Operating Manual Smart Control SC16 3-Channel for matrix
Dear Customer, Thank you for choosing a WALTRON daytime lighting controller. Your daytime lighting controller is a high-quality product that was specially designed, along with the daytime LED lighting line, for aquatic and aquarium applications. It satisfies the most demanding safety requirements. The features of this daytime product are described in detail in the following chapters. Please read the operating manual carefully and completely. We would be happy to answer any questions that you may have. The entire team at WALTRON wishes you a "bright" future with our daytime lighting! Notice, warning and safety symbols The European Standard prescribes the use of the following symbols for specific situations; they are not intended to unsettle the user. They are a part of modern operating manuals for any electrically operated appliance. General description: Warning! Serious injuries can result from an electric shock if you do not follow the information marked by this symbol. Info Sections marked by this symbol contain helpful recommendations and tips for using the daytime products. Notice! The daytime products may malfunction or be damaged if the information marked by this symbol is not observed. Information for disposing of the product in an environmentally responsible manner Compliance with EC directives
Proper and intended usage This product is designed for private household usage. It may only be used to control WALTRON GmbH's daytime LED lighting systems for aquariums and terrariums. Read and observe this entire operating manual before using the lighting controller for the first time. The warranty does not cover damage or defects which have resulted from not observing the information in the operating manual. Keep this operating manual accessible near the device. Make sure that it is given to any subsequent users. WALTRON assumes no liability for the consequences of improper usage. For your safety Warning! Carefully read and observe the following important safety information. In order to avoid an electric shock: Position the device in a suitable place to ensure that it is not exposed to water (from condensation or falling into water). Info WALTRON recommends making "drip loops" in the converter cables to prevent water (condensation) from running along the cable to the converter or outlet. Notice! Make sure that all cables: have no kinks in them, are not routed over sharp edges, cannot be jammed or snagged, and cannot come into contact with hot surfaces (> 60 C). Warning! If you notice that the power cable is damaged, disconnect the device from mains power supply immediately. Contact an authorized daytime service partner or the manufacturer (WALTRON GmbH) directly. Warning! If the operating device's power cable or secondary cable(s) are damaged, they must be repaired, either by an authorized daytime service partner or directly by the manufacturer. Never use a device which has a damaged or defective power cable (operating device). Warning! Never open or repair the operating devices and lights by yourself. Do not make any changes which are not described in these operating instructions. The operating device contains live (current-carrying) parts (with 230 V AC). A fatal injury can result from an opened device. Repairs may only be made by authorized daytime service partners or by Waltron, using only original spare parts and accessories.
Scope of delivery 1 lighting controller: Smart Control SC16 three-channel for matrix 1 operating manual The daytime SC16 Android app can be downloaded free at www.daytime.de Optional accessories Single-channel performance extension module SEM16, for eco & cluster Three-channel performance extension module SEM16, for cluster control Three-channel performance extension module SEM16, for matrix Features & functions Sunrise, sunset, dusk (morning and evening), midday reduction, etc. simulating natural lighting conditions and changes, with up to ten programmable switching or dimming times Can be conveniently and securely programmed using Android smartphones and tablets (an ios app is planned). Smoothly dims with virtually no "jumps" over the entire range of brightness Individually adjustable lighting scenarios for each day or night time Clouds and storms weather simulations can be selected in three intensity levels Demonstration mode with constantly changing scenarios Manually change the lighting characteristics in real time using the slider Moving clouds and lightning at the press of a button weather simulation can be triggered manually Professional "Plug & Play" connector system manufactured by Binder the controller is simply inserted between the converter and the lighting: can also be retrofit! Operates the daytime matrix lighting with up to 240 watts (24 matrix modules) Parallel/combined operations for all daytime lighting products is possible when using the corresponding optional SEM16 performance extension module. An app can be used to conveniently update the software at home.
