red, 42 Green, 42Blue 16.7M true 24-bit linear 132W 25 DMX, Auto, Sound 7 AC 120-240V 50-60Hz L1115 x W145 x H150mm 11 kg LED color range Total output power Beam angle Control mode DMX channels Voltage 1W power LEDs 64 Red, 56 Green, 56Blue 16.7M true 24-bit linear 176W 25 DMX, Auto, Sound 7 AC 120-240V 50-60Hz L1455 x W145 x H150mm 13.5 kg 0 82

LED Vivid Linear Wash II(RGB) LED Purity Linear Wash II LED PRO Architectural LED Vivid and Purity Linear Wash II fixtures are exactly like the LED Vivid Wash I with the exception of the LED type. With the advancement of LED technology Power LED 1W LED s and new beam angle lens solutions made it possible to create the LED Vivid Linear Wash II Series. LED Vivid Linear and Purity Wash II fixtures are energy saving, LED based, multiple pixel based wash fixture, Incorporating Power LED 1W LEDs depending on model. The LED Vivid Linear Wash II fixtures are RGB full color 16.7M true 24 Bit color changing Linear Wash Fixtures. LED Purity Linear Wash II fixtures are AWB (Amber White Blue) Color Correlated Temperature (CCT) linear Color temperature control from 2000, to 10,000K, and single color (A/W/B), and single color (A/W/B) Amber, White, Blue, Cool White with Warm White (WWW), Warm White (WW), and Ultra Warm White (UWW). LED Vivid and Purity Linear Wash II (RGB, CCT Color Correlated Temperature,) we term as controllable fixtures can be operated standalone, master slave with built in pre-programmed effects or directly with and standard DMX-512 controller. The LED Vivid and Purity Linear Wash II controllable fixtures are engineered with push button waterproof external LED display based user interface for setting the mode of operation or DMX Address. The LED Vivid and Purity Linear Wash II controllable fixtures use only 3 Channels of DMX to enable external programming of linear color changing, step based scenes as desired by the lighting designer. You can also add an easy to use pre-programmed external controller if you are DMX challenged such as the SRC-WASHER-100A. For more information on controller functionality refer to the control section of this catalog. LED Vivid Purity Wash II series fixtures have many variants such as: Single color versions are On and Off only and are direct to AC intelligent fixtures. (WWW) Cool White and Warm White Mix are new versions with linear CCT control from 2,000K to 10,000K which offers a different theory to CCT than AWB versions. (WW) Warm White is populated with only one (K) Kelvin Temperature of Warm White LEDs for applications that require single color incandescent energy savings wash effect. (CCT(K) as specified at time of order) (UWW) Ultra Warm White is populated with Ultra Warm White true incandescent looking LEDs for applications that require single color incandescent energy savings wash effect. Due to typeset limitations the new WWW, WW, UWW, versions specifications are not included in this catalog. For more information on how to order these versions see the order code information in this catalog. The LED Vivid and Purity Linear Wash II fixture housings are composed of Aluminum Extruded fixture housing, aluminum machined hardware, heat treated glass aperture plate. LED Vivid and Purity Linear Wash II fixtures come in either indoor or outdoor versions. Irradiant gives you more ways to Wash with LED illumination than any other manufacturer. Since there are so many choices of LED Vivid and Purity Linear Wash II fixtures we have added a new order code description section to help you make your choice. 83

Item No. LED color range Light projecting distance Data Interface Control system DMX address Fixture housing Connecting mode Connector Swing angle Beam angle Electrical Operating voltage Operating current (max) Power consumption LW-600x130-REVO-PC-120V/240V LW-1200x130-REVO-PC-120V/240V LW-1800x130-REVO-PC-120V/240V 16.7M true 24-bit linear 1W power LED 20m Standar DMX protocol compatible (RS485) DMX512 console or SRC-WASHER-100 controller Set by keys, displayed through digital tube Die Cast Powder Coated Aluminum Standard signal cord and power cord (3 or 5) Model Dependant and Order Code Dependant 0 ~ 300 25 6.5Kg (600x130) 11.5Kg (1200x130) 15Kg (1800x130) 90-264V AC/24V DC 4.5A (600x130) 9.6A (1200x130) 14A (1800x130) 108W (600x130 225.6W (1200x130) 336W (1800x130) LW-600x130-REVO-PC-INDP LW-1200x130-REVO-PC-INDP LW-1800x130-REVO-PC-INDP 16.7M true 24-bit linear 1W power LED 20m Standar DMX protocol compatible (RS485) DMX512 console or SRC-WASHER-100 controller Set by keys, displayed through digital tube Die Cast Powder Coated Aluminum Standard signal cord and power cord (3 or 5) Model Dependant and Order Code Dependant 0 ~ 300 25 6.5Kg (600x130) 11.5Kg (1200x130) 15Kg (1800x130) 90-264V AC/24V DC 4.5A (600x130) 9.6A (1200x130) 14A (1800x130) 108W (600x130 225.6W (1200x130) 336W (1800x130) LW-600x130-REVO-PC-AWB LW-1200x130-REVO-PC--AWB LW-1800x130-REVO-PC--AWB Amber, White & Blue LEDs combined to produce different brightness colors of different color tempe ratures(3000k~14000k). 1W power LED 20m Standar DMX protocol compatible (RS485) DMX512 console or SRC-WASHER-100 controller Set by keys, displayed through digital tube Die Cast Powder Coated Aluminum Standard signal cord and power cord (3 or 5) Model Dependant and Order Code Dependant 0 ~ 300 25 6.5Kg (600x130) 11.5Kg (1200x130) 15Kg (1800x130) 90-264V AC/24V DC 4A (600x130) 8A (1200x130) 12A (1800x130) 96W (600x130 192W (1200x130) 288W (1800x130) Environmental Operating temperature IP rating Built in Pre-Programmed Effects Hold color Strobing Cross fade Chasing Color cycle -20 C ~ +40 C IP65 Selectable HOLD color. (16.7m variables) Single color or transitional Cross Fade Between Colors Color Chasing Cycling -20 C ~ +40 C IP65 Selectable HOLD color. (16.7m variables) Single color or transitional Cross Fade Between Colors Color Chasing Cycling -20 C ~ +40 C IP65 Selectable HOLD color. (16.7m variables) Single color or transitional Cross Fade Between Colors Color Chasing Cycling 084

LED PRO Architectural Item No. LED color range Light projecting distance Digital interface Control system DMX address Fixture housing Aperture glass Connecting mode Connector Swing angle Beam angle Color temperature range Available in 3 or 5-Channel DMX Control Versions LW-600x130-REVO-PC-CU LW-1200x130-REVO-PC-CU LW-1800x130-REVO-PC-CU RGB 16.7M Colors True 24-Bit Linear 1W power LED 20m Standar DMX compatible DMX512 Digital tube press setting Die Cast Powder Coated Aluminum Tempered Glass Standard signal cord and power cord 3-pin signal connector 0 ~ 300 25 6.5Kg (600x130) / 11.5Kg (1200x130) / 15Kg (1800x130) (color temperature changeable) LW-600x130-REVO-PC-WY-CU LW-1200x130-REVO-PC-WY-CU LW-1800x130-REVO-PC-WY-CU 2000-10,000K CCT Adusticstic 1W power LED 20m Standar DMX compatible DMX512 Digital tube press setting Die Cast Powder Coated Aluminum Tempered Glass Standard signal cord and power cord 3-pin signal connector 0 ~ 300 25 6.5Kg (600x130) / 11.5Kg (1200x130) / 15Kg (1800x130) 1700K-14000K Electrical Operating voltage Operating current (max) Power consumption 600x130 1200x130 1800x130 90-264V AC/24V DC 4.5A 9.4A 14A 108W 225.6W 336W 600x130 1200x130 1800x130 90-264V AC/24V DC 4.5A 9.4A 14A 108W 225.6W 336W Environmental Operating temperature IP rating -20 C ~ +40 C IP65-20 C ~ +40 C IP65 085

Item No. Beam angle Light projecting distance Fixture housing Connecting mode Aperture glass (Amber) LW-600x130-REVO-PC-A LW-1200x130-REVO-PC-A LW-1800x130-REVO-PC-A 1W power LED Amber60 Amber120 Amber180 25 20m Die Cast Powder Coated Aluminum Power supply cable Tempered Glass 6.5Kg (600x130) 11.5Kg (1200x130) 15Kg (1800x130) L690xW137.5xH139mm L1290xW137.5xH139mm L1890xW137.5xH139mm (White) LW-600x130-REVO-PC-W LW-1200x130-REVO-PC-W LW-1800x130-REVO-PC-W 1W power LED White60 White120 White180 25 20m Die Cast Powder Coated Aluminum Power supply cable Tempered Glass 6.5Kg (600x130) 11.5Kg (1200x130) 15Kg (1800x130) L690xW137.5xH139mm L1290xW137.5xH139mm L1890xW137.5xH139mm Electrical Operating voltage Operating current Power consumption 90-264V AC/24V DC Max.4A Max.8A Max.16A 96watts 192watts 288watts 90-264V AC/24V DC Max.4A Max.8A Max.16A 96watts 192watts 288watts Environmental Operating temperature IP rating -20 C ~ +40 C IP65-20 C ~ +40 C IP65 086

LED PRO Architectural Item No. Beam angle Light projecting distance Fixture housing Connecting mode Aperture glass (Blue) LW-600x130-REVO-PC-B LW-1200x130-REVO-PC-B LW-1800x130-REVO-PC-B 1W power LED Blue60 Blue120 Blue180 25 20m Die Cast Powder Coated Aluminum Power supply cable Tempered Glass 6.5Kg(600x130mm) 11.5Kg(1200x130mm) 15Kg(1800x130mm) L690xW137.5xH139mm L1290xW137.5xH139mm L1890xW137.5xH139mm (Yellow) LW-600x130-PC-Y LW-1200x130-PC-Y LW-1800x130-PC-Y 1W power LED Yellow60 Yellow120 Yellow180 25 20m Die Cast Powder Coated Aluminum Power supply cable Tempered Glass 6.5Kg(600x130mm) 11.5Kg(1200x130mm) 15Kg(1800x130mm) L690xW137.5xH139mm L1290xW137.5xH139mm L1890xW137.5xH139mm Electrical Operating voltage Operating current Power consumption 90-264V AC/24V DC Max.4A Max.8A Max.16A 96watts 192watts 288watts 90-264V AC/24V DC Max.4A Max.8A Max.16A 96watts 192watts 288watts Environmental Operating temperature IP rating -20 C ~ +40 C IP65-20 C ~ +40 C IP65 087

LED Vivid Linear Wash I (RGB) LED Purity Linear Wash I LED Vivid Linear Wash I is an energy saving, LED based, multiple pixel based wash fixture, Incorporating 540, 1080, or 1620 Ultra Bright or Super Bright LEDs depending on model. The LED Vivid Linear Wash I are RGB full color 16.7M true 24 Bit color changing Linear Wash Fixtures. LED Purity Linear Wash I AWB (Amber White Blue) Color Correlated Temperature (CCT) linear Color temperature control from 2000, to 10,000K, and single color (A/W/B), and single color (A/W/B) Amber, White, Blue, Cool White with Warm White (WWW), Warm White (WW), and Ultra Warm White (UWW). LED Vivid and Purity Linear Wash I (RGB, CCT Color Correlated Temperature,) we term as controllable fixtures can be operated standalone, master slave with built in pre-programmed effects or directly with and standard DMX-512 controller. The LED Vivid and Purity Linear Wash I controllable fixtures are engineered with push button waterproof external LED display based user interface for setting the mode of operation or DMX Address. The LED Vivid and Purity Linear Wash I controllable fixtures use only 3 Channels of DMX to enable external programming of linear color changing, step based scenes as desired by the lighting designer. You can also add an easy to use pre-programmed external controller if you are DMX challenged such as the SRC-WASHER-100A. For more information on controller functionality refer to the control section of this catalog. LED Vivid Purity Wash I series fixtures have many variants such as: Single color versions are On and Off only and are direct to AC intelligent fixtures. (UWW) Ultra Warm White is populated with Ultra Warm White true incandescent looking LEDs for applications that require single color incandescent energy savings wash effect. The LED Vivid and Purity Linear Wash I fixture housings are composed of Aluminum Extruded fixture housing, aluminum machined hardware, heat treated glass aperture plate. LED Vivid and Purity Linear Wash I fixtures come in either indoor or outdoor versions. Irradiant gives you more ways to Wash with LED illumination than any other manufacturer. Since there are so many choices of LED Vivid and Purity Linear Wash I fixtures we have added a new order code description section to help you make your choice. (WWW) Cool White and Warm White Mix are new versions with linear CCT control from 2,000K to 10,000K which offers a different theory to CCT than AWB versions. (WW) Warm White is populated with only one (K) Kelvin Temperature of Warm White LEDs for applications that require single color incandescent energy savings wash effect. (CCT(K) as specified at time of order) 0 88

LED PRO Architectural Item No. LED color range Light projecting distance DMX-512 DMX channels Control modes Fixture housing Aperture cover Connecting mode Connector Swing angle Beam angle (RGB) LW-600x130-REVO-UB/SB LW-1200x130-REVO-UB/SB LW-1800x130-REVO-UB/SB RGB 16.7M Colors True 24-Bit Linear Ultra Bright LED / Super Bright LED 20m Direct DMX Control 3 Stand-Alone, Direct DMX 512, or SRC-WASHER-100 Extruded Aluminum Profile with Machined Aluminum End Caps and Hardware. Tempered Glass Standard signal cord and power cord 3-Pin XLR (In and Through) 0 ~ 300 45 5.35Kg (600x130) 9.1Kg(1200x130) 13.5Kg (1800x130) L690xW137.5XH139mm L1290xW137.5XH139mm L1890xW137.5XH139mm (RGB) LW-600x130-REVO-UB/SB-INDP-120V/240V LW-1200x130-REVO-UB/SB-INDP-120V/240V LW-1800x130-REVO-UB/SB-INDP-120V/240V RGB 16.7M Colors True 24-Bit Linear Ultra Bright LED / Super Bright LED 20m Direct DMX Control 3 Stand-Alone, Direct DMX 512, or SRC-WASHER-100 Extruded Aluminum Profile with Machined Aluminum End Caps and Hardware. Tempered Glass Standard signal cord and power cord 3-Pin XLR (In and Through) 0 ~ 300 45 5.35Kg (600x130) 9.1Kg (1200x130) 13.5Kg (1800x130) L690xW137.5XH139mm L1290xW137.5XH139mm L1890xW137.5XH139mm Electrical Operating voltage Operating current When system is not on Current on static red Current on static green Current on static blue Current on R,G,B Power consumption 600x130 1200x130 1800x130 90-264V AC/12V DC 75W 120W 220W 600x130 1200x130 1800x130 AC90-264V/12V DC (note: the current of each LED will be calculated as a unit of 20mA, but there might be a slight difference on Vf) (R,G,B ALL OFF): 200mA+/-20mA 960mA+/-40mA 1920mA+/-40mA 2880mA+/-40mA 1600mA+/-40mA 3200mA+/-40mA 4800mA+/-40mA 1600mA+/-40mA 3200mA+/-40mA 4800mA+/-40mA 4160mA+/-100mA 8320mA+/-100mA 12480mA+/-100mA 75W 120W 220W Environmental Operating temperature IP rating -20 C ~ +40 C IP65 (For Indoor Version Add Indoor to the order code.) -20 C ~ +40 C IP65 (For Indoor Version Add Indoor to the order code.) Built in Pre-Programmed Effects Hold color Strobing Cross fade Chasing Color cycle Selectable HOLD color. (16.7M variables) Single color or transitional Cross Fade Between Colors Color Chasing Cycling Selectable HOLD color. (16.7M variables) Single color or transitional Cross Fade Between Colors Color Chasing Cycling 089

Color Changing Versions Item No. LED color range Light projecting distance DMX-512 DMX channels Control modes Fixture housing Aperture cover Connecting modes Connector Swing angle Beam angle Electrical Operating voltage Operating current When system is not on Current on Static red Current on Static green Current on Static blue Current on R,G,B Power consumption (RGB) LW-600x130-REVO-UB/SB-INDOOR LW-1200x130-REVO-UB/SB-INDOOR LW-1800x130-REVO-UB/SB-INDOOR RGB 16.7M Colors True 24-Bit Linear Ultra Bright LED / Super Bright LED 20m Direct DMX Control 3 Stand-Alone, Direct DMX 512, or SRC-WASHER-100 Extruded Aluminum Profile with Machined Aluminum End Caps and Hardware. Tempered Glass Standard signal cord and power cord 3-Pin XLR (In and Through) 0 ~ 300 45 5.35Kg (600x130) 9.1Kg (1200x130) 13.5Kg (1800x130) L690xW137.5XH139mm L1290xW137.5XH139mm L1890xW137.5XH139mm 600x130 1200x130 1800x130 90-264V AC/12V DC (note: the current of each LED will be calculated as a unit of 20mA, but there might be a slight difference on Vf) (R,G,B ALL OFF): 200mA+/-20mA 960mA+/-40mA 1920mA+/-40mA 2880mA+/-40mA 1600mA+/-40mA 3200mA+/-40mA 4800mA+/-40mA 1600mA+/-40mA 3200mA+/-40mA 4800mA+/-40mA 4160mA+/-100mA 8320mA+/-100mA 12480mA+/-100mA 75W 120W 220W (RGB) LW-600x130-REVO-UB-AWB LW-1200x130-REVO-UB-AWB LW-1800x130-REVO-UB-AWB AWB (Amber White Blue) Color Correlated Temperature (CCT) linear Color temperature control from 2000, to 10,000 Ultra Bright LED / Super Bright LED 20m Direct DMX Control 3 Stand-Alone, Direct DMX 512, or SRC-WASHER-100 Extruded Aluminum Profile with Machined Aluminum End Caps and Hardware. Tempered Glass Standard signal cord and power cord 3-Pin XLR (In and Through) 0 ~ 300 45 5.35Kg (600x130) 9.1Kg (1200x130) 13.5Kg (1800x130) L690xW137.5XH139mm L1290xW137.5XH139mm L1890xW137.5XH139mm 600x130 1200x130 1800x130 90-264V AC/12V DC 50W 100W 150W Environmental Operating temperature IP rating -20 C ~ +40 C -20 C ~ +40 C IP65 (For Indoor Version Add Indoor to the order code.) 090

A, W, B Single Color Type LED PRO Architectural (Amber) (White) (Blue ) Item No. Beam angle Light projecting distance Fixture housing Connecting modes LW-600x130-REVO-UB/SB-A LW-1200x130-REVO-UB/SB-A LW-1800x130-REVO-UB/SB-A Ultra Bright LED / Super Bright LED Amber540 (600 x 130) Amber1080 (1200 x 130) Amber1620 (1800 x 130) 45 20m Aluminum alloy Power cable 5.35Kg (600 x 130) 9.1Kg (1200 x 130) 13.5Kg (1800 x 130) L690 x W137.5 x H139mm L1290 x W137.5 x H139mm L1890 x W137.5 x H139mm LW-600x130-REVO-UB/SB-W LW-1200x130-REVO-UB/SB-W LW-1800x130-REVO-UB/SB-W Ultra Bright LED / Super Bright LED White540 (600x130) White1080 (1200 x 130) White1620 (1800 x 130) 45 20m Aluminum alloy Power cable 5.35Kg (600 x 130) 9.1Kg (1200 x 130) 13.5Kg (1800x130) L690 x W137.5 x H139mm L1290 x W137.5 x H139mm L1890 x W137.5 x H139mm LW-600x130-REVO-UB/SB-B LW-1200x130-REVO-UB/SB-B LW-1800x130-REVO-UB/SB-B Ultra Bright LED / Super Bright LED Blue540 (600 x 130) Blue1080 (1200 x 130) Blue1620 (1800 x 130) 45 20m Aluminum alloy Power cable 5.35Kg (600 x 130) 9.1Kg (1200 x 130) 13.5Kg(1800 x 130) L690 x W137.5 x H139mm L1290 x W137.5 x H139mm L1890 x W137.5 x H139mm Electrical Operating voltage Power consumption 90-264V AC/24V DC 50watts 100watts 150watts 90-264V AC/24V DC 50watts 100watts 150watts 90-264V AC/24V DC 50watts 100watts 150watts Environmental Operating temperature IP rating -20 C ~ +40 C IP65 (For Indoor Version Add Indoor to the order code.) -20 C ~ +40 C IP65 (For Indoor Version Add Indoor to the order code.) -20 C ~ +40 C IP65 (For Indoor Version Add Indoor to the order code.) 091

