Options for s and Stitchers Options Options for s and Stitchers s Stitchers Various options are available to handle wide range of applications.
Tandem Stacker ST-60 Tandem Stacker Connectable s -1000, -600H -100, -60H SAC-150 Air-Suction -1000 (20 bins) Paper Jogger for Right Side Delivery PJ-77R The twin-tray design delivers 8,000 sets per hour as neatly jogged off-set stacks. When one stack tray becomes full, thesets automatically route to the other stack tray, with no system slowdown. Tandem Stacker ST-60 Errored sets are delivered to the built-in reject tray for non-stop operation. A continuously cycling tail jog keeps all sheets well positioned for superior stack quality. Reject Tray Tandem Pallet Tandem Stacker ST-60 Friction SAC-150 (60 bins) Bypass Stacker Air-Suction -1000 (20 bins) Connectable s -1000, -600H -100, -60H SAC-150, SPF-200L, SPF-20, Bypass Stacker Paper Jogger for Right Side Delivery PJ-77R Connected between the collating and bookletmaking systems, the serves as a high-capacity offset or straight stacking device. Errored sets are delivered to the built-in reject tray for non-stop operation. A continuously cycling tail jog keeps all sheets well positioned for superior stack quality. Hole Punch Unit HP-200A Bypass Stacker Air-Suction -600H (12 bins) Fore-edge Trimmer Bookletmaker Sub Accumulator SA-40 Paper Jogger for Right Side Delivery PJ-77R
CCR / CCR-DX Criss-Cross Receiving Tray The criss-cross receiving tray swings 90 degrees at each collating interval, clearly separating collated sets to simply post-collating processes. This is also suitable for piling sets onto previously collated sets. ST-20 Stacker Receiving Tray The stacker receiving tray shifts each collated set laterally, separating the collated sets. When an empty pallet is presented, the stacker rises to its home position to start collating. PJ-77 Paper Jogger Driven by an independent motor, the paper jogger vibrates collated sheets into perfect alignment. The jogger tray rises automatically by a foot switch to start collating. ST-20R Stacker Receiving Tray for Right Side Delivery PJ-77R Paper Jogger for Right Side Delivery The stacker receiving tray shifts each collated set delivered on the right side laterally. The paper jogger vibrates collated sheets delivered on the right side into perfect alignment. SA-40 Sub Accumulator Connectable s Connectable Stacker Stitcher -1000, -600H -100, -60H SAC-150 SA-40 The SA-40 sub accumulator temporarily accumulates the sheets delivered from the collator and stabilizes the sheet jog for the stitcher for quality bookletmaking. Also the SA- 40 improves the sheet jog for the bypass stacker. Using the accumulating mode on the SA-40, every misfed sheets can be ejected. Sheet delivery angle, bulging nose, assist air, stopper plate, and jog waiting time are adjustable for running the various type of paper. Sheet Flow from to SA-40/ Bypass Stacker Sub Accumulator SA-40 Saddle-stitching System Air-Suction -1000 (40 bins)
BC-20 Bypass Conveyor Bypass Conveyor BC-20 Connectable s -1000, -600H -100, -60H, SPF-200L, SPF-20, The BC-20 can be connected with the collators, stitchers, and receiving trays (CCR / CCR-DX) all together. The BC-20 switches over from bookletmaking to stacking with simple push of a button. The built-in rejecting tray is equipped for non-stop collation. Sheet jam detection is provided. And the LED shows the location of jam. The BC-20 is equipped with hand feeding function as standard. Connectable Receiving Tray CCR / CCR-DX Saddle-stitching System Criss-Cross Receiving Tray CCR / CCR-DX Air-Suction -1000 (40 