MU Connector Series Single Mode Small Form Factor Connector FEATURES qhigh quality, high precision Ø 1. zirconia ferrule produced by SII s integrated production process from molding to final inspection. qinternational standard IEC6174-6 conformity.
SPECIFICATIONS AND FEATURES OF CONNECTOR PARTS uthe fiber insertion inlet of the tail of Ø 1. zirconia ferrule is made in the shape of 6 degrees cone by injection molding in order to facilitate the insertion of optical fiber. usatisfy vertical burning test for classifying materials UL94 V- (excluding cap). uplastic made protection cap is mounted on the frame so as to completely prevent the contamination of ferrule surface resulting from the contact of cap itself and edge surface. umu Angle PC application provides low insertion loss and high return loss Ferrule Model MUZ-1A Series Hole eccentricity (mm). or less Hole diameter (mm) Ø.1 or Ø.1 or Ø.126 +.1/ - Outer diameter (mm) Ø 1.249 ±. Feature uprecise injection molding uless pin-hole and defects usmooth shape of tail has 6 V cone & round Housing Model SMU-C1 series SMU-C2 series SMU2-C1 jack type series SMU2-C2 jack type series Applicable fiber Ø.9 SM buffer Ø 1.6, Ø 2 SM cord Features ulight weight and easier assemble uwide cable size is available to adapt by plastic stop ring heat shrink tube with adhesive ushort length (3 mm) for inside usuitable design of Hood to adapt use application of equipment Bellcore specification Satisfy vertical burning test for classifying materials UL94 V- (excluding cap) Protection cap to fit inside of frame. Never touch ferrule surface at all. Duplex Housing Model Horizontal duplex Housing Vertical duplex housing SMU-F2PH series SMU-2PH series Applicable fiber Ø.9 buffer cable and Ø 2 jacketed cable Applicable SMU-F2A Horizontal duplex adaptor SMU-2A62 Vertical duplex adaptor adaptors SMU-8A62 Vertical 8-ports adaptor Adaptor Model Simplex adaptor Horizontal duplex Vertical duplex Vertical 8-ports SMU-A1 series adaptor adaptor adaptor SMU-F2A62 SMU-2A62 SMU-8A62 Features Integrated body MU simplex and Realisation of High-dense structure Horizontal duplex connection at 4.mm pitch. for strength housing MU simplex and Vertical duplex and durability can be connected. housing can be connected improvement
Reliability (SM 1/1 Advanced PC Polishing) Mechanical Test Items Conditions Performance Straight pull 7 N, 1 min (ø 2. mm cable) After Test 1 N, 1 min (ø.9 mm cable) Insertion loss increase: Bend 4.9 N, ± 9, 1 times.2 db or less Twist 4.9 N, ± 36, 1 times Return loss: Vibration 1 to HZ, 1. mmp-p, 4 db or more 2 hr (12cycles.) x 3 axis Shock 1 G (=98 m/s), 6 ms, half sine wave-form Repetitive operation 1 times During and after test Insertion loss increase:.2 db or less After test Return loss: 4 db or more Environmental Test Items Conditions Performance Thermal cycle -4 OR 8 C, 6 hr/cyc, 1 cyc During and after test Insertion loss Temperature humidity -1 OR to 6 C, 93% RH, increase:.2 db or less change 24 hr/cyc, 2 cyc After Test Return loss: 4 db or more Thermal Shock -4 OR 8 C, cycles, 1 hr/cycle After test Insertion loss increase: Thermal age + 8 C, 1 HR.2 db or less Cold age - 4 C, 1 HR Return loss: 4 db or more Salt mist 3 C, NaCl % (Weight Ratio), 168 hr SPECIFICATIONS AND FEATURES OF ENDFACE POLISHING usii OFL-12/ 1 polisher can mount 16-plugs / batch. Type Advanced PC UPC Return loss (db) > 4 > Radius of curvature (mm) 1 ~ Apex offset (µm) < Fiberundercut (µm). 12 1 8 6 4 2 Apex Offset 4 8 12 16 2 24 28 32 36 4 Apex Offset [µm] 16 14 12 1 8 6 4 2 Fiber Undercut - -4-3 -2-1 1 2 3 4 Fiber undercut [nm] Radius 4 3 3 2 1 1 1 11 12 13 14 1 16 17 18 19 Radius [mm]
