Referenes For motor ontrol up to 75 kw at 400 V, in ategory AC-3 Control iruit: a.., d.. or low onsumption 3-pole ontators for onnetion by srew lamp terminals or onnetors (1) 810356 Standard power ratings Rated Instantan- Basi referene. Weight of 3-phase motors opera- eous Complete with ode indiating (4) 50/60 Hz in ategory AC-3 tional auxiliary ontrol iruit voltage () (θ 60 C) urrent ontats Fixing (3) in AC-3 0V 380V 660V 440 V 30V 400V 415V 440V 500V 690V 1000V up to kw kw kw kw kw kw kw A kg LC1-D09pp. 4 4 4 5.5 5.5 9 1 1 LC1-D09pp (5) 0.30 3 5.5 5.5 5.5 7.5 7.5 1 1 1 LC1-D1pp (5) 0.35 4 7.5 9 9 10 10 18 1 1 LC1-D18pp (5) 0.330 810353 5.5 11 11 11 15 15 5 1 1 LC1-D5pp (5) 0.370 7.5 15 15 15 18.5 18.5 3 1 1 LC1-D3pp (5) 0.375 9 18.5 18.5 18.5 18.5 18.5 38 1 1 LC1-D38pp (5) 0.380 11 18.5 30 40 1 1 LC1-D40pp (5) 1.400 15 5 30 30 33 30 50 1 1 LC1-D50pp (5) 1.400 18.5 30 37 37 37 37 37 65 1 1 LC1-D65pp 1.400 LC1-D5pp 37 45 45 55 45 45 80 1 1 LC1-D80pp 1.590 5 45 45 45 55 45 45 95 1 1 LC1-D95pp 1.610 30 55 59 59 75 80 75 115 1 1 LC1-D115pp.500 81035 40 75 80 80 90 100 90 150 1 1 LC1-D150pp.500 3-pole ontators for onnetion by lugs or bars (1) Insert the digit 6 before the voltage ode in the referenes seleted above. Example: LC1-D09pp beomes LC1-D096pp. Aessories 105517 LC1-D95pp LC1-D115pp Auxiliary ontat bloks and modules: see pages / to /91. (1) See note (1) on next page. () Control iruit voltages. a.. supply Volts 4 4 48 110 115 0 30 40 380 400 415 440 500 LC1-D09...D150 (D115 and D150 oils with integral suppression devie fitted as standard) 50/60 Hz B7 D7 E7 F7 FE7 M7 P7 U7 Q7 V7 N7 R7 d.. supply Volts 1 4 36 48 60 7 110 15 0 50 440 LC1-D09...D38 (oils with integral suppression devie fitted as standard) U 0.7 1.5 U JD BD CD ED ND SD FD GD MD UD RD LC1-D40...D95 U 0.85 1.1 U JD BD CD ED ND SD FD GD MD UD RD U 0.75 1. U JW BW CW EW SW FW MW LC1-D115 and D150 (oils with integral suppression devie fitted as standard) U 0.75 1. U BD ED ND SD FD GD MD UD RD Low onsumption Volts 5 4 48 7 LC1-D09...D38 (oils with integral suppression devie fitted as standard) U 0.7 1.5 U AL BL EL SL For other voltages between 5 and 690 V, see pages /10 to /107. (3) LC1-D09 to D38: lip-on mounting on 35 mm 5 rail AM1-DP or srew fixing. LC1-D40 to D95 a: lip-on mounting on 35 mm or 75 mm 5 rail AM1-DL or srew fixing. LC1-D40 to D95 : lip-on mounting on 75 mm 5 rail AM1-DL or srew fixing. LC1-D115 and D150: lip-on mounting on x 35 mm 5 rails AM1-DP or srew fixing. (4) The weights indiated are for ontators with a.. ontrol iruit. For d.. or low onsumption ontrol iruit, add 0.160 kg for ontators LC1-D09 to D38, 0.785 kg for ontators LC1-D40 to D65 and 1 kg for ontators LC1-D80 and D95. (5) For purhase in bulk paks, see page 1/51. pages 1/1 to 1/35 Charateristis: pages / to /67 pages /94 to /97 pages /98 and /99 /74 Shneider Eletri
