Version : 1.3 PW045XS1 TECHNICAL SPECIFICATION MODEL NO. : PW045XS1 Customer s Confirmation Customer Date y PVI s Confirmation Confirmed y This technical specification is subject to change without notice. Please return 1 copy with your signature on this page for approval. Prepared y PIME VIEW INTENATIONAL CO.,LTD. 3,LI SHIN D. 1,SCIENCE-ASED INDUSTIAL PAK,HSINCHU,TAIWAN,.O.C. http://www.pvi.com.tw Date : Nov. 24, 2003 reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAE:1
TECHNICAL SPECIFICATION CONTENTS PW045XS1 NO. ITEM PAE - Cover (PW045XS1) 1 - Contents 2 1 Application 3 2 Features 3 3 Mechanical Specifications 3 4 Mechanical Drawing of TFT-LCD module 4 5 Input / Output Terminals 5 6 Pixel Arrangement and Input Connector Pin No. 6 7 Absolute Maximum atings 7 8 Electrical Characteristics 7 9 Power On Sequence 17 10 Optical Characteristics 17 11 Handling Cautions 21 12 eliability Test 22 13 Indication of Lot Number Label 22 14 lock Diagram 23 15 Packing 24 - evision History 25 reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAE:2
1. Application PW045XS1 This technical specification applies to 4.5 color TFT-LCD module, PW045XS1. The applications of the panel are car TV, portable DVD, PS, multimedia applications and others AV system.. 2. Features. Compatible with NTSC & PAL system. Pixel in stripe configuration. Slim and compact. Image eversion : Up/Down and Left/ight 3. Mechanical Specifications Parameter Specifications Unit Screen Size 4.5 (diagonal) inch Display Format 960 234 dot Active Area 99.36(H) 56.0(V) mm Dot Pitch 0.1035 (H) 0.2395 (V) mm Pixel Configuration Stripe Outline Dimension 111.5(W) 69.5(H) 6.6(D)(typ.) mm Surface Treatment Anti lare Weight 84±5 g reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAE:3
EZELOPENIN)PW045XS1 4. Mechanical Drawing of TFT-LCD Module( reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAE:4
5. Input / Output Terminals PW045XS1 TFT-LCD Module Connector FPC Down Connect, 30Pins, Pitch : 0.5 mm Pin No Symbol I/O Description emark 1 ND - round for logic circuit 2 V CC I Supply voltage of logic control circuit for gate driver Note 5-3 3 NC - No connection 4 V EE I Negative power for gate driver Note 5-4 5 NC - No connection 6 V H I Positive power for gate driver Note 5-5 7 NC - No connection 8 DIO1 I/O Vertical start pulse 9 DIO2 I/O Vertical start pulse Note 5-1 10 CPV I Shift clock for gate driver 11 U/D I Up / Down Control for gate driver Note 5-1 12 XOE3 I Output enable for gate driver 13 XOE2 I Output enable for gate driver 14 XOE1 I Output enable for gate driver 15 V COM I Common electrode voltage 16 STH1 I/O Start pulse for source driver Note 5-2 17 V SS2 - round for analog circuit 18 V I Video Input 19 V I Video Input 20 V I Video Input 21 V SS1 - round for digital circuit 22 V DD2 I Supply power for analog circuit Note 5-6 23 CPH1 I Sampling and shift clock for source driver 24 CPH2 I Sampling and shift clock for source driver 25 CPH3 I Sampling and shift clock for source driver 26 V DD1 I Supply power for digital circuit Note 5-7 27 /L I Left / ight Control for source driver Note 5-2 28 NC I No Connection 29 OEH I Output enable for source driver 30 STH2 I/O Start pulse for source driver Note 5-2 Note 5-1 U/D DIO1 DIO2 scanning direction Vcc Input output down to up ND Output input up to down Note 5-2 /L STH1 STH2 scanning direction Vcc output input left to right ND input output right to left reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAE:5