LED Vivid Linear Wash SL II (Slim Line)(RGB) LED Purity Linear Wash SL II (Slim Line) LED Vivid and Purity Linear Wash SL II fixtures are exactly like the LED Vivid Wash II with the exception of the LED type. With the advancement of LED technology Power LED 1W LED s and new beam angle lens solutions made it possible to create the LED Vivid and Purity Linear Wash SL II Series. LED Vivid Linear and Purity Wash SL II fixtures are energy saving, LED based, multiple pixel based wash fixture, Incorporating Power LED 1W LEDs depending on model. The LED Vivid Linear Wash SL II fixtures are RGB full color 16.7M true 24 Bit color changing Linear Wash Fixtures. LED Purity Linear Wash SL II fixtures are AWB (Amber White Blue) Color Correlated Temperature (CCT) linear Color temperature control from 2000, to 10,000K, and single color (A/ W/B), and single color (A/W/B) Amber, White, Blue, Cool White with Warm White (WWW), Warm White (WW), and Ultra Warm White (UWW). LED Vivid and Purity Linear Wash SL II (RGB, CCT Color Correlated Temperature,) we term as controllable fixtures can be operated standalone, master slave with built in pre-programmed effects or directly with and standard DMX-512 controller. The LED Vivid and Purity Linear Wash II controllable fixtures are engineered with push button waterproof external LED display based user interface for setting the mode of operation or DMX Address. The LED Vivid and Purity Linear Wash SL II controllable fixtures use only 3 Channels of DMX to enable external programming of linear color changing, step based scenes as desired by the lighting designer. You can also add an easy to use pre-programmed external controller if you are DMX challenged such as the SRC-WASHER-100A. For more information on controller functionality refer to the control section of this catalog. 092

LED PRO Architectural (White) Item No. LED color range Beam angle Light spacing Data interface Control system Fixture housing Connecting mode Connector (RGB color change) LW-400-REVO-PC-12V LW-800-REVO-PC-12V LW-1200-REVO-PC-12V 16.7M Colors True 24-Bit Linear Color Changing 1W power LED 25 20m Standard DMX compatible DMX512 console or SRC-WASHER-100-A controller Die Cast Powder Coated Aluminum Standard signal cord and power cord 3-pin signal connector 1.25Kg (LW-400-REVO-PC-12V) 2.2Kg (LW-800-REVO-PC-12V) 3.2Kg (LW-1200-REVO-PC-12V) LW-400-REVO-PC-W LW-800-REVO-PC-W LW-1200-REVO-PC-W White 1W white power LED 25 20m Standard DMX compatible Die Cast Powder Coated Aluminum 1.25Kg (Blue ) LW-400-REVO-PC-B LW-800-REVO-PC-B LW-1200-REVO-PC-B Blue 1W power blue color LED 25 20m Standard DMX compatible Aluminum alloy 1.25Kg Electrical Operating voltage Operating current (max.) Power consumption 90-264V AC/12V DC 1.8A (LW-400-REVO-PC-12V) 3.6A (LW-800-REVO-PC-12V) 5.4A (LW-1200-REVO-PC-12V) 21.6W (LW-400-REVO-PC-12V) 43.2W (LW-800-REVO-PC-12V) 64.8W (LW-1200-REVO-PC-12V) 100V~240V AC/24V DC 0.132A 29.4W 100V~240V AC/24V DC 0.179A 39.8W Environmental Operating temperature IP rating -20 C ~ +40 C IP65 (For Indoor Version Add Indoor to the order code.) -20 C ~ +40 C IP65 (For Indoor Version Add Indoor to the order code.) -20 C ~ +40 C IP65 (For Indoor Version Add Indoor to the order code.) Stand Alone Preprogrammed effects Static display Flashing change Cross fade Chasing change Circulation function Static display of 16,000,000 colors by mixing colors Colors transition from high brightness to low brightness Colors alternate Colors chase one another Single color circulates regularly LED Vivid Purity Wash SL II series fixtures have many variants such as: Single color versions are On and Off only and are direct to AC intelligent fixtures. (WWW) Cool White and Warm White Mix are new versions with linear CCT control from 2,000K to 10,000K which offers a different theory to CCT than AWB versions. (WW) Warm White is populated with only one (K) Kelvin Temperature of Warm White LEDs for applications that require single color incandescent energy savings wash effect. (CCT(K) as specified at time of order) (UWW) Ultra Warm White is populated with Ultra Warm White true incandescent looking LEDs for applications that require single color incandescent energy savings wash effect. ** Due to typeset limitations the new WWW, WW, UWW, versions specifications are not included in this catalog. For more information on how to order these versions see the order code information in this catalog and ask your Sales Associate for more information. The LED Vivid and Purity Linear Wash II fixture housings are composed of a Slim Line Aluminum Extruded fixture housing, aluminum machined hardware, heat treated glass aperture plate. LED Vivid and Purity Linear Wash II fixtures come in either indoor or outdoor versions. 0 93

LED Vivid Wash III LW-330X150-LN-PC LED Vivid Wash III is an energy saving, RGB LED based, wash fixture, Incorporating 36 RGB Power LEDs the LED Vivid Wash III produces full color 16.7M true 24 Bit color changing effects for architectural and decorative illumination. LED Vivid Wash III can be operated standalone, master slave with built in pre-programmed effects or directly with and standard DMX-512 controller. The LED Vivid Wash III is engineered with push button waterproof external LED display based user interface for setting the mode of operation or DMX Address. The LED Vivid Wash III used only 3 Channels of DMX to enable external programming of linear color changing, step based scenes as desired by the lighting designer. You can also add a easy to use pre-programmed external controller if you are DMX challenged such as the SRC-WASHER-100 or SRC- 100-A. For more information on controller functionality refer to the control section of this catalog. LED color range Beam angle Light projecting distance Digital interface Control system DMX channels DMX address Fixture housing Fixture color Aperture glass Mounting system 16.7M Colors True 24-Bit Linear Color Changing 36pcs Power LED 25 C 20 m Standard DMX protocol compatible SRC-WASHER-100 SRC-WASHER-100-A 3 Set by keys, displayed through digital tube Die Cast Powder Coated Aluminum Black Standard Add a (A) to the end of the part number for White housing. Tempered glass Adjustable 360 H and 150 Vertical The LED Vivid Wash III housing is composed of Aluminum Die Cast fixture housing, heat treated glass aperture plate, rated at IP65. The unique mounting system enables easy adjustment of the projection angles from 3600 H and 1500 Vertical, enabling optimization of the effect. Electrical Operating voltage Operating current (max) Power consumption IP rating 90-264V AC/24V DC 0.2A 48Watts IP65 Environmental Operating temperature -20 C-40 C (industrial grade components) L408 x W71 x H83mm 1.25 Kg DMX Function Chart Mode 1 Pixel DMX Channels 3 Channel 1 2 3 Name Red Green Blue Vivid Wash III is available in Black or White Finish Standard. Custom Finishes upon request (Volume Dependant) Value 0-255 0-255 0-255 Function 0-100% Intensity 0-100% Intensity 0-100% Intensity 094

LED PRO Architectural LED Vivid Wash II LED Vivid Wash II is an energy saving, RGB LED based, wash fixture, Incorporating 36 RGB Power LEDs the LED Vivid Wash II produces full color 16.7M true 24 Bit color changing effects for architectural and decorative illumination. LED Vivid Wash II can be operated standalone, master slave with built in pre-programmed effects or directly with and standard DMX-512 controller. The LED Vivid Wash II is engineered with push button waterproof external LED display based user interface for setting the mode of operation or DMX Address. The LED Vivid Wash II used only 3 Channels of DMX to enable external programming of linear color changing, step based scenes as desired by the lighting designer. You can also add an easy to use pre-programmed external controller if you are DMX challenged such as the SRC-WASHER-100 or SRC-100- A. For more information on controller functionality refer to the control section of this catalog. The LED Vivid Wash II housing is composed of Aluminum Die Cast fixture housing, heat treated glass aperture plate, rated at IP65. Item No. LED color range Qty.of LEDs Beam angle Light projecting distance Digital interface Control system DMX channels Fixture housing Connecting mode Connector Aperture glass (RGB Type) LW-320*130-WP-PC-120V/240V 16.7M Colors True 24-Bit Linear Color Changing 1W power LED Red12, Green12, Blue12 25 20m Standard DMX compatible SRC-WASHER-100 SRC-WASHER-100-A 3 Channels DMX512 Console Die Cast Powder Coated Aluminum Standard signal cord and power cord 3-pin signal connector 3.9Kg L320xW145xH225mm Tempered Glass (AWB Type) LW-320*130-WP-PC-AWB-120V/240V Power LED AWB (Amber, WLED White LED, Blue) For Linear Color Correlated Temperature (CCT) Control from 2000 to 10,000K 1W power LED Amber12, White12, Blue12 25 20m Standard DMX compatible SRC-WASHER-100 SRC-WASHER-100-A 3 Channels DMX512 Console Die Cast Powder Coated Aluminum Standard signal cord and power cord 3-pin signal connector 3.9Kg L320xW145xH225mm Tempered Glass Electrical Operating voltage Operating current Power consumption 90-264V AC/24V DC Max. 2A 48watts 90-264V AC/24V DC Max. 2A 48watts Environmental Operating temperature IP rating -20 C ~ -40 C IP65-20 C ~ +40 C IP65 095

A,W,B Single Color Type Item No. Qty.of LEDs Beam angle Light projecting distance Fixture housing Connecting mode (Amber) LW-320x130-WP-PC-A-120V/240V 1W power LED Amber30 25 20m Die cast powder coated aluminum Power cord 3.9Kg L320 x W145 x H225mm (White) LW-320x130-WP-PC-W-120V/240V 1W power LED White30 25 20m Die cast powder coated aluminum Power cord 3.9Kg L320 x W145 x H225mm (Blue ) LW-320x130-WP-PC-B-120V/240V 1W power LED Blue30 25 20m Die cast powder coated aluminum Power cord 3.9Kg L320 x W145 x H225mm Electrical Operating voltage Operating current Power consumption 90-264V AC/24V DC Max. 1.7A 40watts 90-264V AC/24V DC Max. 1.7A 40watts 90-264V AC/24V DC Max. 1.7A 40watts Environmental Operating temperature IP rating -20 C ~ +40 C IP65-20 C ~ +40 C IP65-20 C ~ +40 C IP65 DMX Function Chart Mode 1 Pixel DMX Channels 3 Channel 1 2 3 Name Red Green Blue Value 0-255 0-255 0-255 Function 0-100% Intensity 0-100% Intensity 0-100% Intensity * Clayton Bay Hotel, Hiroshima, Japan Vivid Wash III is available in Black or White Finish Standard. Custom Finishes upon request (Volume Dependant) DMX Function Chart Mode 1 Pixel DMX Channels 3 Channel 1 2 3 Name Amber White Blue Vivid Wash II are available in Black or White Finish Standard. Custom Finishes upon request (Volume Dependant) Value 0-255 0-255 0-255 Function 0-100% Intensity 0-100% Intensity 0-100% Intensity 096

LED Vivid Wash 1S (Ultra Bright LED) LW-320x130-WP-UB-240V-4W-3L LED Vivid Wash 1S (Ultra-bright) is the latest version of the LED Wall Wash Series. Everything about the LED Vivid Wash 1S (Ultra-bright) is the same as with the standard version except we have removed the DMX-512 internal address function. LED PRO Architectural With the SRC-181 controller you can link up to 60 fi xtures per controller and control them via the internal multi in programs or via an external DMX-512 controller. Inmany installations there is no need to individually control each fi xtures color as the LED Vivid Wash series is often use to paint with light large surfaces such as building facades. By eliminating the individual DMX control and using the SRC-181 control the cost of the fi xtures has been greatly reduced. Vivid Wash 1S is available in Black or White Finish Standard. Custom Finishes upon request (Volume Dependant) * Kora Okey, Tokyo Kayabachyo, Japan * Private Villa, Sai Kung, Hong Kong 331 x 124 x 213mm Light Source Super Bright LED Qty 120R 120G 120B Voltage 220V Current 0.07A Power consumption 15.4W Casing Die-cast aluminum Beam angle 45 Light spacing 20 m Luminous Flux Luminance at Distance (mixed white) Item Color R G B Flux(Lm) 52.16 133.11 24.28 Power(W) 8.7 9.5 8.9 Efficacy (Lm/W) 6 14 2.7 Distance Illuminance 1 m 700 Lux 2 m 174Lux 3 m 79.6 Lux 4 m 45.24 Lux 5 m 28.03 Lux 0 97

LED Vivid Wash 1 LED Vivid Wash I is an energy saving, RGB LED based, wash fixture, Incorporating 360 RGB Ultra Bright LEDs the LED Vivid Wash I produces full color 16.7M true 24 Bit color changing effects for architectural and decorative illumination. LED Vivid Wash I can be operated standalone, master slave with built in pre-programmed effects or directly with and standard DMX-512 controller. The LED Vivid Wash I is engineered with push button waterproof external LED display based user interface for setting the mode of operation or DMX Address. The LED Vivid Wash I used only 3 Channels of DMX to enable external programming of linear color changing, step based scenes as desired by the lighting designer. You can also add an easy to use pre-programmed external controller if you are DMX challenged such as the SRC-WASHER-100 or SRC-100- A. For more information on controller functionality refer to the control section of this catalog. The LED Vivid Wash I housing is composed of Aluminum Die Cast fixture housing, heat treated glass aperture plate, rated at IP65. RGB /AWB Type Item No. LED color range Beam angle Light projecting distance Data interface Control system DMX channels Fixture housing Connecting mode Connector Aperture glass (RGB Type) LW-320x130-WP-UB/SB RGB 16.7M Linear Color Control Ultra Bright LED / Super Bright LED Red120, Green120, Blue120 45 20m Standard DMX protocol (RS485 terminal) SRC-WASHER-100 SRC-WASHER-100-A 3 Channels DMX512 Console Die Cast Powder Coated Aluminum Standard signal cord and power cord 3-Pin Control and Installation Type dependant 3.9Kg L320 x W145 x H225mm Tempered Glass (AWB Type) LW-320x130-WP-AWB Ultra bright LED AWB (Amber, WLED White LED, Blue) For Linear Color Correlated Temperature (CCT) Control from 2000 to 10,000K Ultra Bright LED / Super Bright LED Amber120, white120, blue120 45 20m Standard DMX protocol (RS485 terminal) SRC-WASHER-100 SRC-WASHER-100-A 3 Channels DMX512 Console Die Cast Powder Coated Aluminum standard signal cord and power cord 3-Pin Control and Installation Type dependant 3.9Kg L320 x W145 x H225mm Tempered Glass Electrical Operating voltage Operating current Power consumption 90-264V AC/12V DC Max. 3A 25watts 90-264V AC/12V DC Max. 3A 25watts Environmental Operating temperature IP rating -20 C ~ +40 C IP65-20 C ~ +40 C IP65 Built in Pre-Programmed Effects Hold color Strobing Cross fade Chasing Color cycle Selectable HOLD color. (16.7M variables) Single color or transitional Cross Fade Between Colors Color Chasing Cycling Selectable HOLD color. (16.7M variables) Single color or transitional Cross Fade Between Colors Color Chasing Cycling 098

LED PRO Architectural Item No. LED color range Beam angle Light projecting distance Fixture housing Connecting mode (Amber) LW-320x130-WP-A Amber LED Amber270 45 20m Die cast powder coated aluminum Power cord 3.9Kg L320 x W145 x H225mm (White) LW-320x130-WP-SB/UB-W White Super bright LED White270 45 20m Die cast powder coated aluminum Power cord 3.9Kg L320 x W145 x H225mm (Blue ) LW-320x130-WP-B Blue LED Blue270 45 20m Die cast powder coated aluminum Power cord 3.9Kg L320 x W145 x H225mm Electrical Operating voltage Operating current Power consumption 90-264V AC/124V DC Max. 1.3A 25watts 90-264V AC/12V DC Max. 1.3A 25watts 90-264V AC/12V DC Max. 1.3A 25watts Environmental Operating temperature IP rating -20 C ~ +40 C IP65-20 C ~ +40 C IP65-20 C ~ +40 C IP65 DMX Function Chart Mode 1 Pixel DMX Channels 3 Vivid Wash III is available in Black or White Finish Standard. Custom Finishes upon request (Volume Dependant) DMX Function Chart Mode 1 Pixel DMX Channels 3 Channel 1 2 3 Channel 1 2 3 Name Red Green Blue Name Amber White Blue Vivid Wash II are available in Black or White Finish Standard. Custom Finishes upon request (Volume Dependant) Value 0-255 0-255 0-255 Value 0-255 0-255 0-255 Function 0-100% Intensity 0-100% Intensity 0-100% Intensity Function 0-100% Intensity 0-100% Intensity 0-100% Intensity * Kadensa Showroom, Mexico, Mexico City 099

LED Mini RGB Washer SRL-6025RGB Total output power Control modes DMX channels Voltage Ø5 ultra bright LED 64 Red, 64 Green, 64 Blue 11.4W DMX, Auto, Sound, M/S (Linking) 6 AC 100/240V 50/60Hz L388 x W247 x H88mm 3 kg LED Mini White Washer SRL-6025W Color temperature Total output power Control modes DMX channels Voltage Ø5 ultra bright White LED 192 3500~8000K 13.3W DMX, Auto, Sound, M/S (Linking) 3 AC 100/240V 50/60Hz L388 x W247 x H88mm 3 kg 100

LED Mini UV Washer SRL-6025UV LED PRO Architectural Total output power Control modes DMX channels Voltage Purple LED 192 13.3W DMX, Auto, Sound, M/S (Linking) 3 AC 100/240V 50/60Hz L388 x W247 x H88mm 3 kg LED Wash SRL-6025 Whether you are lighting a stage, or want a wide powerful flood of strong pure colour, the new LED Wash is the unit for you. Featuring DMX, automatic, stand-alone, sound activated and master/slave modes of control the LED Wash has 648 500mW LEDs for a really powerful effect. Total output power Control modes DMX channels Voltage Ø5 ultra bright LED 213 Red, 213 Green, 213 Blue 21.7W DMX, Auto, Sound, M/S (Linking) 6 AC 100/240V 50/60Hz L430 x W280 x H120mm 6 kg 101

LED Pixel bar SSDL-6064 The New LED Pixel Bar is the very latest from t mic housing with precision engineered quick connect and quick mount systems enables rapid deployment of the LED Pixel Bar. Each LED Pixel Bar contains 3 RGB Pixels containing six (1-Watt) R, G, B LEDs for a total of 18 LEDs per pixel. The LED Pixel Bar was designed for the rigors of the road yet stylish for permanent installations. Available standard in both Black and white housings the LED Pixel Bar is extremely versatile. Used singularly as a wash fixture or in horizontal and/or vertical arrays the LED Pixel Bar adds dynamic color changing effects and chase program variables. Controllable 12 Channels of DMX-512, Auto, Sound, and Master Slave modes, the LED Pixel Bar is flexible and fully functional. Coupled with any Video to DMX control system the LED Pixel Bar can be installed in large arrays to create large LED graphics and even video displays. LED Pixel Bars are perfect for Stage, Club, Production, House of Worship, and any venue where reliable wash, blinder, color chasing, large pitch LED graphics, and video imagery is required Light Source IP Rating Beam Angle Control Modesr DMX-512 Channels (LxWxH) mm (kg) 54 x 1W High Power LEDs (3 Pixels each with 6R, 6G, 6B) 18 RGB LEDs per pixel. IP65 90/120 degree DMX512/Display Pane/Auto/Pix controller 12 476 x 87.5 x 150 8 102