Plug In Connector udesigned for high-dense back board interconnection ustructured by Back Board Housing to be mounted on back panel and by Package Housing to be mounted on PC board as well as by MU Plug (MU housing + ferrule), Sleeve Holder and MU Jack (MU Jack housing + ferrule) Product Name MU Back Board Duplex Housing MU Back Board 8-ports Housing MU Package Duplex Housing MU Package 8-ports Housing MU Sleeve Holder, for Back Board Type Housing Parts Number SMUC-L2HB SMUC-L8HB SMUC-L2PA2 SMUC-L8PA2 SMU-AL8PA Simplified Receptacle and Plug udesigned to save space in equipment dramatically ustandard MU Plug can be connected to another end of Receptacle usimplex, Duplex, 4-ports, 8-ports and 16-ports of Receptacles are available uzirconia Ceramic Sleeve is used uavailable inner hole diameter of MU Simplified Plug is 1 µm and 126 µm Product Name MU Simplified Simplex Receptacle MU Simplified Duplex Receptacle MU Simplified 4-ports Receptacle MU Simplified 8-ports Receptacle MU Simplified 16-ports Receptacle MU Simplified plug Parts Number SMU-SR631 SMU-2SR631 SMU-4SR631 SMU-8SR631 SMU-16SR631 SMU-PS112*
PERFORMANCE (USING 1/1 SM FIBER, IN CASE OF UPC POLISHING) 4 3 3 2 1 1 Insertion loss...1.1.2..3.3.4.4, Insertion loss [db] 4 3 3 2 1 1 Return loss 46 48 2 4 6 8 6 62 64 Return loss [db] Insertion loss [db] Repetitive Operation Test 1.8 #13 -#16.6.4.2 -.2 -.4 2 4 6 8 1 Operation Times Thermal cycle Test Fluctuation of Optical Power Insertion Loss [db]..4.3.2.1 -.1 -.2 1 2 3 4 6 Time [hr] 8 4-4 Temp [ C]. (db) 1-3.7 dbm 2-3.33 dbm 3-3.24 dbm 4-4.3 dbm -4.77 dbm 6-3.9 dbm Temperature C 6-1 Time (hr) Max. Shift (db).4/-.11.12/-.2.3/-../-.13.4/-.9./-.3 48:: Tools Product name Part number Application Crimping Tool TK-2-13 For SMU-C2, SMU-CN2 Extraction Tool for MU MXKPSR6 For Simplified connector Simplified Plug from Receptacle Insertion/Extraction Grip for MU Jack MXZ43 By set to jack housing, it's possible to connect to adaptor. Dummy Jack MXDJ61 For Plug In connector Dummy Plug MXDP61 For Adaptor, Plug in connector and Simplified connector Insertion/Extraction Tool for MU Sleeve MXKP63C For Plug In connector Holder into/from Package Housing Extraction Tool for MU Jack MXKP62C For Plug In connector from Package Housing Insertion/Extraction Tool for MU Plug MXKP61C For Plug In connector into/from Back Board Housing Insertion/Extraction Tool for MU Plug MXKP6C For Plug In connector into/from Back Board Housing Insertion/Extraction Tool for MU Plug MXKP61D For Multiplex Adaptor and Multiplex simplified into/from Adaptor receptacle
Polishing Jigs and assembly tools Polisher OFL-12 61 CE OFL 1 11 CE Items 12 pcs/ batch 16 pcs/ batch 12 pcs/ batch 16 pcs/ batch Jig KJJ41 KJJ413 KKJ411 KKJ4113 Disk KJD12 KMD12 Rubber pad KJZM631 KJZMA KLP112 KLP111 KJZMA KJP1 (std.) KLP111 KLP11 (std.) Others Thrust pin KJP17 KJP17 MU Ferrule for OFL-1 KKJ4113 MU Ferrule for OFL-12 KJJ413 Other items for assembly Adhesive curing for ferrule Curing Machine OFK-3 9 Cassette magazine MFC12 Mastercord are available to supply Adjusting cord Seiko Instruments GmbH Siemensstraße 9 D-63263 Neu-Isenburg Telefon: +49-61 2-297- Fax: +49-61 2-297-211 E-Mail: info-ofc@seiko-instruments.de www.seiko-instruments.de