Remote Control Unit

Contents Declaration of Conformity --------------------------------------------------------------------------------- 3 General Information ----------------------------------------------------------------------------------------- 4 Safety and Precaution ------------------------------------------------------------------------------4 Remote Control Unit --------------------------------------------------------------------------------------- 5 System Connection ---------------------------------------------------------------------------------------- 6 Front Panel ------------------------------------------------------------------------------------------- 6 Rear Panel ------------------------------------------------------------------------------------------- 7 Connecting your System -------------------------------------------------------------------------- 8 Menu Structure ---------------------------------------------------------------------------------------------- 9 Menu Guide --------------------------------------------------------------------------------------------------- 10 Installation -------------------------------------------------------------------------------------------10 Channel Guide -------------------------------------------------------------------------------------- 16 Channel Manager ---------------------------------------------------------------------------------- 18 System Setting -------------------------------------------------------------------------------------- 19 Games & Utility -------------------------------------------------------------------------------------- 23 CA ---------------------------------------------------------------------------------------------- 23 USB File List ----------------------------------------------------------------------------------------24 Functions Guide -------------------------------------------------------------------------------------------- 25 List Menu --------------------------------------------------------------------------------------------- 25 Info Bar ---------------------------------------------------------------------------------------------- 25 Signal -------------------------------------------------------------------------------------------------26 Zoom -------------------------------------------------------------------------------------------------- 26 Quick Edit -------------------------------------------------------------------------------------------- 26 Audio Language ------------------------------------------------------------------------------------26 Technical Specification ----------------------------------------------------------------------------------- 27 2 Trouble Shooting Guide ---------------------------------------------------------------------------------- 29

General Information Safety and Precautions Thank you for purchasing the digital satellite receiver. For your safety and proper operation, please take time reading this manual fully before installing and operating the receiver. We hope you will be able to take advantage of the numerous functions with the help of this manual. MAINS SUPPLY Use only 100-250VAC 50/60Hz. OVERLOADING Do not overload a wall outlet, extension cord or adapter as this may result in fire or electric shock. LIQUIDS Do not expose to drippings or splashes and be sure that no objects filled with liquids, such as vases be placed on the apparatus. CLEANING 1. Always disconnect the STB power cord from the outlet before cleaning. 2. Use a light damp cloth (no solvents) to dust off the STB. VENTILATION 1. The slots on top of the STB must be left uncovered to allow proper airflow to the unit. 2. Do not stand the STB on soft furnishings or carpets. 3. Do not expose the STB to direct sunlight or do not place it near a heater. 4. Do not stack electronic equipments on top of the STB. 5. Do not use this appliance in airtight area. 6. Do not open the top cover. CABLE Use standard certified cables to prevent any malfunction of the STB. 3

General Information Safety and Precautions ATTACHMENTS Do not use any attachments that are not recommended as these may cause hazard or damage to the STB. CONNECTION TO THE SATELLITE DISH LNB Disconnect the STB from the mains before connecting or disconnecting the cables from the satellite dish. Failure to do so can damage the LNB. CONNECTION TO THE TV Disconnect the STB from the mains before connecting or disconnecting the cables from the TV. Failure to do so can damage the TV. EARTHING The LNB cable MUST BE EARTHED to the system earth for the satellite dish. The earthing system must comply with SABS 061. LOCATION Place the STB indoor in order not to expose to lightening, rain or sunlight. SERVICING 1. Do not attempt to service this product yourself. 2. Refer all servicing to qualified service representatives NOTICE : The power remains on even when the switch is turned off. 4

