Wide Area Lighting - Rough Service Fluorescent 1100 and 1200 Series Wide Area Lighting These portable overhead lights have been engineered to meet the need for safe, temporary, economical lighting for large area. Their versatility provides for base unit and feed-through unit use to meet virtually any wide area lighting requirement. Heavy-duty construction and high lumen output make these lights ideal for a broad range of applications including manufacturing plants, airline maintenance hangers, ship building, food processing plants, utilities, breweries, general maintenance and construction plus many more. The 1100 Series uses high output T8 fluorescent tubes while the 1200 Series uses long-life biaxial tubes for a smaller unit where space is major concern. Overhead fluorescent lighting designed for temporary lighting in large areas Variety of models available including feed-through units that allows you to daisy-chain several lights in a row Heavy-duty construction and high lumen output Lower operating costs versus incandescent lighting means savings for you Industry proven cord grip provides strain relief and seals out water, dust and other jobsite contaminants Safety yellow and blue for easy identification Rapid start lamps and electronic ballast (1140 is multivoltage) Impact resistant tube-shield Moisture and dust resistant construction seals out contaminants One inch wide nylon straps serve as heavy duty hangers and are flexible and adjustable Each hanger comes with nickel-plated heavy hooks for corrosion resistance Compact Size! Feed-thru unit available on both styles NEW! MULTIVOLTAGE Automatically Operates at 120 to 277 VAC 50 or 60 Hz *1142 only Hanging strap included 1239-4F Model Number Electrical Ratings Primary Secondary Cord Cord Length (ft) Length (ft) Primary Plug (NEMA) Secondary Connector (NEMA) Bulb Type Weight (lbs) Lumens CRI 1140 Series 1140-4 120V* 60Hz 4 n/a 5-15 -- T8 32W 6000 86 14 1140-4F 120V* 60Hz 4 1 5-15 5-15 T8 32W 6000 86 14.5 1140-25 120V* 60Hz 25 n/a 5-15 -- T8 32W 6000 86 18 1140-25F 120V* 60Hz 25 1 5-15 5-15 T8 32W 6000 86 18.5 1140-50 120V* 60Hz 50 n/a 5-15 -- T8 32W 6000 86 20 1140-50F 120V* 60Hz 50 1 5-15 5-15 T8 32W 6000 86 20.5 1142-25 120 to 277V* 50/60 Hz 25 n/a (1) (1) T8 32W 6000 86 18 1142-25F 120 to 277V* 50/60 Hz 25 1 (1) (1) T8 32W 6000 86 18.5 Current Draw:.46 @ 120V.2Amp @ 277V 1239 Series 1239-4 120V* 60Hz 4 n/a 5-15 -- F39BX 5700 86 8 1239-4F 120V* 60Hz 4 1 5-15 5-15 F39BX 5700 86 8.5 1239-25 120V* 60Hz 25 n/a 5-15 -- F39BX 5700 86 11 1239-25F 120V* 60Hz 25 1 5-15 5-15 F39BX 5700 86 11.5 1239-50 120V* 60Hz 50 n/a 5-15 -- F39BX 5700 86 14 1239-50F 120V* 60Hz 50 1 5-15 5-15 F39BX 5700 86 14.5 * The electronic ballast in the 1140/1142 series automatically adjusts to any voltage level within the range 120 to 277 Volts. (1) shipped without the plug and connector 300V SJOW hard use cord with Ericson plug installed 4 feet of bright work light! Heavy duty rubber ends protect against impact Tube shield protects lamp and difusses light Dual T8 high output Lamps Internal all metal construction New electronic ballast operates 120 to 277V (auto) Super bright lamps Low temperature Superior sealing against lens Bulbs held securely to withstand shock 1140-25 Base unit 105 1-800-ERICSON (374-2766) www.ericson.com
Wide Area Lighting - High Pressure Sodium 1000 Series High Pressure Sodium Wide Area Magnet Mount Light For the ultimate in durability, choose from Ericson s Premier line of High Pressure Sodium Lighting Fixtures. Choose from a variety of standard models or specify a custom fixture to meet your exact requirements. UL listed and CSA certified Impact-resistant molded polycarbonate housing Impact-resistant, high temperature clear lens Blondel Prisms on inner surface to provide optimum light diffusion Available with a 70 watt high-pressure-sodium Dual magnets for secure mounting on metal surfaces Integral eye-hook for overhead mounting #14/3 SOW cord supplied standard HPS model available with optional receptacle, GFCI or both Supplied with 70W lamp Dual Magnet Mounting System for mounting on metal surfaces 1 1000 Series HPS Wide Area Optional GFCI protected receptacle with Perma-Tite Flip-Seal Cover With Non- GFCI Side Receptacle With Side Receptacle