NKCR.E Auxiliary Devices. Auxiliary Devices

Similar documents
EU DECLARATION OF CONFORMITY

E3X-DA-S. Digital Fiber Sensors. Perfection Transcended! A Wealth of Advanced Functions for Easy and Reliable Application

EU DECLARATION OF CONFORMITY

NKPZ.E Motor Controllers, Float- and Pressure-operated. Motor Controllers, Float- and Pressure-operated

E3X-DA-S. Digital Fiber Sensors. Perfection Transcended! A Wealth of Advanced Functions for Easy and Reliable Application

FKSZ2.E Drivers for Light-emitting-diode Arrays, Modules and Controllers -...

FKSZ8.E Drivers for Light-emitting-diode Arrays, Modules and Controllers Cert...

QQGQ.E Power Supplies, Information Technology Equipment Including Electrical Business Equipment

QQGQ.E Power Supplies, Information Technology Equipment Including Electrical Business Equipment

E3X-DAC-S Digital Fiber Sensor

Indicator (Square) Ultra Bright LED Type

Resolution (divisions) Pre-wired Model E6F-AB3C 360P/R 2M *2 Pre-wired Connector E6F-AB3C-C 360P/R 2M *2 Model (2 m) NPN open collector BCD 360

The Admiral Type 4 family of safety light curtains is the ideal solution for the protection of the majority of high-risk industrial applications.

Product Discontinuation Notices. Discontinuation Notice of built-in Power Supply Photoelectric sensors E3B2 series

AnyFeeder. User s Guide. AnyFeeder SXM100/140 AnyFeeder SX240/340 R235I-E-02

東莞永力電業有限公司 YUNG LI CO., LTD. Da Pu Industrial Zone, Gang Zi, Changping Town, Dong Guan City, Guangdong China.P.R.C YP-17/YC-18 SPDS P B

東莞永力電業有限公司 YUNG LI CO., LTD. Da Pu Industrial Zone, Gang Zi, Changping Town, Dong Guan City, Guangdong China.P.R.

1.1. IEC Contactors and Starters. Contents Description Relays and Timers... Miniature Controls... Contactors and Starters. XT IEC Power Control

Simple Fiber Amplifier E3X-SD/-NA

PLC DRIVEN BAND SAW SHARPENER

Ordering Information. Absolute 60-mm-dia. Rotary Encoder E6F-A. High Accuracy and Durability for Automatic Equipment.

XS_-EU. M8 and M12 Sensor Connectors. Ordering Information

Your order must include: cat. no. of the miniature contactor specified with coil voltage code and, if required, cat. no. of any accessories

1.1. IEC Contactors and Starters. Contents Description Relays and Timers... Miniature Controls... Contactors and Starters. XT IEC Power Control

東莞永力電業有限公司 YUNG LI CO., LTD. Da Pu Industrial Zone, Gang Zi, Changping Town, Dong Guan City, Guangdong China.P.R.C

110 Volt AC at 50 Hertz, 120 Volt AC at 60 Hertz. 20 Amp (UL Continuous), 7 Amp (AC-3), 22 Amp (AC-1)

ZW-7000/5000 Series. EtherCAT Cable (RJ45/RJ45) Setting Software. Ethernet *2 /USB Sysmac Studio Standard Edition SYSMAC-SE20.

VT-S730. Omron's 3D-SJI For Efficient Manufacturing of High-quality Products. Best the Minimum Q cost! PCB Inspection System VT-S730 NEW

1.1. IEC Contactors and Starters. Contents Description Relays and Timers... Miniature Controls... Contactors and Starters. XT IEC Power Control

Multi-functional safety relay modules PROTECT SRB-E

Bulletin 190 Compact. Combination Starters

1.1. Contactors and Starters... Contents Description Relays and Timers Catalog Number Selection... Product Selection...

Process Transmitter RMA 422

Lighted Pushbutton Switch (Square) Ultra Bright LED Type

File E Project December 11, 2013 REPORT DRIVERS FOR LIGHT-EMITTING DIODES ARRAYS MODULES AND CONTROLLERS

XW3D. Simple Wiring of Sensor Actuators. Connector Terminal Boxes. Specifications. Materials and Finish. Connection Combinations

Triple RTD. On-board Digital Signal Processor. Linearization RTDs 20 Hz averaged outputs 16-bit precision comparator function.