Remote Control Unit STANDBY (Power) Power On/Off, Standby NUMERIC KEYS : Select channels by channel numbers or enter programming parameters. TV / RADIO Receiver switches between TV and Radio mode. USB Direct button to Connect USB port with PC TV/SAT Receiver switches between TV and Satellite receive mode. M (MUTE) Enable or disable audio Back (PREVIOUS) Return to the previous menu, status or channel VOL (VOLUME) Increase or decrease the volume. PG UP/DOWN Move up/down the cursor EPG Display the TV/Radio Electric Program Guide VOL (VOLUME) Increase or decrease the volume. And move left or right highlight marked cursor. INFO (INFORMATION) Display channel status or various program information of current service. LIST/OK Select menu option, or to updated on entry and to enter List menu CH UP/DOWN Tune to the next or previous channel. And move up or down highlight marked cursor. MENU Display the Main Menu EXITCancel the user selection AUDIO (Red Key) Select audio mode (left, right, stereo, language) SLEEP (Blue Key) Operate sleep mode SUBT (Green Key) Display subtitle contents TEXT (Yellow Key) Show Teletext REW Rewind a programme. FWD Fast forwards a programme. PLAY Play a programme. STOP Stop a programme. R.SKIP Skip a programme backward (Default interval : 10 seconds) F.SKIP Skip a programme backward (Default interval : 10 seconds) REC Record a programme PAUSE Pause a programme CAPTURE Capture current image REPEAT Repeat a section Book.M Bookmark key 5 Book.J Bookmark jump key FAV (Favorite) Set receiver to favorite service mode, display the favorite channel. Sat list View a satellite list SLEEP Operate Sleep mode.

System Connection Front Panel Normal Display : - On - STANDBY - Channel Number - Channel Name Tact switch : Standby On/Off, CH UP/DOWN, Menu, OK, Vol. UP/DOWN Smart Interface slot : 1 Smart card slot USB Port : 1 adapted the USB component port NOTICE : 2. Current time is based on the TDT(Time and Date Table) in the stream of the current service. If the TDT information is not correct, current time might be incorrect. 3. Please do not insert metal or alien substance into the slot for the modules and Smartcards. In doing so can cause damage to the STB and reduce its life span. 6

REAR PANEL Rear Panel ① ② ③④ ⑤ ⑥ ⑦⑧ ⑨⑩ ⑪ Please refer to the diagram above for all possible connections of your receiver Do not connect the unit to the mains socket until all other connections have been made and checked. ① ANT IN : Use to connect an Terrestrial antenna ② RF LOOP OUT : Use to connect a RF signal from this receiver to RF(Ant) input jack on TV ③ IF OUT : This enables the connection of an Analogue receiver. ④ IF INPUT : This port is to connect the coaxial cable from LNB of your Dish. ⑤ TV SCART : This is used to connect your TV through Scart cable ⑥ VCR SCART : This Scart connector is used to connect any external video. ⑦ S/PDIF : This is used to connect with Digital audio amplifier (Optional) ⑧ VIDEO : This RCA connector is used to connect your TV through RCA cable. AUDIO R/L : These RCA connectors are used to connect your TV through RCA cable or any external audio amp or system ⑨ ANT IN : To connect the terrestrial antenna ⑩ TV OUT : To connect the RF signal to a RF(ANT) input e.g. VCR, TV ⑪ RS 232C SERIAL PORT : This is used to connect your receiver with a computer or other STB through a serial cable. 7

System Connection Connecting Your System TV Only There are two ways to connect the STB to your existing TV system. We recommend using one of the following cases for the best result : Connect one end of RCA cable (Composite Video, Audio Left, Right) to the RCA jack on the back of the STB and the other end to a RCA Jack on your TV. Or connect one end of a SCART jack on the back of the STB and the other end to a SCART input of your TV. Finally connect the coaxial cable from the LNB to the LNB IN jack on the STB. With External Audio / Hi-Fi System To connect any external Audio Hi-Fi system, the receiver has been provided with two RCA connectors at the back of the receiver marked with Audio L and R. Connect an RCA stereo cable from the AUDIO L, R jacks on the back of the STB to the LINE, AUX, SPARE OR EXTRA input jacks on your Hi-Fi System or for better quality connect the S/PDIF output to the S/PDIF input of the Hi-Fi system 8

Menu Structure M ain M enu Channel Manager Install Favorite Group Channel Sort Channel Edit Search Channel (SAT) DB. Receive Search Channel (TP) Comm. Protocol Setup Motorized System Factory Satellite Restore DB. Reset Set-Top Box Upgrade OSD Menu Audio Language Audio 2 nd TTXT Language TTXT 2 nd DVB-SUBT DVB-SUBT 2 nd EPG Language EPG 2nd Language Time Format Time Setting Time Offset Time Mode Summer Time System Time AV Output Setting System Date Color Adjust Video Display Parental Control TV Output Additional Option Schedule Manager Telephone Book Tetris Sokoban Othello Vacteria Common Interface Smart Card JPEG File View MP3 File Play Text File View S/W UpGrade 9 Send Data Language Settings OSD Setting USB File List Loader Receive Guide Display Timer Event Setting Embedded CAS Factory Default Application Receive Setup Transponder Games & Utility Delete SAT/TP Default Configuration Channel Manual Add Setup Satellite System Setting Delete Image Delete Channel USB Manager Scart Output TV Type SPDIF UHF Channel UHF Audio Freq. Channel View Power On Main Menu Channel Manager Menu Install Menu Changing PIN Code OSD Transparency CH. Banner Time CH. Change Mode Menu Mode Menu Image Radio CH. Image Multi Picture Multi Picture Time USB Box Time MP3 Player Mode Volume Control DVB-SUBT View OSD Sound Front Lock Front Display Mode Front Dimmer

