PLCC 3014 0.2W CRI 80 6000K Datasheet PLCC Series Features : High luminous Intensity and high efficiency Based on Blue : InGaN technology Wide viewing angle : 120 Excellent performance and visibility Suitable for all SMT assembly methods IR reflow process compatible Environmental friendly; RoHS compliance Typical Applications : Signal and Symbol Luminaire Indoor Displays Backlighting (illuminated advertising, general lighting) Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 1
Table of Contents General Information...3 Absolute Maximum Ratings...4 Characteristics...4 Luminous Flux Characteristic...5 Voltage Bin Structure...5 Mechanical Dimensions...6 Color BIN code...7 Characteristic Curve...8 Reliability...13 Reflow Profile...14 Product Packaging Information...15 Revision History...16 About Edison Opto...16 Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 2
General Information Introduction Ultra high luminous efficacy, combined with the flexibility in design due to its slim and miniature size, PLCC LED Series are optimized to be used as lighting for signboard. Ordering Code Format 2 T 01 X2 xw xx 000 xxx X1 X2 X3-X4 X5-X6 X7-X8 X9-X10 X11-X13 X14-X16 X1 X2 X3-X4 X5-X6 X7-X8 Type Component Series Wattage Color 2 Emitter T PLCC 01 3014 X2 0.2W CW Cool White NW WW Neutral White Warm White X9-X10 X11-X13 X14-X16 Internal code PCB Board Serial Number - - 000 - - - Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 3
Absolute Maximum Ratings Absolute maximum ratings (T a =25 o C) Parameter Symbol Value Units Forward Current I F 90 ma Pulse Forward Current (tp<=100μs, Duty cycle=0.25) I pulse 120 ma Reverse Current I R 10 ua Reverse Voltage V R 5 V LED Junction Temperature T J 125 C Operating Temperature - -40 ~ +85 C Storage Temperature - -40 ~ +125 C ESD Sensitivity (HBM) V B 2,000 V Soldering Temperature T s Reflow Soldering : 255~260 o C/10~30sec Manual Soldering : 350 o C/3sec Notes: 1. Proper current derating must be observed to maintain junction temperature below the maximum at all time. 2. LEDs are not designed to be driven in reverse bias. Characteristics Parameter Symbol Value Units Viewing Angle (Typ.) 2Θ 1/2 120 Degree Forward voltage (Typ.) V F 3.2 V Thermal resistance - 30 o C/W CRI - >80 - CCT (Cool White) - 6,000 K JEDEC Moisture Sensitivity - Notes: 1. 2θ 1/2 is the off-axis angle where the luminous intensity is half of the axial luminous intensity. 2. Color rendering index CRI Tolerance: ±2 3. CIE_x/y tolerance: ±0.005 Level 2a Floor Life Conditions: 30 C / 60% RH Soak Requirements(Standard) Time (hours): 120+1/-0 Conditions: 60 C / 60% RH - Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 4
Luminous Flux Characteristic Luminous Flux Characteristics, I F =60mA and T J =25 C Color Cool White Group Min. Luminous Flux(lm) Max. Luminous Flux(lm) 18 18 20 20 20 22 22 22 24 24 24 26 Forward Current(mA) Order Code 60 2T01X2CW11000002 Note: The luminous flux performance is guaranteed within published operating conditions. Edison Opto maintains a tolerance of ±10% on flux measurements. Voltage Bin Structure Group Min. Voltage (V) Max. Voltage (V) VA1 2.8 2.9 VB1 2.9 3.0 VC1 3.0 3.1 VA2 3.1 3.2 VB2 3.2 3.3 VC2 3.3 3.4 VA3 3.4 3.5 VB3 3.5 3.6 Note: Forward voltage measurement allowance is ± 0.06V. Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 5
Mechanical Dimensions Emitter Type Dimension 3.00 2.70 Circuit 0.70 0.70 1.40 1.63 0.83 Solder Pad 3.04 1.67 0.85 0.8 0.82 Notes: 1. All dimensions are measured in mm. 2. Tolerance : ± 0.20 mm Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 6
Color BIN code Color region stay within Macadam "3-Step/6-step" ellipse from the chromaticity center. Cool White 0.365 5560K 0.355 6000K 60C 0.345 6700K 60U CIE-y 0.335 60B 60T 603 60V 60D 0.325 60S 60A 0.315 0.305 0.305 0.31 0.315 0.32 0.325 0.33 0.335 CIE-x CCT Steps Cx Cy a b theta 1 0.3214 0.33615 0.00249 0.00107 59.09 6000K 3 0.3214 0.33615 0.00747 0.00321 59.09 6 0.3214 0.33615 0.01494 0.00642 59.09 60A 60B 60C 60D X Y X Y X Y X Y 0.3109 0.3257 0.3100 0.3376 0.3205 0.3481 0.3214 0.3362 0.3214 0.3362 0.3205 0.3481 0.3310 0.3586 0.3319 0.3467 0.3223 0.3242 0.3214 0.3362 0.3319 0.3467 0.3328 0.3347 0.3118 0.3137 0.3109 0.3257 0.3214 0.3362 0.3223 0.3242 Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 7
Characteristic Curve Color Spectrum 1.2 1.0 Relative luminous Intensity 0.8 0.6 0.4 0.2 0 400 500 600 700 800 Wavelength(nm) Color Spectrum at a typical CCT for PLCC 3014 CRI80 6000K Beam Pattern Normalized Relative Intensity 1.0 0.5 Ta=25 C 0-90 -60-30 0 0 10 20 0.5 30 40 50 60 70 80 90 1.0 Radiation Angle Beam pattern diagram for PLCC 3014 series Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 8