DIRECT DRIVE ROTARY TABLES SRT SERIES

1.1. IEC Contactors and Starters. Contents Description Relays and Timers... Miniature Controls... Contactors and Starters. XT IEC Power Control

UNIVERSAL DIGITAL METER DC Volts and Amps AC RMS Volts and Amps Thermocouples and RTDs Process Signals Strain Gauge and Load Cell

Safe Switching with Safe Contactors

UDC100 Universal Digital Controller. Specification. Overview. Features. Features, continued /99 Page 1 of 4

Actuators IC 20, IC 40

Tech Support: Customer Service: General Tech Questions: Tech Docs:

Bulletin 305 AC Starters

Climatic proofing Damp heat, constant, to IEC Damp heat, cyclic, to IEC

1.1. IEC Contactors and Starters. Contents Description Relays and Timers... Miniature Controls... Contactors and Starters. XT IEC Power Control

ALLEN BRADLEY TIMING RELAY

Interface Relays and Optocouplers Product group picture

Digital Input Modules for Compact FieldPoint

Ordering Information. Absolute 60-mm-dia. Rotary Encoder E6F-A. High Accuracy and Durability for Automatic Equipment

Bulletin 150, 154 Softstarters Quick Selection Table

Pluggable interface relays CR-P, CR-M, CR-U range 2CDC F0005

Gamma instabus. Technical product information

Spare Parts, Accessories, Consumable Material for Older Design Recorders

Documentation. Magnetic Encoder System (MES) Version: Date:

Selector Switches 30-mm Selector Switches Universal Design. Emphasis on Color Coding, Workability, and Safety. Operation Unit Colors

DMX and 4000 air circuit breakers from 800 to 4000 A

llen-bradley 194R-HM4-NFPA3

Medallion 7100 Series CATV Fiber Amplifier

>Inductive and. REFERENCE guide. Capacitive Sensors

High performance circuit breakers

Bulletin 100-G IEC Contactors

OPTOTRONIC Intelligent

Safety Light Curtains GuardShield

Benchtop/Rackmount Programmable Switches. Key Features & Benefits. SB/SC/SCG Series. Applications INSTRUMENTATION CATALOGUE - 73

DA Channel Audio Sample Rate Converter

Procedure And/Or Report Material

Sentinel I24 Digital Input and Output Configuration

DVM-3000 Series 12 Bit DIGITAL VIDEO, AUDIO and 8 CHANNEL BI-DIRECTIONAL DATA FIBER OPTIC MULTIPLEXER for SURVEILLANCE and TRANSPORTATION

LD-V4300D DUAL STANDARD PLAYER. Industrial LaserDisc TM Player

ZN-PD-SA. Air Particle Sensor. Continuously monitor dust fallout and particles which detract from product quality. Ordering Information.

Your First Choice for Control Systems Solutions

EZ-SCREEN. Type 4 Point-of-Operation V-Series No configuration necessary; preconfigured for Trip Output, Scan Code 1, MACHINE SAFETY

Electronic Roll Feed (ERF) Registration System

>Inductive and CATALOG. Capacitive Sensors

POC Type 4 GuardShield Standard, Remote Teach & Cascadable Safety Light Curtains

LCD Direct Drive Using HPC

System Interface Unit SIU-100/100T

GuardPLC Certified Function Blocks -- Basic Suite

Safety Light Curtains

Dissolve Control Programming : Projector/Dissolve Control Hook-Up

G5-series AC Servo Drives with Built-in EtherCAT Communications Linear Motor Type

The Evolution of Video Conversion

HDB

Specifications. Response Time. Status Indicators. Scanning Range/Resolution. Vibration. Shock. Physical Characteristics.

PRINCIPLES AND APPLICATIONS

1.1. IEC Contactors and Starters. Contents Description Relays and Timers... Miniature Controls... Contactors and Starters. XT IEC Power Control

VISUALIZED DIGITAL TIMER

Single Fiber SFP Series

Bulletin 190 IEC Modular Starter System

LINEAR ACTUATORS. Type S / SH 95, S / SH 80, S / SH 71, S / SH 56

National Park Service Photo UTAH-1OO/3. MADI Terminal.

