Licence No. ENEC-00573-A1 Page 1/7 Licence Holder Production site I GUZZINI ILLUMINAZIONE SPA VIA MARIANO GUZZINI 37 RECANATI, 62019 MC Italy I GUZZINI ILLUMINAZIONE SPA VIA MARIANO GUZZINI 37 RECANATI, 62019 MC Italy Certification Mark See Annex 1 Certified Product Fixed general purpose luminaires Model Series Linealuce Compact BM44, See Page 2 - Page 5 Trademark iguzzini Rated Voltage / Frequency 220-240 V~ ;50/60 Hz Rated Current / Power 48 x 1,7 W Insulation Class II Degree of protection (IP) 66 Tested acc. to EN 60598-1:2008/A11:2009, EN 60598-1:2008, EN 60598-2- 1:1989, EN 60598-2-6:1994/A1:1997, EN 60598-2-6:1994 Test Report No. 12CA60939 issued on 2013-11-18 Additional Certification Manager Jan-Erik Storgaard This is to certify that re presentative samp le(s) o f the P roduct desc ribed herein ( Certified Product ) hav e been investigated and found in compliance with the Standard(s) indicated on this License, in accordance with the ENEC Requirements. The Designated License holder is entitled to use the ENEC 15 M ark (as shown in annex 1) for the Certified Product manufactured at the production site(s) identified above in accordance with the ENEC Mark Service Agreement including w ithout limitation the ENEC M ark T esting and Ce rtification Services Service Terms. Onl y those Products bearing the ENEC Mark should be considered as being covered by UL s ENEC Mark Service. This License shall remain valid unless terminated earlier in accordance with the Service Agreement including without limitation if the S tandard ide ntified on this Ce rtificate is a mended or w ithdrawn pr ior the Da te of Withdr awal of conflicting Standard(s). UL International Demko A/S, Borupvang 5A, DK-2750 Ballerup, Denmark, Tel. +45 44 85 65 65, info.dk@ul.com www.ul-europe.com
Licence No. ENEC-00573-A1 Page 2/7 Model Details: Variants: This test report refers to the complete tests carried out on the luminaire: BM44 Tested together with models: RATINGS IK a DIMENSIONS (mm) WEIGHT 220 240 V 50/60 Hz 48 x 1,7 W Class II IP66 L W H IK05 74 1490 4,500 RGBW DALI BH13 RATINGS IK a DIMENSIONS (mm) 1,7 W Class II IP66 WEIGHT BI74 220 240 V 50/60 Hz 36 x 1,7 W Class II IP66 IK05 74 1585 4,600 RGB DMX Models BM44, BH13, BI74 represent the entire series. It also refers to the check of the constructional characteristics verified on the luminaire: BG96 DIMENSIONS WEIGHT RATINGS IK a L W H 220 240 V 50/60 Hz 6 x IK05 74 528 1,650 BG97 BG98 BG99 BH00 BH01 BH02 220 240 V 50/60 Hz 6 x 220 240 V 50/60 Hz 18 x 220 240 V 50/60 Hz 18 x IK05 74 528 1,650 Warm White IK05 74 1056 3,200 IK05 74 1056 3,200 Warm White IK05 74 1585 4,600 IK05 74 528 1,650 This is to c ertify tha t representative s ample(s) of the Product de scribed he rein ( Ce rtified Product ) ha ve be en investigated a nd found i n c ompliance w ith the Sta ndard(s) indic ated on t his Lic ense, in a ccordance w ith the E NEC Requirements. The Designated License holder is entitled to use the ENEC 15 Mark (as shown in annex 1) for the Certified Product manufactured at the pr oduction site(s) identified abov e in accordance with the ENEC Mark Service Agreement including w ithout limitation the E NEC M ark T esting and Cert ification S ervices S ervice T erms. O nly those Products bearing the ENEC Mark should be considered as being covered by UL s ENEC Mark Service. This License shall remain valid unless te rminated earlier in accordance w ith the S ervice Agreement including w ithout limitation if the S tandard identified on this Certificate is amended or