with GFCI Class A Open Neutral Protection (3) Model Voltage Cord Length Location Rating 1000 120/ 60 Hz 6 Wet n/a n/a 1000-25 120/ 60 Hz 25 Wet n/a n/a 1000-50 120/ 60 Hz 50 Wet n/a n/a 1000-R 120/ 60 Hz 6 Dry Installed n/a 1000-R25 120/ 60 Hz 25 Dry Installed n/a 1000-R50 120/ 60 Hz 50 Dry Installed n/a 1000-RG 120/ 60 Hz 6 Wet n/a Installed 1000-RG25 120/ 60 Hz 25 Wet n/a Installed 1000-RG50 120/ 60 Hz 50 Wet n/a Installed Specifications: Cord: #14/3 SOW or Equiv Plug: Nema 5-15P (1510-P) Lamp: 70 Watt HPS Clear Bulb: B17 shape med base CRI: 22 Lumens: 6400 K Temp: 1900 Avg Life Hrs: 24,000 (1)Use chain or cable if mounted overhead Large hang hook Non-metallic enclosure Fully prism difused lens FS style flip cover Lens cover 1000-LRK Inside view 70 Watt HPS Replacement Parts Lens & gasket 1000-LRK Magnet 1000-MAG Ballast & ingniter 1000-Bal Replacement bulb 1010 Available with or without Receptacle and Ground Fault Circuit Interrupter Versatile Energy Efficient 107 1-800-ERICSON (374-2766) www.ericson.com
Wide Area Lighting - Fluorescent 1000 Series Fluorescent Wide Magnet Mount Light Ericson s field-proven 1000 Series wide area lighting fixtures are now available with energy-saving high-cri, high-color temperature fluorescent lamps. Available in 120VAC Impact-resistant molded polycarbonate housing Impact-resistant, high temperature clear lens with Blondel Prisms on inner surface to provide optimum light diffusion Dual magnets for secure mounting on metal surfaces Integral eye-hook for overhead mounting #14/3 SOW cord supplied standard Supplied with (3) 26W T4 Quad fluorescent bulbs Large hang hook 3 x 13 Watt super bright bulbs Light weight design 3 separate ballast/bulb light systems in each lamp provides triple redundant light for emergency operations Available with a variety of options: (1) Switch Receptacle GFCI Non-metallic enclosure Optional Receptacle with Perma-Tite Flip-Seal Cover 3 separate 13W lamp/ballast circuits Bulb cushion Dual magnets Energy efficient CFL technology Inside view Cushion protects lamps 1000F Series Wide Area Light Model Voltage Cord Length Location Rating With Non-GFCI Side Receptacle 1000F 120/ 60 Hz 6 Wet n/a 1000F-25 120/ 60 Hz 25 Wet n/a 1000F-50 120/ 60 Hz 50 Wet n/a 1000F-R 120/ 60 Hz 6 Dry Installed 1000F-R25 120/ 60 Hz 25 Dry Installed 1000F-R50 120/ 60 Hz 50 Dry Installed Specifications: Cord: #14/3 SOW or Equiv Plug: Nema 5-15P (1510-P) Lamp: 3 x 13 watt Quad GX23T4 CFL CRI: 82 Lumens: 900 x 3 = 2700 K Temp: 5000K Avg Life Hrs: 10,000 Low Temp Start: 10 Deg F MANY ERICSON PRODUCTS ARE LISTED OR CERTIFIED. FOR THE LATEST FULL SEARCHABLE LISTING BY PART NUMBER, GO TO: WWW.ERICSON.COM/AGENCY Note: Products shown on this page may not be listed. 108
Magnet Mount Work Lighting EZ Series Is The Economical Alternative To Expensive Fixtures Choose either the 70Watt High Pressure Sodium or the 70Watt Metal Halide version and go it s that easy. Prism lens SUPER STRONG MAGNET Large 6 magnet Strong cast body WET LOCATION RATED Available with High Pressure Sodium or Metal Halide Lamp-Choice of light source that is right for you Metal Halide Lamp-Provides bright, white light for color-rendering applications High Pressure Sodium Lamp-Long-life for extended lighting applications UL & cul Listed-Assurance of quality by independent testing agency-safety, performance and reduced downtime Die-cast aluminum housing-lightweight, rugged dependability in demanding environments combined with excellent surface finish 6ft. #14/3 oil-resistant cable with molded-on 5-15 plug-resists jobsite oils with out deterioration Heavy-duty magnet-secure mounting on metal surfaces for hands-free operation (1) Built-in carry handle with integral eye -Provides for overhead mounting and easy-carry, even when wearing work gloves Impact resistant, high-temperature lens with inner surface prisms for optimum light diffusion EZ Series Metal Halide and HPS Fixtures Selection Guide Metal Halide (1) High Pressure Sodium (1) 70 Watt 70 Watt 6 ft. Cord 1000-MH 1003-HPS Specifications Electrical Ratings 120V/60Hz 120V/60Hz Environmental Rating WET LOCATION WET LOCATION Cord Gauge/Type #14/3 SJTOW #14/3 SJTOW Plug Type Bulb Type 70W MH/E26/ED/Clear 70W HPS/E26/ED/Clear Avg. Rated Bulb Life 8000 hr. 