QTi DALI 2X14/24/ DIM

*Prefer. 600 MHz 4K ULTRA. 60Hz, 4:4:4. over one SC-Terminated Fiber-Optic Cable EXT-DP-4K600-1SC. User Manual. Release A1

COVER PAGE FOR TEST REPORT

EXT-UHD600-1SC Version A1

National Park Service Photo UTAH-1OO/3. MADI Terminal.

Access Converter/ 3. Operation Manual. International Headquarters. European Headquarters. B&B Electronics. 707 Dayton Road Ottawa, IL USA

PROGRAMMABLE DC SOURCE VIEW RECORDERS Programmable DC Source FEATURES

Transcription:

NKCR.E76675 - Auxiliary Devices Page 1 of 3 Page Bottom NKCR.E76675 Auxiliary Devices Auxiliary Devices See General Information for Auxiliary Devices OMRON CORP SAFETY STANDARDS GROUP IAB QUALITY & ENVIRONMENT DEPT SHIOKOJI HORIKAWA, SHIMOGYO-KU KYOTO, 600-8530 JAPAN E76675 Trademark and/or Tradename: and/or Door lock switch, Type D4GL followed by 1, 2, 3 or 4, followed by A through H or J through M, followed by B, F, L, R, D, E, G or H, followed by A, G or N, may be followed by A, B or C, may be followed by 4, may be followed by N, may be followed by additional letter(s) and/or number(s). Door switches, Type D4BS followed by 1, followed by 1, followed by B, F, L or R, followed by S, followed by F, followed by 1, may be followed by additional letter(s) and/or number(s). Type D4BL Series followed by 1, 2, 3, or 4, followed by C, D, E or F, followed by A, B, C, D, E, F or G, followed by blank, A, B, C, D, E or F, followed by blank, 12-30 or T, followed by blank or maximum 6 digits of letters and/or numbers. Type D4GS may be followed by 1, 2, 3 or 4, may be followed by up to two letters and/or numbers, may be followed by up to six letters and/or numbers. Type D4GS-N followed by 1, 2, 3 or 4, followed by R or T, may be followed by 3, 5 or up to two letter and/or numbers, may be followed by up to six letters and/or numbers. Type D4GS-NK followed by 1, 2 or 4, may be followed by E, may be followed by up to six letters and/or numbers. Type D4NL followed by 1, 2, 3 or 4, followed by A through H, J through N or P, followed by B, D, E, F, G, L or R, followed by A, B, C, D, E, F, G, H, J, K or L, may be followed by A through F, may be followed by 4, may be followed by S, may be followed by Z, may be followed by additional letter(s) and/or number(s). Type D4NS followed by 1 through 9 or A, B or C, followed by A through F, followed by B, D, E, F, G, H, L or R, may be followed by additional letter (s) and/or number(s). Type D4N may be followed by A or H, followed by 1 through 9 or A, B or C, followed by 1, 2 or A through G, followed by 20, 21, 21-TK, 22 through 29, 2B, 2C, 2D, 2G, 2H, 2J, 2L, 31, 32, 34, 62, 63, 72, 80, 87, RE, LE, AS, BC or AS1, may be followed by R, may be followed by additional letter (s) and/or number(s). Type D4N, followed by blank, followed by 9, followed by 1, followed by 20, followed by GP. Type D4JL, followed by 1, 2, 3 or 4, followed by A through H, J through N or P through R, followed by D or F, followed by A, G or K, followed by C or D, followed by 5, 6 or 7, followed by blank, followed by blank, Y or Z, may be followed by four alphanumeric code, may be followed by six digit maximum alphanumeric code. Interlock relay, Cat. No. D9MCD1. Limit switches, Type D4C may be followed by C, followed by 1, 2, 3, 4, 5 or 6, may be followed by additional suffix numbers. Type D4C followed by 10, 20, 30, A0, C0 or D0, followed by a two digit number, followed by DRAJ01 or ARAJ01, may be followed by additional letters and/or numbers.