LED PRO Architectural 336mm 1 2 3 4 5 6 7 8 9 10 536mm 103

LED Color bank 4 SSDL-6111 Light Source ADD: Color Working Mode DMX Control Input Powe Dimension(mm) (Kg) Lifetime Lumens Depreciation Wavelength Differential Bean Angle 300 Ø5 Ultra-Bright LEDs (75 per Pixel) Rx39, Gx18, Bx18) 16.7M 24Bit True Linear Color Control DMX, AUTO, SOUND ACTIVE, Master/Slave 4 channels AC 100-240V 60/50Hz W130 X H170 X L600 3.0 up to 100,000 hours (50,000 hours typically) +/-5nm 25 104

LED Color bank 648 SRL-6024 LED PRO Architectural Total output power Control modes DMX channels Voltage Ø5 ultra bright LED 216 Red, 216 Green, 216 Blue 42.5W DMX, Auto, Sound, M/S (Linking) 48 AC 120/240V 50/60Hz L830 x W205 x H120mm 15 kg LED Color bank 96H SRL-6024S Total output power Beam angle Control modes DMX channels Voltage 1W power LED 32 Red, 32 Green, 32 Blue 96W 25 & 10 available DMX, Auto, Sound, M/S (Linking) 48 AC 120/240V 50/60Hz L830 x W205 x H120mm 15 kg 105

LED Wash II SRL-6035 II Total output power Beam angle Control modes DMX channels Voltage Ø5 ultra bright LED 231 Red, 231 Green, 231 Blue 45.1W 25 & 10 available DMX, Auto, Sound, M/S (Linking) 5 AC 120/240V 50/60Hz L366 x W255 x H420mm 5.8 kg LED Wash I SRL-6035 I Total output power Beam angle Control modes DMX channels Voltage 1W power LED 21 Red, 21 Green, 21 Blue 63W 25 & 10 available DMX, Auto, Sound, M/S (Linking) 5 AC 120-240V 50-60Hz L366 x W255 x H420mm 5.7 kg 106

LED PRO Architectural LED Submariner I (white) LW-UW-PC-234x234-12V-W LED Submariner I(white) is a new energy savings underwater LED lighting fixture which utilizes high power (WLED) white LED as the light source. The LED Submariner I(white) offers high power white LED illumination for applications such as fountain, pond, water feature illumination, and any application with direct or indirect constant water immersion. The new Submariner mounting system enables easy adjustment of the projection angles from 3600 H and 1500 Vertical, enabling optimization of the effect. LED Submariner I(white) is low voltage and requires no additional controllers. Qty of LEDs Fixture housing Beam angle 27 pcs White LED 1W Die cast aluminum 25 Electrical Operating voltage Operating current Power consumption IP rating 12V DC 2.7A 32.5 Watt IP 68 Environmental Operating temperature Submersion depth(max.) Sustainable pressure -20 C ~ +40 C (industrial grade components) 400~2000 0.0533T/mm 2 L234 W234 H260mm 107

LED Aqua II (Power LED RGB) LW-UW-PC-DIA220-24V-PI LED Aqua II (Power LED RGB) is a energy savings underwater LED lighting fixture which utilizes high power 1W (RGB) LEDs as the light source. The LED Aqua II offers high power RGB full color mixing LED illumination for applications such as fountain, pond, water feature illumination, and any application with direct or indirect constant water immersion. LED Aqua II can be controlled in standalone mode using the SRC-AI-100 or via DMX-512 using the SRC-AI-100 to write the DMX Address to the fixture and then connected with any standard DMX-512 controller through the distribution box. LED color range Beam angle Digital interface DMX channels Control Control system DMX address setting Fixture Housing Connector 16.7M Colors True 24-Bit Linear Color Changing 1W power LED (R6,G6,B6) 25 DMX compatible (RS485 connector) 3 DMX-512 or Simple Controller SRC-AI-100 DMX console + switching power supply (or SRC-AI-100 Address Writer), synchronization controller + switching power supply SRC-AI-100 Address Writer Stainless Steel (A) or Die Cast Aluminum (B) Add A or B to the end of the part number for material type 3-pin power & signal connector Electrical Voltage rated Power consumption IP rating 24V DC 24W IP68 Environmental specifications Operating temperature Submersion depth Sustainable pressure -20 C~40 C 400 ~ 2000mm 0.0533T/mm 2 L255 x W180 x H245.4mm 108

LED Aqua I (Ultra Bright LED RGB and White) LED PRO Architectural LED Aqua I (Ultra Bright LED RGB) is an energy savings underwater LED lighting fixture which utilizes ultra bright (RGB) LEDs as the light source. The LED Aqua I offers high brightness RGB full color mixing LED illumination for applications such as fountain, pond, water feature illumination, and any application with direct or indirect constant water immersion. LED Aqua I can be controlled in standalone mode using the SRC-AI-100 or via DMX-512 using the SRC-AI-100 to write the DMX Address to the fixture and then connected with any standard DMX-512 controller through the distribution box. LED Aqua I is also available in Ultra Bright White LEDs and (2) different combinations of Ultra bright LEDs and Fixture Housing Materials which enables a broad range of price competitiveness and application. Aqua I RGB is available in three configurations Part# LA-DIA220-12V-PI-A LA-DIA220-12V-PI-B LA-DIA220-12V-PI-C The Letter Code at the end of the part number is explained below A. stainless steel fixture housing with ultra bright LEDs B. aluminum die cast fixture housing with ultra bright LEDs C. aluminum die cast fixture housing with super bright LEDs Item No. LED color range Beam angle Data interface DMX channels Control Control system DMX address setting Fixture housing Connector (RGB color changing) (white color) LA-DIA220-12V-PI LA-UB-DIA220-12V-PI-W 16.7 million colors at 24 bit white color RGB additive color mixing 360 pcs LED 270 pcs LED 45 Standard DMX protocol (RS485 terminal) 3 DMX-512 or Simple Controller SRC-AI-100 DMX console + switching power supply (or SRC-AI-100 Address Writer), synchronization controller + switching power supply SRC-AI-100 Address Writer Stainless steel 3-pin power & signal connector L255 x W180 x H245.4mm Electrical Operating voltage Power consumption 12V DC 25W 12V DC 25W Environmental Operating temperature IP rating Submersion depth Sustainable pressure -20 C - 55 C IP68-400-2000mm Below Water Surface 0.0533T/mm 2 109

LED I-Panel Light Series I-Panel is a revolutionary white LED based product designed for both commercial and household applications. I-Panel is designed to directly fit in standard drop ceilings, installed into recessed cut ins, surface mounted, or hung. I-panel can also be applied to walls as additional light sources and decorative illumination. I-Panel is being used and accepted as a modern replacement for standard flourescent tube fixtures by professional designers and architects around the world. The reasons for this are that I-Panel lasts 10 to 20 times longer than Flourescent tubes, consumes significantly less power, provides smooth consistent white light, and is not toxic to the environment. By eliminating the need for tube replacement as with flourescent fixtures, I-Panel saves you time and money. Due to the design of the LED I-Panel, the light produced emits evenly across the entire panel surface to provide balanced illumination without glare. This can reduce eye strain and associated problems of eye fatigue. Why I-Panel Item No. qty. Luminous flux of single light source Luminous flux of whole light fixture Luminous (1.5M under the lighting fixture ) Power consumption Beam angle Lifespan Eco-friendly situation 600X600 LED I-Panel 1W power LED/56pcs 55 lm 1850 lm 370~400 Lux 56W 92 100000 Hours Absolutely Typical 600X600 Grill Lamp 14W T5 Tube/3pcs 1260 lm 1773 lm 310~320 Lux 42W 80-85 15000~20000 Hours Contains mercury Remote Control I-Panel with its state of the art white LED technology is unlike conventional fluorescent illumination in that it is dimmable. I-Panel installs directly into existing and standard electrical systems and can be dimmed via conventional AC dimmers. I- Panel Remote is an optional IR remote control that enables wireless dimming within a range of 10 meters from the fixture. Select 10 levels of light comfort with the I-Panel Remote. Control distance Data interface Power Carrier wave frequency 10 meters Infrared 2 x 1.5V AAA DC Batteries 38 Hz L130 x W44.5 x H20mm 110

1200 High Power LED I-Panel K0013 LED PRO Architectural Luminous flux CT Warm white Pure white Cold white Voltage White 56x1W LED 1650lm 5800K 3000K~4000K 5500K~7500K 8000K~10000K AC 100-240V 50-60 Hz L1200 x W300 x H36mm 600 High Power LED I-Panel K0023 Luminous flux CT Warm white Pure white Cold white Voltage White 56x1W LED 1850lm 5800K 3000K~4000K 5500K~7500K 8000K~10000K AC 100-240V 50-60 Hz L600 x W600 x H36mm 300 High Power LED I-Panel K0033 Luminous flux CT Warm white Pure white Cold white Voltage White 24x1W LED 1050lm 5800K 3000K~4000K 5500K~7500K 8000K~10000K AC 100-240V 50-60 Hz L300 x W300 x H36mm 111

1200 Superbright LED I-Panel K0073 Luminous flux CT Voltage White 420x0.2W LED 2000lm 6300K AC 100-240V 50-60Hz L1200 x W300 x H12.5mm 600 Superbright LED I-Panel K0083 Luminous flux CT Voltage White 430x0.2W LED 2000lm 6300K AC 100-240V 50-60Hz L600 x W600 x H12.5mm 300 Superbright LED I-Panel K0093 Luminous flux CT Voltage White 105x0.2W LED 640lm 6000K AC 100-240V 50-60Hz L300 x W300 x H12.5mm 112

LED Color Panel 60x60 (Non-Direct DMX) LP-LR-60x60-120V LP-LR-60x60-120V(W) LP-LR-60x60-240V LP-LR-60x60-240V(W) LED PRO Architectural LED Color Panel 60 x 60 is an energy saving, RGB LED based, non-direct DMX controllable, color changing, decorative panel. The physical structure is composed of white powder coated steel fixture housing with a molded ABS anti UV treated Milky White light diffusing cover. The LED Color Panel 60 x 60 contains a matrix of 288 Super Bright LEDs which under standalone or DMX control produces dynamic color changing effects. LED Color Panel 60 x 60 can be applied individually or to create walls of color changing effects. LED Color Panel 60 x 60 can be controlled in standalone mode using the SDL-109C1 6.0A or via DMX-512 using the SDL-109C1 6.0A to write the DMX Address to the fixture and then connected with any standard DMX-512 controller through the distribution box. LED Color Panel 60 x 60 is available as a 120 or 240V AC Fixture with two types (Indoor) or Waterproof for outdoor application. Add a (W) to the end of the Part number to identify that you want a waterproof type. Luminance Central beam Operating temperature Operating humidity IP rating Controlling Mode Controller Input connection Output connection Electrical Input voltage Operating voltage Operating current Power consumption 288pcs (R96, G96, B96) 141Lm 7400mcd 20 C ~ +45 C 0~95% IP65 Stand Alone (SDL-109C1 6.0A) DMX 512 See Above Explanation of control system options 4-pin male connector 4-pin female connector 100-240V AC 12V DC 2.8A 33.6W Structural Housing cover Fixture material Molded ABS Milky White PC Diffuse #45 Steel White Powder Coated L600 x W600 x H145mm 7.2kg Light Output Color Total output (lumens) Power (watts) Efficacy (lm/w) White 141 17.4 8.1 Red 18.2 3.8 4.8 Green 87.8 6.8 12.9 Blue 28 6.8 4.1 113

LED Color Panel 30x60 (Non-Direct DMX) LP-LR-30x60-120V LP-LR-30x60-120V(W) LP-LR-30x60-240V LP-LR-30x60-240V(W) LED Color Panel 60 x 30 is an energy saving, RGB LED based, non-direct DMX controllable, color changing, decorative panel. The physical structure is composed of white powder coated steel fixture housing with a molded ABS anti UV treated Milky White light diffusing cover. The LED Color Panel 60 x 30 contains a matrix of 144 Super Bright LEDs which under standalone or DMX control produces dynamic color changing effects. LED Color Panel 60 x 30 can be applied individually or to create walls of color changing effects. LED Color Panel 60 x 30 can be controlled in standalone mode using the SDL-109C1 6.0A or via DMX-512 using the SDL-109C1 6.0A to write the DMX Address to the fixture and then connected with any standard DMX-512 controller through the distribution box. LED Color Panel 60 x 30 is available as a 120 or 240V AC Fixture with two types (Indoor) or Waterproof for outdoor application. Add a (W) to the end of the Part number to identify that you want a waterproof type. Luminance Central beam Operating temperature Operating humidity IP rating Controlling Mode Controller Input connection Output connection Electrical Input voltage Operating voltage Operating current Power consumption 144pcs (R48, G48, B48) 70 Lm 7400mcd 20 C ~ +45 C 0~95% IP65 Stand Alone (SDL-109C1 6.0A) DMX 512 See Above Explanation of control system options 4-pin male connector 4-pin female connector 100-240V AC 12V DC 1.4A 16.8W Structural Housing cover Fixture material Molded ABS Milky White PC Diffuse #45 Steel White Powder Coated L600 x W300 x H145mm 4.1kg Light Output Color Total output (lumens) Power (watts) Efficacy (lm/w) White 70.5 8.7 8.1 Red 9.1 1.9 4.8 Green 43.9 3.4 12.9 Blue 14 3.4 4.1 114

LED Color Panel 30x30 (Non-Direct DMX) LP-LR-30x30-120V-DMX LP-LR-30x30-120V-DMX(W) LP-LR-30x30-240V-DMX LP-LR-30x30-240V-DMX(W) LED PRO Architectural LED Color Panel 30 x 30 is available as a 120 or 240V AC Fixture with two types (Indoor) or Waterproof for outdoor application. Add a (W) to the end of the Part number to identify that you want a waterproof type. LED Color Panel 30 x 30 is an energy saving, LED based, nondirect DMX controllable, single color changing, decorative panel. The physical structure is composed of white powder coated steel fixture housing with a molded ABS anti UV treated Milky White light diffusing cover. The LED Color Panel 30 x 30 contains a matrix of 76 Super Bright LEDs which under standalone or DMX control produces single color changing effects. LED Color Panel 30 x 30 can be applied individually or to create walls of single color changing effects. LED Color Panel 30 x 30 can be controlled in standalone mode using the SDL-109C1 6.0A or via DMX-512 using the SDL-109C1 6.0A to write the DMX Address to the fixture and then connected with any standard DMX-512 controller through the distribution box. Luminance Central beam Operating temperature Operating humidity IP rating Controlling Mode Controller Input connection Output connection 72pcs (R23, G23, B23) 35Lm 7400mcd 20 C ~ +45 C 0~95% IP65 DMX console 4-pin male 4-pin female Electrical Input voltage Operating voltage Operating current Power consumption 100-240V AC 12V DC 1A 5W Structural Housing cover Material of socket Opaque ABS(ANTI-UV) 45# thin steel board (with sprayed white power on the surface) L300 x W300 x H135mm 2.2kg Light Output Color Total output (lumens) Power (watts) Efficacy (lm/w) White 37.8 4.6 8.1 Red 4.8 1.0 4.8 Green 23.2 1.8 12.9 Blue 7.4 1.8 4.1 115

LED Construction Pane Series (Outdoor) LED Construction Pane Series (Outdoor) is a unique color changing construction wall panel that is made of PMMA acrylic contained in an attractive aluminum profile frame which is lined with RGB LEDs. The LED light projected into the edge of the PMMA acts like a lens of sorts which contain the light evenly from one side to the other. With opposing banks of LEDs the light and light color transitions are even and consistent across the transparent or opaque type acrylic faces. When the light is on the illumination effect almost makes the panel appear non-see through. LED Construction Pane (outdoor) is IP65 rated and can be applied outdoors. LED Construction Panes (outdoor) can be controlled via internal pre-stored programs, external SRC-261, or via any Standard DMX console. The DMX Address and or standalone master slave functions are set via a built in LED user menu interface located on the rear of the panel. Item No. LED color range Luminance (White balanced) Input voltage Operating voltage Power consumption Operating temperature Operating humidity IP rating Control modes DMX channels Input signal connector Output singnal connector Fixture profile material Fixture pane material LP-600x600-ARCHI-12V-Outdoor 192pcs (R64, G64, B64) 16.7M Colors True 24-Bit Linear Color Changing 21.5Lm (transparent area) (opaque area) 96-240V AC/50-60Hz 12V DC 24W 20 C ~ +45 C 0~95% IP65 Stand-alone M/S, SRC-261, or DMX-512 24 3-pin XLR 3-pin XLR Aluminum with Oxidized Finish PMMA (Acrylic) Transparent or Semi-Transparent Etched L600 x W600 x H26mm 6.3 kg LP-1200x600-ARCHI-12V-Outdoor 384pcs (R128, G128, B128) 16.7M Colors True 24-Bit Linear Color Changing 42.8Lm (transparent area) (opaque area) 96-240V AC/50-60Hz 12V DC 48W 20 C ~ +45 C 0~95% IP65 Stand-alone M/S, SRC-261, or DMX-512 48 3-pin XLR 3-pin XLR Aluminum with Oxidized Finish PMMA (Acrylic) Transparent or Semi-Transparent Etched L1200 x W600 x H26mm 11.2 kg LP-1800x600-ARCHI-12V-Outdoor 576pcs (R192, G192, B192) 16.7M Colors True 24-Bit Linear Color Changing 64.5Lm (transparent area) (opaque area) 96-240V AC/50-60Hz 12V DC 72W 20 C ~ +45 C 0~95% IP65 Stand-alone M/S, SRC-261, or DMX-512 72 3-pin XLR 3-pin XLR Aluminum with Oxidized Finish PMMA (Acrylic) Transparent or Semi-Transparent Etched L1800 x W600 x H26mm 16.1 kg 116

LED Construction Pane Series (Indoor) LED Construction Pane Series is a unique color changing construction wall panel that is made of PMMA acrylic contained in an attractive aluminum profile frame which is lined with RGB LEDs. The LED light projected into the edge of the PMMA acts like a lens of sorts which contain the light evenly from one side to the other. With opposing banks of LEDs the light and light color transitions are even and consistent across the transparent or semi transparent acrylic faces. When the light is on the illumination effect almost makes the panel appear non-see through. LED PRO Architectural LED Construction Panes can be controlled via internal prestored programs, external SRC-261, or via any Standard DMX console. The DMX Address and or standalone master slave functions are set via a built in LED user menu interface located on the rear of the panel. Semi-Transparent versions are transparent with a etched surface. Item No. LED color range Luminance (White balanced) Input voltage Operating voltage Power consumption Operating temperature Operating humidity IP rating Control modes DMX channels Input signal connector Output singnal connector Fixture profile material Fixture pane material LP-600x600-ARCHI-12V-Indoor 192pcs (R64, G64, B64) RGB 21.5Lm (transparent area) (opaque area) 96-240V AC/50-60Hz 12V DC 24W 20 C ~ +45 C 0~95% IP65 Stand-alone M/S, SRC-261, or DMX-512 24 3-pin XLR 3-pin XLR Aluminum with Oxidized Finish PMMA (Acrylic) Transparent or Semi-Transparent Etched L600 x W600 x H26mm 6.3 kg LP-1200x600-ARCHI-12V-Indoor 384pcs (R128, G128, B128) RGB 42.8Lm (transparent area) (opaque area) 96-240V AC/50-60Hz 12V DC 48W 20 C ~ +45 C 0~95% IP65 Stand-alone M/S, SRC-261, or DMX-512 48 3-pin XLR 3-pin XLR Aluminum with Oxidized Finish PMMA (Acrylic) Transparent or Semi-Transparent Etched L1200 x W600 x H26mm 11.2 kg LP-1800x600-ARCHI-12V-Indoor 576pcs (R192, G192, B192) RGB 64.5Lm (transparent area) (opaque area) 96-240V AC/50-60Hz 12V DC 72W 20 C ~ +45 C 0~95% IP65 Stand-alone M/S, SRC-261, or DMX-512 72 3-pin XLR 3-pin XLR Aluminum with Oxidized Finish PMMA (Acrylic) Transparent or Semi-Transparent Etched L1800 x W600 x H26mm 16.1 kg 117

