HDSP-7xE 17.3 mm (.8 inch) General Purpose x7 Dot Matrix Alphanumeric Displays Data Sheet HDSP-7xE Series, HDSP-71xE Series HDSP-7xG Series, HDSP-71xG Series HDSP-7xA Series, HDSP-71xA Series Description These displays have a 17.3 mm (.8 inch) character height and use industry standard size and pin-out. The devices are available in either common row anode or common row cathode configurations. The displays come in either gray or black face paint and are available in a choice of high efficiency red (HER) or green colors or. These parts are subjected to Outgoing Quality Assurance (OQA) inspection with an AQL of.% for functional and visual/cosmetic defects. For optimal intensity performance, please consider our industrial grade displays: HDSP-Lx HDSP-x HDSP-L1x Features x 7 dot matrix font Viewable up to 1 meters X-Y stackable Industry standard pin-out 7. mm (.3 in.) Dual-in-Line (DIP) leads on. mm (.1 in.) centers Choice of colors Red or Green or Choice of face paint colors Gray or black Design flexibility Common row anode or common row cathode Categorized for luminous intensity Green categorized for color Applications Suitable for indoor use Not recommended for industrial applications, i.e., operating temperature requirements exceeding 8 C or Below - C [1] Extreme temperature cycling not recommended [] HER HDSP- Green HDSP- HDSP- Description 71E 71G 71A 17.3 mm Gray Surface Common Row Anode 73E 73G 73A 17.3 mm Gray Surface Common Row Cathode 711E 711G 711A 17.3 mm Black Surface Common Row Anode 713E 713G 713A 17.3 mm Black Surface Common Row Cathode 1. For details, please contact your local Avago components sales office or an authorized distributor.
Package Dimensions.3 (.) 1.7 (.) MAX. 1.1 (.). (.1) 1.3 (.) PIN 1. (.1) 1.7 (.) 17.78 (.7) MAX.. (.1) 1. (.) PART NO. PIN 3 1.9 (.7) COL 1 3 ROW 1 3 8 1.8 8 3 (.118) 8. (.98).1 ±. (.1) 1. (.) 7 7. (.3) Internal Circuit Diagram NOTES: 1. ALL DIMENSIONS IN MILLIMETERS (INCHES).. UNLESS OTHERWISE STATED, TOLERANCE IS ±. mm (.1). 3. FOR GREEN ONLY. COMMON ANODE ROW COLUMN 1 3 1 3 1 7 8 ROW 1 1 11 3 7 9 COMMON CATHODE ROW COLUMN 1 3 3 7 9 1 ROW 1 1 3 11 1 7 8 COMMON ROW ANODE COMMON ROW CATHODE HDSP-71E/711E/ PIN 71G/711G/71A/711A PIN HDSP-73E/713E/ 73G/713G/73A/713A 1 COLUMN 1 CATHODE ROW 3 ANODE 3 COLUMN CATHODE ROW ANODE ROW ANODE ROW 7 ANODE 7 COLUMN CATHODE 8 COLUMN CATHODE 9 ROW ANODE 1 COLUMN 3 CATHODE 11 ROW ANODE 1 ROW 1 ANODE 1 ROW 1 CATHODE ROW CATHODE 3 COLUMN ANODE COLUMN 1 ANODE ROW CATHODE ROW 7 CATHODE 7 COLUMN 3 ANODE 8 ROW CATHODE 9 COLUMN ANODE 1 ROW CATHODE 11 ROW 3 CATHODE 1 COLUMN ANODE x = ROW OR COLUMN NUMBER, x = PIN NUMBER
Absolute Maximum Ratings at T A = C HER Green HDSP-71E/ HDSP-71A/ HDSP-71G/ Parameter 711E/73E/ 73A/711A/ 711G/73G/ 713E 713A 713G Units Average Power per Dot [1] 7 7 7 mw Peak Forward Current per Dot [1,] 9 1 9 ma (1/1 Duty Cycle,.1 ms Pulse Width) Average Forward Current per Dot [1] 3 3 [3] 1 [] ma Reverse Voltage per Dot V Operating Temperature to +8 to +8 to +8 C Storage Temperature to +8 to +8 to + 8 C Wave Soldering Temperature for 3 seconds [3] C (1. mm [.3 in.] below Body) 1. Do not exceed maximum average current per dot.. Derate above 3 C at. ma/ C. 3. Not recommended to be soldered more than times. Minimum interval between solderings is 1 minutes. Total soldering time not to exceed seconds. Optical/Electrical Characteristics at T A = C High Efficiency Red Test HDSP- Parameter Symbol Min. Typ. Max. Units Conditions 71E 711E 73E 713E Luminous Intensity/Dot I V 1.89. mcd I F = ma, (Digit Average) [1] % Duty Factor Peak Wavelength l PEAK 3 nm I F = ma Dominant Wavelength [] ld nm I F = ma Forward Voltage V F 3. V I F = ma.. I F = ma 1. I F = ma Reverse Voltage [3] V R V I R = 1 µa Luminous Intensity I V-M :1 I F = ma Matching Ratio % Duty Factor 3