NKCR.E76675 - Auxiliary Devices Page 2 of 3 Type D4BS followed by -1, -2, -3, -4, -5, -6, -7 or -8, followed by 5, 6, 7, 8, A or B, followed by F, R, L or B, followed by S, may be followed by LD or LE, may be followed by additional numbers and/or letters. Type D4A receptacle Cat. No. D4A- followed by 1000N through 6000N, 1000, 2000, 3000, 4000, 5000 or 6000, may be followed by additional numbers and/or letters; actuator head Cat. No. D4A-00 followed by 01N through 06N, 07-VN, 07-HN, 08N through 12N or 14N through 20N or 24N, may be followed by additional letters and/or numbers; body Cat. No. D4A-0 followed by 100N, 300N, 500N, 700N or 900N, may be followed by additional numbers and/or letters. Type D4F followed by 1 through 5, followed by 0 or 2, followed by 0, 2, 3, G or H, followed by a number, followed by R, L or D, may be followed by letters and/or numbers. Type D4A, followed by 3, may be followed by E, followed by 01-06, 07-V, 07-H, 08-12, 14-20 or 24, may be followed by N, followed by GM or KGM, may be followed by additional letter(s) and/or number(s). Type SHL, followed by D, Q or W, with or without 1 or 2 digit number, followed by 55, followed by blank, followed by blank, L, L6 or L7, followed by blank, MD, ML or MR, followed by blank, 2 or 3, followed by blank, TC or TH, followed by blank or 11; followed by blank or T; followed by blank or up to six additional letters and/or numbers. Type WL may be followed by R, may be followed by 01, may be followed by A or B, may be followed by M, followed by C#, D#, G#, H#, NJ# or SD#, where # is up to a ten digit symbol of letters and/or numbers, may be followed by 10, 31 or RP, may be followed by P1, may be followed by 55, may be followed by T, TC, TC2 or TH, may be followed by 13##, 14##, RP4##, RP5## or RP6##, where ## is a one or two digit symbol of letters and/or numbers, may be followed by C, G, G1, TS or Y, may be followed by LD, LDN or LE, may be followed by A or F, may be followed by S, may be followed by DGJS03, DGJ###, DK1CJ###, DK1EJ###, M1J###, M1GJ###, M5J###, DHJS###, AGJ###, AK1EJ####, AK1J###, AK4EJ### or K###, where ### is up to a five digit symbol of letter(s) and/or number(s), may be followed by up to a five digit symbol of letters and/or numbers. Type WL, may be followed by R, followed by C, D, G, H, NJ, or SD, followed by a number, may be followed by LD, followed by GM, KGM or K-GM, may be followed by additional letter(s) and/or number(s). Type D4B-F, followed by 1, 2, 3 or 4, followed by 1, 2 or 3, followed by 11, 15, 1F or 1R, followed by F, may be followed by 1, followed by additional letter(s) and/or number(s). Types ZE, ZV, ZV2 may be followed by -01 or Y, followed by N or Q, followed by 6 letters and/or numbers, may be followed by 2, may be followed by G, G1, S or Y, may be followed by TC or TH, may be followed by additional letters and/or numbers. Type D4B followed by -1, -2, -3, -4, -5, -6, -7 or -8, followed by 1, 2, 3, 4, 5, 6, 7, 8, A, B, C or D, followed by 1 thru 8 or 00, may be followed by up to two numbers or letters, followed by N, may be followed by LD or LE, may be followed by letters and/or numbers. Magnetically actuated interloc switches, Models D40B-J1X, -J2X. Magnetically actuated switches, Cat. Nos. D40B-1B3, D40B-1B10, D40B-1D3, D40B-1D10, D40B-A1, D40B-S1B3, D40B-S1B10, D40B-S1D3, D40B-S1D10, D40B-2B3, D40B-2B10, D40B-2D3, D40B-2D10, D40B-A2, D40B-S2B3, D40B-S2B10, D40B-S2D3, D40B-S2D10, D40B-3D5C, D40B-3E5C, D40B-A3, D40B-S3D5C, D40B-S3E5C, D40B-J1, D40B-J2. Non-contact safety door switch, Model(+) D40A-1C followed by 2 or 5. Non-contact door switch, Actuator only Model D40A-A1. Non-contact door switch,, Sensor only Model D40A-S1C followed by 2 or 5. Pendant enable switch, Model A4EG- followed by B or C, followed by 00, E1, E2, M2, P1 or P2, followed by 0, B, R, Y or G, followed by 0, followed by 1, 2 or 4, followed by 0 or 1, may be followed by A, may be followed by letters B through Z, b through z, and/or numbers. Thermal overload relays, Cat. Nos. j7tl-d2, -E2, -F2, j7tl-d, -E, -F, -A, -B, -C. Terminal relay, Model F3SP-T01. (+) = Additional functional safety investigation was completed to UL 991 and IEC 60947-5-3. Last Updated on 2009-10-22 Questions? Print this page Notice of Disclaimer Page Top Copyright 2010 Underwriters Laboratories Inc. The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Listed and covered under UL's Follow-Up Service. Always look for the Mark on the product.