LED Pane (Slim Type) LR-A-30x30-24V LED Slim Pane Series (indoor) is a unique color changing construction wall panel that is made molded ABS frame which is lined with RGB LEDs. The LED light projected into the edge of the Opaque Acrylic which acts like a lens of sorts which contain the light evenly from one side to the other. With opposing banks of LEDs the light and light color transitions are even and consistent across the opaque acrylic faces. LED Construction Panes (indoor) can be controlled via an external SL-410-1A simple controller of up to 4 panes, or via the SRC-171 controller which can control up to 50 panes. Connect any Standard DMX console to the SRC-171 for non-direct DMX-512 control. Qty. of PCB Luminance Central beam Operating temperature Operating humidity Controlling Mode Controller Input connection Output connection Electrical Input voltage Operating voltage Power consumption 72pcs (R24, G24, B24) 2pcs 40Lm 35cd 20 C ~ +60 C 0~95% SL-410L or SRC-171 (SL-410L 1A x 4pcs, SRC-171 X 50pcs) 4-pin male connector 4-pin female connector 220-240V AC 12V DC 5.76W (Max.) Product Through-light panel material Base material Mounting stand Lvory-white acrylic (ANTI-UV) 1Cr18Ni9Ti, ABS 800mm L300 x W300 x H21mm 1.1 kg Light Output Color Total output (lumens) Power (watts) Efficacy (lm/w) White 37.8 4.6 8.2 Red 4.8 1.0 4.8 Green 23.2 1.8 12.9 Blue 7.4 1.8 4.1 118

LED Decoration series (outdoor) The LED Cube is great for chill-out zones or as you can see, filling and decorating ceiling areas. Colour changing is controlled with a dedicated controller and as the units are rated at IP66 they are suitable for outdoor areas as well as inside the club. LED PRO Architectural The LED Ball has the same features as the Cube, but by virtue of it s spherical form provides an attractive combination when used together with the Cubes. They look great when used in multiples, both Cubes and Balls together. Introduction for SRC-241&SRC-241A: Controller Special controller for LED Balls and LED Cubes, one controler can control up to 12pcs LED Balls or LED Cubes. 4 Channels or 48 Channels DMX-512, stand-alone mode. for outdoor version Item No. IP rating Control Voltage SRL-6009C(LED Cube) 27 Red, 36 Green, 18 Blue IP 66 SRC-241 DC 24V L300 x W300 x H300mm 3.4 kg SRL-6010C(LED Ball) 27 Red, 36 Green, 18 Blue IP 66 SRC-241 DC 24V Ø300mm 3.2 kg SRL-6011C(LED Ball) 40 Red, 56 Green, 28 Blue IP 66 SRC-241A DC 24V Ø500mm 5.8 kg 119

LED Ball and Cube (indoor) The new indoor LED Ball and Cubes and now available! Each ball and cube can be individually controlled by DMX-512, auto or sound active, via the built in control system. For indoor applications this is an excellent option as these units can be placed anywhere you want to put them and are not constrained by the requirement of a centralized external main controller. Simply hang them, run power, connect the 3-Pin XLR DMX signal and your balls and cubes are glowing! Operation modes: DMX-512 Console, Sound-active, Master/ slave. for outdoor version Item No. Control modes DMX channels Voltage SRL-6009S(LED Cube) 27 Red, 36 Green, 18 Blue DMX, Auto,Sound, M/S(Lingking) 6 120V/240V L300 x W300 x H300mm 3.4 kg SRL-6010S(LED Ball) 27 Red, 36 Green, 18 Blue DMX, Auto,Sound, M/S(Lingking) 6 120V/240V Ø300mm 3.2 kg SRL-6011S(LED Ball) 40 Red, 56 Green, 28 Blue DMX, Auto,Sound, M/S(Lingking) 6 120V/240V Ø500mm 5.8 kg SRL-6038(LED Ball) 440 Red, 490 Green, 280 Blue DMX, Auto,Sound, M/S(Lingking) 6 120V/240V Ø1000mm 18 kg 120

Ø38 DMX LED Mini Tube LN-MN-Ø38*300-DMX LN-MN-Ø38*600-DMX LN-MN-Ø38*1000-DMX LED PRO Architectural Ø38 LED DMX Mini Tube AP RGB is the latest full color energy savings LED linear Tube solution designed for professional color changing projects. Ø38 LED DMX Mini Tube AP RGB can be controlled via any standard DMX-512 controller with 3, 4, and 5 channel configurations as well as the SRC-Pixdot- PC control system. Ø38 LED DMX Mini Tube AP RGB is constructed of a professional extruded aluminum profile with an optically clear polycarbonate cover and professional mounting system. The Ø38 LED DMX Mini Tube AP RGB comes in 3 standard lengths which are 300, 600, and 1000mm. Item No. LED color range Beam angle Power input Power output Output current of switching power supply Control modes Power Connected tube qty. of each adapter Luminous flux Light efficiency DMX channels LN-MN-Ø38*300-DMX LN-MN-Ø38*600-DMX 16.7M Colors True 24-Bit Linear Color Changing Super bright Red, Green, and Blue LEDs 85 x 40 100-240V AC 12V DC 8.5A DMX-512 45 LEDs (15R, 15G, 15B) 4.0W 20 PCS 23Lm 1.4 lm/w RGB 3 90 LEDs (30R, 30G, 30B) 8W 10 PCS 40Lm 2.0 lm/w PRGB 4 LN-MN-Ø38*1000-DMX 135 LEDs (45R, 45G, 45B) 12W 7 PCS 56Lm 2.4 lm/w PW1RGB 5 121

DMX Mini LED Tube (indoor) LN-MN-300-12V-SW-4CH LN-MN-300-12V-SW-3/5CH Ø38 LED DMX Mini Tube PC (RGB) is one of the most popular energy saving LED RGB accent and cove illumination products. Encased in a black injection molded plastic housing with clear polycarbonate (PC) cover are full color Ø5 RGB LED s which can produce 16.7 million colors to include white with full linear RGB intensity control. Ø38 LED DMX Mini Tube PC (RGB) is offered with three different control configurations which are 3, 4, and 5 channels respectively. (See DMX Functionality Chart below for more information). The Ø38 LED DMX Mini Tube PC (RGB) products can be controlled by and standard DMX-512 controller or DMX-512 matrix PC style controllers that output standard DMX-512. LN-MN-300-12V-SW-4CH (4channel DMX mini LED tube) LN-MN-300-12V-SW-3/5CH (3 or 5 channel DMX mini LED tube) LED color range Qty. of LED Beam angle Housing Input connector (power) Input connector (signal) Output connector (power)output Connector (signal) Signal transmission cable 16.7 million (true color 24), different level of color changing High Brightness R/G/B LED 45LEDs (R15 G15 B15) 85 x 40 Black PC Lower, Clear PC Upper, Clear PC Mounting Brackets 2-pin male 4-pin male 2-pin female 4-pin female 4-pin double twist signal cable Control Communication protocol Connector Control mode Signal transport DMX512 RS485 Stand-alone or DMX512 One SDL-109P power source for every 20 tubes Electrical Power xonsumption Power input Power output Output electric current Neon tube for each power source Middle power supply Power/signal distributor Max.4.8W Min.1.4W 100-240V AC 12V DC 8.5A 20 tubes SDL-109P(3/5channel) SRC-PS-DST-12V-1/1O(4channel) 122

Mini LED Tube LN-MN-Ø38*300-DMX LN-MN-Ø38*1000-DMX LED PRO Architectural Low voltage Mini LED Tube, an advanced LED decorative linear lighting, is based on RGB technology, controlled and powered by SRC-171 controller with full color changing effects. It can also be broadly expanded by linking multiple units of SRC-171 controllers to a programmable DMX controller. This product can be used widely for indoor decoration such as exhibition halls, restaurants, gallery, nightclub, bar, etc. To avoid power overload and/or signal degression, please make sure that one SRC-171 controller can only connect up to 60 pieces of LN-MN-300-24V-M, or 20 pieces of LN-MN- 1000-24V-M. Item No. LED light source Luminous flux (lm) Beam angle Wavelength (nm) VF value Operating power Operating current Operating voltage Operating temperature Humidity range Controller Maximum load LN-MN-300-24V-M Super bright LEDs 15 Red, 15 Green, 15 Blue 21.3 85 x 40 R: 620-630, G: 510-520, B: 470-480 R: 1.9-2.3, G: 3.0-3.8, B: 3.0-3.8 3.84W 0.160A 24V DC L343xW30xH38mm 0.2Kg -20 C ~45 C 0-95% SRC-171 60 pcs LN-MN-1000-24V-M Super bright LEDs 45 Red, 45 Green, 45 Blue 64 85 x 40 R: 620-630, G: 510-520, B: 470-480 R: 1.9-2.3, G: 3.0-3.8, B: 3.0-3.8 11.52W 0.480A 24V DC L1010xW30xH38mm 0.35Kg -20 C ~45 C 0-95% SRC-171 20 pcs 123

Mini LED Tube LED Mini Tube-O-ND-DMX is an energy saving, lower cost, Non-Direct DMX controlled, outdoor, low voltage, linear RGB color changing accent and cove fixture. Connected to the SRC-181 controller power supply controller the LED Mini Tube-O-ND-DMX can be set to playback selectable grammed color changing transitions automatically. Connect pre-prothe SRC-181 controller to a standard DMX console to indirectly control the LED Mini Tube-O-ND-DMX via the SRC-181. LED Mini Tube-O-ND-DMX is a non-intelligent fixture which means all functionality is provided by the controller and external interfaces. For more information on the SRC-181 refer to Page# P502-507 of this catalog. Item No. Luminous flux (lm) Beam angle Wavelength (nm) VF value Operating power Operating current Operating voltage(src-181) Operating temperature Humidity range Control Controller Maximum load per SRC-181 LN-MN-300-120V-M LN-MN-300-120V-MB Super Bright LEDs R: 15, G: 15, B: 15 21.3 85 x 40 R: 620-630, G: 510-520, B: 470-480 R: 1.9-2.3, G: 3.0-3.8, B: 3.0-3.8 7.2W 0.06A 120V AC L360 x W30 x H46mm 0.2Kg -20 C ~60 C 0-95% Non-Direct DMX/SRC-181 SRC-181-120V 200 pcs LN-MN-600-120V-M LN-MN-600-120V-MB Super Bright LEDs R: 30, G: 30, B: 30 42.5 85 x 40 R: 620-630, G: 510-520, B: 470-480 R: 1.9-2.3, G: 3.0-3.8, B: 3.0-3.8 7.2W 0.06A 120V AC L690xW30xH46mm 0.3Kg -20 C ~60 C 0-95% Non-Direct DMX/SRC-181 SRC-181-120V 100 pcs LN-MN-1000-120V-M LN-MN-1000-120V-MB Super Bright LEDs R: 45, G: 45, B: 45 64 85 x 40 R: 620-630, G: 510-520, B: 470-480 R: 1.9-2.3, G: 3.0-3.8, B: 3.0-3.8 12W 0.1A 120V AC L1030xW30xH46mm 0.38Kg -20 C ~60 C 0-95% Non-Direct DMX/SRC-181 SRC-181-120V 60 pcs LN-MN-600-240V-M LN-MN-600-240V-MB Super Bright LEDs R: 30, G: 30, B: 30 42.5 85 x 40 R: 620-630, G: 510-520, B: 470-480 R: 1.9-2.3, G: 3.0-3.8, B: 3.0-3.8 14.4W 0.06A 240V AC L660xW30xH46mm 0.3Kg -20 C ~60 C 0-95% Non-Direct DMX/SRC-181 SRC-181-240V 150 pcs LN-MN-1000-240V-M LN-MN-1000-240V-MB Super Bright LEDs R: 45, G: 45, B: 45 64 85 x 40 R: 620-630, G: 510-520, B: 470-480 R: 1.9-2.3, G: 3.0-3.8, B: 3.0-3.8 14.4W 0.06A 240V AC L1000xW30xH46mm 0.38Kg -20 C ~60 C 0-95% Non-Direct DMX/SRC-181 SRC-181-240V 100 pcs (Low Voltage & Waterproof) LN-MN-300-12V-M Super Bright LEDs R: 15, G: 15, B: 15 21.3 85 x 40 R: 620-630, G: 510-520, B: 470-480 R: 1.9-2.3, G: 3.0-3.8, B: 3.0-3.8 3.5W 0.29A 12V DC L375xW45xH45mm 0.2Kg -20 C ~60 C 0-95% Non-Direct DMX/SRC-181 SRC-181-12V 50 pcs 124 LN-MN-600-12V-M Super Bright LEDs R: 30, G: 30, B: 30 42.5 85 x 40 R: 620-630, G: 510-520, B: 470-480 R: 1.9-2.3, G: 3.0-3.8, B: 3.0-3.8 7W 0.58A 12V DC L705xW45xH45mm 0.28Kg -20 C ~60 C 0-95% Non-Direct DMX/SRC-181 SRC-181-12V 25 pcs LN-MN-1000-12V-M Super Bright LEDs R: 45, G: 45, B: 45 64 85 x 40 R: 620-630, G: 510-520, B: 470-480 R: 1.9-2.3, G: 3.0-3.8, B: 3.0-3.8 10.5W 0.87A 12V DC L1035xW45xH45mm 0.35Kg -20 C ~60 C 0-95% Non-Direct DMX/SRC-181 SRC-181-12V 16 pcs LN-MN-300-24V-M(W) Super Bright LEDs R: 15, G: 15, B: 15 21.3 85 x 40 R: 620-630, G: 510-520, B: 470-480 R: 1.9-2.3, G: 3.0-3.8, B: 3.0-3.8 3.84W 0.16A 24V DC L375xW45xH45mm 0.2Kg -20 C ~60 C 0-95% Non-Direct DMX/SRC-181 SRC-181-24V 60 pcs LN-MN-600-24V-M(W) Super Bright LEDs R: 30, G: 30, B: 30 42 85 x 40 R: 620-630, G: 510-520, B: 470-480 R: 1.9-2.3, G: 3.0-3.8, B: 3.0-3.8 7.6W 0.32A 24V DC L705xW45xH45mm 0.28Kg -20 C ~60 C 0-95% Non-Direct DMX/SRC-181 SRC-181-24V 30 pcs LN-MN-1000-24V-M(W) Super Bright LEDs R: 45, G: 45, B: 45 64 85 x 40 R: 620-630, G: 510-520, B: 470-480 R: 1.9-2.3, G: 3.0-3.8, B: 3.0-3.8 11.5W 0.48A 24V DC L1035xW45xH45mm 0.35Kg -20 C ~60 C 0-95% Non-Direct DMX/SRC-181 SRC-181-24V 20 pcs

LED Clear Oval RGB O-ND-DMX Tube (Non-Direct DMX) LN-MC-A40B24-120V-II LN-MC-A40B24-240V-II LED PRO Architectural LED Clear Oval RGB O-ND-DMX is another of our most popular LED Tube products. LED Clear Oval RGB O-ND-DMX is an energy saving RGB LED color changing tube that is engineered with either a clear polycarbonate tube or aluminum profile base with clear PC cover. Through the process of light refraction one beam with an illumination angle of 100 is projected to the inner surface of the clear cap. The oval tube structure assures a wider viewing angle. LED Clear Oval RGB O-ND-DMX is a non-direct DMX controllable product and requires a external controller which can be operated in stand-alone or with DMX-512 to playback preprogrammed color changing and effects. Item No. Luminance Operating temperature Operating humidity IP rating LN-MC-A40B24-120V-II 144PCS (R48, G48, B48) 106Lm 20 C ~ +45 C 0~95% IP65 LN-MC-A40B24-240V-II Control Controller Signal input connector Signal output connector SDL-109C1 5.1A version controller 4-pin male connector 4-pin female connector Electrical Input Operating voltage Current Power consumption 100-240V AC 12V DC 1.4A Max. 16.8W 125

LED DMX Tube LN-MC-500-DMX LN-MC-1000-DMX LED DMX Tube is an advanced tube design and the latest version of our LED Tube. The LED DMX Tube is a graphics and color changing grade tube that can be set to 1, 2, 4, 8, and 16 pixels per tube. LED DMX Tubes come in half meter (500mm) and 1 meter versions. The LED DMX Tube uses the very latest in high quality (RGB) LED s to provide high luminosity even and consistent colors. The LED DMX Tube can be directly controlled by DMX-512, PC Graphics Control, or a stand-alone graphics playback system. Installing Method clamping method Item No. Luminance Operating temperature Operating humidity IP rating Controlling Mode Individual control Computer control DMX controlling Signal input connector Signal output connector Electrical Input voltage Current Power consumption Structure Material of light tube Material of lamp holder LN-MC-500-DMX 72PCS (R24, G24, B24) 30Lm 20 C ~ +60 C 0~95% IP65 SRC-236DL control PC+SRC-236DL Universal DMX512 signal control 5-pin male connector 5-pin female connector AC 100-240V 50-60Hz 0.7A 8.4W Milky White PC (anti-uv) Aluminum Alloy 1.0kg LN-MC-1000-DMX 144PCS (R48, G48, B48) 64Lm 20 C ~ +60 C 0~95% IP65 SRC-236DL control PC+SRC-236DL Universal DMX512 signal control 5-pin male connector 5-pin female connector AC 100-240V 50-60Hz 1.4A 16.8W Milky White PC (anti-uv) Aluminum Alloy 1.8Kg 126

LED Multicolor ND-DMX Tube (Non-Direct DMX) LN-MC-DIA50-12V LN-MC-DIA50-120V/240V LED PRO Architectural LED Multicolor ND-DMX Tube is energy savings, multi-color LED, non-direct DMX, controllable, outdoor, tube product. LED Multicolor ND-DMX Tubes are designed for stand-alone applications or by direct DMX control of the SDL-109C1 6.0A controller (sold separately). Whether in stand-alone or mode or under DMX control the LED Multicolor ND-DMX Tubes produce vivid color changing effects, chasing, strobing and other exciting effects. LED Multicolor ND-DMX Tubes come in either high voltage or low voltage versions and can be applied both indoors and out. High voltage versions of the LED Multicolor ND-DMX Tubes require no additional power supplies. LED Multicolor ND-DMX Tube is a non-intelligent fixture which means all functionality is provided by an external controller SDL-109C1 6.0A. For more information on the SDL-109C1 6.0A refer to Page# P502-507 of this catalog. Item No. Luminance Operating temperature Operating humidity IP rating LN-MC-DIA50-12V 144PCS (R48, G48, B48) 64Lm 20 C ~ +45 C 0~95% IP64 LN-MC-DIA50-120V/240V 144PCS (R48, G48, B48) 64Lm 20 C ~ +45 C 0~95% IP64 Installing Method There are two methods to install the fixture accordingly, please refer to the diagram to install the LEDNEON Tube. Controlling Mode Controller Input connection Output connection DMX control SDL-109C1 5.1A version 4-pin male connector 4-pin female connector SDL-109C1 6A and DMX-512 controller SDL-109C1 5.1A version / SDL-109C1 together with DMX512 4-pin male connector 4-pin female connector SDL-109C1 6A and DMX-512 controller Electrical Input Operating voltage Current Power consumption 100-240V AC 12V DC 1.4A Max. 16.8W 100-240V AC 12V DC 1.4A Max. 16.8W Method one: clamping method Structure Material of light tube Channel Milky white polycarbonate (anti-uv) Aluminum alloy (with surface oxidized) 1.0kg L1000 x W50 x H75mm Milky white polycarbonate (anti-uv) Aluminum alloy (with surface oxidized) 1.5kg L1000 x W50 x H95mm 127

