www.osram.com It s important to stand out from the crowd. LED systems for illuminated advertising.
LED ILLUMINATED ADVERTISING 2
The LED range from OSRAM. A new dimension in illuminated advertising. LED modules from OSRAM have revolutionised illuminated advertising. They are small, compact, reduce costs and give the cold shoulder to wind and weather. Lettering and logos lit with LED technology are extremely robust and present companies in a new light. FIVE GOOD REASONS FOR LEDS 3
1 2 Reduced costs. Compared with high-voltage cold cathode lamps (neon, argon, krypton), LED installations are more economical. While cold cathode lamps and the corresponding control gear have to be replaced at least once during the average usage time of 35,000 hours (8 years at 12 hours a day) because of the faster loss of luminous fl ux and higher failure rates, LED installations are virtually maintenance-free. Moreover, thanks to their higher effi ciency and the associated lower energy consumption, LED installations reduce overall costs. Additionally, for lettering and logos backlit with red, orange and yellow light, the investment costs of the system are in most cases already lower than those for neon technology. Resistance to moisture and low temperatures. LED systems from OSRAM can withstand extreme weather conditions. For modules used outdoors within closed illuminated lettering, the best protection against corrosion through salty condensation is provided by a special, transparent protective coating. This is confi rmed by a long-term salt spray test (according to IEC 60068-2-52), which all the OSRAM BACKlight modules have completed successfully. In contrast to cold cathode lamps or fl uorescent tubes, they can be used in a temperature range from -25 C to +75 C and provide constant light even in continuous operation. 4 Saturated colours and optimum illumination. Coloured LEDs produce light with just one wavelength, which is how they achieve their impressive colour saturation and exceptional brightness. Thanks to their small size, OSRAM LED modules can be installed even in narrow lettering, thus avoiding unsightly shadows and borders for absolutely uniform illumination. 4
FIVE GOOD REASONS FOR LEDS 3 Simple assembly and installation. LED modules from OSRAM can be easily fi tted in illuminated lettering because of the compact size of the LEDs, their low weight and their fl exible materials. The long BACKlight chains with their fl exible connection cables offer considerable savings in terms of time and therefore costs in installing the modules from the reel. Electrical installation involves just one central power supply for up to 14.4 metres of light. This means there is no need for time-consuming preparation work. The BL-T adhesive base makes things even easier and quicker: just stick it in the open letters and the job is done. Lighting design has never been so easy. OPTOTRONIC control gear together with the LED modules from OSRAM form a perfectly matched system, guaranteeing optimum quality and operating reliability. All system components are developed within OSRAM to ensure optimum compatibility. The system concept goes much further than this though. One OPTOTRONIC OT 50 for example is suffi cient to operate 60 BACKlight modules BL02 or 30 BACKlight modules BL04 (= one reel each), irrespective of the LED light colour. 5 New design. Thanks to their special design, LED modules from OSRAM fi t closely into narrow lettering, sharp angles and tight curves, opening up design opportunities that are impossible with conventional light sources. Thanks to the LEDs low thermal output and wide light beam angle, acrylic covers can be fi t- ted closer to the LEDs themselves. This makes the letters shine brighter and gives them clearer outlines. Playing it safe with SELV. SELV (Safety Extra-Low Voltage) ensures electrical isolation between the primary side and the secondary side: Protection against accidental contact with all electrical parts Safe operation Simplifi ed assembly 10 V or 24 V low-voltage operation High breaking strength. Robust construction means no risk of breakage during storage, transport and installation: No fi laments No glass No electrodes 5
OSRAM BACKlight Stunning curves with BACKlight modules from OSRAM. Their strength lies in their noticable effect and efficiency: the new generation of BACKlight modules is a shining light in illuminated advertising. These modules are ideal for backlighting dispersing materials and are available in two sizes: BL02 with 2 LEDs per board is ideal for small lettering thanks to its narrow width. BL04 has 4 LEDs per board for greater luminance and is perfect for backlighting large areas. 6
OSRAM BACKlight BACKlight BL02 Only 12 mm wide and therefore ideal for mounting in small and narrow lettering One reel comprises two LED chains, each consisting of 60 boards with two LEDs each Depending on the model, the maximum overall length is 2 x 4.8 m = 9.6 m or 2 x 7.2 m = 14.4 m Colours: super red, red, orange, yellow, green, blue, white Optimally compatible with OPTOTRONIC 10 V for outdoor use with IP6X protection NEW BL02L-W3F: white light colours now additionally available with an average of 70 % more brightness and optimal colour homogeneity 10 V BACKlight BL04 BACKlight BL04 is even brighter and is ideal especially for large surfaces One reel comprises two LED chains, each consisting of 30 boards with four LEDs each Depending on the model, the maximum overall length is 2 x 2.4 m = 4.8 m or 2 x 3.6 m = 7.2 m Colours: green, blue, white Optimally compatible with OPTOTRONIC 10 V for outdoor use with IP6X protection NEW BL04L-W3F: white light colours now additionally available with an average of 70 % more brightness and optimal colour homogeneity 10 V Benefits of both BACKlight modules: Quick and simple installation from the reel The fl exible cables allow for the luminance to be individually adjusted Wide beam angles allow for very fl at lettering design with uniform illumination The boards are treated at the factory with a special protective coating proven to shield them against moisture and salty condensation Split points between the individual boards make it easier to prepare the boards and mount them in lettering Optional accessory: installation aid BL-T adhesive base 7