NKCR.E76675 - Auxiliary Devices Page 3 of 3 UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Designs and/or Listings (files) must be presented in their entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from Underwriters Laboratories Inc." must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: "Copyright 2010 Underwriters Laboratories Inc. "

NKCR7.E76675 - Auxiliary Devices Certified for Canada Page 1 of 3 Page Bottom NKCR7.E76675 Auxiliary Devices Certified for Canada Auxiliary Devices Certified for Canada See General Information for Auxiliary Devices Certified for Canada OMRON CORP SAFETY STANDARDS GROUP IAB QUALITY & ENVIRONMENT DEPT SHIOKOJI HORIKAWA, SHIMOGYO-KU KYOTO, 600-8530 JAPAN E76675 Auxiliary contact blocks, Cat. Nos. J73L-B, J73L-C, J7L-BR. Door lock switch, Type D4GL followed by 1, 2, 3 or 4, followed by A through H or J through M, followed by B, F, L, R, D, E, G or H, followed by A, G or N, may be followed by A, B or C, may be followed by 4, may be followed by N, may be followed by additional letter(s) and/or number(s). Door switches, Type D4BL Series, followed by 1, 2, 3, or 4, followed by C, D, E or F, followed by A, B, C, D, E, F, or G, followed by blank, A, B, C, D, E, or F, followed by blank, 12-30, or T, followed by blank or maximum 6 digits of letters and/or numbers. Type D4GS may be followed by 1, 2, 3, or 4, may be followed by up to two letters and/or numbers, may be followed by up to six letters and/or numbers. Type D4GS-N followed by 1, 2, 3 or 4, followed by R or T, may be followed by 3, 5 or up to two letter and/or numbers, may be followed by up to six letters and/or numbers. Type D4GS-NK followed by 1, 2 or 4, may be followed by E, may be followed by up to six letters and/or numbers., Type D4BS followed by 1, followed by 1, followed by B, F, L or R, followed by S, followed by F, followed by 1, may be followed by additional letter (s) and/or number(s). Hand mixer, Model KJ-805. Interlock relay, Cat. No. D9MCD1. Limit switches, Type D4B-F, followed by 1, 2, 3 or 4, followed by 1, 2 or 3, followed by 11, 15, 1F or 1R, followed by F, may be followed by 1, followed by additional letter(s) and/or number(s). Cat. No. D4C may be followed by C, followed by 1 or 2, may be followed by additional number or letters. Type D4C may be followed by C, followed by 1, 2, 3, 4, 5 or 6, may be followed by additional suffix numbers. Type D4C followed by 10, 20, 30, A0, C0 or D0 followed by a two digit number, followed by DRAJ01 or ARAJ01, may be followed by additional letter(s) and/or numbers. Type D4BS followed by -1, -2, -3, -4, -5, -6, -7 or -8, followed by 5, 6, 7, 8, A or B, followed by F, R, L or B, followed by S, may be followed by LD or LE, may be followed by additional numbers and/or letters. Type D4A, Receptacle Cat. No. D4A- followed by 1000N through 6000N, 1000, 2000, 3000, 4000, 5000 or 6000, may be followed by additional numbers and/or letters; Actuator head Cat. No. D4A-00 followed by 01N through 06N, 07-HN, 07-VN, 08N through 12N or 14N through 20N or 24N, may be followed by additional letters and/or numbers; Body Cat. No. D4A-0 followed by 100N, 300N, 500N, 700N, 900N, may be followed by additional numbers and/or letters. Type D4A, followed by 3, may be followed by E, followed by 01-06, 07-V, 07-H, 08-12, 14-20 or 24, may be followed by N, followed by GM or KGM, may be followed by additional letter(s) and/or number(s). Type D4F, followed by 1 through 5, followed by 0 or 2, followed by 0, 2, 3, G or H, followed by a number, followed by R, L or D, may be followed by additional letters and/or numbers.