LED Multicolor EC-ND-DMX Tube (Economical)(Non-Direct DMX) LN-MC-DIA50-(ECO)-120V LN-MC-DIA50-(ECO)-240V LED Multicolor EC ND-DMX Tube is energy savings, cost savings, multi-color LED, non-direct DMX, controllable, outdoor, tube product. LED Multicolor EC ND-DMX Tubesare designed for stand-alone applications or by direct DMX control of the SDL-109C1 6.0A controller (sold separately). Whether in stand-alone or mode or under DMX control the LED Multicolor EC ND-DMX Tubes produce vivid color changing effects, chasing, strobing and other exciting effects with 4 pixel segments. LED Multicolor EC ND-DMX Tubes come in either high voltage or low voltage versions and can be applied both indoors and out. High voltage versions of the LED Multicolor EC ND-DMX Tubes require no additional power supplies. LED Multicolor ND-DMX Tube is a non-intelligent fixture which means all functionality is provided by an external controller SDL-109C1 6.0A. For more information on the SDL-109C1 6.0A refer to Page# 502-507 of this catalog. Installing Method clamping method Item No. Luminance Operating temperature Operating humidity IP rating Controlling Mode Controller Input connection Output connection LN-MC-DIA50-(ECO)-120V 144PCS (R48, G48, B48) 64Lm 20 C ~ +45 C 0~95% IP65 SDL-109C1 6A controller 4-pin male connector 4-pin female connector LN-MC-DIA50-(ECO)-240V Electrical Input Operating voltage Current Power consumption Structure Material of light tube Channel 100-240V AC 12V DC 1.4A Max. 16.8W Milky white polycarbonate Aluminum alloy 1.5kg L1000 x W50 x H75mm 128

LED Neon Flex (Professional) Professional LED Neon Flex uses Superior Grade Ultra Bright LED s that are strictly consistent in wavelength specification by +/- 5nm. The outer jacket of the LED Neon Flex (Professional) is constructed of two layers of PVC which has an effect on the optical enhancement of the LED color and light transmission efficiency. As such LED Neon Flex (Professional) maintains the highest stability and lowest amount of lumens depreciation over time longer-life. Additionally LED Neon Flex (Professional) is structured with a white PVC base jacket that is designed to reflect shape the light that is emitting from the LED and to redirect the light upward and outward to the surface of the product thus enhancing the actual and perceived brightness. All of the factors above also contribute to the lack of Chromatic Aberrations with (Professional) type LED Neon Flex. LED PRO Architectural LED Neon Flex (Professional) is offered in all the latest available colors to include Warm White, Ultra-Warm White, and Hot Pink. See comparison charts at the end of the LED Neon Flex (Economical) Section New Added Colors to the LED Hot Pink and Warm White Warm white Hot Pink Features and Benefits Consistent and Stringent Wavelength control standards +/-5nm New Ultrabright LEDs Flexible Unique PVC double jacket design White PVC Base Layer to increase luminosity 100% unbreakable 100% waterproof Low Voltage Safety Low Heat Extra Long Life Easy to Install Low Maintenance Costs 1/10 the energy consumption of glass neon 129

Low Voltage, Low Energy Used The 24V LED Neon Flex consumes only 1.8W/ Ft. (R) or 1.44W / Ft. (Y, O, B, G, W, W22, P). High and Even Brightness LED Neon Flex is comprised of a string of LED s spaced at a specific distance apart sufficient illuminate the specially designed oval-shaped encapsulating jacket to produce light with uniformity and neon-like brightness with no chromatic aberrations. 11 x 20mm LED Duralight 2WRTVE (LED-FL-3W) Item No. Length in Roll LED Spacing Total LED Qty Total Watts LED Qty/Unit Cutting unit Watt/Unit Color Color Temperature LNH-FX-10-240V LNH-FX-50-240V LNH-FX-30-240V LNH-FX-150-240V LNH-FX-30-24V LN-FX-10-24V LN-FX-50-24V LN-FX-30-120V LN-FX-150-120V LN-FX-30-24V 9.1M 9.1M 10M 18.8M 48.8M 19.4M 30FT 150FT 30FT 9.1M 9.1M 10M 48.8M 48.8M 49.4M 30FT 150FT 30FT 12.7MM 12.7MM 12.7MM 12.7MM 12.7MM 0.5 0.5 0.5 0.5 0.5 720 720 792 3840 3840 3888 720 720 720 3600 3600 3600 720 720 720 792 3840 3840 3888 720 720 720 3600 3600 3600 720 720 720 36W 28.8W 39.6W 192W 153.6W 194.4W 36W 28.8W 36W 180W 144W 180W 54W 43.2W 43.2W 36W 28.8W 39.6W 192W 153.6W 194.4W 36W 28.8W 36W 180W 144W 180W 54W 43.2W 43.2W 120 120 72 120 120 72 60 60 36 60 60 36 8 8 6 120 120 72 120 120 72 60 60 36 60 60 36 8 8 6 1.52M 1.52M 0.91M 1.52M 1.52M 0.91M 2.5FT 2.5FT 1.5FT 2.5FT 2.5FT 1.5FT 1/3FT 1/3FT 1/4FT 1.52M 1.52M 0.91M 1.52M 1.52M 0.91M 2.5Ft 2.5Ft 1.5Ft 2.5Ft 2.5Ft 1.5Ft 1/3Ft 1/3Ft 1/4/Ft 3.94W/M 3.15W/M 3.94W/M 3.94W/M 3.15W/M 3.94W/M 1.2W/FT 0.96W/FT 1.2W/FT 1.2W/FT 0.96W/FT 1.2W/FT 1.8W/FT 1.44W/FT 1.44W/F 3.94W/M 3.15W/M 3.94W/M 3.94W/M 3.15W/M 3.94W/M 1.2W/Ft 0.96W/Ft 1.2W/Ft 1.2W/Ft 0.96W/Ft 1.2W/Ft 1.8W/Ft 1.44W/ft 1.44W/Ft R Y,O B,G,P W W22 R Y,O B,G,P W W22 R Y,O B,G,P W W22 R Y,O B,G,P W W22 R Y,O B,G,P W W22 R Y,O G,B R Y,O G,B R Y,O G,B R Y,O G,B R Y,O G,B 5000K 2200K 5000K 2200K 5000K 2200K 5000K 2200K 5000K 2200K Max.Loading Length (with 1.6A converter) 97M 122M 96M 96M 97M 122M 96M 96M 160FT 200FT 159FT 159FT 160FT 200FT 159FT 159FT 21FT 26FT 26FT 26FT 97M 122M 96M 97M 122M 96m 160Ft 200Ft 159Ft 160Ft 200Ft 159Ft 21Ft 26Ft 26Ft Light Output (LNH-FX) Color Pink White22 Red Yellow Orange Blue Green Total output (Lm/Ft) 8 17.3 8.34 7.28 8.4 4.8 9.03 Recommended operating temperature and humidity: -20 C to 60 C, 100% humidity White 15.2 Light Output (LN-FX) Color Red Yellow Orange Green Blue Total output (Lm/Ft) 3.4 3.6 4.2 6 1.3 Recommended operating temperature and humidity: -20 C to 60 C, 100% humidity White 7 130

LED Neon Flex (Economical) LED Neon Flex (Economical) is the latest version in its fam - ily developed to meet low cost requirements for specific market. Most of factors remain the same, such as cover material, copper wire, craftwork. Compared with Pro - fessional, it is much lower in cost, but accordingly it sacrifices in certain degree of brightness, quality assurance, illumination evenness and so on. Please contact us for details. LED Neon Flex TM Professional and Economical Specification Professional Economical Color Red Qty. LED per unit Unit (meter) 120 1.52 120 1.52 120 1.52 72 0.91 72 0.91 72 0.91 72 0.91 72 0.91 100 1.5 100 1.5 100 1.5 60 0.91 60 0.91 50 0.91 Not Available Not Available Yellow Orange Blue Green White Pink Warm White LED PRO Architectural Comparison Between Professional and Economical Features Professional Economical Notes LED type Special Ultra Bright LED Standard Brightness LED Professional LED Neon-Flex uses Superior Grade Ultra Bright LED s while the Eco - nomical offers quality Standard Brightness LED s LED spacing LED s /uhit Unit measurment LED spec PVC Base jacket Stability MTBF (lifetime) Lumens depreciation Color consistency Chormatic aberrations Percieved brightness UV treatment Warranty AC power supply Low voltage Available colors Cost to manufacture Pricing 1.27CM See Unit Chart See Unit Chart (+/- 5nm) Two Layer White PVC High Stability Longer MTBF 50,000 to 80,000 hours Consistant None High Yes 12 Months Same Same Higher Standard Market Value 1.5CM See Unit Chart See Unit Chart +/- 10nm Single Layer None Average Stability Shorter MTBF 40,000 to 60,000 hours Some inconsitancy s can occur Yes Lower Yes 6 Months Same Different Same Lower Lower Prices State of the art equipment to test each LED which enables us to ensure consitency of color (wavelength) and to offer multi-tier grades of products based upon the ability to select chips according to their tolerance to our standards. The outter jacket if the LED Neon Flex is constructed of PVC and based on the two grades Professional and Economical either a double or single layer of PVC is applied. This has an effect on the optical enhancement of the LED color and light transmission efficiency. The function of the White Base Jacket in the Professional Professional is to reflect shape the light that is emitting from the LED to redirect the light upward and outward to the surface of the product. Thus enhancing the actual and percieved brightness of the Professional. Stability of each grade is directly corresponding to the quality of the LED applied within each Grade. The Professional which uses the highest quality LED would therefore have enhanced stability over the Economical. However the quality of the Economical LED still conforms to our minimum stability standards which are considered still higher than the general market standard. Lifetime is termed by the lighting industry as MTBF (Mean Time Between Failure) which is when 50% of tradition lamps fail. For LED we use Lumens Deprecitaion as it is relative to SSL (Solid State Lighting) See LED Lifetime information below for a more indepth explaination of Lumens Depreciation The consitency of the Economical can fluxtuate due to the LED Spec standard of +/- 10nm and the single PVC layer process. The Professional offers the maximum consitency which is relative to its high standard. Chromatic Aberrations are inconsitencies in the color consitency that occur when wavelengths are not matched coupled with less diffusive materials such as in single layer PVC processing of the exterior jacket. Professional LED Neon-Flex has the highest percieved brightness due to all the factors listed in this chart. However, Economical has been engineered to provide a high brightness for the value. UV treatment effects cost very little and is incorporated into both to enhance both Professional and Economical s ability to be used in high UV areas such as areas exposed to direct sunlight. See indivdual product data sheets for the specific load requirements. The cut length of Economical has been adjusted so that the quantity of LEDs per unit and the power consumtion matches so that the same power supplies can be used. * Warm White and Ultra Warm White are available only in Professional Based on the information provided in this table there is a clear and distinct difference between grades thus different price structures apply. 131

LED Neon-Flex (color jacket) LED Neon Flex (Color Jacketed) embodies every feature and benefit of the (Grade A) LED Neon Flex with the addition of a colored outer PVC jacket. In some applications it is more desirable to have the color of the jacket match the color of the light emitted so that in the daytime the LED Neon Flex applied design can be seen without the LEDs being powered on. Typically the LED Neon Flex (Color Jacketed) is applied to signage designs or architectural designs that are indoor or outdoor in close proximity to the view of people. Item No. Length in roll LED spacing Qty.of LEDs Total watts Qty.of LED per unit Cutting unit Watts per meter or foot LED color Max.loading length (with 1.6A converter) LN-FX(C)-10-240V 9.1m 9.1m 0.5 0.5 720 720 36W 28.8W 120 120 1.52m 1.52m 3.94w/m 3.15w/m R Y, O 97m 122m 10.0m 0.5 792 39.6W 72 0.91m 3.94w/m G, B 96m LN-FX(C)-50-240V 48.8m 48.8m 0.5 0.5 3840 720 192W 153.6W 120 120 1.52m 1.52m 3.94w/m 3.15w/m R Y, O 97m 122m Features and Benefits Color jacket matches the LED color emitted for daytime or non-illuminated decorative applications. Consistent and Stringent Wavelength control standards +/-5nm New Ultrabright LEDs Flexible Unique PVC double jacket design with outer layer color jacket White PVC Base Layer to increase luminosity 100% unbreakable 100% waterproof Low Voltage Safety Low Heat Extra Long Life Easy to Install Low Maintenance Costs 1/10 the energy consumption of glass neon 49.4m 0.5 3888 194W 72 0.91m 3.15w/m G, B 96m LN-FX(C)-30-120V LN-FX(C)-150-120V LN-FX(C)-30-24V 30Ft 0.5 150Ft 0.5 30Ft 0.5 720 36W 60 2.5Ft 720 28.8W 60 2.5Ft 720 36W 36 1.5Ft 3600 180W 60 2.5Ft 3600 144W 60 2.5Ft 3600 180W 36 1.5Ft 720 54W 8 1/3Ft 720 43.2W 8 1/3Ft 1.2W/Ft 0.96W/Ft 1.2W/Ft 1.2W/Ft 0.96W/Ft 1.2W/Ft 1.8W/Ft 1.44W/Ft R 160Ft Y, O 200Ft G, B 159Ft R 160Ft Y, O 200Ft G, B 159Ft R 21Ft Y, O 26Ft 720 43.2W 6 1/4Ft 1.44W/Ft G, B 26Ft Light Output Color Red Yellow Orange Green Blue Total output (lm/ft) 4.4 8.6 6.8 9 4 132

Crystal LED Neon Flex Crystal LED Neon Flex embodies every feature and benefit of the (Professional) LED Neon Flex with an optical enhancement to the PVC jacket material. LED PRO Architectural Crystal LED Neon Flex was designed with a optically transparent PVC jacket to increase the brightness of the product to enhance far field viewing. Crystal LED Neon Flex applied to structures that are intended to be viewed from long distances such as bridges and high-rise skyscraper type structures offers greater luminosity at distance. Up close the Crystal LED Neon Flex appears pixilated however at far field viewing distances appears solid just like the LED Neon Flex (Professional) type. LED Neon Flex (Professional) type is intended for more near field viewing thus requires the milky PVC jacket for even light distribution. Often a combination of both LED Neon Flex (Professional) and Crystal LED Neon Flex is applied to projects. LED Neon Flex (Professional) type is used to provide evenly distributed illumination where the viewing public will be in close proximity and Crystal LED Neon Flex for areas that will be significantly far away from the viewing public. Features and Benefits Optically transparent PVC jacket offers brighter results in areas that are far from the viewing public. Consistent and Stringent Wavelength control standards +/-5nm New Ultrabright LEDs Flexible Unique Optically Clear PVC double jacket design White PVC Base Layer to increase luminosity 100% unbreakable 100% waterproof Low Voltage Safety Low Heat Extra Long Life Easy to Install Low Maintenance Costs 1/10 the energy consumption of glass neon Item No. Length in roll LED spacing Qty.of LEDs Total watts Qty.of LED per unit Cutting unit Watts per meter or foot LED color Max.loading length (with 1.6A converter) CLN-FX-10-240V 9.1m 9.1m 0.5 0.5 720 720 36W 28.8W 120 120 1.52m 1.52m 3.94w/m 3.15w/m R Y, O 97m 122m 10.0m 0.5 792 39.6W 72 0.91m 3.94w/m G,B,W 96m CLN-FX-50-240V 48.8m 48.8m 0.5 0.5 3840 3840 192W 153.6W 120 120 1.52m 1.52m 3.94w/m 3.15w/m R Y, O 97m 122m 49.4m 0.5 3888 194W 72 0.91m 3.94w/m G,B,W 96m CLN-FX-30-120V CLN-FX-150-120V CLN-FX-30-24V 30Ft 0.5 150Ft 0.5 30Ft 0.5 720 36W 60 2.5Ft 720 28.8W 60 2.5Ft 720 36W 36 1.5Ft 3600 180W 60 2.5Ft 3600 144W 60 2.5Ft 3600 180W 36 1.5Ft 720 54W 8 1/3Ft 720 43.2W 8 1/3Ft 1.2W/Ft 0.96W/Ft 1.2W/Ft 1.2W/Ft 0.96W/Ft 1.2W/Ft 1.8W/Ft 1.44W/Ft R 160Ft Y, O, 200Ft G,B,W 159Ft R 160Ft Y, O 200Ft G,B,W 159Ft R 21Ft Y, O 26Ft 720 43.2W 6 1/4Ft 1.44W/Ft G,B,W 26Ft Light Output Color Red Yellow Orange Green Blue Total output (lm/ft) 9.2 9.2 16.2 22 7.67 White 18.2 133

Crystal LED Neon Flex (Color Jacketed) Crystal LED Neon Flex (Color Jacketed) embodies every feature and benefit of the (Professional) LED Neon Flex with an optical and color enhancement to the PVC jacket material. Crystal LED Neon Flex (Color Jacketed) was designed with a optically transparent and pigmented PVC jacket to increase the brightness of the product to enhance far field viewing and to lend itself well to daytime viewed designs. Crystal LED Neon Flex (Color Jacketed) applied to structures that are intended to be viewed from long distances such as bridges and high-rise skyscraper type structures and where the designer desires the product to appear the same color when the product is not illuminated. Up close the Crystal LED Neon Flex (Color Jacketed) appears pixilated however at far field viewing distances appears solid just like the LED Neon Flex (Professional) type. LED Neon Flex (Professional) type is intended for more near field viewing thus requires the milky PVC jacket for even light distribution. Often a combination of both LED Neon Flex (Color Jacketed) and Crystal LED Neon Flex (Color Jacketed) is applied to projects depending on their proximity to the intended viewers. Features and Benefits Combines all the benefits of both Crystal LED Neon-Flex and LED Neon Flex Color Jacketed. Item No. Length in roll LED spacing Qty.of LEDs Total watts Qty.of LED per unit Cutting unit Watts per meter or foot LED color Max.loading length (with 1.6A converter) CLN-FX(C)-10-240V 9.1m 9.1m 0.5 0.5 720 720 36W 28.8W 120 120 1.52m 1.52m 3.94w/m 3.15w/m R Y, O 97m 122m 10.0m 0.5 792 39.6W 72 0.91m 3.94w/m G, B 96m CLN-FX(C)-50-240V 48.8m 48.8m 0.5 0.5 3840 720 192W 153.6W 120 120 1.52m 1.52m 3.94w/m 3.25w/m R Y, O 97m 122m 49.4m 0.5 3888 194W 72 0.91m 3.94w/m G, B 96m CLN-FX(C)-30-120V CLN-FX(C)-150-120V CLN-FX(C)-30-24V 30Ft 0.5 150Ft 0.5 30Ft 0.5 720 36W 60 2.5Ft 720 28.8W 60 2.5Ft 720 36W 36 1.5Ft 3600 180W 60 2.5Ft 3600 144W 60 2.5Ft 3600 180W 36 1.5Ft 720 54W 8 1/3Ft 720 43.2W 8 1/3Ft 1.2W/Ft 0.96W/Ft 1.2W/Ft 1.2W/Ft 0.96W/Ft 1.2W/Ft 1.8W/Ft 1.44W/Ft R 160Ft Y, O 200Ft G, B 159Ft R 160Ft Y, O 200Ft G, B 159Ft R 21Ft Y, O 26Ft 720 43.2W 6 1/4Ft 1.44W/Ft G, B 26Ft Light Output Color Red Yellow Orange Green Blue Total output (lm/ft) 7 12 15.4 14.33 2.33 134

