Important Safety Instructions Explanation of WARNING symbols Safety instructions The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of not isolated dangerous voltage within the inside of the product that may be sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Important Safety Instructions 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15) Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, shall not be placed on the apparatus. 16) The Shock Hazard Marking and Associated Graphical Symbol is provided on the better panel of unit. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Operation Instructions Thank you for purchasing multi-scan color LCD-TV. Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This LCD TV has been tested and found compliant with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide proper protection against harmful interference to a residential installation. This LCD TV generates, uses, and can radiate radio frequency energy. Harmful interference to radio communication may be led as a result if it s not properly installed and used. However, there is no guarantee that interference will not occur in a particular installation. If this LCD TV does cause serious interference to radio or television reception, resetting the LCD TV may determine it. Moreover, users are encouraged to correct interference by doing one or more of the following: Reorient or relocate the receiving antenna. Move the LCD TV and the receiver further away from each other. Connect the LCD TV into an outlet on a circuit different from that to which the receiver is connected. Consult your local dealer or an qualified technician. FCC Warning: To assure a continued FCC compliance, a user must use a grounded power supply cord and the provided shielded video interface cable with bonded ferrite cores. Also, any unauthorized changes or modifications to this LCD TV would void the user s authority to operate this device. Note: If necessary, shielded interface cables and AC power cord must be used to meet the emission level limits. EMI Certification: The Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulation. Cet appareil numerique de class B respecte toutes les exigences du Reglement sur le materiel brouilleur du Canada.
Content Fisrt Setup... 5 Front Panel Control... 6 Installation... 7 Remote Control... 8 How to uninstall the stand...9 Using the OSD functions... 10 -TV mode... 10 -Video (Include-YCbCr, AV)...14 TV-Frequency table...16 Technical Information...18 Safety Precaution...19 Care and Maintenance...20
First Step Thank you for purchasing this LCD TV of high performance! This LCD TV package comes with: Power Cable User Guide book Remote control 29 key AV Video cable Quick Installation 1. Connector TV ANTANA or CATV Cable or Connect video cable Make sure the LCD TV are powered OFF. Connect to TV antenna jack or CATV box by 75-ohm coaxial cable. 5. In TV mode you can auto scan TV channel from OSD indicat (page 10.) 2. Connect Power Cord Connect the power cord to a properly grounded AC outlet, then to the LCD TV. 3. Power-ON LCD TV Power-ON the LCD TV. 4. Setting input source for LCD- TV from source of remote, or OSD menu.
Front Panel Control 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 Volume Down or adjust decaease Volume Up or adjust increase Menu Key OSD ON/OFF Scroll Down Scroll UP Enter Power LED indicator Power ON/OFF switch Remote control receiver
Installation E F G H A B C D A B C D E F G H Power input (AC input) Audio output (left/right) CVBS / S-Video Audio input (left/right) YCbCr-Audio input (left/right) TV signal input S-Video input AV Video input YCbCr signal input
Remote Control Switch TV or CATV Source select Mute ON/OFF Volume UP/DOWN adjust TV Sleep time setting Power ON/OFF Source and channel display MTS Select Channel UP/DOWN adjust Function UP/DOWN Select and Left/Right adjust OSD Menu ON/ OFF Enter Switch channel number key Return to previous channel
How to uninstall the stand (for wall-mounting the LCD TV) Fig.1 Fig.2 Fig.3 Fig.4 Fig.5 Fig.6 1. Pave a piece of fabric on the table, and lay the TV flat on the table with the front face down (see Fig.1). 2. Press the two concave portions with both your thumbs (see Fig.2). 3. Pull the pivot cover to yourself to detach the cover from the back panel of the TV (see Fig.3). 4. Remove the pivot cover (see Fig.4). 5. Unscrew the four setscrews (see Fig.5). 6. Remove the stand from the TV (see Fig.6).
Using the OSD Functions Press menu key to display OSD Menu, and press menu key again to change menu page. TV mode Picture Menu: This submenu can to adjust Contrast, Brightness, Color, Tint and sharpness. Contrast: To adjust the contrast of the video. (right: Max, left: Iow) Brightness: To adjust the Luminance of the Video. (right: Max, left: Iow) Color: To adjust color saturation. (right: brilliant color, left: pale color) Tint: To adjust the tint level. (right: greenish tone, left: reddish tone) Sharpness: To adjust the picture sharpness of display. Sound Menu: This submenu can to adjust, Balance, Bass, Treble, and to Audio Out Off/On.
