Remote LightBar Series Datasheet Solid-State Lighting Series Features : Omni-directional light distribution Glare-free LED Line light design High color quality and color consistency Consistent color matching Unprecedented design freedom for solid state lighting products and systems Streamlined supply and production of LED lighting systems Up to 30% higher system efficacy compared to conventional LED lighting design Indoor Lighting Typical Applications : Tube Light Source Chandelier and other decorative applications Cabinet lighting Spots and modules Task lighting Appliances Table consumer lighting Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 1
Table of Contents General Information...3 Technical Data...3 Product Dimensions and Circuit Diagram...4 Electric-Optical Characteristics...7 Assembly Instructions and Recommended Driver Specification...8 Applications...9 Package Information...10 Revision History...11 About Edison Opto...11 Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 2
General Information Introduction Edison Opto Remote LightBar series is based on the blue light emitters with Remote Phosphor tube to achieve an Omni-directional line light with high quality consistent color matching. As for the superior light quality, the product provides high efficiency lighting system which up to 30% higher than conventional LED lighting. The Glare-free feature design also brings users a comfortable visual experience. Moreover, the product series offers three kinds of color temperature, while the promising efficiency makes Remote LightBar the best choice for a widely illuminated application in task, tube, cabinet, and chandelier lighting using. Ordering Code Format 6 LBRM xw N K 000000x X1 X2~X5 X6~X7 X8 X9 X10~X16 X1 X2 X3 X4 X5 X6 Item Series Emitting Color Angle Driver Serial No. 6 Module LBRM Remote CW Cool White N 120 K CV 25V xxxxxxx -- NW WW Neutral White Warm White Technical Data Item Specification 1FT 2FT 4FT Dimensions 301 22 21mm 596 22 21mm 1186 22 21mm Operating Ambient Temperature -20 ~ +40 C Storage Temperature -40 ~ +60 C Storage Humidity 50~60% Notes: 1. This product is recommended to use a constant current power supply system. 2. As the initial value of the measured data. Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 3
Product Dimensions and Circuit Diagram 1FT Dimension 301±0.5 22.1±0.5 291 20.75 Unit: mm 1FT Circuit Diagram Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 4
2FT Dimension 596±0.5 22.1±0.5 590 20.75 Unit: mm 2FT Circuit Diagram Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 5
4FT Dimension 1186±0.5 1180 22.1±0.5 20.75 Unit: mm 4FT Circuit Diagram Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 6
Electric-Optical Characteristics Order Code Color CCT(K) Typ. Luminous Flux (lm) Power Consumption(W) Forward Current (ma) CRI 6LBRMCWNK0000001 Cool White 5000K 900 6LBRMNWNK0000001 Neutral White 4000K 850 9W 350 6LBRMWWNK0000001 Warm White 3000K 800 6LBRMCWNK0000002 Cool White 5000K 1900 6LBRMNWNK0000002 Neutral White 4000K 1800 6LBRMWWNK0000002 Warm White 3000K 1700 6LBRMCWNK0000003 Cool White 5000K 3900 6LBRMNWNK0000003 Neutral White 4000K 3700 6LBRMWWNK0000003 Warm White 3000K 3500 18W 700 36W 1400 >80 Notes: 1. This product is recommended to use a constant current power supply system. 2. As the initial value of the measured data. 3. Luminous flux is measured with an accuracy of ±10%. 4. Correlated Color Temperature is measured with an accuracy of ±100K. 5. Power consumption is measured with an accuracy of ±10%. Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 7
Assembly Instructions and Recommended Driver Specification 1. Use M3 screw to secure the clamp on a level surface. 2. Push and lock the LightBar. M3 Screw A: ø2±0.15mm Caution: B: A: ø5.5±0.5mm ø2±0.15mm C: B: 6mm ø5.5±0.5mm C: 6mm D: 1.5±0.15mm Input Voltage AC 100~240V Output Voltage DC24~29V Operating Current (Constant) Rated Power Dimensions 350mA > 12W 1FT 700mA >20W 2FT 1400mA >40W 4FT Step2 Assembly Instructions: 1. Connect the Remote LightBar to the DC driver shown as step 1. 2. Plug the driver to AC outlet shown as step 2. Step1 Caution: Never plug the driver to AC outlet before the Remote LightBar is properly connected, otherwise it may damage the LEDs permanently. Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 8
Applications Remote LightBar with heatsink series are compliant to the Restriction of Hazardous Substances Directive (RoHS). The restricted materials including lead, mercury cadmium hexavalent chromium, Polybrominated Biphenyls (PBB) and Polybrominated Diphenyl Ether (PBDE) are not used in Remote LightBar with heatsink series to provide an environmentally friendly product to the customers. Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 9
Package Information 10 pc/1 layer 5 layers/1 carton 50 pc/1 carton Notes: 1FT Carton Dimensions : 430mm(length)*405mm(width)*245mm(height) 2FT Carton Dimensions : 700mm(length)*429mm(width)*244mm(height) 4FT Carton Dimensions : 1290mm(length)*429mm(width)*244mm(height) Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 10
Revision History Versions Description Release Date 1 Establish order code information 2014/01/02 2 Revise Dimensions of techanical data 2014/03/20 About Edison Opto Edison Opto is a leading manufacturer of high power LED and a solution provider experienced in LDMS. LDMS is an integrated program derived from the four essential technologies in LED lighting applications- Thermal Management, Electrical Scheme, Mechanical Refinement, Optical Optimization, to provide customer with various LED components and modules. More Information about the company and our products can be found at Copyright 2014 Edison Opto. All rights reserved. No part of publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photo copy, recording or any other information storage and retrieval system, without prior permission in writing from the publisher. The information in this publication are subject to change without notice. For general assistance please contact: service@edison-opto.com.tw For technical assistance please contact: LED.Detective@edison-opto.com.tw Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 11