bins) IC-600H Image Checking System -600H Connectable s Running the memory function, the printed image of each page is scanned and stored automatically. A scanning position can be changed on the touchscreen. The image checking system installed in each bin scans all pages and checks paging disorder. The system can detect differences in color. Horizon s unique CMOS camera is housed in a trans- Using the show-through reduction mode, the image checking system can check thin sheets. The camera does not see images on the back. Image Storing Determination mode, sensitivity, size, imaging timing, color check mode, and show-through reduction mode are setup with each bin. A position to scan image is adjustable. Paging Disorder Checking The monitor shows six-level of image matching result on each page. When unmatching level become level 5, the CCD- determines paging disorder and collation stops. The CMOS camera is housed in a transporting section of the collator for Longer lasting high intesity white LEDs are employed for capturing image precisely. CMOS camera Air-Suction -600H (12 bins)
IM-30 Paper Inserter Saddle-stitching System, SPF-200L, Paper Inserter IM-30 Bypass Stacker Sheet insertion can be performed in-line with the Stitcher with minimal operator involvement. Maximum production speed is 4,000 booklets per hour with the StitchLiner or 3,600 booklets per hour with the. Faulty set eject function is employed for non-stop operation even when a feed error occurs. Intuitive touchscreen control and quality checking systems (Feed section error sensor, Separation error sen- with minimal errors. Air-Suction -1000 (20 bins) Increase production capabilities with a wide range of inserting applications. Up to three sheets can be inserted into the middle of a booklet or beneath the top sheet Vacuum rotary suction feed system enables the feeding of a wide range of sheets, including Beneath Top Sheet Middle of Booklet single sheets, hole punched sheets, post cards and folded sheets. Maximum bin stack height is 125 mm (4.9 ). With the inline mode, the IM-30 synchronizes the insertion timing automatically with the bookletmaker. *IM-CC Conveyor is required for connection to the. Post Card Hole Punched Sheet Single Sheet (Up to 3 sheets) Folded Sheet With the manual feed mode, the system cycles each time the booklet is fed into the infeeder; the operator can control the speed of insertion and production. Bookletmaking without insertion is possible without removing the IM-30 Image Checking System IC-600H Connecting Conveyor IM-CC Paper Inserter IM-30 Fore-edge Trimmer Bookletmaker Air-Suction -600H (12 bins) IM-30 Options Connecting Conveyor IM-CC Bypass Conveyor IM-BC Insert Error Detector IM-SD Compressor CMP-04 Preset Kicker PK-30 HP-200A Hole Punch Unit Air-Suction -1000 (20 bins), SPF-200L Hole Punch Unit HP-200A letmaking in-line with the. Necessary settings and operation can be performed automatically by inputting the sheet size in the color touchscreen on the. Changeover for 2 holes and 4 holes is easy for user-friendly operation. High speed hole punching can be performed without effect on *the production speed of the. Hole punch, press and through modes can be se- *Production speed changes depending on the binding mode, booklet thickness and sheet condition. Fore-edge Trimmer Bookletmaker The top-bottom transport belt insures stable booklet transportation. Blower air at fore-edge jog section is equipped as a standard for more accurate and stable production.