Charateristis Model d Type of ontator LC1- LC1- LC1- LC1- LC1-D115 & D09 D18 D5 D38 D40 D50 D95 LC1-D150 DT0 & DT5 DT3 DT6 0 Environment Rated insulation voltage (Ui) Conforming to EN 60947-4-1, overvoltage ategory III, degree of pollution: 3 V 690 1000 Conforming to UL, CSA V 600 Rated impulse withstand voltage Conforming to EN 60947 kv 6 8 (Uimp) Conforming to standards IEC 947-1, 947-4-1, NFC 63-110, VDE 0660, BS 4, JEM 1038, EN 60947-1, EN 60947-4-1. GL, DNV, PTB, RINA pending Produt ertifiations Separation insulation Conforming to VDE 0106 parts 101 and A1 (projet /89) V 400 UL, CSA Complies with SNCF, Sihere Trennung reommendations Degree of protetion (1) Conforming to VDE 0106 (front fae only) Power onnetion Protetion against diret finger ontat IP X Coil onnetion Protetion against diret finger ontat IP X (exept LC1-D40 D80) Protetive treatment Conforming to IEC 68 TH Ambient air temperature Storage C - 60 + 80 around the devie Operation C - 5 + 60 Permissible C - 40 + 70, for operation at U Maximum operating altitude Without derating m 3000 Operating position Without derating ± 30 possible, in relation to normal vertial mounting plane Flame resistane Conforming to UL 94 V 1 Conforming to IEC 695--1 C 960 Shok resistane () Contator open gn 10 8 8 8 6 1/ sine wave = 11ms Contator losed gn 15 15 10 10 15 Vibration resistane () Contator open gn 5 300 Hz Contator losed gn 4 4 4 3 4 (1) Protetion ensured for the onnetion ross-setions shown on the next page and for onnetion via able. () In the least favourable diretion, without hange of ontat state (oil supplied at Ue). pages 1/1 to 1/35 Referenes: pages /74 to /77 pages /94 to /97 pages /98 and /99 / Shneider Eletri
Charateristis Model d Connetions for power and ontrol iruits Type of ontator LC1- D09 & D1 D18 D5 D3 D38 D18 (4P) D40 D50 & D80 & D115 & D150 DT0 & (3P) DT3 DT60 D65 D95 DT5 Power iruit onnetions Connetion via able Srew Tightening Srew lamps -input onnetor lamps 1-input onnetor -input onnetor Flexible able 1 ondutor mm 1 4 1.5 6 1.5 10.5 10.5 16.5 5.5 5 4 50 10 10 without able end ondutors mm 1 4 1.5 6 1.5 6.5 10.5 16.5 16.5 16 4 5 10 10 + 10 50 Flexible able 1 ondutor mm 1 4 1 6 1 6 1 10.5 10.5 5.5 5 4 50 10 10 with able end ondutors mm 1.5 1 4 1 4 1.5 6.5 10.5 10.5 10 4 16 10 10 + 10 50 Solid able 1 ondutor mm 1 4 1.5 6 1.5 6 1.5 10.5 16.5 5.5 5 4 50 10 10 without able end ondutors mm 1 4 1.5 6 1.5 6.5 10.5 16.5 16.5 16 4 5 10 10 + 10 50 Srewdriver Phillips head N N N N N Ø flat srewdriver Ø 6 Ø 6 Ø 6 Ø 6 Ø 6 Ø 6 Ø 8 Ø 6 Ø 8 Ø 6 Ø 8 6 sided key 4 4 Tightening torque N.m 1.7 1.7.5.5.5 5 5 9 1 Connetion via spring terminals