RGB LED Neon Flex RGB LED Neon Flex embodies all the benefits of LED Neon-Flex (A-Grade) with the additional of RGB color changing technology. RGB LED Neon-Flex provides complete RGB color changing through intensity changes of the R, G, B, LEDs. LED PRO Architectural RGB LED Neon Flex incorporates new Ultrabright LEDs to enhance the products brightness. RGB LED Neon Flex is a perfect replacement where traditional al glass neon is applied in various colors to achieve a color changing appearing effect. ect. RGB LED Neon Flex provides virtually 16.7 million colors of linear color changing. Features and Benefits Full RGB linear color control of up to 16.7M colors. Consistent and Stringent Wavelength control standards +/-5nm New Ultrabright LEDs Flexible Unique PVC double jacket White PVC Base Layer to increase luminosity Controllable color changing effects 100% unbreakable 100% waterproof Low Voltage Safety Low Heat Extra Long Life Easy to Install Low Maintenance Costs 1/10 the energy consumption of glass neon Item No. Length in roll LED spacing Qty.of LEDs Total watts Qty.of LED per unit Cutting unit Watts per meter or foot LED color range Max.loading length LN-FX-RGB-25-240V 24.7m 0.5 5832 324W 216 0.91m 13.1W/m RGB 120m with SRC-191-3C-240V controller LN-FX-RGB-81-120V 81Ft 0.5 5832 324W 108 1.5Ft 4W/Ft RGB 200Ft with SRC-191-3C-120V controller LN-FX-RGB-81-24V 81Ft 0.5 5832 388.8W 18 1/4Ft 4.8W/Ft RGB 33Ft with SRC-191-3C-24V controller 135

Crystal RGB LED Neon Flex Crystal RGB LED Neon Flex embodies all the benefits of RGB LED Neon-Flex with the additional of a optically hanced clear PVC jacket design. The clear jacket design pro- envides greater luminosity for far field viewing applications as with the Crystal LED Neon-Flex. When viewed in a near field manner the LED source is easily defined however at long distances from the viewing audience Crystal RGB LED Neon Flex appears even and consistent as with RGB LED Neon Flex. Crystal RGB LED Neon Flex incorporates new Ultrabright LEDs to enhance the products brightness. RGB LED Neon Flex is a perfect replacement where traditional glass neon is applied in various colors to achieve a color changing ing effect and when the viewing distance is far field. Crystal appear- RGB LED Neon Flex provides virtually 16.7 million colors of linear color changing. Features and Benefits Provides all the Features and Benefits of RGB LED Neon Flex Increased Luminosity for far field viewing. Item No. Length in roll LED spacing Total watts Qty.of LED per unit Cutting unit Watts per meter or foot LED color range Max.loading length CLN-FX-RGB-25-240V 24.7m 0.5 5832 324W 216 0.91m 13.1W/m RGB 120m with SRC-181-240V controller CLN-FX-RGB-81-120V 81Ft 0.5 5832 324W 108 1.5Ft 4W/Ft RGB 200Ft with SRC-181-120V controller CLN-FX-RGB-81-24V 81Ft 0.5 5832 388.8W 18 1/4Ft 4.8W/Ft RGB 33Ft with SRC-181-24V controller 136

Mini LED Neon Flex (Color Jacketed) Mini LED Neon-Flex (Color Jacketed) embodies all the features and benefits of Mini LED Neon Flex however the outer PVC jacket is colorized to match the LED illumination color for day time viewing. LED PRO Architectural Features and Benefits Mini LED Neon-Flex (Color Jacketed) embodies all advantages of Mini LED Neon-Flex Outer PVVC jacket is colorized to match the illuminated LED color for daytime viewing. Item No. Length in roll LED spacing Qty.of LEDs Total watts Qty.of LED per unit Cutting unit Watts per meter or foot LED color range Max.loading length (with 1.6A converter) MLN-FX-10-240V 9.1m 9.1m 0.5 0.5 720 720 36W 28.8W 120 120 1.52m 1.52m 3.94w/m 3.15w/m R Y, O 97m 122m 10.0m 0.5 792 39.6W 72 0.91m 3.94w/m G,B,W 96m MLN-FX-50-240V 48.8m 48.8m 0.5 0.5 3840 3840 192W 153.6W 120 120 1.52m 1.52m 3.94w/m 3.25w/m R Y, O 97m 122m 49.4m 0.5 3888 194.4W 72 0.91m 3.94w/m G,B,W 96m MLN-FX-30-120V MLN-FX-150-120V MLN-FX-30-24V 30Ft 0.5 150Ft 0.5 30Ft 0.5 720 36W 60 2.5Ft 720 28.8W 60 2.5Ft 720 36W 36 1.5Ft 3600 180W 60 2.5Ft 3600 144W 60 2.5Ft 3600 180W 36 1.5Ft 720 54W 8 1/3Ft 720 43.2W 8 1/3Ft 1.2W/Ft 0.96W/Ft 1.2W/Ft 1.2W/Ft 0.96W/Ft 1.2W/Ft 1.8W/Ft 1.44W/Ft R 160Ft Y, O 200Ft G,B,W 159Ft R 160Ft Y, O 200Ft G,B,W 159Ft R 21Ft Y, O 26Ft 720 43.2W 6 1/4Ft 1.44W/Ft G,B,W 26Ft 137

Ultra-thin LED Neon Flex Ultra-thin LED Neon-Flex embodies all the features and benefits of LED Neon Flex however the Physical profile is engineered smaller to facilitate additional types of applications where a smaller profile is required. Additionally Ultra-thin LED Neon-Flex incorporates a flexible PCB with the latest in SMD LED technology. Item No. ULN-FX-240V ULN-FX-120V ULN-FX-100V ULN-FX-24V ULN-FX-12V Length per roll LED spacing Total watts Qty.of LED per unit Cutting unit Watts per meter LED color range Max.loading length (with 1.6A converter) 252W 120 1.2M 5W/M R,Y,O 76.8M 50.4M 8X25mm 10mm 5040 336W 72 0.72M 6.67W/M B,W G 57.6M 252W 60 0.6M 5W/M R,Y,O 38.4M 50.4M 8X25mm 10mm 5040 Features and Benefits Smallest physical product size in the LED Neon Flex to enable new applications. Smallest bend angle of all the LED Neon Flex products SMD LED Technology Consistent and Stringent Wavelength control standards +/-5nm New Ultrabright LEDs Flexible Unique PVC double jacket White PVC Base Layer to increase luminosity Controllable color changing effects 100% unbreakable 100% waterproof Low Voltage Safety Low Heat Extra Long Life Easy to Install Low Maintenance Costs 1/10 the energy consumption of glass neon 336W 36 0.36M 6.67W/M B,W G 28.8M 210W 60 0.6M 4.17W/M R,Y,O 38.4M 50.4M 8X25mm 10mm 5040 280W 36 0.36M 5.56W/M B,W G 28.8M 378W 8 0.08M 7.5W/M R,Y,O 5.12M 50.4M 8X25mm 10mm 5040 403.2W 6 0.06M 8W/M B,W G 4.8M 378W 4 0.04M 7.5W/M R,Y,O 2.56M 50.4M 8X25mm 10mm 5040 403.2W 3 0.03M 8W/M B,W G 2.4M Light Output Color Red Yellow Orange Green Blue Total output (lm/ft) 6.19 7.52 8.29 9.14 7.72 Recommended storage & operating temperature: -20 C to 60 C, 100% humidity. White 20.02 138

LED Duralight 3WRTVE (3-Wire Rectangular Vertically Emitting) LED Duralight 3WRTVE is a single color LED linear rope light solution that is offered in a variety of colors and power supply options. The physical housing of this product is rectangular and the LEDs are situated to emit the light to both sides directly with some diffuse light vertically through the clear PVC housing. The third wires enables the addition of a second color and enables chasing or as some people refer to it as flowing effect. Color chasing is realized using a simple 3 wire Dura- light controller. LED PRO Architectural 11 x 20mm LED Duralight 2WRTVE (LED-FL-3W) Item No. LED-FL-3W-90-240V LED-FL-3W-90-120V LED-FL-3W-90-100V LED-FL-3W-90-24V LED-FL-3W-90-12V Length in roll LED spacing Watts per meter Watt per meter or foot Unit length Qty.of LED per unit 480W 5.3W/m 1.8m (RG) 144pcs 90m 12.5mm 7200pcs 288W 3.2W/m 3m(R,Y,O) 240pcs 480W 5.3W/m 1.8m(G,B,W) 144pcs 480W 1.62W/Ft 0.9m (RGB) 72pcs 90m 12.5mm 7200pcs 288W 0.98W/Ft 1.5m(R,Y,O) 120pcs 480W 1.62W/Ft 0.9m(G,B,W) 72pcs 400W 1.34W/Ft 0.9m(RGB) 72pcs 90m 12.5mm 7200pcs 240W 0.82W/Ft 1.5m (R,Y,O) 120pcs 400W 1.34W/Ft 0.9m(G,B,W) 72pcs 432W 4.8W/m 0.3m(RGB) 24pcs 90m 12.5mm 7200pcs 288W 3.2W/m 0.3m(R,Y,O) 24pcs 576W 6.4W/m 0.15m(G,B,W) 12pcs 432W 1.46W/Ft 0.15m(RG) 12pcs 90m 12.5mm 7200pcs 288W 0.98W/Ft 0.15(R,Y,O) 12pcs 576W 1.95W/Ft 0.75m(G,B,W) 6pcs * Available Colors (Any Two): Clear PVC Extruded Tube with any color of ultra-bright ø3mm LED. (Red, Yellow, Yellow Green, Blue, Green, Cool White, Orange) 139

LED Duralight 4/5WRTVE LED Duralight 4/5WRTVE is a single color LED linear rope light solution that is offered in a variety of colors and power supply options. The physical housing of this product is round and the LEDs are situated to emit the light horizontally directly with some diffuse light vertically through the clear PVC housing. The 4 wire type enables the addition of a third color which is typically configured as RGB. The 5th wire enables the addition of a fourth color which is typically configured as RGBY. Additionally the colors can be individually controlled to produce color mixes of the primary colors using a simple. (4/5-Wire Rectangular Vertically Emitting) 11.5 x 30mm LED Duralight 4/5WRTVE (LED-FL-4W-RGB) Item No. LED-FL-4W-RGB-240V LED-FL-4W-RGB-120V LED-FL-4W-RGB-100V LED-FL-4W-RGB-24V LED-FL-4W-RGB-12V Length in roll LED Spacing Watts Watt per meter or foot Unit length Qty.of LED per unit 54m 12.5mm 4320pcs 288W 5.3W/m 2.7m 216pcs 54m 12.5mm 4320pcs 288W 5.3W/m 1.35m 108pcs 54m 12.5mm 4320pcs 240W 4.4W/m 1.35m 108pcs 54m 12.5mm 4320pcs 288W 5.3W/m 0.45m 36pcs Available Colors: Clear or Milky White PVC Extruded Tube with RGB (4-Wire) Standard Colors. Ask your sales representative about custom configurations 90m 12.5mm 4320pcs 288W 5.3W/m 0.225m 18pcs 11x22mm LED Duralight 4/5WRTVE (LED-FL-11X22-4W-RGB) Item No. LED-FL-11X22-4W-RGB-240V LED-FL-11X22-4W-RGB-120V LED-FL-11X22-4W-RGB-100V LED-FL-11X22-4W-RGB-24V LED-FL-11X22-4W-RGB-12V Length in roll LED spacing Watts Watt per meter or foot Unit length Qty.of LED per unit 54m 9.26mm 5832pcs 778W 14.4W/m 1m 108pcs 54m 9.26mm 5832pcs 389W 7.2W/m 1m 108pcs 54m 9.26mm 5832pcs 324W 6W/m 1m 108pcs 54m 9.26mm 5832pcs 388.8W 7.2W/m 0.33m 36pcs Available Colors: Clear or Milky White PVC Extruded Tube with RGB (4-Wire) Standard Colors. Ask your sales representative about custom configurations 90m 9.26mm 5832pcs 388.8W 7.2W/m 0.167m 18pcs 11.5x30mm LED Duralight 4/5WRTVE (LED-FL-5W-RGYB) Item No. LED-FL-5W-RGYB-240V LED-FL-5W-RGYB-120V LED-FL-5W-RGYB-100V LED-FL-5W-RGYB-24V LED-FL-5W-RGYB-12V Length in roll LED spacing Watts Watt per meter or foot Unit length Qty.of LED per unit 54m 6.94mm 7776pcs 518.4W 9.6W/m 2m 288pcs 54m 6.94mm 7776pcs 518.4W 9.6W/m 1m 144pcs 54m 6.94mm 7776pcs 432W 8W/m 1m 144pcs 54m 6.94mm 7776pcs 466.6W 8.64W/m 0.33m 48pcs Available Colors: Clear or Milky White PVC Extruded Tube with RGB (4-Wire) Standard Colors. Ask your sales representative about custom configurations 90m 6.94mm 7776pcs 466.6W 8.64W/m 0.167m 24pcs 140

LED PRO Architectural LED Linear Ribbon Flex II (Super Bright SMD LED) (Single Color) LBLU(FX)-H-SMD3528-W-14.5-24V-10x286 LED Linear Ribbon Flex II is an innovative product which incorporates a flexible circuit board and cutting-edge SMD LED technology. The flexible PCB can be bent to a maximum radius of 2cm. LED Linear Ribbon Flex II is available in single LED colors such as Red, Green, Yellow, Blue, and White. In the WLED (white LED version) the LED Linear Ribbon Flex II is brighter than a similarly applied T5 fluorescent lamp. The product comes supplied with a pre-applied super slim doublesided tape which makes installation very convenient. LED Linear Ribbon Flex II is designed for long linear applications, complex signage and structures, convex, concave and other curved surfaces and objects. Features and Benefits Flexible with a maximum bend radius of 2cm Super Bright SMD LED technology single color Dimmable (Using Dimmable Low Voltage PSU) Can be applied to curved and complex structures Energy Savings Low Voltage Item No. Unit size Volt Witts LED spacing Current Max loading LED color Life span Max length With power LBLU(FX)-H-SMD3528-W-14.5-24V-10x286 10x286mm 24V 1.92W/strip 14.5mm 20mA 25mA W/R/G/B/Y 100,000hrs 7.15m with 24V/2.5A Installation Example Can be bent easily at any angle with high flexibility. 1. Cut to desired length only on the closest cut mark printed on the product. 2. Expose the adhesive side by removing the cover layer of the double sided tape affixed to the product. 3. Adhere the product to the desired place. 4. Any angle connection. 5. In-line connection. 6. Solder leads to switching power supply. 141

LED Linear Ribbon Flex I (RGB) (Super Bright SMD 3-in-1 RGB) (Non-Direct DMX) (Low Voltage) FCB-SMD6050-20-24V-14X505 LED Linear Ribbon Flex I is an innovative product which incorporates a flexible circuit board and cutting-edge RGB 3- in1smd LED technology. The flexible PCB can be bent to a maximum radius of 2cm. LED Linear Ribbon Flex (RGB) is dimmable and color controllable using linear modulation covering the entire RGB visual spectrum. The product comes supplied with a pre-applied super slim double-sided tape which makes installation very convenient. LED Linear Ribbon Flex I (RGB) is designed for long linear applications, complex signage and structures, convex, concave and other curved surfaces and objects. Features and Benefits Flexible with a minimum bend radius of 2cm SMD LED RGB technology (16.7 million colors) 255 levels of dimming R, G, B Dimming: 0-100% Can be applied to curved and complex structures Controllable via DMX 512, Auto Master Slave (Optional Controller) Directly controlable by simple controller such as SL-410 DMX controllable via SRC-181 Item No. FCB-SMD6050-20-24V-14X505 LED color RGB LED type Qty. of LED per meter Unit size SMD6050 Top LED 50 100x14x2.8mm Cutting length 100mm Input voltage Max. power 24V 14.4 W/M Max.meter(s)per 2.5A switching PSU 3 m Qty.of LED per roll Length per roll Beam angle 1250 25 m 120 Operating temp Storage temp -30 ~75 C -40 ~85 C Installation Example Can be bent easily at any angle with high flexibility. 1. Cut to desired length only on the closest cut mark printed on the product. 2. Expose the adhesive side by removing the cover layer of the double sided tape affixed to the product. 3. Adhere the product to the desired place. 4. Any angle connection. 5. In-line connection. 6. Solder leads to switching power supply. 142

LED PRO Architectural LED Linear Ribbon Flex II (Single Color) FCB-SMD3528-14.5-24V-10X420 LED Linear Ribbon Flex II is an innovative product which incorporates a flexible circuit board and cutting-edge SMD LED technology. The flexible PCB can be bent to a maximum radius of 2cm. LED Linear Ribbon Flex II is available in single LED colors such as Red, Green, Yellow, Blue, and White. In the WLED (white LED version) the LED Linear Ribbon Flex II is brighter than a similarly applied T5 fluorescent lamp. The product comes supplied with a pre-applied super slim doublesided tape which makes installation very convenient. This product could be widely used as decoration in store windows, art gallery, bar, nightclub and cupboard where slim light body is needed. LED Linear Ribbon Flex II is an innovative product which incorporates a flexible circuit board and cutting-edge SMD LED technology. The flexible PCB can be bent to a maximum radius of 2cm. LED Linear Ribbon Flex II is available in single LED colors such as Red, Green, Yellow, Blue, and White. In the WLED (white LED version) the LED Linear Ribbon Flex II is brighter than a similarly applied T5 fluorescent lamp. The product comes supplied with a pre-applied super slim double-sided tape which makes installation very convenient. LED Linear Ribbon Flex II is designed for long linear applications, complex signage and structures, convex, concave and other curved surfaces and objects. Item No. LED color FCB-SMD3528-14.5-24V-10X420 R/G/B/Y/W LED type Qty. of LED per meter Unit size SMD3528 Top LED 71 140x10x2.2mm Cutting length 100mm Input voltage Max. power 24V 6.72 W/M Max.meter(s)per 6A switching PSU 17 m Qty.of LED per roll Length per roll Beam angle 1250 25 m 120 Operating temp -30 ~75 C Storage temp -40 ~85 C Features and Benefits Flexible with a minimum bend radius of 2cm SMD LED technology High Luminosity Can be applied to curved and complex structures Installation Example Can be bent easily at any angle with high flexibility. 1. Cut to desired length only on the closest cut mark printed on the product. 2. Expose the adhesive side by removing the cover layer of the double sided tape affixed to the product. 3. Adhere the product to the desired place. 4. Any angle connection. 5. In-line connection. 6. Solder leads to switching power supply. 143

LED Linear Ribbon Flex II-WP (Single Color/Waterproof) FCB-SMD3528-20-12V-11.5x60-WP LED Linear Ribbon Flex II-WP is an innovative product which incorporates a waterproof silicon flexible circuit board and cutting-edge SMD LED technology. The waterproof flexible silicon PCB can be bent to a maximum radius of 2cm. LED Linear Ribbon Flex II-WP is available in single LED colors such as Red, Green, Yellow, Blue, and White. In the WLED (white LED version) the LED Linear Ribbon Flex II-WP is brighter than a similarly applied T5 fluorescent lamp. LED Linear Ribbon Flex II is designed for long linear applications, complex signage and structures, convex, concave and other curved surfaces and objects. Due to the waterproof nature of the LED Linear Ribbon Flex II-WP it can be applied both indoors and out. Features and Benefits Flexible with a minimum bend radium of 2cm SMD LED technology High Luminosity Can be applied to curved and complex structures Waterproof Item No. LED color LED type Qty. of LED per meter Unit size FCB-SMD3528-20-12V-11.5x60-WP R/G/B/Y/B SMD3528 Top LED 50 60x12x2.2mm Cutting length 60mm Input voltage 24V power 4 W/M Max.meter(s)per 2.5A switching PSU 10 m Qty.of LED per roll Length per roll Beam angle 300 6 m 120 Operating temp Storage temp -30 ~75 C -40 ~85 C Installation Example Can be bent easily at any angle with high flexibility. 1. Cut to desired length only on the closest cut mark printed on the product. 2. Put End Cap on the one side of the fixture and paste it tightly by adhesive tape to form perfect waterproof effect. 3. Fix the fixture with screws and fixing stuffs. 4. In-line connection or any angle connection. 5. Solder leads to switching power supply. 6. Put End Cap on the other side of the fixture and paste it tightly by adhesive tape to form perfect waterproof effect. 144