HOF-400 High Speed Off-line Feeder, SPF-200L, SPF-20, The HOF-400 can feed at a speed of 25,000 sheets per hour (A3 / 11 x 17 ) and 35,000 sheets per hour (A4 SEF/ 8.5 x 11 ). This high speed feeding is capable of handling the output of multiple printers. Feature rich newly designed 7 color touch screen display for easy and intuitive operation. Accumulator AC-400 Cover Feeder CF-400 The HOF-400 is compatible with a wide variety of system cumulating, bleed trimming and center creasing depending on your needs. Fore-edge Trimmer Bookletmaker High Speed Off-line Feeder HOF-400 Saddle-stitching System Cover Feeder CF-400 The HOF-400 is equipped with a high quality feed detection system for reliable processing. If a mis-feeding occurs in the HOF-400, the system stops before stitching. Ultrasonic Sensor: Miss-feed, double-feed or jam detection Mark sensor: Page order detection (top and last sheet) Accumulator AC-400 High Speed Off-line Feeder HOF-400 HOF-30 High Speed Off-line Feeder, SPF-200L, SPF-20, High Speed Off-line Feeder HOF-30 Air-Suction -1000 (20 bins) The system feeds at a speed of 27,000 sheets/hr., using- Horizon s patented rotary suction feeding system. Maximum pile height is 430 mm (16.9 ) on the sheet feed feeding are provided as standard equipment, so one set is always available for pre-loading. When connected with collators, the HOF-30 is a printing. For digital work, the HOF-30 is a high-speed sheet feeder while the collator provides cover inserting. When the collator is feeding offset work, the HOF-30 serves as a bypass conveyor and reject tray for non-stop production. The HOF-30 has the capability to handle variable data applications. A mark sensor enables the HOF-30 to handle variable sheet count documents with integrity and Accurate feed error detecting functions are equipped for reliable sheet feeding. Opacity sensor: Miss-feed, double-feed or jam detection Mark sensor: Page order detection (top and last sheet) CCD camera (Option): Image detection for the top sheetat the accumulating area. Fore-edge Trimmer Bookletmaker Paper Jogger for Right Side Delivery PJ-77R Saddle-stitching System High Speed Off-line Feeder HOF-30 Air-Suction -600H (24 bins)
Machine Dimensions Unit : mm (inch) IM-30+++ 652 25.7 Height 1,102 / 43.4 ST-60 652 25.7 Height 1,027 / 40.5 3,240 / 127.6 2,180 / 85.9 1,060 / 41.8 1,957 / 77.1 1,353 / 53.3 SPF-30S ACF-30 1,060 / 41.8 560 22.1 Height 480 / 18.9 Height 730 / 28.8 CCR CCR-DX 645 25.4 575 22.7 ST-20 ST-20R 590 23.3 ++IFU-200+ LC-200 FC-200L 400 15.8 Height 530 / 20.9 PJ-77 PJ-77R 480 18.9 Height 1,070 / 42.2 Height 1,250 / 49.3 Height 1,962 / 77.3 SPF-200L IFU-200 650 / 25.6 992 / 39.1 4,550 / 179.2 1,980 / 78.0 1,900 / 74.9 614 24.2 1,482 / 58.4 645 25.4 223 8.8 HTS-30S IM-30 2,500 / 98.5 Height 1,800 / 70.9 Conveyor 4,566 / 179.8 100 / 4.0 ST-CV (Tower a) (Tower m) (Tower m) 842 / 33.2 1,295 / 51.0 3,197 / 125.9 Height 1,962 / 77.3 4,817 / 189.7 670 / 26.4 : 665 : 1,625 / 64.0 26.2 SPF-200L : 1,856 / 73.1 1,210 / 47.7 FC-200L : 735 29.0 470 64.0 934 / 36.8 +++SA-40+ IM-30+IM-CC++++ LC-200 Height 1,070 / 42.2 Height 1,250 / 49.3 Height 1,027 / 40.5 Height 1,962 / 77.3 FC-200L SPF-200L SA-40 670 / 26.4 : 665 : 1,625 / 64.0 26.2 SPF-200L : 1,856 / 73.1 1,210 / 47.7 FC-200L : 735 1,558 / 61.4 934 / 36.8 29.0 650 / 25.6 992 / 39.1 2,330 / 91.8 1,100 / 43.4 IM-CC IM-30 419 16.5 Height 1,800 / 70.9 Height 1,070 / 42.2 Height 1,250 / 49.3 Height 1,027 / 40.5 Height 1,962 / 77.3 2,290 / 90.2 ST-CV 1,295 / 51.0 934 / 36.8 650 / 25.6 992 / 39.1 +HP-200A++BC-20+ Height 1,070 / 42.2 Height 1,035 / 40.8 Height 1,250 / 49.3 Height 920 / 36.3 Height 1,962 / 77.3 1,900 / 74.9 590 / 23.3 FC-200L HP-200A SPF-200L