Using the OSD Functions Balance: To adjust the left and right audio balance. Bass: To adjust the bass. Treble: To adjust the treble. Audio Out: To adjust the Audio Out Off/On. Option Menu: This submenu can set Caption (CC1, CC2, T1, T2) and Source Select (AV, S-Video, YCbCr, TV) Input: To select the input source (AV, S-Video, YCbCr, TV). Memory Recall: Recall factory setting condition, about video & Audio setting. Setup Menu: TV/CATV SELECT: To select TV signal input is TV, CATV, HRC,and IRC. AutoScan: To autoscan the TV channel (TV or CATV). Channel: Add or delete TV channel. Parent Control: To set V-Chip condition and password.
Using the OSD Functions V-Chip setting: To enable V-Chip functions please enter 0000 if you have not assigned the special password. Use remote control arrow keys to select V-chip blocking to set parental guidelines on or off. Select MPAA/TV rating to set rating grade. Use remote control arrow keys to move cursor to desire rating grade, when the text is Red, press enter key to set block or unblock condition. New PIN-code you can change the password. Use remote control to enter 4 digit number, then press enter.
Using the OSD Functions Use remote control numbering keys to confirm the number again, then press enter. V-Chip blocked: To enable V-Chip blocked please enter 0000 if you have not assigned the spical password.
Using the OSD Functions Press menu key to display OSD Menu. Video mode (Include-S-Video, YCbCr, AV) Picture Menu: This submenu can to adjust Contrast, Brightness, Color, Tint and sharpness. Contrast: To adjust the contrast level. (right: Max, left: Iow) Brightness: To adjust the brightness level. (right: Max, left: Iow) Color: To adjust color saturation. (right: brilliant color, left: pale color) Tint: To adjust tint level. (right: greenish tone, left: reddish tone) Sharpness: To adjust the picture sharpness of display. (right: sharper, left: soft) Sound Menu:
Using the OSD Functions This submenu can to adjust, Balance, Bass, Treble, and to Audio Out Off/On. Balance: To adjust the left and right audio balance. Bass: To adjust the bass. Treble: To adjust the treble. Audio Out: To adjust the Audio Out Off/On. Option Menu: This submenu can set Caption (CC1, CC2, T1, T2) and Source Select (AV, S-Video, YCbCr, TV) Input: To select the input source (AV, S-Video, YCbCr, TV). Memory Recall: Recall factory setting condition, about video & Audio setting.
U.S.A Channel TV Frequency Table
TV Frequency Table
Technical Specification Technical Information LCD Panel Displayable Resolution Pixel Dimension LCD Display Color Viewing Angle Tilt Contrast Ratio Brightness Response Time Active Display Area Temperature Compliance Power Speaker 13" TFT 640(H) x 480(V) 0.4125 x 0.4125 mm 16.7M (8 bits/color) 170/155, CR > = 5 O +20, -5 O 500 : 1 (typical), (Video-typical) 450 cd /m 2 (typical) 15 ms. Max.(Gray Scale Level) 264 mm x 198 mm O O Operating: 0 C ~ +40 C O O Storage: -20 C ~ +60 C UL, FCC-B Voltage 100-240 V 2.5 W x 2
Safety Precautions This LCD TV is manufactured and tested on a ground principle that a user s safety comes first. However, improper use or installation may result danger to the LCD TV as well as to the user. Carefully go over the following WARNINGS before installation and keep this guide handy. WARNINGS: This LCD TV should be operated only at the correct power sources indicated on the label on the rear end of the LCD TV. If you re unsure of the power supply in your residence, consult your local dealer or power company. Do not try to repair the LCD TV yourself as it contains no userserviceable parts. The LCD TV should only be repaired by a qualified technician. Do not remove the LCD TV cabinet. There is high-voltage parts inside that may cause electric shock to human bodies, even whenthe power cord is disconnected. Stop using the LCD TV if the cabinet is damaged. Have it checked by a service technician. Put your LCD TV only in a clean, dry environment. Unplug the LCD TV immediately if gets wet and consult your service technician. Always unplug the LCD TV before cleaning it. Clean the cabinet with a clean, dry cloth. Apply non-ammonia based cleaner onto the cloth, not directly onto the glass screen. Keep the LCD TV away from magnetic objects, motors, TV sets, and transformer. Do not place heavy objects on the cable or power cord. For PLUGGABLE EQUIPMENT, the Socket-outlet shall be installed near the equipment and shall be easily accessible.