The definitions of Note 5-1,5-2 PW045XS1 U/D(PIN 11)=Low /L(PIN 27)=High U/D(PIN 11)=High /L(PIN 27)=Low Note 5-3 : V CC TYP.=+5V Note 5-4 : V EE TYP.=-12V Note 5-5 : V H TYP.=+17V Note 5-6 : V DD2 TYP.=+5V Note 5-7 : V DD1 TYP.=+3.3V 6. Pixel Arrangement and Input Connector Pin NO. Line 1 Line 960 ow 1 ow 2 ow 3 ow 4 ow 233 ow 234 ate driver Source driver Input FPC Pin 30 Pin 1 reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAE:6
PW045XS1 7. Absolute Maximum atings : The followings are maximum values, which if exceeded, may cause faulty operation or damage to the unit. ND = 0 V, Ta = 25 Parameter Symbol MIN. MAX. Unit emark V DD2-0.3 +5.8 V Supply Voltage For Source Driver V DD1-0.3 +7.0 V Supply Voltage For ate Driver V CC -0.3 +6.0 V V H -V EE -0.3 +40.0 V H Level V H -0.3 +25.0 V L Level V EE -16 +0.3 V Analog Signal Input Level V,V,V -0.2 V DD1 +0.2 V Note 7-1 Storage Temperature -10 +70 Operation Temperature 0 +60 Note 7-2 Notes 7-1 : Analog Input Voltage means V,V,V. Notes 7-2 : Operating Temperature define that contrast, response time, other display optical character are Ta=+25. 8. Electrical Characteristics 8-1) Operating Condition Parameter Symbol MIN. Typ. MAX. Unit emark Supply Voltage For Source Driver Analog V DD2 +4.5 +5.0 +5.5 V Logic V DD1 +3.0 +3.3 +3.6 V H level V H +15 +17 +19 V Supply Voltage For ate Driver DC Component L level V EE DC -13-12 -10.5 V of V EE AC Component V EE AC +6.0 V P-P of V EE Logic V CC +4.5 +5.0 +5.5 V Analog Signal input Level Amplitu +0.3 VCC-0.3 V Digital input voltage H level V IH 0.7 VDD1 - VDD1 V L level V IL -0.3-0.3 VDD1 V Digital output voltage H level V OH 0.7 VDD1 - VDD1 V L level V OL -0.3-0.3 VDD1 V V COM AC Component V COM AC - +6.0 - V P-P of V COM DC Component V COM DC 1.10 1.30 1.50 V of V COM Note 8-1 Note 8-1 : PVI strongly suggests that the V COM DC level shall be adjustable, and the adjustable level range is 1.3V±1V, every module s V COM DC level shall be carefully adjusted to show a best image performance. reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAE:7
Note 8-2: oth NTSC and PAL system Video Signal input waveform is based on 8 steps gray scale. PW045XS1 White lack White lack 4.0±0.2V White White 8-2) Current Consumption (ND=0V) Ta= 25 Parameter Symbol Condition Min. Typ. Max. Unit emark I CC V CC =+5V - 0.004 0.006 ma I EE V EE =-12V - 0.725 1.08 ma Current for Driver I H V H =+17V - 0.08 0.12 ma I DD1 V DD1 =+3.3V - 1.2 3.0 ma I DD2 V DD2 =+5V - 7.0 10.0 ma 8-3) acklight driving & Power Consumption Pin No Symbol Description emark 1 VL1 Input terminal (Hi voltage side) 2 VL2 Input terminal (Low voltage side) Note 8-3 Note 8-3 : Low voltage side of backlight inverter connects with round of inverter circuits. Ta= 25 Parameter Symbol Min. Typ. Max. Unit emark Lamp voltage V L 350 371 400 Vrms Lamp current I L 3 6 7 ma Note 8-4 Lamp frequency P L 45 60 - KHz Note 8-5 Kick-off voltage(25 ) Vs - - 610 Vrms Note 8-6 Kick-off voltage(0 ) Vs - - 830 Vrms Note 8-6 Note 8-4 : In order to satisfy the quality of /L, no matter use what kind of inverter, the output lamp current must between Min. and Max. to avoid the abnormal display image caused by /L. Note 8-5 : The waveform of lamp driving voltage should be as closed to a perfect SIN wave as possible. Note 8-6 : This value is not output voltage of inverter. The voltage of inverter must larger than the starting voltage. Power Consumption Ta= 25 Parameter Symbol Conditions TYP. Unit emark LCD Panel Power Consumption 49.0 mw Note 8-7 acklight Lamp Power Consumption 2.23 W Note 8-8 Total Power Consumption 2.28 W Note 8-7:The power consumption for backlight is not included. Note 8-8:acklight lamp power consumption is calculated by I L V L. reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAE:8