145 LED Lamp

LED Direct Replacement Lamps LED Recessed Ceiling Light Series LED Lamp Series are designed for replacements to traditional lamps for places such as ceiling, cabinets and so on. The Lamp Series is part of the WLED white light LED family which incorporates High Power White LED. The main components of an LED lamp are: outer casing, reflector, lens, LED aluminum plank, constant current circuit, and lamp base. The outercasing is constructed of a milky PC aluminum alloy that is durable and shatterproof. The connection piece at the lamp head utilizes a type of copper that has low resistance, good conductivity, and a specially oxidized treated surface. Imported PMMA is used for the reflector cup, allowing the best lighting effect to be achieved. The constant current circuit utilizes high quality industrial level components which enhances the energy-efficiency and reliability. Applications: Direct traditional lamp replacements. Note: Due to the rapid advancements of these technologies product details may change without notice. Ask your sales representatives for the latest specifications. Item No. Raling power Operating current Effeicecy Luminous flux Beam angle Color temperature Temperature rising @ Ta=25 C Lifespan Wavelength Why LED Lamps Specification Comparative Example MR 16 LED Lamp 3W 0.25A 50LM/W 130LM 40 5000-8000K (Can be made as request) below 50 C 6000H UV Excluded MR 16 Halogen Lamp (PHILIPS) 20W 1.12A 20-25 LM/W 300LM 24 2700+500K Above 70 C 4000H UV included, as a result of irradiated object with higher degradation. LED Recessed Ceiling Light Series are designed to be ceiling mounted for down lighting applications. The LED Recessed Ceiling Light Series is part of the WLED white light LED family and incorporates High Power (WLED) Cool White LED s. The LED Recessed Ceiling Light Series are also available in new Warm and Ultra Warm White CCT (Color Correlated Temperature) LED types. The fixture housings of the LED Recessed Ceiling Light Series are made of high grade materials such as pure aluminum which is treated with a special anode oxidation process which produces and even grain appearance. Other finishes are available such as Titanium, Nickel Chrome, powder coated, and silver gray. Refer to the products specifications section for more information. Within the LED Recessed Ceiling Light Series there are many distinct and bold designs incorporating the latest in fit, form, function, and fashion. The LED Recessed Ceiling Light Series are powered by AC to DC or high voltage constant current drivers and can be connected to junction boxes for multiple fixture connections. Some fixtures may contain transformers drivers within the fixture. Refer to the product specifications section for more information. The LED Recessed Ceiling Light Series are available in both indoor and outdoor versions and are typically used as a down light from ceilings or within window framing for the illumination of specific points of interest are desired areas on counter tops, tables, office desks, end tables, and many more. 3x1W 6x1W 10x1W 15x1W 40x1W 46x1W LED to Incandescent Equivalents 15W 25W 40W 60W 150W 200W The LED Recessed Ceiling Light Series include IP rated fixtures (see individual product technical specifications for specific IP rating) and are manufactured to CE and UL standards. 146

LED Lamp Dimensional Diagrams Dimensional Diagrams 3x1W Aluminum MR16-12V High Power Down Lamp LB-MR16-PC-12V Features and Benefits Direct Replacement for MR-16 GU5.3 Lamps 3 x 1W High Power LEDs Color Options (WLED White, WW, UWW, Red, Yellow, Green, Blue) 5000 to 8,000K CCT (WLED) Cool White Version 2000 to 5,000K CCT (Optional Warm and Ultra Warm White Versions) Energy Efficient Extreme Long Life (Up to 100,000 Hours) Low Heat No UV Industrial Grade Components for Enhanced Performance and Lifetime. Constructed of ivory colored PC Copper Conductive Pins (Low Resistance) Optimized Heat Dissipation Efficiency Optical Grade Acrylic Lenses 38 Beam Angle Shatterproof and Fireproof 1x3W Aluminum B22-120V High Power Down Lamp LB-B22-PC-3W-120W/240V Features and Benefits Direct Replacement 1 x 3W High Power LED Color Options (WLED White, WW, UWW, Red, Yellow, Green, Blue) 5000 to 8,000K CCT (WLED) Cool White Version 2000 to 5,000K CCT (Optional Warm and Ultra Warm White Versions) Energy Efficient Extreme Long Life (Up to 100,000 Hours) Low Heat No UV Industrial Grade Components for Enhanced Performance and Lifetime. Constructed of Aluminum with Oxidized Surface Treatment Copper Conductive Lamp Base (Low Resistance) Optimized Heat Dissipation Efficiency Optical Grade PMMA Acrylic Lens 12 Beam Angle Shatterproof and Fireproof Beam Angle Output Power Luminous Flux Lamp Base Color (Single) CCT(K) Input Voltage Operating Environment Dimmensions 3 x 1W High Power LEDs 38 3W (Comparable to MR-16 Halogen) 160Lm GU5.3 / G5.3 WLED (White LED), Warm White, Ultra Warm White, Red, Yellow, Blue, Green, and others on request. 2,000 to 10,000K (WLED) Version 12V AC -20-40 C 55 H x 50dia Beam Angle Output Power Luminous Flux Lamp Base Color (Single) CCT(K) Input Voltage Operating Environment Dimmensions 1 x 3W High Power LEDs 12 3W (Comparable to 15W Incandescent) 56.6Lm B22 WLED (White LED), Warm White, Ultra Warm White, Red, Yellow, Blue, Green, and others on request. 2,000 to 10,000K (WLED) Version 120V AC -20-40 C 75 H x 50dia Candle Power Distribution Now available in WLED (White LED) Warm and Ultra Warm White with CCT(K) from 2,000 to 5,000K. (Not shown) Order Code Information LB-MR16-PC-12V-(Color or CCT) Candle Power Distribution Now available in WLED (White LED) Warm and Ultra Warm White with CCT(K) from 2,000 to 5,000K. (Not shown) Order Code Information LB-E26-PC-3W-120V-(Color or CCT) Example LB-MR16-PC-12V-W (WLED White 5000-10,000K) LB-MR16-PC-12V-WW (WLED Warm White 3,000-4,000K) LB-MR16-PC-12V-R (Red LED) Example LB-E26-PC-3W-120V-W (WLED White 5000-10,000K) LB-E26-PC-3W-120V-WW (WLED Warm White 3,000-4,000K) LB-E26-PC-3W-120V-R (Red LED) 147

Dimensional Diagrams Dimensional Diagrams 1x3W Aluminum E26-120V High Power Down Lamp LB-E27-PC-3W-120W/240V Features and Benefits Direct Replacement for 15W Incandescent Lamps 1 x 3W High Power LED Color Options (WLED White, WW, UWW, Red, Yellow, Green, Blue) 5000 to 8,000K CCT (WLED) Cool White Version 2000 to 5,000K CCT (Optional Warm and Ultra Warm White Versions) Energy Efficient Extreme Long Life (Up to 100,000 Hours) Low Heat No UV Industrial Grade Components for Enhanced Performance and Lifetime. Constructed of Aluminum with Oxidized Surface Treatment Copper Conductive Lamp Base (Low Resistance) Optimized Heat Dissipation Efficiency Optical Grade PMMA Acrylic Lens 12 Beam Angle Shatterproof and Fireproof 1x3W Aluminum GU10-120V High Power Down Lamp LB-GU10-PC-3W-120W/240V Features and Benefits Direct Replacement for 15W Incandescent Lamps 1 x 3W High Power LED Color Options (WLED White, WW, UWW, Red, Yellow, Green, Blue) 5000 to 8,000K CCT (WLED) Cool White Version 2000 to 5,000K CCT (Optional Warm and Ultra Warm White Versions) Energy Efficient Extreme Long Life (Up to 100,000 Hours) Low Heat No UV Industrial Grade Components for Enhanced Performance and Lifetime. Constructed of Aluminum with Oxidized Surface Treatment Copper Conductive Lamp Base (Low Resistance) Optimized Heat Dissipation Efficiency Optical Grade PMMA Acrylic Lens 12 Beam Angle Shatterproof and Fireproof Beam Angle Output Power Luminous Flux Lamp Base Color (Single) CCT(K) Input Voltage Operating Environment Dimmensions 1 x 3W High Power LEDs 12 3W (Comparable to 15W Incandescent) 56.6Lm E27 WLED (White LED), Warm White, Ultra Warm White, Red, Yellow, Blue, Green, and others on request. 2,000 to 10,000K (WLED) Version 120V AC -20-40 C 75 H x 50dia Beam Angle Output Power Luminous Flux Lamp Base Color (Single) CCT(K) Input Voltage Operating Environment Dimmensions 1 x 3W High Power LEDs 12 3W (Comparable to 15W Incandescent) 56.6Lm GBU10 / GZ10 WLED (White LED), Warm White, Ultra Warm White, Red, Yellow, Blue, Green, and others on request. 2,000 to 10,000K (WLED) Version 120V AC -20-40 C 67.7 H x 50dia Candle Power Distribution Now available in WLED (White LED) Warm and Ultra Warm White with CCT(K) from 2,000 to 5,000K. (Not shown) Order Code Information LB-E26-PC-3W-120V-(Color or CCT) Example LB-E26-PC-3W-120V-W (WLED White 5000-10,000K) LB-E26-PC-3W-120V-WW (WLED Warm White 3,000-4,000K) LB-E26-PC-3W-120V-R (Red LED) 148 Candle Power Distribution Now available in WLED (White LED) Warm and Ultra Warm White with CCT(K) from 2,000 to 5,000K. (Not shown) Order Code Information LB-GU10-PC-3W-120V-(Color or CCT) Example LB-GU10-PC-3W-120V-W (WLED White 5000-10,000K) LB-GU10-PC-3W-120V-WW (WLED Warm White 3,000-4,000K) LB-GU10-PC-3W-120V-R (Red LED)

LED Lamp Dimensional Diagrams Dimensional Diagrams 1x3W Aluminum MR16-12V High Power Down Lamp LB-MR16-PC-3W-12V Features and Benefits Direct Replacement for MR16 Halogen Lamps 1 x 3W High Power LED Color Options (WLED White, WW, UWW, Red, Yellow, Green, Blue) 5000 to 8,000K CCT (WLED) Cool White Version 2000 to 5,000K CCT (Optional Warm and Ultra Warm White Versions) Energy Efficient Extreme Long Life (Up to 100,000 Hours) Low Heat No UV Industrial Grade Components for Enhanced Performance and Lifetime. Constructed of Aluminum with Oxidized Surface Treatment Copper Conductive Lamp Pins (Low Resistance) Optimized Heat Dissipation Efficiency Optical Grade PMMA Acrylic Lens 12 Beam Angle Shatterproof and Fireproof 1x1W Aluminum B22-240V High Power Down Lamp LB-B22-PC-1W-L-120V/240V Features and Benefits Direct Replacement Lamp 1 x 1W High Power LED Color Options (WLED White, WW, UWW, Red, Yellow, Green, Blue) 5000 to 8,000K CCT (WLED) Cool White Version 2000 to 5,000K CCT (Optional Warm and Ultra Warm White Versions) Energy Efficient Extreme Long Life (Up to 100,000 Hours) Low Heat No UV Industrial Grade Components for Enhanced Performance and Lifetime. Constructed of Aluminum with Oxidized Surface Treatment Copper Conductive Lamp Base (Low Resistance) Optimized Heat Dissipation Efficiency Optical Grade PMMA Acrylic Lens 12 Beam Angle Shatterproof and Fireproof Beam Angle Output Power Luminous Flux Lamp Base Color (Single) CCT(K) Input Voltage Operating Environment Dimmensions 3 x 1W High Power LEDs 12 3W (Comparable to MR16 Halogen) 56.6Lm G5.3 / GU5.3 WLED (White LED), Warm White, Ultra Warm White, Red, Yellow, Blue, Green, and others on request. 2,000 to 10,000K (WLED) Version 12V AC 20-40 C 55 H x 50dia Beam Angle Output Power Luminous Flux Lamp Base Color (Single) CCT(K) Input Voltage Operating Environment Dimmensions 1 x 1W High Power LEDs 12 1W 36Lm B22 WLED (White LED), Warm White, Ultra Warm White, Red, Yellow, Blue, Green, and others on request. 2,000 to 10,000K (WLED) Version 240V AC -20-40 C 22 H x 50dia Candle Power Distribution Now available in WLED (White LED) Warm and Ultra Warm White with CCT(K) from 2,000 to 5,000K. (Not shown) Order Code Information LB-MR16-PC-3W-12V-(Color or CCT) Example Candle Power Distribution Now available in WLED (White LED) Warm and Ultra Warm White with CCT(K) from 2,000 to 5,000K. (Not shown) Order Code Information LB-B22-PC-1W-L-240V-(Color or CCT) Example LB- MR16-PC-3W-12V-W (WLED White 5000-10,000K) LB- MR16-PC-3W-12V-WW (WLED Warm White 3,000-4,000K) LB- MR16-PC-3W-12V-R (Red LED) LB-B22-PC-1W-L-240V -W (WLED White 5000-10,000K) LB-B22-PC-1W-L-240V -WW (WLED Warm White 3,000-4,000K) LB-B22-PC-1W-L-240V -R (Red LED) 149

Ø50.0 76 GU10 Dimensional Diagrams Dimensional Diagrams 1x1W Aluminum E26-120V/E27-240V High Power Down Lamp LB-E26-PC-1W-L-120V / LB-E27-PC-1W-L-240V Features and Benefits Direct Replacement Lamp 1 x 1W High Power LED Color Options (WLED White, WW, UWW, Red, Yellow, Green, Blue) 5000 to 8,000K CCT (WLED) Cool White Version 2000 to 5,000K CCT (Optional Warm and Ultra Warm White Versions) Energy Efficient Extreme Long Life (Up to 100,000 Hours) Low Heat No UV Industrial Grade Components for Enhanced Performance and Lifetime. Constructed of Aluminum with Oxidized Surface Treatment Copper Conductive Lamp Base (Low Resistance) Optimized Heat Dissipation Efficiency Optical Grade PMMA Acrylic Lens 12 Beam Angle Shatterproof and Fireproof 1x1W Aluminum GU10-120V/GU10-240V High Power Down Lamp LB-GU10-PC-1W-L-120V / LB-GU10-PC-1W-L-240V Features and Benefits Direct Replacement Lamp 1 x 1W High Power LED Color Options (WLED White, WW, UWW, Red, Yellow, Green, Blue) 5000 to 8,000K CCT (WLED) Cool White Version 2000 to 5,000K CCT (Optional Warm and Ultra Warm White Versions) Energy Efficient Extreme Long Life (Up to 100,000 Hours) Low Heat No UV Industrial Grade Components for Enhanced Performance and Lifetime. Constructed of Aluminum with Oxidized Surface Treatment Copper Conductive Lamp Pins (Low Resistance) Optimized Heat Dissipation Efficiency Optical Grade PMMA Acrylic Lens 12 Beam Angle Shatterproof and Fireproof Beam Angle Output Power Luminous Flux Lamp Base Color (Single) CCT(K) Input Voltage Operating Environment Dimmensions 1 x 1W High Power LEDs 12 1W 36Lm E26 / E27 WLED (White LED), Warm White, Ultra Warm White, Red, Yellow, Blue, Green, and others on request. 2,000 to 10,000K (WLED) Version 120V AC / 240V AC 20-40 C 75 H x 50dia Beam Angle Output Power Luminous Flux Lamp Base Color (Single) CCT(K) Input Voltage Operating Environment Dimmensions 1 x 1W High Power LEDs 12 1W 36Lm GU10 / GZ10 WLED (White LED), Warm White, Ultra Warm White, Red, Yellow, Blue, Green, and others on request. 2,000 to 10,000K (WLED) Version 120V AC / 240V AC -20-40 C 67.7H x 50dia Candle Power Distribution Now available in WLED (White LED) Warm and Ultra Warm White with CCT(K) from 2,000 to 5,000K. (Not shown) Candle Power Distribution Now available in WLED (White LED) Warm and Ultra Warm White with CCT(K) from 2,000 to 5,000K. (Not shown) Order Code Information B-E26-PC-1W-L-120V(240V)-(Color or CCT) Example B-E26-PC-1W-L-120V(240V)-W (WLED White 5000-10,000K) B-E26-PC-1W-L-120V(240V)-WW (WLED Warm White 3,000-4,000K) B-E26-PC-1W-L-120V(240V)-R (Red LED) 150 Order Code Information LB-GU10-PC-1W-L-120V(240V)-(Color or CCT) Example LB-GU10-PC-1W-L-120V(240V)-W (WLED White 5000-10,000K) LB-GU10-PC-1W-L-120V(240V)-WW (WLED Warm White 3,000-4,000K) LB-GU10-PC-1W-L-120V(240V)-R (Red LED)

LED Lamp Dimensional Diagrams Dimensional Diagrams 1x1W Aluminum MR16-12V High Power Down Lamp LB-MR16-PC-1W-L Features and Benefits Direct Replacement Lamp for MR-16 Halogen Types 1 x 1W High Power LED Color Options (WLED White, WW, UWW, Red, Yellow, Green, Blue) 5000 to 8,000K CCT (WLED) Cool White Version 2000 to 5,000K CCT (Optional Warm and Ultra Warm White Versions) Energy Efficient Extreme Long Life (Up to 100,000 Hours) Low Heat No UV Industrial Grade Components for Enhanced Performance and Lifetime. Constructed of Aluminum with Oxidized Surface Treatment Copper Conductive Lamp Pins (Low Resistance) Optimized Heat Dissipation Efficiency Optical Grade PMMA Acrylic Lens 12 Beam Angle Shatterproof and Fireproof 1x1W Plastic B22-240V High Power Down Lamp LB-B22-PC-120V/240V Features and Benefits Direct Replacement Lamp 1 x 1W High Power LEDs Color Options (WLED White, WW, UWW, Red, Yellow, Green, Blue) 5000 to 8,000K CCT (WLED) Cool White Version 2000 to 5,000K CCT (Optional Warm and Ultra Warm White Versions) Energy Efficient Extreme Long Life (Up to 100,000 Hours) Low Heat No UV Industrial Grade Components for Enhanced Performance and Lifetime. Constructed of ivory colored PC Copper Conductive Lamp Base (Low Resistance) Optimized Heat Dissipation Efficiency Optical Grade Acrylic Lenses 12 Beam Angle Shatterproof and Fireproof Beam Angle Output Power Luminous Flux Lamp Base Color (Single) CCT(K) Input Voltage Operating Environment Dimmensions 1 x 1W High Power LEDs 12 1W 36Lm G5.3 / GU5.3 WLED (White LED), Warm White, Ultra Warm White, Red, Yellow, Blue, Green, and others on request. 2,000 to 10,000K (WLED) Version 12V AC -20-40 C 55H x 50dia Beam Angle Output Power Luminous Flux Lamp Base Color (Single) CCT(K) Input Voltage Operating Environment Dimmensions 1 x 1W High Power LEDs 12 1W 36Lm B22 WLED (White LED), Warm White, Ultra Warm White, Red, Yellow, Blue, Green, and others on request. 2,000 to 10,000K (WLED) Version 12V AC -20-40 C 72.3 H x 50dia Candle Power Distribution Now available in WLED (White LED) Warm and Ultra Warm White with CCT(K) from 2,000 to 5,000K. (Not shown) Order Code Information LB-MR16-PC-1W-L-12V-(Color or CCT) Example Candle Power Distribution Now available in WLED (White LED) Warm and Ultra Warm White with CCT(K) from 2,000 to 5,000K. (Not shown) Order Code Information LB-B22-PC-240V-(Color or CCT) Example LB-MR16-PC-1W-L-12V-W (WLED White 5000-10,000K) LB- MR16-PC-1W-L-12V-WW (WLED Warm White 3,000-4,000K) LB- MR16-PC-1W-L-12V-R (Red LED) LB-B22-PC-240V-W (WLED White 5000-10,000K) LB-B22-PC-240V-WW (WLED Warm White 3,000-4,000K) LB-B22-PC-240V-R (Red LED) 151