NKCR7.E76675 - Auxiliary Devices Certified for Canada Page 2 of 3 Type SHL, followed by D, Q or W, with or without 1 or 2 digit number, followed by 55, followed by a blank, followed by blank, L, L6 or L7, followed by blank, MD, ML or MR, followed by a blank, 2 or 3, followed by a blank, TC or TH, followed by blank or 11, followed by blank or T; followed by a blank or up to six additional letters and/or numbers. Type WL may be followed by R, may be followed by 01, may be followed by A or B, may be followed by P, followed by C#, D#, G#, H#, NJ# or SD#, where # is up to a ten digit symbol of letters and/or numbers, may be followed by 10, 31 or RP, may be followed by P1, may be followed by 55, may be followed by T, TC, TC2 or TH, may be followed by 13##, PR4##, PR5## or RP6##, where ## is a one or two digit symbol of letters and/or numbers, may be followed by C, G, G1, TS or Y, may be followed by LD, LDN or LE, may be followed by A or F, may be followed by S, may be followed by DGJS03, DGJ###, DK1CJ###, DK1EJ###, M1J###, M1GJ###, M5J###, DHJS###, AGJ###, AK1EJ####, AK1J###, AK4EJ### or K###, where ### is up to a five digit symbol of letter(s) and/or number(s), may be followed by up to a five digit symbol of letters and/or numbers. Type WL, may be followed by R, followed by C, D, G, H, NJ, or SD, followed by a number, may be followed by LD, followed by GM, KGM or K-GM, may be followed by additional letter(s) and/or number(s). Types ZE, ZV, ZV2 may be followed by -01 or Y, followed by N or Q, followed by six letters and/or numbers, may be followed by 2, may be followed by G, G1, S or Y, may be followed by TC or TH, may be followed by additional letters and/or numbers. Type D4B followed by -1, -2, -3, -4, -5, -6, -7 or -8, followed by 1, 2, 3, 4, 5, 6, 7, 8, A, B, C or D, followed by 1 thru 8 or 00, may be followed by up to two numbers or letters, followed by N, may be followed by LD or LE, may be followed by letters and/or numbers. Magnetically actuated switches, Cat. Nos. D40B-1B3, D40B-1B10, D40B-1D3, D40B-1D10, D40B-A1, D40B-S1B3, D40B-S1B10, D40B-S1D3, D40B-S1D10, D40B-2B3, D40B-2B10, D40B-2D3, D40B-2D10, D40B-A2, D40B-S2B3, D40B-S2B10, D40B-S2D3, D40B-S2D10, D40B-3D5C, D40B-3E5C, D40B-A3, D40B-S3D5C, D40B-S3E5C, D40B-J1, D40B-J2. Non-Contact Safety Door Switch, Model(+) D40A-1C, followed by 2 or 5. Non-contact door switch, Actuator only Model D40A-A1. Non-contact door switch,, Sensor only Model D40A-S1C followed by 2 or 5. Pendant enable switch, Model A4EG- followed by B or C, followed by 00, E1, E2, M2, P1 or P2, followed by 0, B, R, Y or G, followed by 0, followed by 1, 2 or 4, followed by 0 or 1, may be followed by A, may be followed by letters B through Z, b through z, and/or numbers. Switches, Type D4NL followed by 1, 2, 3 or 4, followed by A through H, J through N or P, followed by B, D, E, F, G, L or R, followed by A, B, C, D, E, F, G, H, J, K or L, may be followed by A through F, may be followed by 4, may be followed by S, may be followed by Z, may be followed by additional letter(s) and/or number(s). Type D4NS followed by 1 through 9 or A, B or C, followed by A through F, followed by B, D, E, F, G, H, L or R, may be followed by additional letter (s) and/or number(s). Type D4N may be followed by A or H, followed by 1 through 9 or A, B or C, followed by 1, 2 or A through G, followed by 20, 21, 21-TK, 22 through 29, 2B, 2C, 2D, 2G, 2H, 2J, 2L, 31, 32, 34, 62, 63, 72, 80, 87, RE, LE, AS, BC or AS1, may be followed by R, may be followed by additional letter (s) and/or number(s). Type D4N, followed by blank, followed by 9, followed by 1, followed by 20, followed by GP. Type D4JL, followed by 1, 2, 3 or 4, followed by A through H, J through N or P through R, followed by D or F, followed by A, G or K, followed by C or D, followed by 5, 6 or 7, followed by blank, followed by blank, Y or Z, may be followed by four alphanumeric code, may be followed by 6 digit maximum alphanumeric code. Terminal relay, Model F3SP-T01. Thermal overload relays, Cat. Nos. j7tl-d2, -E2, -F2, 7TL-D, -E, -F, -A, -B, -C. (+) = Additional functional safety investigation was completed to UL 991 and IEC IEC 60947-5-3. Trademark and/or Tradename: and/or Last Updated on 2009-10-22 Questions? Print this page Notice of Disclaimer Page Top Copyright 2010 Underwriters Laboratories Inc. The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Listed and covered under UL's Follow-Up