8-4) Input / Output Connector acklight Connector JST H-02VS-1, Pin No. : 2, Pitch : 4 mm PW045XS1 8-5) Timing Characteristics Of Input Signals Characteristics Symbol Min. Typ. Max. Unit emark ising time t r - - 10 ns Falling time t f - - 10 ns High and low level pulse width t CPH 147 156 166 ns CPH1 CPH pulse duty t CWH 30 50 70 % CPH1 STH setup time t SUH 20 - - ns STH1,STH2 STH hold time t HDH 20 - - ns STH1,STH2 STH pulse width t STH - 1 - t CPH STH1,STH2 STH period t H 61.5 63.5 65.5 μs STH1,STH2 OEH pulse width t OEH - 1.6 - μs OEH Sample and hold disable time t DIS1-4.4 - μs OEV pulse width t OEV - 12 - μs XOE CKV pulse width t CKV - 32 - μs CPV Clean enable time t DIS2-6 - μs Horizontal display timing range t DH - 960 - t CPH /3 STV setup time t SUV 400 - - ns DIO1,DIO2 STV hold time t HDV 400 - - ns DIO1,DIO2 STV pulse width t STV - - 1 t H DIO1,DIO2 Horizontal lines per field t V 256 262 268 t H Vertical display start t SV 3 - t H Vertical display timing range t DV 234 - t H VCOM rising time t rcom - 5 μs VCOM falling time t fcom - 5 μs VCOM delay time t DCOM - 3 μs delay time t D - 1 μs reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAE:9
8 6) Signal Timing Waveforms PW045XS1 STH1(2) tcwh 50% 50% CPH1 tcph CPH2 (L) CPH3 (L) FtSUH thdh tsth 10% tr tf 90% 90% 10% ig.8-1samplingclocktiming reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAE:10
PW045XS1 Input (STH1/STH2) Output (STH2/STH1) CPH1 tdh Fig. 8-2 Horizontal display timing range reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAE:11
PW045XS1 (HSY) OEH STH1(2) XOE CPV VCOM V L V(,,) VC DC V L DC VIDC 1H lack lank th White VIA VIAC VC AC V L AC lank lack White Fig. 8-3 (a) Horizontal timing reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAE:12
PW045XS1 1H (HSY) OEH toeh tdis1 tsth STH1(2) toev XOE tdis2 tckv CPV tdcom 90% VCOM 50% 10% trcom V L V L DC V L AC V(,,) td Note : The falling edge of OEV should be synchronized with the falling edge of OEH Fig. 8-3 (b) Detail horizontal timing 90% 10% tfcom reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAE:13
PW045XS1 DIO1(2) CPV ts1v th2v tckv 1H Fig. 8-4 Vertical shift clock timing reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAE:14
Vertical timing (From up to down) PW045XS1 V(,,) (HSY) (VSY) DIO1 V COM (Odd field) V COM (Even field) Display on panel first line Fig. 8-5 (a) Vertical timing (From Up to Down) tsv reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAE:15
Vertical timing (From down to up) PW045XS1 V(,,) (HSY) (VSY) DIO2 V COM (Odd field) V COM (Even field) Display on panel first line tsv Fig. 8-5 (b) Vertical timing (From Down to Up) reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAE:16
9. Power On Sequence The Power on Sequence only effect by V CC,V SS,V DD,V EE and V H, the others do not care. PW045XS1 V H V DD,V CC V SS (0V) V EE OFF ON OFF T1 T2 Logic signal -Video signal T4 T3 1) 10ms T1<T2 2) 0ms<T3 T4 10ms 10. Optical Characteristics 10-1) Specification: Ta = 25 Parameter Symbol Condition MIN. TYP. MAX. Unit emarks Horizontal θ21, θ22 45 50 --- deg Note 10-1 Viewing Vertical θ11 C 10 30 35 --- Deg Note 10-1 Angle θ12 10 15 --- deg Note 10-1 Contrast atio C At optimized 200 350 --- Note 10-2 Viewing angle esponse time ise Tr θ=0 --- 15 30 ms Fall Tf --- 30 50 ms Note 10-4 Transmission atio 8.0 8.5 --- % Uniformity U 70 85 --- % Note 10-5 rightness 350 400 --- cd/ m2 Note 10-3 White x θ=0 0.271 0.301 0.331 Chromaticity y θ=0 0.280 0.310 0.340 Note 10-3 Lamp Life Time +25 20000 --- hrs reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAE:17