Care Care and Maintenance Avoid exposing your LCD TV directly to sunlight or other heat source. Place your LCD TV away from the sun to reduce glare. Put your LCD TV in a well ventilated area. Do not place anything heavy on top of your LCD TV. Make certain your LCD TV is installed in a clean and moisture-free area. Keep your LCD TV away from magnets, motors, transformers, speakers,and TV sets. Safety Tips If smoke, abnormal noise or odor came out of your LCD TV, switch off the power immediately and call your service center. Never remove the rear cover of your LCD TV cabinet. The display unit inside contains high-voltage parts and may cause electric shock to human bodies. Never try to repair your LCD TV yourself. Always call your service center or a qualified technician to fix it.
V INCORPORATED LIMITED WARRANTY For VIZIO LCD Displays Welcome to the V, Inc. Digital Family! Please read this warranty carefully, it is a ONE-YEAR LIMITED WARRANTY on parts and labor. V, Inc. s Responsibility V, Inc. LCD Displays purchased in the United States are warranted to be free from defects in materials or workmanship for a period of one (1) year from the date of their original retail purchase. If the unit fails to conform to this warranty, we will service the monitor using new or refurbished parts. Service Labor During a period of one year from the effective warranty date, V, Inc. will provide, when needed, service labor to repair a manufacturing defect at its designated Service Center. To obtain warranty service in the Untied States, you must first call our Customer Support at (714) 668-0588, 9:00am-5pm PST. The determination of service will be made by V, Inc. Customer Support.. PLEASE DO NOT RETURN YOUR UNIT TO V, INC. WITHOUT PRIOR AUTHORIZATION. Parts New or remanufactured replacements for defective parts will be used for repairs by V, Inc. at its designated Service Center for one (1) year from the effective warranty date. Such replacement parts are warranted for the remaining portion of the original warranty period. Service During the one (1) year warranty period, V, Inc. will, at its option and sole discretion, repair or replace defective parts, including replacement of the entire LCD Panel. The Customer will be required to ship the unit to the Service Center indicated at the time Customer Support is contacted to make the necessary repairs. You are responsible for all transportation charges to and from the service facility. V, Inc. is not responsible for the de-installation or re-installation of the unit. Packaging and Shipping Instructions When you send the product to an authorized V, Inc. service facility you must use the original carton box and packing material or an equivalent as approved by V, Inc. Not Covered This warranty does not cover defects, malfunctions or failures resulting from shipping or transit accidents, abuse, misuse, operation contrary to furnished instructions, operation on incorrect power supplies, operation with faulty associated equipment, modification, alteration, improper servicing, tampering or normal wear and tear or TVs on which the serial number has been removed or defaced. Image Sticking caused by operating at excessive brightness levels for extended periods or mishandling are not covered by this warranty. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. OUR LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER, INCLUDING OUR NEGLIGENCE, ALLEGED DAMAGE OR DEFECTIVE GOODS, WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE DISPLAY. WE SHALL NOT BE RESPONSIBLE FOR LOSS OF USE, COMMERCIAL LOSS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This is the only warranty applicable; no one is authorized to extend or modify it or to grant any other warranty. V, Inc. retains the right to assess all warranty claims and to determine if damages are covered by the warranty. In case of a claim that is not covered by the warranty, you will be contacted to determine whether V, Inc. should repair the damage for a fee or whether the product should be returned to you as received by the repair center. Owner s Responsibility Effective Warranty Date Warranty begins on the date of sale to the end user. To ensure warranty service, keep the dated bill or sale receipt as evidence of the purchase date. User Manual Read your User Manual carefully so that you will understand the operation of your LCD Display and how to adjust the user controls. Warranty Service For warranty service information, contact V, Inc. Customer Support at (714) 668-0588, 9:00am-5pm PST. Parts and service labor that are V, Inc. s responsibility (see above) will be provided without charge. Other service is at the owner s expense. You must provide the model, serial number and date of purchase. Before you ask for warranty service, read your User Manual. You might avoid a service call. For Technical Support, visit WWW.VINC.COM, Call (714) 668.0588 or E-mail Techsupp@vinc.com