Device overview and explanation RJ11 socket Outlet for the SEM16 performance extension module Status LED Green -> automatic mode (not connected) Green blinking -> active scenario change Red -> manual mode (Bluetooth connection) 5-pin plug (for 24V converter connection) 5-pole socket (for connecting light or distributor) Overview of the daytime SC16 app start page Current status Sliders
1. Setup and initial usage Install the daytime SC16 app (download and instructions can be found at www.daytime.de). All electrical connections and components (except for the power plug) should be connected according to the following examples. Observe any relevant safety instructions! Example with one converter and one daytime matrix light, with an output of max. 240 watts: Example with one converter, one two-way splitter (optionally available), and two daytime matrix lights, with a total output of max. 240 watts:
Example with multiple converters, SEM16 performance extension modules three-channel for matrix (optionally available) and multiple daytime matrix lights, each with an output of max. 240 watts: Plug in the mains power plug or switch on the power supply/supplies. The SC16's status LED illuminates green. The controller is ready for operations. It switches to automatic mode. Info: The factory settings are used to specify the daily routine during the initial startup. BLUETOOTH pairing between the SC16 and an Android device (smartphone, tablet, etc.) NOTICE: Observe the documentation and user manual for the Android device. Enable BLUETOOTH on the Android device. Start the search (scan) for "available devices". After the device has been found, SC16_XXX will be listed under "Available devices" (XXX signifies the sequential serial number.) Select the device for pairing. The PIN code request will then appear. Enter the PIN number 1234 and confirm with OK. The daytime SC16 light controller will now appear under the list of "Connected devices".
2. Connect the controller with the Android device Open the SC16 app and click on "Connect". The list of paired devices will then be shown. Select/click on the corresponding SC16. The controller's status LED illuminates in red; this indicates manual mode. The time is automatically synchronized. 3. Manual operations You can use the sliders (WHITE, BLUE, RED) to adjust the brightness or the intensity for each light colour separately. Info: If the matrix modules are being used without the red LED, then the RED slider will have no function or influence. This also applies to the WHITE and BLUE sliders. Click on the Cloud icon to start a random cloud simulation (which will last about 30 seconds). The slider is not enabled during manual operations. Click on the Lightning icon to start a random thunderstorm simulation (which will last from 5 10 seconds). The slider is not enabled during manual operations.
4. Programming You can create and save a lighting configuration "scenario" for each time of day. Your saved scenarios are inserted in the "Daily routine" table along with their specific start and end times. The time gap between a scenario's "Time to" and the "Time from" specified for the next scenario define the duration for the change (for sunrise or sunset). The change takes place uniformly (linearly). 4.1 Creating and saving scenarios Use the sliders to adjust the brightness, light colour, clouds and thunderstorm intensity. Then click on "Store scenario". Then specify a name (e.g. Day) and confirm by clicking on OK. Any number of scenarios can be created and saved. The saved scenarios can be opened, changed and re-saved by clicking on the button corresponding to the scenario.
4.2 Creating and saving a daily routine Click on "Programming" and then on "Create daily routine".
Add your desired scenarios and define the times in the daily routine table by clicking on the associated buttons, as shown in the example below. Once a line is completely filled out, it is displayed with a dark grey background (as shown below, bottom left). Then save (not yet send) the completed table by clicking on the "Store daily routine" button. Any number of daily routines can be created and saved. To transmit a daily routine, click on "Open daily routine". Then select the desired routine and click on "Send daily routine" (the controller must be connected to the Android device for this to work). Note: The table cannot be filled out when no scenarios have been saved. The change of day (midnight / 0:00) must be included in the last scenario (see the illustration below) or within the interval between the end of the last scenario and the start of the first scenario (for example: the last scenario ends at 23:00 and the first scenario starts at 04:30).