PW045XS1 Note 10-1 : The definitions of viewing angles Luminance when Testing point is White Note 10-2 : C = Luminance when Testing point is lack (Testing configuration see 10-2 ) Contrast atio is measured in optimum common electrode voltage. Note 10-3 : Topcon M-7(fast) luminance meter 2 field of view is used in the testing (after 20~30 minutes operation). Lamp Current 6mA Inverter model : TDK-347 reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAE:18
PW045XS1 Note 10-4 : The definition of response time : 100% 90% White lack White rightness 10% 0% Tr Tf Note 10-5: The uniformity of LCD is defined as The Minimum rightness of the 9 testing Points U = The Maximum rightness of the 9 testing Points Luminance meter : M-5A or M-7 fast(topcon) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module The test pattern is white (ray Level 63). 25% 50% 75% 25% 50% 75% reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAE:19
10-2) Testing configuration PW045XS1 M-7(fast) 500mm Caution: 1. Environmental illumination 1 lux 2. efore test C, Vcom voltage must be adjusted carefully to get the best C.,, signal Pattern generator input LCD acklight LCD Display Testing Point Testing Point Pattern A,, Waveform of Pattern A at Testing Point 63.6μs 63.6μs Pattern waveform Vcom Vw=1.3V +/- 0.2V,, Waveform of Pattern at Testing Point 63.6μs 63.6μs waveform Vcom Vb=5.0V +/- 0.2V reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAE:20
PW045XS1 11. Handling Cautions 11-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Please connect the ground pattern of the inverter circuit surely. If the connection is not perfect, some following problems may happen possibly. 1. The noise from the backlight unit will increase. 2. The output from inverter circuit will be unstable. 3. In some cases a part of module will heat. c) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. d) Protective film (Laminator) is applied on surface to protect it against scratches and dirts. It is recommended to peel off the laminator before use and taking care of static electricity. 11-2) Precautions in mounting a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. c) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. d) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 11-3) Adjusting module a) Adjusting volumes on the rear face of the module have been set optimally before shipment. b) Therefore, do not change any adjusted values. If adjusted values are changed, the specifications described may not be satisfied. 11-4) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. f) Please adjust the voltage of common electrode as material of attachment by 1 module. reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAE:21
12. eliability Test PW045XS1 No Test Item Test Condition 1 High Temperature Storage Test Ta = +70, 240 hrs 2 Low Temperature Storage Test Ta = -10, 240 hrs 3 High Temperature Operation Test Ta = +60, 240 hrs 4 Low Temperature Operation Test Ta = 0, 240 hrs 5 High Temperature & High Humidity Operation Test Ta = +60, 80%H, 240 hrs 6 Thermal Cycling Test -25 +70, 200 Cycles (non-operating) 30 min 30 min 7 8 9 Vibration Test (non-operating) Shock Test (non-operating) Electrostatic Discharge Test (non-operating) Ta: ambient temperature Frequency:10 ~ 55 H Z Amplitude:1.5 mm Sweep time: 11 mins Test Period : 6 Cycles for each direction of X, Y, Z 100, 6ms Direction : ±X, ±Y, ±Z Cycle : 3 times 200pF, 0Ω ±200V 1 time / each terminal [Criteria] Under the display quality test conditions with normal operation state, there should be no change which may affect practical display function. 