Flexible able without able end 1 ondutor mm.5 (4: DT5) ondutors mm.5 (4: DT5) 4 4 4 (10: DT3 DT60) 4 4 4 Connetion via bars or lugs Bar ross-setion 3 x 16 5 x 5 Lug external Ø mm 8 8 10 10 1 13 16 17 5 Ø of srew mm M3.5 M3.5 M4 M4 M5 M5 M6 M6 M8 Srewdriver Phillips head N N N N N N N 3 Ø flat srewdriver Ø 6 Ø 6 Ø 6 Ø 6 Ø 6 Ø 8 Ø 8 Ø 8 Key for hexagonal headed srew 10 13 Tightening torque N.m 1.7 1.7.5.5.5 6 6 8 14 Control iruit onnetions Connetion via able (tightening via srew lamps) Flexible able 1 ondutor mm 1 4 1 4 1 4 1 4 1 4 1 4 1 4 1 4 1.5 without able end ondutors mm 1 4 1 4 1 4 1 4 1 4 1 4 1 4 1 4 1.5 Flexible able 1 ondutor mm 1 4 1 4 1 4 1 4 1 4 1.5 1.5 1.5 1.5 with able end ondutors mm 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 Solid able 1 ondutor mm 1 4 1 4 1 4 1 4 1 4 1 4 1 4 1 4 1.5 without able end ondutors mm 1 4 1 4 1 4 1 4 1 4 1 4 1 4 1 4 1.5 Srewdriver Phillips head N N N N N N N N N Ø flat srewdriver Ø 6 Ø 6 Ø 6 Ø 6 Ø 6 Ø 6 Ø 6 Ø 6 Ø 6 Tightening torque N.m 1.7 1.7 1.7 1.7 1.7 1. 1. 1. 1. Connetion via spring terminals Flexible able 1 ondutor mm.5.5.5.5 without able end ondutors mm.5.5.5.5 Connetion via bars or lugs Lug external Ø mm (1) 8 8 8 8 Ø of srew mm (1) M3.5 M3.5 M3.5 M3.5 Srewdriver Phillips head N N N N Ø flat srewdriver Ø 6 Ø 6 Ø 6 N 6 Tightening torque N.m 1. 1. 1. 1. (1) Spade onnetor or able lug, see onnetion via able above. pages 1/1 to 1/35 Referenes: pages /74 to /77 pages /94 to /97 pages /98 and /99 Shneider Eletri /63
Charateristis Model d Type of ontator LC1- D09 DT0 D1 DT5 D18 DT3 D5 DT40 Pole harateristis Rated operational urrent (Ie) In AC-3, θ 60 C A 9 1 18 5 (Ue 440 V) In AC-1, θ 60 C A 5 0 5 3 40 Rated operational voltage (Ue) Up to V 690 690 690 690 Frequeny limits Of the operating urrent Hz 5 400 5 400 5 400 5 400 Conventional thermal urrent (Ith) θ 60 C A 5 0 5 5 3 3 40 40 Rated making apaity (440 V) Conforming to IEC 947 50 50 300 450 Rated breaking apaity (440 V) Conforming to IEC 947 50 50 300 450 Permissible short-time rating For 1 s A 10 10 40 380 No urrent flowing for preeding For 10 s A 105 105 145 40 15 minutes at θ 40 C For 1 min A 61 61 10 For 10 min A 30 30 40 50 Protetion by fuse Without thermal overload relay, type 1 A 5 40 50 63 against short-iruits (U 690 V) fuse gg type A 0 5 35 40 With thermal overload relay A See pages /5 and /53, for am or gg fuse ratings orresponding to the assoiated thermal overload relay Average impedane per pole At Ith and 50 Hz mω.5.5.5 Power dissipation per pole AC-3 W 0.0 0.36 0.8 1.5 for the above operating urrents AC-1 W 1.56 1.56.5 3. a.. ontrol iruit harateristis Rated ontrol iruit voltage (U) 50/60 Hz V 1 690 Control voltage limits 50 or 60 Hz oils Operational Drop-out 50/60 Hz oils