Menu Guide Installation Initial Service Searching Menu Language Select Language With, Key On The RCU, Then Press Ok Or Menu Key To Continue. Factory Sat/Terr Restore After booting, select an area with, key on the RCU. this moment, PIG on the right side of the screen shows the receive-able range. After selecting the area, move to a certain Satellite with, button on the RCU, there will be range and signal strength in the PIG. If the users wants to find satellites easily, press the Yellow or Green button to sort by name and longitude. Then, Press OK key on the RCU to edit satellite connection and it will move to setting mode. And then, If it is wanted the searching terrestrial channel, select an area with, key on the RCU. After selecting the area, move to a certain. Starting the channel search. Selected Satellite Edit 1) Motorized System Select motor system. (OFF, v1.2 or USALS system) 2) LNB Type Depending on the type of LNB cling to your antenna, you can supply either LNB by setting single or universal. 3) Local Freq. Users can input local frequency directly with numeric keys on the RCU. (0.9, one cable1/2, 5150, 9750, 10600, 10750mhz). to move the cursor, press cursor, keys on the RCU. 4) DiSEqC To the supported the DiSEqC 1.0/1.1. you can selected the dish to the connection. * Finally press Red key to save settings. 10

Menu Guide Installation Service Searching Setup Satellite When Selecting Setup Satellite In Install Menu. 1) Degree Users can edit satellite degree by using numeric keys on the RCU. 2) LNB Frequency (High / Low) Input the frequency directly from the numeric keys on the RCU or press OK on the RCU to scroll frequencies and to select. 3) LNB Power Select LNB voltage.(on/13v/18v/off) 4) DiSEqC Ver. DiSEqC must be used when using two or more antennas and LNBs. Select DiSEqC 1.0 or DiSEqC 1.1. 5) DiSEqC - Committed Set The Port Number Of DiSEqC 1.0 Switch ( P-1 To P-4), Auto, Off - Uncommitted Set The Port Number Of DiSEqC 1.1 Switch. (P-1 To P-16 ), Off 6) 22KHz In case you are using a dual LNB or two antennas connected to a 22KHz tone switch box, make 22KHz tone switch enable or disable to select LNB or antenna. 7) 0/12V Setup Terrestrial When Selecting Setup Terrestrial In Install Menu. 1) Antenna Power : You can selected the Antenna power, move the power to the left or right by pressing the, keys selection. If you use active antenna(5vdc IN), STB will supply 5V dc(35 ma max) 2) LCN (Logical Channel Network) search : Selected the on or off. 11

Menu Guide Installation Service Searching Setup Motorized System When Selecting Setup Motorized System In Install Menu. 1) Motorized System 1.2(motor) : You can move the motor to the left or right by pressing the, keys selection. at v1.2, USALS, off mode. 2) Save Position : When you press the OK key on the RCU. 3) Degree : Press OK key on the RCU first, then, press numeric number keys on the RCU to edit degree directly. 4) Move :Select TP and use the cursor with RCU keys to Move menu to move the motor. Refer to the signal strength (as visual graphic chart), at this time. The motor will move by step by pressing left/right cursor keys shortly on the RCU. The motor will move continuously if users press cursor keys steadily on the RCU. The movement of a motor will be shown on the upper screen. Setup Transponder When Selecting Setup Transponder In Install Menu. 1) Delete : Press Green key on the selected TP to delete the TP. 2) Sort : Press Yellow button to sort TP by TP name or Frequency 3) Edit TP : Press OK key on the TP to edit. 4) TP data change : - When the cursor is on the TP name, press OK button to change the TP name. - TP Edit Place the cursor on the sub menu by using the keys and press the keys or NUMERIC key to change the setting. Insert the frequency of the transponder you want to edit. Input the symbol rate of the transponder you want to edit. Select the polarization of the transponder you want to edit ( Horizontal / Vertical ). Select the FEC (Forward Error Correction) of the transponder you want to edit. - If you cannot find the desired transponder from the transponder list, you can add it by inputting appropriate parameter values for a new transponder and press the Red key to add new transponder. 12

