MMD3HSM The MMD3HSM is a passive double balanced MMIC doubler covering to 3 GHz on the output. It features excellent conversion loss, superior isolations and harmonic suppressions across a broad bandwidth, in a small form factor. The MMD3HSMSM is available in a lead-free, RoHS compliant QFN surface mount package and is compatible with standard leaded and lead-free PCB reflow soldering processes. The MMD3HSM is a superior alternative to Marki Microwave carrier and packaged doublers. Features Compact 3mm QFN SMT Style Package Broadband Performance Excellent Unit-to-Unit Repeatability RoHS Compliant Electrical Specifications - Specifications guaranteed from -55 to + C, measured in a 5Ω system. All bare die are % DC tested and % visual inspected. RF testing is performed on a sample basis to verify conformance to datasheet guaranteed specifications. Consult factory for more information. Parameter Input Output Min Max Diode Option (GHz) (GHz) Input drive level (dbm) 2F (out) Conversion Loss (db) 5-5 -3 2 Suppressions F (in) Fundamental 34 3F (out) Third Harmonic 46 4F (out) Fourth Harmonic 9 Isolations F (in) Fundamental 46 3F (out) Third Harmonic 57 4F (out) Fourth Harmonic 3 F Input Level + +4 +7 H-Version Suppression is relative to doubled output power. Isolation is defined as relative to the fundamental input power. Part Number Options Model Number MMD3HSM Description Surface Mount EVAL-MMD3H Connectorized Evaluation Fixture Note: For port locations and I/O designations, refer to the drawings on page 2 of this document. 25 Vineyard Court, Morgan Hill, CA 9537 Ph: 48.778.42 Fax 48.778.43 info@markimicrowave.com
Page 2 MMD3HSM Input 5 to 5 GHz Output to 3 GHz Suppression IN F 2F OUT F F 2F 3F 4F ical Performance -3-4 -5-6 -7-8 -9 Harmonic Isolations (db) Relative to F Input F 2F 3F 4F 4 5 6 7 8 9 2 3 4 5 6 7 - -2-3 -4-5 -6-7 -8-9 2F Output Conversion Loss (db) vs. Input Power +5 dbm Input +3 dbm Input +2 dbm Input + dbm Input + dbm Input +9 dbm Input 8 2 4 6 8 2 22 24 26 28 3 32 34 2F Output Frequency (GHz) 2F Output Converion Loss (db) Relative to F Input F Output Suppression (dbc) Relative to 2F Output -3-4 -5-3 -4-6 -5-7 4 5 6 7 8 9 2 3 4 5 6 7-6 4 5 6 7 8 9 2 3 4 5 6 7
Page 3 MMD3HSM Input 5 to 5 GHz Output to 3 GHz ical Performance (cont.) 3F Harmonic Output Suppression (dbc) Relative to 2F Output 4F Harmonic Output Suppression (dbc) Relative to 2F Output -3-3 -4-4 -5-5 -6 2 4 6 8 2 22 24 26 28 3 32 34 3F Output Frequency (GHz) -6 6 8 2 22 24 26 28 3 32 34 4F Output Frequency (GHz) F Input Return Loss (db) 2F Output Return Loss (db) -5-5 -5-5 -25 4 5 6 7 8 9 2 3 4 5 6 7-25 8 2 4 6 8 2 22 24 26 28 3 32 34 2F Output Frequency (GHz)
Page 4 MMD3HSM Input 5 to 5 GHz Output to 3 GHz.4 [2.9].3 [.8] PROJECTION INCH [MM].3 [.32].4 [2.9] MDH 622 XXYY.59 [.5] 9 8 7 6 2 Ground Paddle 5 4 2 3.2 [.5].2 [.3] Pad # 2 3 4 5 6 7 8 9 2 Function F In 2F Out.3 [.78] Outline Drawing 3mm QFN package Substrate material is Ceramic. I/O Leads and Ground Paddle are.4+.6 microns (55+24 micro-inches) Au over.3 microns (5 micro-inches) Ni. All unconnected pads should be connected to PCB RF ground....3.4.6.8.92.2.22...3.4.6.8.92.2.22.3.2.28.2 Ø. Plated Thru Hole, 23 PL QFN-Package Doubler Surface-Mount Landing Pattern Click here for a DXF of the above layout. Click here for leaded solder reflow. Click here for lead-free solder reflow.
Page 5 MMD3HSM Input 5 to 5 GHz Output to 3 GHz Port Description DC Interface Schematic F Input The input port is DC open and AC matched to 5 Ohms from 5 to 5 GHz. Blocking capacitor is optional. F 2F Output The output port is DC open and AC matched to 5 Ohms from to 3 GHz. Blocking capacitor is optional. 2F Input DC Current Output DC Current RF Power Handling Operating Temperature Storage Temperature Parameter Absolute Maximum Ratings Maximum Rating N/A N/A +25 dbm at +25 C, derated linearly to +2 dbm at + C -55ºC to +ºC -65ºC to +25ºC DATA SHEET NOTES:. Doubled Loss typically degrades less than.5 db at + C and improves less than.5 db at -55 C. 2. Unless otherwise specified, H-Diode data is taken with a +4 dbm input. 3. Specifications are subject to change without notice. Contact Marki Microwave for the most recent specifications and data sheets. 4. Catalog doubler circuits are continually improved. Configuration control requires custom model numbers and specifications. Marki Microwave reserves the right to make changes to the product(s) or information contained herein without notice. Marki Microwave makes no warranty, representation, or guarantee regarding the suitability of its products for any particular purpose, nor does Marki Microwave assume any liability whatsoever arising out of the use or application of any product. Marki Microwave, Inc. 25 Vineyard Court, Morgan Hill, CA 9537 Ph: 48.778.42 Fax 48.778.43 info@markimicrowave.com www.markimicrowave.com