Operational 0.8 1.1 U on 50 Hz and 0.85 1.1 U on 60 Hz at 60 C Drop-out 0.3 0.6 U at 60 C Average onsumption a 50 Hz Inrush 50 Hz oil VA at 0 C and at U Cos ϕ 0.75 50/60 Hz oil VA 70 Sealed 50 Hz oil VA Cos ϕ 0.3 50/60 Hz oil VA 7 a 60 Hz Inrush 60 Hz oil VA Cos ϕ 0.75 50/60 Hz oil VA 70 Sealed 60 Hz oil VA Cos ϕ 0.3 50/60 Hz oil VA 7.5 Heat dissipation 50/60 Hz W 3 Operating time (3) Closing C ms 1 Opening O ms 4 19 Mehanial life 50 or 60 Hz oil in millions of operating yles 50/60 Hz oil on 50 Hz 15 Maximum operating rate In operating yles per hour 3600 at ambient temperature 60 C (1) Protetion ensured for the onnetion ross-setions shown on page /63 and for onnetion via able. () In the least favourable diretion, without hange of ontat state (oil supplied at Ue). (3) The losing time C is measured from the moment the oil supply is swithed on to initial ontat of the main poles. The opening time O is measured from the moment the oil supply is swithed off to the moment the main poles separate. pages 1/1 to 1/35 Referenes: pages /74 to /77 pages /94 to /97 pages /98 and /99 / Shneider Eletri
D3 DT60 D38 D40 D50 D65 D80 D95 D115 D150 3 3 38 40 50 65 80 95 115 150 50 60 50 60 80 80 15 15 00 00 690 690 690 1000 1000 1000 1000 1000 1000 1000 5 400 5 400 5 400 5 400 5 400 5 400 5 400 5 400 5 400 5 400 50 60 50 60 80 80 15 15 00 00 550 500 550 800 900 1000 1100 1100 160 1660 550 500 550 800 900 1000 1100 1100 1100 1400 430 430 430 70 810 900 990 1100 1100 1400 60 60 310 30 400 50 0 800 950 100 138 138 150 165 08 60 30 400 550 580 60 60 60 7 110 135 135 50 50 63 63 63 80 100 160 00 00 50 315 63 63 63 80 100 15 160 160 00 50 See pages /5 and /53, for am or gg fuse ratings orresponding to the assoiated thermal overload relay 1.5 1.5 1 0.8 0.8 0.6 0.6 3.4 3.7 4. 5.1 7. 7.9 13.5 5 5 5 5.4 9.6 6.4 1.5 1.5 4 4 1 690 4 660 4 500 0.85 1.1 U at 55 C 0.85 1.1 U at 55 C 0.3 0.6 U at 55 C 0.3 0.5 U at 55 C 0.8 1.1 U on 50 Hz and 0.8 1.1 U on 50 Hz and 0.85 1.1 U on 60 Hz at 60 C 0.85 1.1 U on 60 Hz at 55 C 0.8 1.15 U on 50/60 Hz at 55 C 0.3 0.6 U at 60 C 0.3 0.6 U at 55 C 0.3 0.5 U at 55 C 00 300 0.75 0.75 0.8 0.9 70 45 80 350 80 350 0 0.3 0.3 0.3 0.9 7 6 18 18 0 300 0.75 0.75 0.8 0.9 70 45 80 350 80 350 0.3 0.3 0.3 0.9 7.5 6 18 18 3 6 10 3 8 3 4.5 1 0 6 0 6 0 6 0 35 0 35 40 75 0 35 4 19 8 1 8 1 8 1 6 0 6 0 0 35 40 75 16 16 16 10 10 8 15 6 6 6 4 4 8 8 3600 3600 3600 3600 3600 3600 400 100 Shneider Eletri /65