16000 hr. Initial Lumens 5500 5160 Color Rendition Index (CRI) (2) 65 <40 Color Temperature (K) (3) 4000K 2100K Low Temp Start -20 C -20 C Replacement Parts Lens 1000-MH-LENS 1000-MH-LENS Handle 1000-HAN 1000-HAN Bulb 1010-MH (70W MH) 1010 (70W HPS) Magnet 1000-MH-MAG 1000-MH-MAG Notes: 1. Use secondary safety chain or cable if mounted overhead 2. Based on a scale from 1 to 100 where 100 represents sunlight. The higher the number the truer the color appears 3. Sunlight is simulated with a light that is about 5000 K. The higher the number the whiter the light MANY ERICSON PRODUCTS ARE LISTED OR CERTIFIED. FOR THE LATEST FULL SEARCHABLE LISTING BY PART NUMBER, GO TO: WWW.ERICSON.COM/AGENCY Note: Products shown on this page may not be listed. 110
Heavy Duty Tube Fluorescent Work Lights 800 Series Work Lights - T8 Tube These portable work lights are designed to meet the need for safe, temporary, economical task lighting. Their versatility provides for base and feed-thru units to meet a variety of lighting applications: Tent Lighting Tunnel Lighting Work Shop Lighting Task Lighting And More Variety-Available in different wattages and as a base or feed-thru unit that can be "daisy-chained" to cover larger areas. OSHA Compliant - Meets OSHA regulations for wet and other conductive locations. Outdoor Use-Fixture is rated NEMA TYPE 4X for demanding outdoor and in-plant environments. Cool, glare-free light-ideal for those applications where hot, glaring light can be a hazard. Rubberized Handle-Non-conductive, non-corrosive and easy to grip. Flex Strain Relief-Provides added protection for cord at critical bending points. High Visibility-Dual Color safety system for easy identification on the jobsite. Lightweight-Construction with impact resistant tube shield. Ballast-Enclosed in handle, so it's easy to move around the jobsite. Switch(optional) - Heavy duty rubber boot, push on/off operation, seals out water. 840 Series - 40 watt high output Ballast In Handle Feed-thru option 832 Series - 32 watt (miser 40w) Low Temp Rating 0º F 825 Series - 25 watt 817 Series - 17 watt Series L 817 25.25 825 43.25 832 55.0 840 66.50 ø1.50 6.09 2.20 Feed-Thru 111 1-800-ERICSON (374-2766) www.ericson.com
Heavy Duty Tube Fluorescent Work Lights 800 Series Work Lights Selection Guide 17 Watts 25 Watts 32 Watts 40 Watts Base Units with 25 ft. cord 817-25 825-25 832-25 840-25 with 50 ft. cord 817-50 825-50 832-50 840-50 Feed-Thru Units with 25 ft. cord 817-25F 825-25F 832-25F 840-25F with 50 ft. cord 817-50F 825-50F 832-50F 840-50F Specifications Electrical Ratings 120V, 60Hz 120V, 60Hz 120V, 60Hz 120V, 60Hz Amperage Draw 0.25A 0.35A 0.43A 0.48A Primary Cord Length 25 ft. 25 ft. 25 ft. 25 ft. Secondary Cord Length (Feed-Thru Units Only) 10 in. 10 in. 10 in. 10 in. Max Units Connected(Applies to Feed-Thru Models Only) (2) 12 12 12 12 Ballast Location Handle Handle Handle Handle NEMA TYPE Rating 4X 4X 4X 4X Cable Gauge/Type (Base Units Only) #16/3 SOOW #16/3 SOOW #16/3 SOOW #16/3 SOOW Cable Gauge/Type (Feed-Thru Units Only) #14/3 SJOW #14/3 SJOW #14/3 SJOW #14/3 SJOW Plug(Base units equipped with molded PW6P feed thru) Connector (Feed-Thru Units Only) Bulb Type F17T8SPX41 F25T8SPX41 F32T8SPX41 F40T8SPX41 Initial Lumens 1325 2150 2950 3725 Color Rendition Index (CRI) (3) 86 86 86 84 Color Temperature (K) (4) 4100 4100 4100 4100 Avg. Rated Bulb Life (Hours) 20000 20000 20000 20000 Low Temp Start 0 F 0 F 0 F 0 F Fixture Weight 3.2 lb 3.8 lb 4.2 lb 4.6 lb Notes: 1. Consult factory for custom assemblies, add S to end of catalog number for switch 2. Based on nominal primary length of 25ft. and secondary length of 10in. with #16/3 cable operating from a single 15A supply receptacle 3. Based on a scale from 1 to 100 where 100 represents sunlight. The higher the number the truer the color appears 4. Sunlight is simulated with a light that is about 5000 K. The higher the number the whiter the light Connect up to 12 Units Together To Light Your Jobsite. Great For: Tunnels Construction Site Scaffolding Walkways Tents Portable Shelters And much more... MANY ERICSON PRODUCTS ARE LISTED OR CERTIFIED. FOR THE LATEST FULL SEARCHABLE LISTING BY PART NUMBER, GO TO: WWW.ERICSON.COM/AGENCY Note: Products shown on this page may not be listed. 112