Menu Guide Installation Setup Transponder 5) CH Search : To search TP on the setup transponder mode, select TP first and then press Blue key to blind search channels or press OK to search. Search Channel When selecting Search Channel (Sat/Terr) in Install menu. 1) Service searching : TV/RADIO, CAS, NETWORK SEARCH can be selected when OK key is pressed in satellite. LCN search can be selected when OK key is pressed in Terrestrial. To search multiple channels between satellites, press Red key to select satellites. Press up/down key to move cursor on the option then press OK button to begin searching. 2) SAT-Setup : If satellite setup was wrong, users can run setup edit by pressing press Yellow key. Please refer page 12 for editing. 3) Blind Search : To blind scan, refer below information and start searching. Blue key Polarization : Select All, Ver(13V), Hor(18V) TP/Channel : Select All TV, RADIO or TP only CAS : Select All (FTA+CAS), FTA or CAS only. 4) SCAN : Users can go to scan mode when OK key is pressed on the selected SATELLITE. Then select few options to start scan by; - TV / Radio channels - CAS or FTA channels - Network search Press Start on the menu or press OK from RCU to start search. 13

Menu Guide Install Search Channel (Sat/Terr) STB will automatically search all TV/Radio channels from a satellite and save them into the Channel List. You can see the progressive status of channel searching. Press the Red or Exit key to stop during the Channel Search. When the Channel Search is completed, the result will be saved and the first channel of the searched ones will be displayed. Notice : Please wait for the receiver to process all the channels, and note that the Channel Search procedure may take a few minutes. Service Searching Search Channel (Transponder) When selecting Search Channel (Transponder) in Install menu. (in Satellite) 1) TP searching : First select the Satellite then choose the TP(s) by using the RED key or press the OK, another OK will start searching the selected TP(s) 2) TP Setup : To edit the parameters of the TP, press the Yellow key on the RCU. - Frequency - Symbol rate - Polarization - FEC When selecting Search Channel (Transponder) in Install menu. (in Terrestrial) 1) Channel Search : First select the Terrestrial then choose the channel by using the RED key and press the OK, another OK will start searching the selected channel. 2) Channel Setup : To edit the parameters of the channel, press the Yellow key on the RCU. - Frequency / Bandwidth / setting(tx. Mode/Constellation/Guard Interval/Code rate) 14

Menu Guide Installation Factory Sat/Terr Restore Restores preinstalled Satellite List from the memory. After booting, select an area with, key on the RCU. this moment, PIG on the right side of the screen shows the receive-able range. After selecting the area, move to a certain Satellite with, button on the RCU, there will be range and signal strength in the PIG. If the users wants to find satellites easily, press the Yellow or Green button to sort by name and longitude. Then, Press OK key on the RCU to edit satellite connection and it will move to setting mode. DB. Reset Deletes User boot images, Channel, SAT/TPs go resets to Default configuration. Also to FACTORY DEFAULT. Set-Top Box Upgrade PRESS OK on; 1) Application Receive : Only to receive application S/W from another STB or from PC. 2) Loader Receive : Only to receive Loader S/W from another STB or from PC. DB Receive : To receive certain DB(DB All, CH All) from another STB or from PC Send Data : To send; - All Data Base - All channel - Application S/W - Loader From; Current STB to another STB or to a PC to store. * PIN CODE 0000 at the initial. 15

Menu Guide Channel Guide Program Guide EPG The information is only available from the transponder of the channel you are watching. To see the titles of current & next program, press the EPG of the RCU. Depending on the amount of the EPG data, loading time might take a couple of seconds. Ext. Event When selected channel information is displayed To see the extended information of program, Press RED key. The extended information may include : detailed information such as the actors, the providers. etc. Reservation Functions 1. Maximum 10 events can be reserved. 2. To reserved the channels you want, 1) Select the reservation broadcast using, or, keys. 2) Reservation : Press Blue key 3) Mode : Select the mode Once / Daily / Weekly. 4) Time : Set the Start time using numeric keys. 5) Duration : Set the duration time using numeric keys 3. Save : Press the RED(Update), Green(Add) to cancel the reserved channels, select Exit. 16