Charateristis (ontinued) Model d d.. ontrol iruit harateristis Type of ontator LC1- LC1- or LP1- LC1 or LC1-D115 & D09 D38 D40 D65 LP1-D80 LC1-D150 DT0 DT60 Rated ontrol iruit voltage (U) V 1 440 1 440 4 440 Rated insulation voltage Conforming to IEC 947-1 V 690 Conforming to UL, CSA V 600 Control voltage limits Operational Standard oil 0.7 1.5 U 0.85 1.1 U at 55 C 0.75 1. U at 60 C at 55 C Wide range oil 0.75 1. U at 55 C Drop-out 0.1 0.5 U 0.1 0.3 U at 55 C 0.15 0.4 U at 60 C at 55 C Average onsumption Inrush W 5.4 70 to 365 at 0 C and at U Sealed W 5.4.4 5.1 Average operating time (1) Closing C ms 55 85 110 95 130 0 35 at U Opening O ms 0 0 35 0 35 40 75 Note: The aring time depends on the iruit swithed by the poles. For normal 3-phase appliations, the aring time is usually less than 10 ms. The load is isolated from the supply after a time equal to the sum of the opening time and the aring time. Time onstant (L/R) ms 8 65 75 5 Mehanial life at U In millions of operating yles 30 0 0 8 Maximum operating rate In operating yles per hour 3600 3600 3600 100 at ambient temperature 60 C Low onsumption ontrol iruit harateristis Rated insulation voltage Conforming to EN 60947-1 V 690 Conforming to UL, CSA V 600 Maximum voltage Of the ontrol iruit on 50 Average onsumption d.. Wide range oil Inrush W.4 at 0 C and at U (0.7 1.5 U) Sealed W.4 Operating time (1) Closing C ms 70 at U and at 0 C Opening O ms 5 Voltage limits (θ 60 C) Operational 0.7 to 1.5 U of the ontrol iruit Drop-out 0.1 0.3 U Time onstant (L/R) ms 40 Mehanial life In millions of operating yles 30 Maximum operating rate At ambient temperature 60 C ops/h 3600 (1) Operating times depend on the type of ontator eletromagnet and its ontrol mode. The losing time C is measured from the moment the oil supply is swithed on to initial ontat of the main poles. The opening time O is measured from the moment the oil supply is swithed off to the moment the main poles separate. () In the least favourable diretion, without hange of ontat state. pages 1/1 to 1/35 Referenes: pages /74 to /77 pages /94 to /97 pages /98 and /99 /66 Shneider Eletri
Dimensions Model d ontators Control iruit: a.. LC1-D09 D18 (3-pole) Minimum eletrial learane 44 LC1-D5 D38 (3-pole) LC1-DT0 DT60 (4-pole) Minimum eletrial learane 44 17 17 b b 10 1 3 1,5 45 10 1 3 1,5 45 LC1- D09 D093 D099 D5 D53 DT0 DT03 DT3 DT33 D18 D183 D189 D38 & D33 & DT5 & DT53 DT60 & DT603 b without add-on bloks 77 99 80 85 99 85 99 91 105 with LAD-4BB 94 107 95.5 98 107 98 with -Dp 110 (1) 13 (1) 111.5 (1) 114 (1) 13 (1) 114 with -DF, DT 119 (1) 13 (1) 10.5 (1) 13 (1) 13 (1) 19 with -DR, DW, DL 16 (1) 139 (1) 17.5 (1) 130 (1) 139 (1) 190 without over or add-on bloks 90 90 90 90 98 98 with over, without add-on bloks 86 86 86 9 9 9 9 100 100 1 with LAD-N or C ( or 4 ontats) 117 117 117 13 13 13 13 131 131 with LA6-DK10, LAD-6K10 19 19 19 135 135 135 135 143 143 3 with LAD-T, R, S 137 137 137 143 143 143 143 151 151 with LAD-T, R, S and sealing over 141 141 141 147 147 147 147 155 155 (1) Inluding LAD-4BB LC1-D40 D65 (3-pole) LC1-D80 and D95 (3-pole) LC1-D65004, D40008 and D65008 (4-pole) 3 44 LC1-D80004 and D80008 (4-pole) 3 44 Minimum eletrial learane Minimum eletrial learane 1 1 3 1,5 a 1,5 1 1 3 1,5 a 1,5 LC1- D40 D65 D40008 D80 D95 D80004 D80008 D65004 D65008 a 75 85 85 85 96 96 with -Dp 135 135 135 135 135 135 with -DB3 135 with -DF, DT 14 14 14 14 14 14 with -DM, DR, DW, DL 150 150 150 150 150 150 without over or add-on bloks 114 15 15 15 15 140 with over, without add-on bloks 119 130 130 1 with LAD-N (1 ontat) 139 139 150 150 150 150 with LAD-N or C ( or 4 ontats) 147 147 158 158 158 158 with LA6-DK 159 159 170 170 170 170 3 with LAD-T, R, S 167 167 178 178 178 178 with LAD-T, R, S and sealing over 171 171 18 18 18 18 LC1-D115 and D150 (3-pole) LC1-D115004 (4-pole) LAD-8 LC1- D115 D115004 D115006 D150006 D1150046 D150 a 10 150 10 10 155 with -DA 174 174 174 174 174 with -DF, DT 185 185 185 185 185 with -DM, DR, DL 188 188 188 188 188 with -DW 188 188 188 188 without over or add-on bloks 13 13 115 115 115 with over, without add-on bloks 136 1 with LAD-N or C ( or 4 ontats) 150 150 150 150 150 with LA6-DK0 155 155 155 155 155 3 with LAD-T, R, S 168 168 168 168 168 with LAD-T, R, S and sealing over 17 17 17 17 17 Minimum eletrial learane 10 1 3 158 a pages 1/1 to 1/35 Charateristis: pages / to /67 Referenes: pages /74 to /77 pages /98 and /99 /94 Shneider Eletri
Shemes TeSys ontrol relays 0 TeSys d ontrol relays and add-on bloks Instantaneous auxiliary ontats 5 N/O 3 N/O + N/C CAD 50 CAD 3 A 14 4 34 44 04 A 14 3 44 04 A1 13/NO 3/NO 33/NO 43/NO 03/NO A1 13/NO 1/NC 31/NC 43/NO 03/NO Instantaneous auxiliary ontat bloks 1 N/O + 1 N/C N/O N/C LAD N11 LAD 8N11 (1) LAD N0 LAD 8N0 (1) LAD 8N0 LAD N0 1 (183) 1 (171) 1 (183) 1 (173) 15 (181) 1 (171) 5 1 (1) 1 (17) 1 (1) 163/NC (174) 151/NC (18) 1 (17) 51/NC (1) The fi gures in brakets are for the devie mounted on the RH side of the ontrol relay. N/O + F N/C 1 N/O + 3 N/C 4 N/O 4 N/C 3 N/O + 1 N/C LAD N LAD N13 LAD N40 LAD N04 LAD N31 7 7 8 74 5 7 8 74 71/NC 71/NC 81/NC 73/NO 51/NC 71/NC 81/NC 73/NO N/O + N/C inluding 1 N/O + 1 N/C make before break With dust and damp proteted ontats N/O proteted N/C proteted N/O proteted () N/O proteted + N/O non proteted N/O proteted + 1 N/O + 1 N/C non proteted LAD C LA1 DX0 LA1 DX0 LA1 DY0 LA1 DZ40 LA1 DZ31 76 75/NC 88 87/NO 5 51/NC 74 73/NO 74 73/NO () Produt fi tted with 4 earth sreen ontinuity terminals. Time delay auxiliary ontat bloks Mehanial lath bloks On-delay 1 N/O + 1 N/C Off-delay 1 N/O + 1 N/C LAD T LAD S LAD R LAD 6K10 56 55/NC 68 67/NO 56 55/NC 68 67/NO 58 57/NO 66 65/NC A A1 E E1 Charateristis : pages 456/ to 456/5 Illustrations: page 455/ Referenes : pages 455/3 to 455/5 Shemes : page 4537/3 4537-EN_Ver6.0.indd 3