Forward Current vs. ForwardVoltage 120 100 Forward Current (ma) 80 60 40 20 0 2.85 2.9 2.95 3 3.05 3.1 3.15 3.2 3.25 3.3 Forward Voltage (V) Forward Current vs. Forward Voltage for PLCC 3014 0.2W CRI80 6000K Relative Luminous Intensity vs. Forward Current 1.6 Relative Lumnious Intensity 1.4 1.2 1.0 0.8 0.6 0.4 20 30 40 50 60 70 80 90 100 Forward Current (ma) Realative Luminous Intensity vs. Forward Current for PLCC 3014 0.2W CRI80 6000K Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 9
Relative Luminous Flux vs. Junction Temperature 1.2 Relative Luminous Intensity 1.0 0.8 0.6 0.4 0.2 0 0 20 40 60 80 100 120 140 Junction Temperature ( o C) Relative Luminous flux vs. junction temperature for PLCC 3014 0.2W CRI80 6000K Forward Voltage vs. Junction Temperature 3.15 3.10 Forward Voltage (V F ) 3.05 3.00 2.95 2.90 2.85 0 20 40 60 80 100 120 140 Junction Temperature ( o C) Forward voltage vs. junction temperature for PLCC 3014 0.2W CRI80 6000K Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 10
Δx,Δy vs. Forward Current 0.015 0.010 0.005 Δx Δy Δx,Δy 0.000-0.005-0.010-0.015 20 30 40 50 60 70 80 90 100 Forward Current (ma) Δx,Δy vs. Forward Current for PLCC 3014 0.2W CRI80 6000K Δx,Δy vs. Junction Temperature 0.015 0.010 0.005 Δx Δy Δx,Δy 0.000-0.005-0.010-0.015 0 20 40 60 80 100 120 140 Junction temperature ( o C) Δx,Δy vs. Junction temperature for PLCC 3014 0.2W CRI80 6000K Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 11
Maximum Current vs. Ambient Temperature 108 90 Maximum Current (ma) 72 54 36 18 0 0 20 40 60 80 100 120 140 Ambient Temperature ( o C) Maximum Current vs. Ambient Temperature for PLCC 3014 0.2W CRI80 6000K Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 12
Reliability NO. Test Item Test Condition Remark 1 Temperature Cycle 2 Thermal Shock -40 C~100 C 30, 30, mins -40 C~100 C 15, 15 mins 10 sec 100 Cycle 100 Cycle 3 Resistance to Soldering Heat T SOL =260 C, 30 sec 3 times 4 Moisture Resistance 25 C~65 C 90% RH 24 hrs / 1 cycle 10 Cycle 5 High-Temperature Storage T A =100 C 1,000 hrs 6 Humidity Heat Storage T A =85 C RH=85% 1,000 hrs 7 Low-Temperature Storage T A =-40 C 1,000 hrs 8 Operation Life test 25 C 1,000 hrs 9 High Temperature Operation Life test 85 C 1,000 hrs 10 High Humidity Heat Life Test 85 o C, 85%RH 1,000 hrs 11 ON/OFF Test 30 sec ON, 30 sec OFF 1.5W times Failure Criteria Item Criteria for Judgment Min. Max. Lumen Maintenance 85% - Δu'v' - 0.006 Forward Voltage - Initial Data x 1.1 Reverse Current - 10 μa Resistance to Soldering Heat No dead lamps or visual damage Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 13
Reflow Profile The following reflow profile is from IPC/JEDEC J-STD-020D which provided here for reference. Reflow Profiles Classification Reflow Profiles Profile Feature Preheat & Soak Temperature min (Tsmin) Temperature max (Tsmax) Time (Tsmin to Tsmax) (ts) Average ramp-up rate (Tsmax to Tp) Liquidous temperature (TL) Time at liquidous (tl) Pb-Free Assembly 150 C 200 C 60-120 seconds 3 C/second max. 217 C 60-150 seconds Peak package body temperature (Tp)* 255 C ~260 C * Classification temperature (Tc) 260 C Time (tp)** within 5 C of the specified classification temperature (Tc) Average ramp-down rate (Tp to Tsmax) Time 25 o C to peak temperature 30** seconds 6 C/second max. 8 minutes max. Notes: 1. * Tolerance for peak profile temperature (Tp) is defined as a supplier minimum and a user maximum. 2. ** Tolerance for time at peak profile temperature (tp) is defined as a supplier minimum and a user maximum. Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 14
Product Packaging Information 1.75±0.10 8.00±0.20 3.50±0.05 4.0±0.05 (-) 8.00 4.0±0.10 (+) 2.0±0.05 01.5±0.1 0.23±0.05 1.04±0.10 5 o 3.4±0.1 1.75±0.10 Seal Label Reel Taping reel dimensions Label Moisture absorbent material Package & label Moisture proof bag Item Quantity Total Dimensions(mm) Reel 4,000pcs 4,000pcs R=178 Carton 25 reels 100,000pcs 353*254*256 Starting with 50pcs empty,and 50pcs empty at the last Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 15
Revision History Versions Description Release Date 1 Establish order code information 2014/09/18 2 Add CIE_x/y tolerance 2015/01/09 About Edison Opto Edison Opto is a leading manufacturer of high power LED and a solution provider experienced in LDMS. LDMS is an integrated program derived from the four essential technologies in LED lighting applications- Thermal Management, Electrical Scheme, Mechanical Refinement, Optical Optimization, to provide customer with various LED components and modules. More Information about the company and our products can be found at Copyright 2015 Edison Opto. All rights reserved. No part of publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photo copy, recording or any other information storage and retrieval system, without prior permission in writing from the publisher. The information in this publication are subject to change without notice. For general assistance please contact: service@edison-opto.com.tw For technical assistance please contact: LED.Detective@edison-opto.com.tw Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 16