Explanations A daily routine corresponds to 24 hours and is repeated continuously. Up to 10 scenarios can be inserted into a daily routine. The duration for the continual change (sunrise, sunset, etc.) is derived from the time interval starting at "Time to" of a scenario and ending at the "Time from" for the next scenario. This time interval must be at least one minute! After the last scenario, the routine starts again with scenario 1. The duration for this changeover is determined by the difference between the "Time to" for the last specified scenario and the "Time from" for scenario 1. Click on the Previous buttons to get back to the Start menu and then click on Disconnect. The connection is then terminated. The controller's status LED illuminates green to signal that automatic mode is running according to the specified and transmitted daily routine.
5. Demo mode The demo mode is enabled by clicking on the corresponding button on the Start page (the app must be connected to the controller). When demo mode is enabled, the button will display "Demo running". The controller continuously switches, in fast-motion time lapse, between the scenarios specified in the daily routine. (Clouds and lightning are disabled in demo mode) The demo mode remains switched on until you click again on the "Demo mode" button, even if the controller disconnects from the app. If the controller has been disconnected, you will need to reconnect and click twice on the "Demo mode" button to stop demo mode. After you click on "Demo running" to stop demo mode, the active changeover will be completed. In rare cases, the controller must be disconnected from the power supply and then reconnected.
6. System settings In this menu, the name of the controller can be changed, the software can be updated, and the daily routine can be reset to the factory default settings. Click on "Programming" and then "System settings" to access this screen.
Confirm the following message by clicking on "OK". Then click "Connect".
The following screen displays the actual name of the controller in the "Module name" field. The software and hardware version numbers are also shown here.
6.1 Changing the name of the controller (the module name) Click on "Rename control". The screen shown below then appears. Specify a new name (e.g. lounge aquarium, test aquarium, etc.) and confirm by clicking OK. The new name will be shown after you disconnect and reconnect.
6.2 Restoring the factory default settings Click on "Factory settings". The next screen will show the daily routine table corresponding to the factory settings in the background. Click on "OK" to confirm that you wish to load the factory settings. Note: Only the values for the daily routine are specified in the factory settings. The name of the controller (the module name) will not be reset.
6.3 Factory default settings: Scenario "Day" from 9:00 to 20:00 White: 100% Blue: 100% Red: 100 % Cloud: 0 (Off) Thunderstorm: 0 (Off) Scenario "Night" from 21:00 to 08:00 White: 0% Blue: 0% Red: 0% Cloud: 0 (Off) Thunderstorm: 0 (Off) 6.4 Updating the software We are constantly striving to improve our daytime products. You can always find the most up-todate operating software, containing all current optimizations, at www.daytime.de. A guide to updating the software is also available at this link. 7. Technical specifications Dimensions L/W/H (without connecting cables): 125 x 37 x 26 mm Length of connecting cables (primary / secondary): approx. 90 mm (including plug and socket) Weight: Operating voltage: Max. capacity: Wireless transmission type: Protection degree: approx. 100 g 24 VDC (safety extra low voltage) 24 matrix LED-modules BLUETOOTH Classic BLUETOOTH LE IP20
Further information and advice For each step there are video instructions. - channel where these instruc- At our website www.daytime.de you will find a link to our tions are clearly arranged. Furthermore local daytime retailers and our technical support staff will be pleased to give you detailed answers via e-mail or by phone. Warranty notice We have a 24 month warranty for daytime products that we deliver within the EU. Exceptions are damages due to non-compliance with the operating manual or other improper handling. If, contrary to expectations, you have grounds for a complaint within this warranty period, please fill out and submit the enclosed warranty card to your nearest daytime dealer. daytime a trademark of: Sapelloh 51 31606 Warmsen, Germany Tel.: +49 (0) 5767 / 941 439 0 Fax: +49 (0) 5767 / 941 493 15 BA-SC16 three-channel for matrix E-mail: info@waltron-gmbh.com 92-0007 V.08 www.daytime.de www.waltron-gmbh.com We reserve the right to make changes. We assume no liability for printing errors.