13. Indication of Lot Number Label Indicated contents of the label OOO-OOOOOO PW045XS1XX Lot number Module number Contents of lot number : 1 st ~3 rd The OEM product 5 th Production year : 1999 9, 2000 A, 2001.. 6 th Production month : 1, 2, 3,.9, A,, C 7 th ~8 th Production size : 4.5 45 9 th ~10 th Serial numbers : 01~99 reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAE:22
14. lock Diagram PW045XS1 LCD Panel V Driver (ate) H Driver (Source) 30 PIN Input Inverter ack-light reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAE:23
15. Packing PW045XS1 reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAE:24
PW045XS1 evision History ev. Issued Date evised Contents 0.1 Feb. 13, 2003 NEW 0.2 May 08, 2003 Page 6 : Add Pixel Arrangement and Input Connector Pin NO. 0.3 Jun. 05, 2003 Page 8 : Modify Current Consumption Page 24 : Add Packing Drawing 1.0 Jun. 13, 2003 Page 8 : Add Lamp & Power Consumption 1.1 Aug. 29, 2003 Page 4 : Modify Mechanical Drawing of TFT-LCD Module Page 7 : Modify Operating Condition(from V L to V EE ) Page 8 : Modify Power Consumption (Exchange V DD1 & V DD2 ) 1.2 Sep. 19, 2003 Page 8: Modify Current Consumption & Power Consumption 1.3 Nov. 24, 2003 Page 17: Modify Optical Characteristics (Contrast atio Min. from 110 to 200 & Typ. from 150 to 350) reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAE:25
Version:2.0 SUNFUL DIITAL TECHNOLOY LIMITED. www.sunful-tft.com SPECIFICATION SFW045XS1-AV Customer Approved Customer Date y Sunful s Confirmation Approved y Prepared y oom A,18/F,Haiying uliding,fuhua d, Futian District, Shenzhen. Tel: +86-755-82911760 82911758 Fax:+86-755-82915120 All information is subject to change without notice. Please confirm the sales representation before starting to design your system - 1 - Date: 2005.1.10
SUNFUL DIITAL TECHNOLOY LIMITED. www.sunful-tft.com CONTENTS eneral Description..3 Features.3 Applications 3 Driving oard Function lock.4 Application Schematic Diagrams.5 Electronic Characteristics..6 Connector Pin Definition..7 Outline Dimension 8 All information is subject to change without notice. Please confirm the sales representation before starting to design your system - 2 -
SUNFUL DIITAL TECHNOLOY LIMITED. www.sunful-tft.com eneral Description: This Color TFT LCD Driving oard apply to drive PVI s PW045XS series Color TFT LCD Panel, The Driving oard provides all the Needs to convert Composite video signal to the proper interface of LCD Panel.It can accept PAL and NTSC Video signal input. Features: Fit PIME VIEW PW045XS series TFT LCD Ultra Compact DC/DC DC/AC Video Decoder All In One PAL or NTSC Video input Up/Down Display everse Left/ight Display everse Single Operation Voltage 12V Applications: Security Video ame Door Phone Video Phone Portable TV Instrument Display Video input signal: Composite Video Signal 1.0Vp-p 75 Work temperature: -20 0 C +70 0 C Storage temperature: -30 0 C +80 0 C All information is subject to change without notice. Please confirm the sales representation before starting to design your system - 3 -
SUNFUL DIITAL TECHNOLOY LIMITED. www.sunful-tft.com Driving oard Function lock: Composite Video signal (1Vpp, 75 ohm) +12V CN2 Video signal process IC I3Y31M DC/DC +5V +17v +3.3-15V Alternated H.V Composite sync Inverter CN PLL TFT LCD Panel I/F LCD FPC cable LCD panel acklight cable All information is subject to change without notice. Please confirm the sales representation before starting to design your system - 4 -
