Lightbar Series PLCC 5050 Hunter Lightbar IP20 Datasheet Features : High Brightness SMD LED Low Power Requirement & Energy Efficient Suitable for Restricted Space Typical Applications : Auditorium Walkway Lighting Stairway Accent Lighting Cabinet Lighting Copyright 2019 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 1
Table of Contents General Information...3 Mechanical Dimensions...4 Absolute Maximum Ratings...5 Electric-Optical Characteristics (T a =25 C)...6 Assembly instructions...7 Product Packaging Information...10 Precaution for Use...11 Environmental Compliance...11 Application Notes...11 Revision History...12 About Edison Opto...12 Copyright 2019 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 2
General Information Introduction High efficiency Lightbar is a strip of lighting module available in varying colors. Its flexible circuit board not only enables novel design thinking with bendable light source, but also offers a wide range of applications with dividable lighting segments. Ordering Code Format 6 LBR2 xx x x0 x xxx xx X1 X2 X3 X4 X5 X6 X7 X8 X1 X2 X3 X4 X5 Item Series Emitting Color Driver Length 6 Module LBR2 FPC CW Cool White I CV E0 5.0M NW Neutral White J CV WW M1 Warm White RGB X6 X7 X8 Emitter Number of LEDs (M) Serial No. M 5050 060 60pcs xx -- Copyright 2019 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 3
DC R1 R2 R3 DC DC R4 R5 R6 DC DC R7 R8 R9 DC DC R10 R11R 12 DC DC R13 R14R 15 DC Mechanical Dimensions 5050-60LED/M Series Dimensions (CV IP20) 150.00±5.00 100.00±0.25 5000.00±10.00 10.00±0.35 Adhesive tape for mounting 2.4±0.25 0.45±0.05 5050-60LED/M Series Dimensions (CV IP20) 150±5.00 50.00±0.25 5000.00±10.00 10.00±0.35 Adhesive tape for mounting 2.4±0.25 0.45±0.05 5050 RGB-60LED/M Series Dimensions (CV IP20) 150±5.00 5000±10.00 100.00±0.25 DC DC 10.00±0.25 2.4±0.25 0.45±0.05 Notes: 1. All dimensions are in millimeters. 2. Tolerance is ±0.20 mm Copyright 2019 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 4
DC R1 R2 R3 DC DC R4 R5 R6 DC DC R7 R8 R9 DC DC R10 R11R 12 DC DC R13 R14R 15 DC DC R1 R2 R3 DC DC R4 R5 R6 DC DC R7 R8 R9 DC DC R10 R11R 12 DC DC R13 R14R 15 DC 5050 RGB-60LED/M Series Dimensions (CV IP20) 150±5.00 5000±10.00 50.00±0.25 DC DC 10.00±0.25 Adhesive tape for mounting 2.4±0.25 0.45±0.05 Absolute Maximum Ratings Parameter Symbol Value Units Thermal Measurement Point (Ta= 25 C) T c 75 C Operating Temperature T opr -20 ~ +45 C Storage Temperature T s -25 ~ +60 C Number of FPC Connection - 5 M Notes: 1. Proper current derating must be observed to maintain junction temperature below the maximum at all time. 2. LEDs are not designed to be driven in reverse bias. 3. Strongly recommended one power connection one set FPC, If over two set FPC recommended connection power between two FPC (Drawing). 4. If use under bending condition, bending position should avoid area of resistance, diode or triode and the bend angle couldn t be less than 45 o for long time. 5. It can not be bent during Temperature 0 degree and below. 5000.00±10.00 5000.00±10.00 Power Copyright 2019 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 5
Electric-Optical Characteristics (T a =25 C) 5050/-60LED Series Order Code 6LBR2WWIE0M06002 Color Warm White CCT (K) Input Voltage (CV) Number of LEDs (M) Power (W/M) LED lm(m) 2700K 12 60 14.4 980lm 80 20 3000K 12 60 14.4 1040lm 80 20 CRI IP 6LBR2NWIE0M06002 Neutral White 4000K 12 60 14.4 1100lm 80 20 6LBR2CWIE0M06002 Cool White 5700K 12 60 14.4 1160lm 80 20 5050/-60LED Series Order Code 6LBR2WWJE0M06002 Color Warm White CCT (K) Input Voltage (CV) Number of LEDs (M) Power (W/M) LED lm(m) 2700K 24 60 14.4 980lm 80 20 3000K 24 60 14.4 1040lm 80 20 CRI IP 6LBR2NWJE0M06002 Neutral White 4000K 24 60 14.4 1100lm 80 20 6LBR2CWJE0M06002 Cool White 5700K 24 60 14.4 1160lm 80 20 5050 RGB-60LED Series Order Code Color CCT (nm) Input Voltage (CV) Number of LEDs (M) Power (W/M) LED lm(m) IP R:620~635 R:100lm 6LBR2M1IE0M06001 RGB G:520~535 12 60 14.4 G:250lm 20 B:460~475 B:60lm R:620~635 R:100lm 6LBR2M1JE0M06001 RGB G:520~535 24 60 14.4 G:250lm 20 B:460~475 B:60lm Note: 1. The maximum and minimum lumen flux are based on ± 10% of the typical rate. 2. The maximum and minimum inout power are based on ± 10% of the typical rate 3.CCT is measured with an accuracy of ± 10% Copyright 2019 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 6