BC-20 650 / 25.6 992 / 39.1 +HOF-30+ 670 / 26.4 : 665 500 / 19.7 26.2 FC-200L : 735 29.0 : 1,625 / 64.0 SPF-200L : 1,856 / 73.1 1,240 / 48.9 934 / 36.8 3,240 / 127.6 2,180 / 85.9 1,060 / 41.8 / : 5,634 / 221.8 SPF-200L / FC-200L : 5,935 / 233.6 ++AC-400+CR+400+CF-400+HOF-400 860 / 33.9 400 15.8 SPF-30S ACF-30 1,060 / 41.8 670 / 26.4 : 665 26.2 FC-200L : 735 29.0 Height 1,070 / 42.2 Height 1,250 / 49.3 Height 910 / 35.9 Height 910 / 35.9 FC-200L SPF-200L : 1,625 / 64.0 SPF-200L : 1,856 / 73.1 AC-400 1,074 / 42.3 1,294 / 51.0 / : 6,733 / 265.1 SPF-200L / FC-200L : 7,034 / 276.9 CR-400 CV-400 270 175 / 6.9 10.7 Height 330 / 13.0 CF-400 HOF-400 CF-400 1,060 / 41.8 HOF-400 960 / 37.8 HOF-400+CF-400 1,230 / 48.5 Height 936 / 36.9 910 / 35.9 3,930 / 154.8 1,400 / 55.2 1,270 / 50.0 HTS-30S Conveyor Height 945 / 37.3 HOF-30 (Tower a) (Tower m) 1,460 / 57.5 3,362 / 132.4 4,172 / 164.3 842 / 33.2 Height 1,962 (77.3 )
Options for s and Stitchers Max. W350 x L500 mm / 13.8 x 19.7 Min. W182 x L128 mm / 7.2 x 5.0 Sheet Weight Range 52 to 208 gsm 2-tray: 8,000 sets per hour (A4 or 8.5 x 11 / 10 sheets / off-set stacked) Production Speed 1-tray: 5,000 sets per hour (A4 or 8.5 x 11 / 10 sheets / off-set stacked) 1-tray: 8,000 sets per hour (A4 or 8.5 x 11 / 10 sheets / straight stacked) Stack Pile Height Right Tray (A): 360 mm / 14.1 Left Tray (B): 580 mm / 22.8 Max. Transport Thickness 6 mm / 0.24 Voltage / Frequency Single Phase 200 / 220 / 230 V, 50 / 60 Hz Machine Dimensions W1,957 x D652 x H1,102 mm / 77.1 x 25.7 x 43.4 Max. W350 x L500 mm / 13.8 x 19.7 Min. W182 x L128 mm / 7.2 x 5.0 Sheet Weight Range 52 to 208 gsm Production Speed 8,000 sets per hour (A4 or 8.5 x 11 / 10 sheets / straight stacked) 5,000 sets per hour (A4 or 8.5 x 11 / 10 sheets / off-set stacked) Stack Pile Height 360 mm / 14.1 Max. Transport Thickness 6 mm / 0.24 Voltage / Frequency Single Phase 200 / 220 V, 50 / 60 Hz Single Phase 230 V, 50 Hz Machine Dimensions W1,353 x D652 x H1,027 mm / 53.3 x 25.7 x 40.5 (Including Feed Error Tray) Max. W318 x L470 mm / 12.51 x 18.50 Min. W148 x L210 mm / 5.82 x 8.26 Stack Pile Height (A5 - A4) 170 mm / 6.6 (A4 - A3) 100 mm / 3.9 Voltage / Frequency The power is supplied from the collator. Machine Dimensions W645 x D560 x H480 mm / 25.4 x 22.1 x 18.9 Max. W320 x L450 mm / 12.60 x 17.72 Min. W128 x L182 mm / 5.04 x 7.17 Stack Pile Height 320 mm / 12.6 Voltage / Frequency The power is supplied from the collator. Machine Dimensions W590 x D575 x H730 mm / 23.3 x 22.7 x 28.8 Max. W320 x L460 mm / 12.60 x 18.11 Min. W128 x L182 mm / 5.04 x 7.17 Stack Pile Height 110 mm / 4.4 Voltage / Frequency The power is supplied from the collator. Machine Dimensions W480 x D400 x H530 mm / 18.9 x 15.8 x 20.9 Max. W350 x L500 mm / 13.78 x 19.69 Min. W120 x L148 mm / 4.73 x 5.83 Sheet Weight Range Production Speed Speed is set in three steps to match the driving speed of collator. Reject Tray Capacity Max. 30 mm / 1.2 Voltage / Frequency Single Phase 200 / 220 / 240 V, 50 / 60 Hz Single Phase 230 V, 50 Hz Machine Dimensions W1,255 x D686 x H910 mm / 49.4 x 27.0 x 35.9 (Accumulate/Pass Through) Max. W350 x L500 mm / 13.78 x 19.69 (Accumulate) Min. W140 x L204 mm / 5.52 x 8.04 (Pass Through) Min. W120 x L148 mm / 4.73 x 5.83 Sheet Weight Range Max. Thickness 3 mm / 0.11 Voltage / Frequency Belt driving power is transmitted from the Stacker. Machine Dimensions W710 x D600 x H850 mm / 28.0 x 23.7 x 33.5 (When the transport section is opened) Max. W356 x L254 mm / 14.01 x 10.00 Punch/Press (When inserting a paper, W356 x L235 mm / 14.01 x 9.25 ) Min. W210 x L148 mm / 8.27 x 5.83 Max. W356 x L508 mm / 14.01 x 20.00 Through Min. W120 x L90 mm / 4.72 x 3.54 Max. Thickness of Sheet Block 4 mm / 0.15 (Depending on the sheet weight) Sheet Weight Range Normal Paper: 64 to 157 gsm, Art Coated Paper: 85 to 157 gsm Punch Thickness Max. 3.2 mm / 0.12 (Up to 40 sheets, 20 sheets stitched and folded, of 64 gsm) Number of Holes 4 holes Punch Hole Pitch 80 mm Punch Hole Position Dimension from the booklet spine to center of hole can be adjusted from 9 through 14 mm with panel setting. Punch Hole Diameter 6 mm Production Speed Punch/Press Max. 4,300 booklets per hour (A5 Booklet, Booklet Thickness 2.5 mm / 0.098 or less) Fold Only Max. 4,000 booklets per hour (A5 Booklet, Booklet Thickness 2.5 mm / 0.098 or less) Voltage / Frequency Single Phase 200 / 220 / 230 / 240 V, 50 / 60 Hz Machine Dimensions W500x D770 x H1,035 mm / 19.7 x 30.4 x 40.8 Booklet Size Max. 312 x 230 mm / 12.2 x 9.0 (A4 wide, Maximum size for StitchLiner) (Top to Bottom x Spine to Fore-edge) Min. 257 x 182 mm / 10.2 x 7.2 (B5) Sheet Weight Range for Booklet Bond Pape: 64 to 210 gsm, Coated Paper: 80 to 210 gsm Page Number of Booklet Available (Before Inserting) 4 pages (available depending on the condition) to 80 pages (82 gsm) Insert Position Middle of booklet, or Beneath top sheet Max. W220 x L297 mm / 8.6 x 11.6 Min. W100 x L148 mm / 4.0 x 5.9 (A6) Sheet Weight Range for Sheet Normal Paper: 64 to 210 gsm, Coated Paper: 74 to 210 gsm Number of Sheets Inserted Up to 3 sheets Bin Stack Height 125 mm / 4.9 / Bin Error Detection Feed Section Error, Separation Error, Booklet Jam Inline with StitchLiner: Max. 4,000 booklets per hour *1 Inline with /: Max. 3,600 booklets per hour Production Speed *1 Stand-alone: Max. 3,600 booklets per hour (Transport speed of booklet can be changed in three steps.) 3-Phase 200 / 220 V, 50 / 60 Hz Voltage / Frequency Single Phase 230 V, 50 Hz Machine Dimensions W2,330 x D1,900 x H1,800 mm / 91.8 x 74.8 x 70.9 *1 Nonstop operation with Faulty Set Ejecting Function Max. W356 x L610 mm / 14.0 x 24.0 Min. W203 x L203 mm / 8.0 x 8.0 Normal Paper: 52 to 157 gsm Coated Paper: 73 to 157 gsm Sheet Weight Range *When you use thin sheets, you need to decrease the speed depending on the sheet size. *The machine can feed thick sheets (157 through 209 gsm), but the feed speed will decrease. Max. 25,000 sheets per hour [A3] Max. 35,000 sheets per hour [A4 SEF] Feed Speed Max. 45,000 sheets per hour [A4 LEF] (When the sheets are processed one by one.) Sheet Pile Height on Feed Tray Max. 620 mm / 24.4 Voltage / Frequency 3-phase 200-220 V, 50 Hz / 60 Hz, 3-phase 380 / 400 / 415 V, 50 Hz / 60 Hz Machine Dimensions W960 x D740 x H936 mm / 37.8 x 29.2 x 36.9 Max. W350 x L500 mm / 13.77 x 19.68 HOF-30 Feed Min. W200 x L275 mm / 7.88 x 10.83 Max. W350 x L500 mm / 13.77 x 19.68 Min. W120 x L180 mm / 4.73 x 7.09 When connecting with StitchLiner, Bypass Mode W148 / 5.83 x L206 mm / 8.12 at minimum.) set up to W352 x L502mm / 13.86 x 19.76 Sheet Weight Range Normal Paper: 52 to 130 gsm, Coated Paper: 73 to 160 gsm Feed Speed Max. 27,000 sheets per hour (Three Steps Adjustable) Sheet Pile Height on Feed Tray Max. 430 mm / 16.9 Voltage / Frequency Single Phase 200 / 220 / 230 V, 50 / 60 Hz Machine Dimensions W1,460 x D630 x H945 mm / 57.5 x 24.8 x 37.2 Distributed by 510 Kuze Ooyabu-cho, Minami-ku, Kyoto, 601-8206, Japan Phone : +81-(0)75-934-6700 Fax : +81-(0)75-934-6708 www.horizon.co.jp Standard Finishing Systems, 10 Connector Road, Andover, MA 01810 877-404-4460 978-470-1920 Fax 978-470-0819 www.standardfinishing.com 131105/SO/CollStitOP/01E/TV