Menu Guide Channel Guide Sort Channel Easy to find a certain channel in channel list. When the OK Channel List is displayed, Press the FIND key continuously screen to sort by ALL, Alphabet, TP, CAS or Normal Channel number Multi Picture Display shows 3 previous channels from the viewing channel and 2 channels forward from viewing channel. The current viewing channel is displayed on the center of the screen. Press Multi Picture from the remote control. Favorite Group Favorite group is selected in Channel manager menu. There are theme category for grouping. Favorite group register Select a Favorite group and move the cursor to a channel with the, key and press the RED key to select channel(s). Then GREEN key to ADD the channel(s) in a favorite group. Select the theme group and press OK to register. Also Deleting and Renaming the Favorite Group is possible in this menu. 17

Menu Guide Channel Manager Channel Sort Sort by channel name, Sat/TP and in CAS order at the satellite or LCNs Sort at the Terrestrial. Channel Edit To Lock, Rename, Delete or Move channel(s). Channel Add (Manual PID) When the PID (broadcast data) of a certain channel is changed, PID value can be adjusted in Channel Manual Add menu. 1. Select a satellite where the channel PID is to be changed. 2. Select the transponder of the channel. 3. Select the channel with the cursor by pressing the RED key. 4. On the channel, press OK key. 5. Input value with the numeric key. 6. To add a new channel select Add and input the value, to modify an existing channel PID value select Update. These selection can be done by hot key. ( Red and Green Key) The new added channel name can be modified by pressing OK on the current channel name. To display in either hex value or decimal value press the Yellow key. To check and view the modified channel press VIEW to display PIG screen on the right side of the screen. The PID can be viewed in DECIMEL or HEX value by pressing the Yellow key. 18

Menu Guide System Setting Language Setting To select the desired language of the OSD Menu, Audio, 2 nd Audio, EPG Language, EPG 2 nd, TTXT.Language, TTXT.2 nd, DVB-SUBT., DVB-SUBT.2 nd place the cursor on the sub menu by pressing the, keys and press the, keys to change language. The Language of the OSD Menu, Audio, and 2 nd will be changed to the selected language. Time Setting 1. Time Format Displays in 24HR mode or in AM/PM mode. 2. Guide Display Control information display time on live channel in EPG screen. (time : 3Hour, 1 ~ 7 Days) 3. Time Mode To set time automatically from TDT information if set to Auto. 4. Time Offset Date is displayed by GMT time standard. (Changeable only in Auto Time mode.) 5. Summer Time 6. System Time / Date When Time Mode is in Manual the time and date information is set by numeric and, keys on the RCU. Timer Event Setting 1. Wakeup Wakeup time can be selected. 2. Standby After certain amount of time, STB can be automatically turned off. 3. Timer User can setup reservation for a Start / End time of a specific up to Max. 10 Timer. Press RED key to save the settings and GREEN key to Add the settings. 19

Menu Guide System Setting AV Output Setting 1. Scart Output Video output can be selected RGB, CVBS, Component. 2. Video Display 1) When Aspect Ratio 4:3 - PAN SCAN : Center part of 16:9 image shown on full screen when 16:9 transmission - LETTERBOX : Whole 16:9 image is shown on screen with horizontal black bars on top and bottom. 3. TV type Select the format of the video to be displayed on screen. You can choose either 4:3 ratio (Standard) or 16:9 (Wide) according to the TV type. 4. TV Output TV output can be selected as Auto/PAL/NTSC/SECAM 5. SPDIF (Sony Philips Digital InterFace) Digital audio out put can be selected On/OFF 6. UHF Channel Select RF modulator output channel number from 21 to 69. 7. UHF Audio Freq. Select from PAL-B/G, PAL-I, PAL-D/K, PAL-M Color Adjust Except default adjustment, users can adjust below ration for changing. (Default/Sports/Movie/Cartoon/User) User defined adjustment can be changed as range.( -32 ~ +31) Parental Control You can change your PIN Code from the factory default value 0000 as follows: 1. Channel View Off, Continuous, Once. 2. Power On To lock the receiver, select Power On in the Parental Control menu and change it to the On mode by using the, keys. If the receiver is locked, whenever you try to start the STB, the PIN Code screen will appear and you will be asked to enter your PIN Code. 20