Assembly instructions Silicon strip cutting Assembly Instructions 1. Insert the wire into connector. Remar:Check the Anode and Cathode. 2. Fix the connector by tool. 3. Finish. Lamp belt butt joint indication 1.Meansure the length per series, and cut it. 2. Tear up one small parts of the 3M tape. 3. Open the connector to 90degree, (and insert the wire to connector tightly), no need to peel off the silicon tube. 4. Fix the connector by tool. 5. Follow same way as 3 for another side. Remark:Check the Anode and Cathode. when connecting strip. Copyright 2019 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 7
Wire connection beckoned 1. Insert the wire into connector. Remar:Check the Anode and Cathode. 2. Fix the connector by tool. 3. Finish. Lamp belt butt joint indication 1.Meansure the length per series, and cut it. 2. Tear up one small parts of the 3M tape. 3. Open the connector to 90degree, (and insert the wire to connector tightly), no need to peel off the silicon tube. 4. Fix the connector by tool. 5. Follow same way as 3 for another side. Remark:Check the Anode and Cathode. when connecting strip. Copyright 2019 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 8
Accessory Wire connection(13cnd1000005/13cnd1000007) dimension 13CND1000005 Dimensions 5.00 10.20 19.55 14.60 7.70 13CND1000007 Dimension 2.40 7.70 24.27 10.20 7.20 14.60 7.20 Docking terminal(13cnx1000014/13cnx1000016) dimension 13CNX1000014 Dimensions 5.00 10.20 24.30 14.60 7.70 13CNX1000016 Dimension 7.68 7.20 Notes: 1. All dimensions are in millimeters. 2. Tolerance is ±0.10 mm 2.40 10.20 19.55 14.60 7.00 Copyright 2019 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 9
Product Packaging Information PLCC Lightbar FPC Material Description Package Type Part NO. 6LBR2xxxE0x060xx Dimension Antistatic bag 1 Reel 260mm x 230mm Inside box 4 Antistatic bags 240mm x 235mm x 67mm Outside box 10 Inside boxes 488mm x 364mm x 261mm 230mm 260mm 67mm Label 240mm 235mm EX: Part No. Color Quantity Lot No. 6LBR2CWJE0M06002 Cool White(573) 1 Reel(5M) D1201-12110022 364mm Label information Part NO. : Order code Color : Color(Emitter BIN color) Quantity : The number of packing Lot NO. : Date code 261mm 488mm Copyright 2019 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 10
Precaution for Use 1. DO NOT use the products with materials containing Sulfur. 2. DO NOT cut the products and make connector assembly in humid environment or the conditions of containing oxidizing gas such as Cl, H2S, NH3, SO2, NOX, etc. Environmental Compliance PLCC lightbar FPC series are compliant to the Restriction of Hazardous Substances Directive or RoHS. The restricted materials including lead, mercury cadmium hexavalent chromium, polybrominated biphenyls (PBB) and polybrominated diphenyl ether (PBDE) are not used in PLCC lightbar FPC series to provide an environmentally friendly product to the customers. Application Notes PLCC Lightbar series are available in red, yellow, green, blue, white, neutral white and warm white for application such as under-cabinet lighting, cove lighting and wall washing. Moreover, additional fine-tuned high color rendering index (CRI) version of white, neutral white and warm white all make PLCC Lightbar the ideal lighting choice for vividly building or decoration products, presenting the products outline. Copyright 2019 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 11
Revision History Versions Description Release Date 1 Establish order code information 2017/10/20 2 Revise Absolute Maximum Ratings Value Revise Cutting Assembly Instructions Picture Revise Precaution for Use Information 2018/1/9 3 Add 5050 RGB Lightbar specifications 2018/10/16 4 Revise 5050 RGB Lightbar number 2019/1/17 About Edison Opto Edison Opto is a leading manufacturer of high power LED and a solution provider experienced in LDMS. LDMS is an integrated program derived from the four essential technologies in LED lighting applications- Thermal Management, Electrical Scheme, Mechanical Refinement, Optical Optimization, to provide customer with various LED components and modules. More Information about the company and our products can be found at Copyright 2019 Edison Opto. All rights reserved. No part of publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photo copy, recording or any other information storage and retrieval system, without prior permission in writing from the publisher. The information in this publication are subject to change without notice. For general assistance please contact: service@edison-opto.com.tw For technical assistance please contact: LED.Detective@edison-opto.com.tw Copyright 2019 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 12