Optical/Electrical Characteristics at T A = C, continued Green Test HDSP- Parameter Symbol Min. Typ. Max. Units Conditions 71G 711G 73G 713G Luminous Intensity/Dot I V.9. mcd I F = ma, (Digit Average) [1] % Duty Factor Peak Wavelength l PEAK 8 nm I F = ma Dominant Wavelength [] ld 73 nm I F = ma Forward Voltage V F 3. V I F = ma 1.8.. I F = ma 1. I F = ma Reverse Voltage [3] V R V I R = 1 µa Luminous Intensity I V-M :1 I F = ma Matching Ratio % Duty Factor Test HDSP- Parameter Symbol Min. Typ. Max. Units Conditions 71A 711A 73A 713A Luminous Intensity/Dot I V 1..1 mcd I F = 1 ma, (Digit Average) [1] % Duty Factor Peak Wavelength l PEAK nm I F = ma Dominant Wavelength [] ld 3 nm I F = ma Forward Voltage V F 1.8. V I F = ma. I F = 1 ma 1. I F = ma Reverse Voltage [3] V R V I R = 1 µa Luminous Intensity I V-M 1.:1 I F = 1 ma Matching Ratio % Duty Factor 1. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.. The dominant wavelength, ld, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 3. Typical specification for reference only. Do not exceed absolute maximum ratings.
I DC MAXIMUM DC CURRENT PER SEGMENT ma 3 3 1 1 GREEN, HER 8 1 T A AMBIENT TEMPERATURE C I F FORWARD CURRENT PER SEGMENT ma 9 8 7 3 1 1 GREEN HER 3 V F FORWARD VOLTAGE V Figure 1. Maximum Allowable Average Current Per Dot vs. Ambient Temperature. Figure. Forward Current vs. Forward Voltage. RELATIVE LUMINOUS INTENSITY (NORMALIZED AT ma). 3. 3... 1. 1.. GREEN, HER 1 1 3 3 I F DC FORWARD CURRENT ma Figure 3. Relative Luminous Intensity vs. DC Forward Current. η V RELATIVE EFFICIENCY (NORMALIZED TO/AT 1 ma PER SEGMENT) 1. 1.3 1. 1.1 1..9.8 RED GREEN 1 3 7 8 9 1 I PEAK PEAK FORWARD CURRENT PER SEGMENT ma Figure. Relative Efficiency (Luminous Intensity Per Unit Current Per Dot) vs. Peak Current Per Dot.
Intensity Bin Limits [1] (mcd at ma, % Duty Factor) High Efficiency Red Green Bin name Min. [] Max. [] E 1.89 1.93 F 1.93.9 G.9.3 H.3. Bin name Min. [] Max. [] H.9 1. I 1..1 J.1 3.3 K 3.3.8 L.8 7.8 1. Bin categories are established for classification of products. Products may not be available in all bin categories.. Tolerance for each intensity bin limit is ±1%. (mcd at 1 ma, % Duty Factor) Bin name Min. [] Max. [] I 1..33 J.33 3.9 1. Bin categories are established for classification of products. Products may not be available in all bin categories.. Tolerance for each intensity bin limit is ±1%. Color Bin Limits (Dominant Wavelength) Dominant Wavelength (nm) Color Bin Min. Max. Green 73. 7. 3 7. 73. 7. 7.. 7. Note: All categories are established for classification of products. Products may not be available in all categories. Please contact your local Avago representatives for further clarification/information. Contrast Enhancement For information on contrast enhancement, please see Application Note 11. Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloro-ethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts. For information on soldering LEDs, please refer to Application Note 17. Device Reliability For reliability information, please see the reliability datasheet 17.3 mm General Purpose x 7 Dot Matrix Alphanumeric Displays. For product information and a complete list of distributors, please go to our website: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries. Data subject to change. Copyright Avago Technologies Limited. All rights reserved. Obsoletes 988-8EN AV-EN - May 3, 7