SUNFUL DIITAL TECHNOLOY LIMITED. www.sunful-tft.com Application Schematic Diagrams All information is subject to change without notice. Please confirm the sales representation before starting to design your system - 5 -
SUNFUL DIITAL TECHNOLOY LIMITED. www.sunful-tft.com Electronic Characteristics (CN2) Pin Symbol I/O Conditions Min Typ Max Unit 5 Video I PAL or NTSC 1 V 1 V in I DC( + ) 10 12 14 V I in P in DC ( +12V ) 400 4.8 ma W 6 Vo Io O DC ( + ) 5 20 V ma 7 I DC ( + ) 2.1 2.3 2.5 V right() 8 Contrast I DC ( + ) 2.1 2.3 2.5 V 9 Color I DC ( + ) 1.3 1.5 1.7 V 10 Tint I DC ( + ) 1.7 1.8 1.9 V Other V Default Voltage Pin Symbol I/O Conditions Min Typ Max Unit 1 T I DC( + ) 2.1 2.3 2.5 V 2 PIC I DC( + ) 1.3 1.5 1.7 V Input / Output Connector 1.) CN2: Power & Video Input Connector Pin No. : 14, Pitch : 1.25 mm, Molex 53398-1410 or compatibility 2.) CN3: Input Connector Pin No. : 9, Pitch : 1.25 mm, Molex 53398-0910 or compatibility 3.) CN1: LCD Signal Output Connector FPC Down Connector, 30 Pins, Pitch : 0.5 mm 4.) CNH1: acklight High Voltage Connector Pin No. : 2, Pitch : 3.5 mm JST HS-02VS-1or compatibility All information is subject to change without notice. Please confirm the sales representation before starting to design your system - 6 -
SUNFUL DIITAL TECHNOLOY LIMITED. www.sunful-tft.com Connector Pin Definition CN2 pin definition No. Pin Name I/O Pin description emark 1 Vin I +12V power input 2 ND I Power ground 3 ND I Power ground 4 ND I Video signal ground 5 Video I Composite video signal input 6 +5V O For pin7/8/9/10 control purpose 7 rightness I rightness control voltage input 8 Contrast I Contrast control voltage input 9 Color I Color control voltage input 10 Tint I Tint control voltage input 11 N.C. NC No connection everse 12 /L I Picture left/right inverse control NOTE 1 13 U/D I Picture up/down inverse control NOTE 2 14 DIMME I Dimmer (Default Low) CN3 pin definition No. Pin Name I/O Pin description emark 1 in I ed signal input 2 in I reen signal input 3 in I lue signal input 4 SW I Switch (Video/ Select) NOTE 3 5 SYNC IN I SYNC Input 6 SYNC OUT O SYNC Output 7 /HSYNC OUT O everse HSYNC Output 8 /VSYNC OUT O everse VSYNC Output 9 ND I Power round (1) CNH1 pin definition No. Pin Name I/O 1 HV O Lamp driving terminal (high voltage) 2 LV O Lamp driving terminal (low voltage) emark (2) CN1 pin definition Meet PW045XS series input definition Note 1: /L = Hi (+5V) for shift right, Low (ND) for shift left Note 2: U/D = Hi (+5V) for down, Low (ND) for up Note 3: VIDEO = Low, High (+5v) for INPUT All information is subject to change without notice. Please confirm the sales representation before starting to design your system - 7 -
Default states: 1) Support video signal input 2) support right Contrast Color and Tint adjustable 3) Composite Sync input and could switch to input SUNFUL DIITAL TECHNOLOY LIMITED. www.sunful-tft.com 4) Support OSD input mode ( input and HSY/VSY output) If need support S-video input, the followed operation is needed: 1) Open 82 (1K ohm resistor) 2) Solder 83 (75ohm resistor) 3) Solder C68 (0.1uF capacitor) 4) Open 84 (0ohm resistor) If the analog video signal is, the composite synchronization signal is needed. Outline Dimension Description: Outline: 110.0*80.0*10.1mm Top Layer High (Max): 8.5mm oard thickness: 1.6mm 6 Screws: M3.0 Weight: 0.05kg All information is subject to change without notice. Please confirm the sales representation before starting to design your system - 8 -