Menu Guide System Setting Parental Control 3. Main Menu To lock the receiver, select Main Menu in the Parental Control menu and change it to the On mode by using the, keys. If the receiver main menu is locked, whenever you try to Menu key the RCU, the PIN Code screen will appear and you will be asked to enter your PIN Code. 4. CH. Manager Menu To lock the Channel Manager, select Channel Manager Menu in the Parental Control menu and change it to the On mode by using the, keys. 5. Install Menu To lock the Install, select Install Menu in the Parental Control menu and change it to the On mode by using the, keys. 6. Changing PIN Code You can change your PIN Code from the factory default value 0000 as follows: Select Change PIN Code in the Parental Control menu. You will then be asked for a new PIN Code when the changing PIN Code pressed. Once you enter a new PIN Code, the system will ask you to re-enter for confirmation. When you have entered a new PIN Code twice, the PIN Code has been changed. If you forget the PIN Code, contact the distributor to recover it. 8. Parental rating 내용없음 OSD Setting 1. OSD Transparency : default 8. setting the 1 ~ 10 step. 2. CH. Banner time : default 5 second. Setting off, 3 ~ 10 second. 3. CH. Change mode : default freeze. Selected the black or freeze. 4. Menu Mode : default picture mode. Selected the picture, live and PIP. 5. Menu Image : default internal on picture mode. Selected the Internal, user or off mode. 6. Radio CH. Image : default internal. Selected the internal, user or off mode. 7. Multi Picture : default 6 pictures. Selected the 4, 6, 9, 13 or 16 pictures. 8. Multi Picture Time : default 5 second. Selected the 5 ~ 10 second. 9. USB Box Time : default 5 second. Selected the off, 1~9 sec or continuous. 10. MP3 Player Mode : default picture mode. Selected the picture or live mode. 21

Menu Guide System Setting Additional Options 1. Volume Control ALL: Volume level applied for ALL channels. Singly: Will save the volume level status for each indiviual channel. 2. DVB-SUBT View Select DVB-Subtitle 3. OSD Sound 4. Front Lock To lock the receiver, select Front Lock in the Additional Option menu and change it to the On mode by using the, keys. If the Front key is locked, don t control at the front key. 5. Front Display Mode Selecting CH. Name or CH. No. the front 7 segment will display be either Channel or Channel number. 6. Front Dimmer Front Display of the box s bright can be adjusted from step 1 to step 5 7. LCNs Mode - LCNs Sort : On, Off mode selected - LCNs Undefined No. : 100 ~ 900 numbering. Games & Utility Schedule Manager Telephone book Users can manage telephone numbers Games Tetris, Sokoban, Othello and Vacteria CA Smart Card STB is an embedded smart card receiver, please insert a valid smart Card to view channels. For proper operation always insert the smart card IC face down. Common Interface 22

Menu Guide USB File List JPEG File View View a JPEG image from a USB memory. Also change the default MENU background image as to a user desired JPEG image. * To go back the original background image, do a DB. Reset from the INSTALL menu. MP3 File Play Play a MP3 music file from the USB memory. Text File Play To display a TEXT file on the TV from the USB memory. S/W Upgrade To Upgrade the S/W from the USB memory. (The latest S/W should be prepared in the USB memory in advance) USB Manager Drive Change, Drive Format and Drive Speed mode selected. 23

Functions Guide List Menu This menu helps you to easily select the channel that you want to watch or edit. To display the Channel List, press the CH List or OK key while you are viewing a program and you will see all channels that you saved in the channel list. To watch a specific channel, first select by using the, keys, and press the OK key to confirm. (For page scroll, press left/right key or the scroll keys on the RCU) You can also select a specific channel by pressing the numeric keys directly. The symbol of Lock & Scrambled feature displayed on the Right side of the list stands for locked channel or scrambled channels. - When you press the TV/Radio key, you will toggle from TV to Radio Channel List. - When you press the FAV key, you can see each favorite channel list. - The channel list can be constructed independently for each Satellite, Favorite Group, TV or Radio, by pressing the TV/ RADIO, SAT LIST, CH LIST and FAV keys. At these menus press FIND key repeatedly of the RCU to easily find channels in Alphabetical, TP, CAS or Normal channel number order. Info bar (i-plate) Press once I (Information Key) on the RCU. To display i-plate for quality (Green). Also the satellite name, channel number and name/tdt/ program type (FTA/ CI ), Channel Lock, Teletext, Subtitle, AC3 audio and now EPG is displayed. Pressing one more I Key in the I-plate, display the current channel information (frequency, PID information and now EPG detail information). : Scrambled channel : Sound AC3 display : Teletext information : Subtitle information : Lock channel display : Favorite Channel Pressing the I (Information Key) in the Channels List will display the Satellite, Frequency, Symbol Rate and other additional information. 24