NKCR7.E76675 - Auxiliary Devices Certified for Canada Page 3 of 3 Service. Always look for the Mark on the product. UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Designs and/or Listings (files) must be presented in their entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from Underwriters Laboratories Inc." must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: "Copyright 2010 Underwriters Laboratories Inc. "

OMRON AUTOMATION AND SAFETY THE AMERICAS HEADQUARTERS Chicago, IL USA 847.843.7900 800.556.6766 www.omron247.com OMRON CANADA, INC. HEAD OFFICE Toronto, ON, Canada 416.286.6465 866.986.6766 www.omron247.com OMRON ELECTRONICS DE MEXICO HEAD OFFICE México DF 52.55.59.01.43.00 01-800-226-6766 mela@omron.com OMRON ELECTRONICS DE MEXICO SALES OFFICE Apodaca, N.L. 52.81.11.56.99.20 01-800-226-6766 mela@omron.com OMRON ARGENTINA SALES OFFICE Cono Sur 54.11.4783.5300 OMRON CHILE SALES OFFICE Santiago 56.9.9917.3920 OTHER OMRON LATIN AMERICA SALES 54.11.4783.5300 OMRON ELETRÔNICA DO BRASIL LTDA HEAD OFFICE São Paulo, SP, Brasil 55.11.2101.6300 www.omron.com.br OMRON EUROPE B.V. Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. +31 (0) 23 568 13 00 www.industrial.omron.eu Authorized Distributor: Automation Control Systems Machine Automation Controllers (MAC) Programmable Controllers (PLC) Operator interfaces (HMI) Distributed I/O Software Drives & Motion Controls Servo & AC Drives Motion Controllers & Encoders Temperature & Process Controllers Single and Multi-loop Controllers Sensors & Vision Proximity Sensors Photoelectric Sensors Fiber-Optic Sensors Amplified Photomicrosensors Measurement Sensors Ultrasonic Sensors Vision Sensors Industrial Components RFID/Code Readers Relays Pushbuttons & Indicators Limit and Basic Switches Timers Counters Metering Devices Power Supplies Safety Laser Scanners Safety Mats Edges and Bumpers Programmable Safety Controllers Light Curtains Safety Relays Safety Interlock Switches C85I-E-01 08/14 Note: Specifications are subject to change. 2014 Omron Electronics LLC Printed in U.S.A. Printed on recycled paper.