Dimensional Diagrams Dimensional Diagrams 1x1W Plastic E26-120V/E27-240V High Power Down Lamp LB-E26-PC-120V / LB-E27-PC-240V Features and Benefits Direct Replacement Lamp 1 x 1W High Power LEDs Color Options (WLED White, WW, UWW, Red, Yellow, Green, Blue) 5000 to 8,000K CCT (WLED) Cool White Version 2000 to 5,000K CCT (Optional Warm and Ultra Warm White Versions) Energy Efficient Extreme Long Life (Up to 100,000 Hours) Low Heat No UV Industrial Grade Components for Enhanced Performance and Lifetime. Constructed of ivory colored PC Copper Conductive Lamp Base (Low Resistance) Optimized Heat Dissipation Efficiency Optical Grade Acrylic Lenses 12 Beam Angle Shatterproof and Fireproof 1x1W Plastic GU10-120V/240V High Power Down Lamp LB-GU10-PC-120V / LB-GU10-PC-240V Features and Benefits Direct Replacement Lamp 1 x 1W High Power LEDs Color Options (WLED White, WW, UWW, Red, Yellow, Green, Blue) 5000 to 8,000K CCT (WLED) Cool White Version 2000 to 5,000K CCT (Optional Warm and Ultra Warm White Versions) Energy Efficient Extreme Long Life (Up to 100,000 Hours) Low Heat No UV Industrial Grade Components for Enhanced Performance and Lifetime. Constructed of ivory colored PC Copper Conductive Lamp Base (Low Resistance) Optimized Heat Dissipation Efficiency Optical Grade Acrylic Lenses 12 Beam Angle Shatterproof and Fireproof Beam Angle Output Power Luminous Flux Lamp Base Color (Single) CCT(K) Input Voltage Operating Environment Dimmensions 1 x 1W High Power LEDs 12 1W 36Lm E26 / E27 WLED (White LED), Warm White, Ultra Warm White, Red, Yellow, Blue, Green, and others on request. 2,000 to 10,000K (WLED) Version 120V AC 240V AC -20-40 C 72.3 H x 50dia Beam Angle Output Power Luminous Flux Lamp Base Color (Single) CCT(K) Input Voltage Operating Environment Dimmensions 1 x 1W High Power LEDs 12 1W 36Lm GU10 / GZ10 WLED (White LED), Warm White, Ultra Warm White, Red, Yellow, Blue, Green, and others on request. 2,000 to 10,000K (WLED) Version 120V AC 240V AC -20-40 C 49 H x 50dia Candle Power Distribution Now available in WLED (White LED) Warm and Ultra Warm White with CCT(K) from 2,000 to 5,000K. (Not shown) Order Code Information LB-E26(E27)-PC-120V(240V)-(Color or CCT) Example LB-E26(E27)-PC-120V(240V)-W (WLED White 5000-10,000K) LB-E26(E27)-PC-120V(240V)-WW (WLED Warm White 3,000-4,000K) LB-E26(E27)-PC-120V(240V)-R (Red LED) 152 Candle Power Distribution Now available in WLED (White LED) Warm and Ultra Warm White with CCT(K) from 2,000 to 5,000K. (Not shown) LB-GU10-PC-120V LB-GU10-PC-240V Order Code Information LB-GU10-PC-120V(240V)-(Color or CCT) Example LB- GU10-PC-120V(240V)-W (WLED White 5000-10,000K) LB- GU10-PC-120V(240V)-WW (WLED Warm White 3,000-4,000K) LB- GU10-PC-120V(240V)-R (Red LED)

LED Lamp 1x1W Plastic MR16-12V High Power Down Lamp LB-MR16-PC-12V Features and Benefits Dimensional Diagrams Direct Replacement Lamp 1 x 1W High Power LEDs Color Options (WLED White, WW, UWW, Red, Yellow, Green, Blue) 5000 to 8,000K CCT (WLED) Cool White Version 2000 to 5,000K CCT (Optional Warm and Ultra Warm White Versions) Energy Efficient Extreme Long Life (Up to 100,000 Hours) Low Heat No UV Industrial Grade Components for Enhanced Performance and Lifetime. Constructed of ivory colored PC Copper Conductive Lamp Pins (Low Resistance) Optimized Heat Dissipation Efficiency Optical Grade Acrylic Lenses 12 Beam Angle Shatterproof and Fireproof Beam Angle Output Power Luminous Flux Lamp Base Color (Single) CCT(K) Input Voltage Operating Environment Dimmensions 1 x 1W High Power LEDs 12 1W 36Lm G5.3 / GU5.3 WLED (White LED), Warm White, Ultra Warm White, Red, Yellow, Blue, Green, and others on request. 2,000 to 10,000K (WLED) Version 12V AC -20-40 C 45 H x 50dia Candle Power Distribution Now available in WLED (White LED) Warm and Ultra Warm White with CCT(K) from 2,000 to 5,000K. (Not shown) Order Code Information LB-MR16-PC-12V-(Color or CCT) Example LB-MR16-PC-12V-W (WLED White 5000-10,000K) LB-MR16-PC-12V-WW (WLED Warm White 3,000-4,000K) LB-MR16-PC-12V-R (Red LED) 153

Dimensional Diagrams Dimensional Diagrams Ø50 B22-240V Color Changing Lamp LB-MC-Ø50-B22-120V/240V Features and Benefits Decorative Color Changing Lamp 14 x Super Bright LEDs 7 Color (Red, Green, Blue, Yellow, Cyan, Pink, White) Auto Rainbow Color Cycle Energy Efficient Extreme Long Life (Up to 100,000 Hours) Low Heat No UV Industrial Grade Components for Enhanced Performance and Lifetime. Milky White PC Bulb Cap Optimized Heat Dissipation Efficiency 180 Beam Angle Virtually Unbreakable Ø50 E26-120V/E27-240V Color Changing Lamp LB-MC-Ø50-E26-120V / LB-MC-Ø50-E27-240V Features and Benefits Decorative Color Changing Lamp 14 x Super Bright LEDs 7 Color (Red, Green, Blue, Yellow, Cyan, Pink, White) Auto Rainbow Color Cycle Energy Efficient Extreme Long Life (Up to 100,000 Hours) Low Heat No UV Industrial Grade Components for Enhanced Performance and Lifetime. Milky White PC Bulb Cap Optimized Heat Dissipation Efficiency 180 Beam Angle Virtually Unbreakable Beam Angle Output Power Luminous Flux Lamp Base Color (Single) Input Voltage Operating Environment Dimmensions 14 x Super Bright LEDs 180 1.8W 10.8Lm G5.3 / GU5.3 7 Color Changing (Red, Green, Blue, Yellow, Cyan, Pink, White) 240V AC -20-40 C 95 H x 50dia Beam Angle Output Power Luminous Flux Lamp Base Color (Single) Input Voltage Operating Environment Dimmensions 14 x Super Bright LEDs 180 1.8W 10.8Lm E26 / E27 7 Color Changing (Red, Green, Blue, Yellow, Cyan, Pink, White) 120V / 240V AC -20-40 C 95 H x 50dia LED Technical Parameters: Chip emitting color: Red: Green: Blue: (mm) 620-640 500-540 455-490 V f(v) 2.1-2.4 3.4-4.5 3.4-4.5 IV(mcd) 120 300 120 20(deg) 120 120 120 IF 20mA 20mA 20mA LED Technical Parameters: Chip emitting color: Red: Green: Blue: (mm) 620-640 500-540 455-490 V f(v) 2.1-2.4 3.4-4.5 3.4-4.5 IV(mcd) 120 300 120 20(deg) 120 120 120 IF 20mA 20mA 20mA 154

LED Lamp LC-Ø75-PC-3W-H LC-Ø75-PC-3W The fixture housings of this series of LED Ceiling Recessed Light Series are specially treated to appear elegant, refined, and timeless. These fixtures are available in a aluminum oxidized, nickel chromed, titanium, or silver grey. The LED Ceiling Recessed Light Series are DC powered low voltage. 36 Ø68 Dimensional Diagrams Candle Power Distribution Note: Standard Configuration above contains cool white LEDs. If you desire Warm White, or Ultra Warm White add (-WW) or (-UWW) to the end of the part number. If you need a specific Kelvin Temperature add the desired WW or UWW then (-desired Kelvin Range). 155

LC-Ø75-PC-3W-H (drived by transformer and constant current driver) 1W High Power WLED LED qty. 3 Luminous flux 135Lm CCT 5500-8000K CRI Ra78 Power output 12V Single LED angle 140 60g Beam of light 30 Rated current 350mA Power consumption 3x1W Packing 48PCS Per Carton Environmental temperature -20 C~50 C Working temperature -25 C~85 C Casing color Chrome (Optional: Titanium Nickel, Silver Gray) LC-Ø75-PC-3W (driven by constant current) 1W High Power WLED LED qty. 3 Luminous flux 135Lm CCT 5500-8000K CRI Ra78 Power output 12V Single LED angle 140 60g Beam of light 30 Rated current 350mA Power consumption 3x1W Packing 48PCS Per Carton Environmental temperature -20 C~50 C Working temperature -25 C~85 C Casing color Chrome (Optional: Titanium Nickel, Silver Gray) Connection Examples Connection Examples Accessories 1 to 1 Constant Current PSU and Junction Box Part# P156-157 1 to 3 Constant Current PSU and Junction Box Part# P156-157 1 to 6 Constant Current PSU and Junction Box Part# P156-157 Accessories 1 to 1 Constant Current PSU and Junction Box Part# P156-157 1 to 3 Constant Current PSU and Junction Box Part# P156-157 1 to 6 Constant Current PSU and Junction Box Part# P156-157 156

LED Lamp LC-Ø60-PC-3W-H LC-Ø60-PC-3W The fixture housings of this series of LED Ceiling Recessed Light Series are specially treated to appear elegant, refined, and timeless. These fixtures are available in an aluminum oxidized, nickel chromed, or silver grey finish. The LED Ceiling Recessed Light Series are DC powered low voltage. 36 Ø52 Dimensional Diagrams Candle Power Distribution Note: Standard Configuration above contains cool white LEDs. If you desire Warm White, or Ultra Warm White add (-WW) or (-UWW) to the end of the part number. If you need a specific Kelvin Temperature add the desired WW or UWW then (-desired Kelvin Range). 157

LC-Ø60-PC-3W-H (drived by transformer and constant current driver) 1W High Power WLED LED qty. 3 Luminous flux 135Lm CCT 5500-8000K CRI Ra78 Power output 12V Single LED angle 140 80g Beam of light 36 Rated current 350mA Power consumption 3x1W Packing 48PCS Per Carton Environmental temperature -20 C~50 C Working temperature -25 C~85 C Casing color Chrome (Optional: Nickel, Silver Gray) LC-Ø60-PC-3W (driven by constant current) 1W High Power WLED LED qty. 3 Luminous flux 135Lm CCT 5500-8000K CRI Ra78 Power output 12V Single LED angle 140 80g Beam of light 36 Rated current 350mA Power consumption 3x1W Packing 48PCS Per Carton Environmental temperature -20 C~50 C Working temperature -25 C~85 C Casing color Chrome (Optional: Nickel, Silver Gray) Connection Examples Connection Examples Accessories 1 to 1 Constant Current PSU and Junction Box Part# P156-157 1 to 3 Constant Current PSU and Junction Box Part# P156-157 1 to 6 Constant Current PSU and Junction Box Part# P156-157 Accessories 1 to 1 Constant Current PSU and Junction Box Part# P156-157 1 to 3 Constant Current PSU and Junction Box Part# P156-157 1 to 6 Constant Current PSU and Junction Box Part# P156-157 158

LED Lamp NEOD3001-H (drived by transformer and constant current driver) NEOD-H Series The fixture housings of this series of LED Ceiling Recessed Light Series are made of pure aluminum and are treated with special anode oxidation process which produces and even grain appearance and high grade stainless steel facial profiles. The treated surface appears elegant, refined, and timeless. Additionally these fixtures are available in a shiny nickel chromed finish. The LED Ceiling Recessed Light Series are DC powered low voltage. NEOD3002-H (drived by transformer and constant current driver) 1W Power WLED LED qty 3 Luminous flux 135Lm CCT 5500-8000K CRI Ra78 Power output 12V Single LED angle 140 200g Beam of light 38 Rated current 350mA Power 3x1W Packing 48PCS Per Carton Environmental temperature -20 C~80 C Working temperature -25 C~85 C Casing color Aluminum Oxidized (Optional: Chrome, Silver) 38 Ø60 Dimensional Diagrams Note: Standard Configuration above contains cool white LEDs. If you desire Warm White, or Ultra Warm White add (-WW) or (-UWW) to the end of the part number. If you need a specific Kelvin Temperature add the desired WW or UWW then (-desired Kelvin Range). 159

NEOD3003-H (drived by transformer and constant current driver) NEOD3004-H (drived by transformer and constant current driver) Connection Examples Candle Power Distribution Accessories 1 to 1 Constant Current PSU and Junction Box Part# P156-157 1 to 3 Constant Current PSU and Junction Box Part# P156-157 1 to 6 Constant Current PSU and Junction Box Part# P156-157 160

LED Lamp NEOD3001 (driven by constant current) NEOD Series The fixture housings of this series of LED Ceiling Recessed Light Series are made of pure aluminum and are treated with special anode oxidation process which produces and even grain appearance and high grade stainless steel facial profiles. The treated surface appears elegant, refined, and timeless. Additionally these fixtures are available in a shiny nickel chromed finish. The LED Ceiling Recessed Light Series are DC powered low voltage. NEOD3002 (driven by constant current) 1W Power WLED LED qty 3 Luminous flux 135Lm CCT 5500-8000K CRI Ra78 Power output 12V Single LED angle 140 200g Beam of light 38 Rated current 350mA Power 3x1W Packing 48PCS Per Carton Environmental temperature -20 C~80 C Working temperature -25 C~85 C Casing color Aluminum Oxidized (Optional: Chrome, Silver) 38 Ø60 Dimensional Diagrams Note: Standard Configuration above contains cool white LEDs. If you desire Warm White, or Ultra Warm White add (-WW) or (-UWW) to the end of the part number. If you need a specific Kelvin Temperature add the desired WW or UWW then (-desired Kelvin Range). 161

NEOD3003 (driven by constant current) NEOD3004 (driven by constant current) Connection Examples Candle Power Distribution Accessories 1 to 1 Constant Current PSU and Junction Box Part# P156-157 1 to 3 Constant Current PSU and Junction Box Part# P156-157 1 to 6 Constant Current PSU and Junction Box Part# P156-157 162

LED Embedded light LED Lamp LU-PC-ADJ-3U With steel shell and PC transparent cover, the LU-PC- ADJ-3U is a ceiling recessed lighting fixture composed of 3 white high power LED. It adopts low voltage, so a safe, low power consumption and long lifespan ceiling illumination solution. By using a single unit to connect the power and the control system, you can control 3 pieces of 3U items easily with driver easily. Angles of the lighting fixture is adjustable to illuminate different environments according to requirements. It is an excellent choice for ceilings at places such as hotel, shopping center, chain restaurant and so on. 1W High Power WLED LED qty 1 Luminous flux 50Lm CCT 5500-8000K CRI Ra78 Power output 12V Beam of light 17 Rated current 350mA Power 1W Ø69.0x29.1 Environmental temperature -20 C~50 C Working temperature -25 C~85 C Casing color white (chrome / silver gray) 17 Ø64 Connection Examples Contant power supply drives six lamps Dimensional Diagrams AMP 0.1M 18W constant 1.8M power supply AMP male connector 350mA DC3-54V 1.8M("+"red wire,"-"black wire) 1.8M 1.8M 1.8M 1.8M 1.8M Lamp European standard plugs or similar one Candle Power Distribution Note: Standard Configuration above contains cool white LEDs. If you desire Warm White, or Ultra Warm White add (-WW) or (-UWW) to the end of the part number. If you need a specific Kelvin Temperature add the desired WW or UWW then (-desired Kelvin Range). 163

LED Embedded light LU-PC-ADJ-1U With steel shell and PC transparent cover, the LU-PC- ADJ-1U is a ceiling recessed lighting fixture composed white high power LED. of 1 It adopts low voltage, so a safe, low power consumption and long lifespan ceiling illumination solution. By using a single unit to connect the power and the control system, you can control 3 pieces of 1U items easily with driver easily. Angles of the lighting fixture is adjustable to illuminate different environments according to requirements. It is an excellent choice for ceilings at places such as hotel, shopping center, chain restaurant and so on. 1W High Power WLED LED qty 3 Luminous flux 135Lm CCT 5500-8000K CRI Ra78 Power output 12V Beam of light 19.5 Rated current 350mA Power 1W Ø69.0x29.1 Environmental temperature -20 C~50 C Working temperature -25 C~85 C Casing color white (chrome / silver gray) 19.5 Ø64 Connection Examples Contant power supply drives six lamps Dimensional Diagrams AMP 0.1M 18W constant 1.8M power supply AMP male connector 350mA DC3-54V 1.8M("+"red wire,"-"black wire) 1.8M 1.8M 1.8M 1.8M 1.8M Lamp European standard plugs or similar one Candle Power Distribution Note: Standard Configuration above contains cool white LEDs. If you desire Warm White, or Ultra Warm White add (-WW) or (-UWW) to the end of the part number. If you need a specific Kelvin Temperature add the desired WW or UWW then (-desired Kelvin Range). 164

LED Lamp LED Embedded light LU-PC-30-1W LED qty. Color Beam angle Input voltage Output voltage Rated current Power consumption Casing material Dimmensions Operating temperat 1W High power LED 1pcs Red, Yellow, Green, Blue and White 53 240V AC Red,Yellow 2.4V DC /Green, Blue, White 3.5V DC 350mA 1W PC W30.0 x H13.0mm -20 C~ 40 C 53 Ø25 Dimensional Diagrams Connection Examples Contant power supply drives six lamps 165

LED Embedded light LU-PC--1W LED qty. Color Beam angle Input voltage Output voltage Power Casing material Dimmensions Operating temperature 1W High Power LED 1pc Red, Green, Blue and White 30 240V AC Red,Yellow 2.4V DC /Green, Blue, White 3.5V 1W PC /Aluminum alloy Ø28.3 x Ø22 x Ø20.7mm -20 C ~ +40 C 30 Ø30 Technical (for LU-PC-30, LU-PC-12V, LU-PC-1W): Color Red Yellow Blue Green White Waave length Typical Max 620 629 587 598 465 470 515 535 3000-9000 K Forward direction voltage (V) Typical 2 2 3.4 3.4 3.4 Max 2.6 2.6 4.5 4.5 4.5 Typical Lumen (lm) 25 25 25 25 25 Beam angle ( ) 25-30 25-30 25-30 25-30 25-30 Max reversed current (UA) 20 20 20 20 20 LED Power (W) 1 1 1 1 1 Dimensional Diagrams Connection Examples Contant power supply drives six lamps AMP 0.1M 18W constant 1.8M power supply AMP male connector 350mA DC3-54V 1.8M("+"red wire,"-"black wire) 1.8M 1.8M 1.8M 1.8M 1.8M Lamp European standard plugs or similar one 166

Constant powe supply LC-Ø75-PC-3W-1*1 (CE) I. Transformer with constant current driver drives one lamp. LED Lamp LC-Ø75-PC-3W-3*1 (CE) II. Transformer with constant current driver drives one lamp. LC-Ø75-PC-3W-6*1 (CE) III. Transformer with constant current driver drives one lamp. LC-Ø75-PC-3W-3*1 (UL) IIII. Transformer with constant current driver drives one lamp. 167

LC-Ø75-PC-3W-H-1*1 I. Transformer with constant current driver drives one lamp. LC-Ø75-PC-3W-H-3*1 II. Transformer with constant current driver drives one lamp. LC-Ø75-PC-3W-H-6*1 III. Transformer with constant current driver drives one lamp. 168