Functions Guide SIGNAL To display the current Strength and quality of the signal including the current Satellite information. ZOOM Press zoom key on the RCU to close up the screen as x1/ x2/ x3/ x4 rates. On the zoomed screen it can move by,, key. To quit zoom, press exit key. Quick Edit When the user wants to register or change the current favorite group while viewing or to lock or delete a channel press the FIND in the no menu state of the RCU for quick edit. Audio Language Users can select audio language press the AUDIO key of the RCU. 25

Specification Technical Specification Conditional Access Interface Smart Front End 1 Slot Smart card interface Satellite Terrestrial Input Frequency 950~2150MHz 51 ~ 860MHz Input Impedance 75 Ω 75 Ω Connector 2xF-Type 1X IEC(Male,Female) RF Input Level -65~-25dBm 20 dbm to -75 dbm LNB Control DiSEqC 1.0, 1.1 & 1.2, USALS LNB Power 13V/18V (Max500mA with short circuit protection) LNB Tone Switch 22KHz Wave Form QPSK OFDM (SCPC, MCPC capable) Symbol Rate 2~45 MS/S A/V Mode Video MPEG-II Main Profile/Main Level Audio MPEG-I Layer I&II Aspect Ratio 4:3, 16:9 Audio Sampling Rate 32, 44.1, 48KHz Audio Type Mono, Dual Mono, Stereo, Joint Stereo Graphic Display 720x576(PAL), 720x480(NTSC) 26

Specification Technical Specification Connectors Tuner Satellite IEC 169-24,Female With 1 Loop Through Out Terrestrial IEC 169-2 Female/Male(Loop through out) Video Output 1 x RCA/Cinch 1 x SCART Audio Output 2 x RCA/Cinch 1 x SCART S-Video Output (Optional) 1 x Mini DIN S/PDIF (Optional) 1 x optic con. (Dolby Bitstream Out Available) Modulator Output PAL Modulator (UHF CH.21 ~ 69) RS232C 9 Pin D-Sub RS232C serial port General Characteristics Power Type Supply Voltage SMPS 100-250VAC, 50/60Hz Power Consumption Max. 25W Display 4 Digit, 7-Segment Weight Approx. 1.65Kg Dimensions 300(W) x 220 (D) x 60 (H) mm Channel Storage Max. 5000CH Operating Temperature Storage Temperature 0 ~ 45 C -10 C ~ 70 C Please Note : The specification of the STB may be changed without notice in advance. 27

Trouble Shooting Guide Trouble Shooting If you suspect there is a fault with your receiver, please check the following trouble shooting guide before calling an authorized service agent. Warning! Under no circumstances attempt to repair the receiver yourself. Tampering with the receiver may result in fatal electric shock and will invalidate your warranty. Symptom Possible cause No display on the Display Panel The power cord is not plugged in correctly. No picture on the screen Receiver is in Standby mode. SCART Jack is not connected firmly to the video output port of television. Incorrect channel or video output is selected on television. Brightness level of your TV set is incorrectly defined. No sound The SCART cables are connected incorrectly. The Volume level is low. Muting function is active. 28

Trouble Shooting Guide Trouble Shooting Symptom Possible cause Poor Picture Quality The level of Signal strength is low. Receiver not responding to remote control unit RCU batteries are dead or inserted incorrectly. The RCU is pointing toward wrong direction. Receiver is on but no picture or sound except the following messages (No signal, Locked channel, Not available) No Signal Channel is not available. Channel is locked. Service installation not yet done. The level of Signal strength is low. LNB is out of order. The cable from the LNB is incorrectly connected. Settings you made in the menu have now changed The position of the dish is aligned incorrectly. The receiver lost power before being able to enter into standby mode. Some of the Settings saved by user can be deleted partly or fully. 29