Page 3/7 BH03 DIMENSIONS WEIGHT RATINGS IK a L W H IK05 74 528 1,650 Warm White BH04 BH05 BH06 BH08 BH07 BH09 BH10 BH11 BH12 BH13 BI51 BI52 BI53 BI54 BI55 BI56 IK05 74 1056 3,200 IK05 74 1056 3,200 Warm White IK05 74 1585 4,600 IK05 74 528 1,650 IK05 74 528 1,650 Warm White IK05 74 1056 3,200 IK05 74 1056 3,200 Warm White IK05 74 1585 4,600 IK05 74 528 1,650 * IK05 74 528 1,650 Warm White * IK05 74 1056 3,200 * IK05 74 1056 3,200 Warm White * IK05 74 1585 4,600 * * BI57 IK05 74 528 1,650 dimmable DALI BI58 IK05 74 528 1,650 DALI BI59 IK05 74 1056 3,200 dimmable DALI
Page 4/7 BI60 DIMENSIONS RATINGS IK a WEIGHT L W H IK05 74 1056 3,200 DALI BI61 IK05 74 1585 4,500 dimmable DALI BI62 IK05 74 1585 4,500 DALI BI63 IK05 74 528 1,650 dimmable DMX BI IK05 74 528 1,650 DMX BI65 IK05 74 1056 3,200 dimmable DMX BI66 IK05 74 1056 3,200 DMX BI67 IK05 74 1585 4,500 dimmable DMX BI68 IK05 74 1585 4,500 DMX BI69 BI70 BI71 BI72 BI73 BI74 BP12 BP13 BP14 BP15 220 240 V 50/60 Hz 36 x 220 240 V 50/60 Hz 36 x IK05 74 506 1,650 RGB DALI IK05 74 998 3,200 RGB DALI IK05 74 1490 4,500 RGB DALI IK05 74 506 1,650 RGB DMX IK05 74 998 3,200 RGB DMX IK05 74 1490 4,500 RGB DMX IK05 74 506 1,650 RGB DALI ** IK05 74 998 3,200 RGB DALI ** IK05 74 506 1,650 RGB DMX ** IK05 74 998 3,200 RGB DMX **
Page 5/7 RATINGS IK a DIMENSIONS WEIGHT BM42 220 240 V 50/60 Hz 16 x IK05 74 506 1,650 RGBW DALI BM43 220 240 V 50/60 Hz 32 x IK05 74 998 3,200 RGBW DALI BM44 220 240 V 50/60 Hz 48 x IK05 74 1490 4,500 RGBW DALI BM45 BM46 BM47 BN87 BN88 BN89 BN90 BN91 BN92 BM63 BM BM65 BM66 BM67 BM68 220 240 V 50/60 Hz 16 x 220 240 V 50/60 Hz 32 x 220 240 V 50/60 Hz 48 x 220 240 V 50/60 Hz 17 x 220 240 V 50/60 Hz 49 x 220 240 V 50/60 Hz 17 x 220 240 V 50/60 Hz 49 x 220 240 V 50/60 Hz 36 x 220 240 V 50/60 Hz 36 x IK05 74 506 1,650 RGBW DMX IK05 74 998 3,200 RGBW DMX IK05 74 1490 4,500 RGBW DMX IK05 74 540 1,750 WRGBW DALI IK05 74 1026 3,300 WRGBW DALI IK05 74 1511 4,500 WRGBW DALI IK05 74 540 1,750 WRGBW DMX IK05 74 1026 3,300 WRGBW DMX IK05 74 1511 4,600 WRGBW DMX IK05 74 506 1,650 WNC DALI WNC DALI IK05 74 998 3,200 WNC DALI IK05 74 1490 4,500 IK05 74 506 1,650 WNC DMX IK05 74 998 3,200 WNC DMX IK05 74 1490 4,500 WNC DMX
Page 6/7 Additional Information: This Certificate replace earlier issued ENEC certificate No. ENEC-00573, issued on 2013-04-10 due to add alternate components.
Annex 1 to Licence No. ENEC-00573-A1 Annex of the form of the Mark * Identification number of the Size of the mark: The size of the mark may be reduced on the condition that it remains legible and that the ratio b/a=1,7 is kept This is to ce rtify that r epresentative sample(s) of the Product described herein ( Certified Product ) have been investigated and fo und in comp liance with the Standard(s) indicated on this License, in acco rdance with the ENEC Requirements. The Designated License holder is entitled to use the ENEC 15 Mark (as shown in annex 1) for the Certified Product manufactured at the production site(s) identified above in accordance with the ENEC Mark Service Agreement including without limitation the ENEC Mark Testing and Certification Services Se rvice T erms. Only thos e Pr oducts b earing the ENEC M ark s hould be c onsidered a s be ing covered by UL s ENEC Mark Service. This License shall remain valid unless terminated earlier in accordance with the S ervice Agreement inc luding w ithout limita tion if the S tandard ide ntified on this Ce rtificate is amended or