OSRAM LINEARlight Flex SIDELED AND DRAGONchain Alternatives with a big effect: LINEARlight Flex and DRAGONchain. LINEARlight Flex SIDELED and DRAGONchain extend the range of LED systems from OSRAM that are suitable for illuminated advertising. The side-emitting version of the LINEARlight Flex offers indirect lighting that gives lettering an eye-catching halo effect. DRAGONchain gets its impressive brightness from the OSRAM high-flux LED Golden DRAGON and is the efficient alternative to white fluorescent lamps and for backlighting large lettering. Attractive backlighting: with a wide side beam angle of 120, the LINEARlight Flex SIDELED LED modules create an eye-catching halo effect around complex structures, lettering and logos. Ideal for large and deep lettering: with its high luminance and a beam angle of 120, DRAGONchain produces particularly uniform backlighting. 8
OSRAM LINEARlight Flex SIDELED AND DRAGONchain 10 V LINEARlight Flex SIDELED Flexible, splittable LED tape with 300 LEDs per reel The overall length is 4.2 m Installation from the reel and simple connection to the control gear reduce installation costs considerably The self-adhesive backing makes installation in metallic lettering easier. The module can be split at specially marked points so that individual lengths can be used Light emission parallel to the mounting surface and low mounting height mean this module can be used in very narrow spaces Colours: red, yellow, green, blue, white Optimally compatible with OPTOTRONIC 10 V control gear 24 V DRAGONchain LED chain of 18 metal-core boards, each with two OSRAM Golden DRAGON LEDs The overall length is 3.6 m Ideal for mounting in large, deep lettering Different luminances can be easily achieved because the flexible cables enable the boards to be positioned at varying distances from one another Mounting and simple connection to the control gear reduce installation costs considerably The low height and the wide beam angle allow for uniform illumination of the backlit structures The entire LED chain with 18 boards can be split into parts of 3 boards or multiples thereof, making it easier to prepare the boards and mount them in the lettering The boards are treated with protective coating during manufacture to shield them against moisture and condensation Colour: white Optimally compatible with OPTOTRONIC 24 V control gear with IP6X protection 9
The perfect complement: OSRAM OPTOTRONIC control gear. A perfect match is characterised by the fact that everything is coordinated down to the last detail. It s the same with LED modules and control gear from OSRAM. In order to be able to offer intelligent and economical systems for a wide range of applications, OSRAM develops all the components in-house, thus ensuring optimum functionality and efficiency. OPTOTRONIC with IP6X protection. Control gear for outdoor applications with type of protection IP64 or IP65 (OPTOTRONIC OT 6 CE and OT 12 LE with IP65 and OPTOTRONIC OT 50 E and OT 75 E with IP64) Output voltage 10 V or 24 V DC; electronically stabilised, constant DC voltage Several modules can be connected in parallel within the specifi ed output range Safe operation thanks to electrical isolation between the primary side and the secondary side (SELV equivalent) Operation at ambient temperatures from -25 C to +60 C Intelligent power matching for LED modules (Smart Power Supply) on OPTOTRONIC OT 50 E and OT 75 E Number of LED modules per control gear LED modules OT 6 CE OT 12 LE OT 50 E OT 75 E (10 V) (10 V) (10 V) (24 V) BACKlight BL02 1/8 1/4 1 BACKlight BL04 1/8 1/4 1 LINEARlight Flex SIDELED 1) 2) 1) 2) 1 2 1) DRAGONchain 1 1/3 1) Colour-dependent 2) Only sections of the entire module 10
Razor sharp. Illuminated advertising as exemplified by the Yorkdale logotype. The logotypes for the Yorkdale Shopping Centre in Toronto showcase the impressive performance of LED technology. OSRAM BACKlight modules provide homogeneous illumination, a pleasant lighting effect and a reduction in energy consumption by 74 %. Before: the old Yorkdale cold cathode lamp logotype on the front of the 18 metre high glass atrium. OSRAM offers integrated systems with high levels of effi ciency and luminous effi cacy for creative lighting design. The 120 beam angle of the BACKlight modules allows the modules to be positioned close to the cover. This ensures uniform illumination and a thinner contour for the logotype. Based on calculations performed with the LED designer, a total of around 1,000 BACKlight LED modules and 128 OT 50 E IP64 units (each rated at 50 W) were installed. After: the logotype with the LED lighting solution from OSRAM. Energy consumption was reduced by 74 % and the overall look was made much more attractive. 11
OSRAM LED designer AND System + Guarantee Good service does not have a price. The OSRAM LED designer. With the LED designer, OSRAM has developed a useful online tool that helps to select the right module and can calculate the quantity of products for a particular LED design. The LED designer was used successfully for example for the Yorkdale logotype. The tool can be accessed directly at www.osram.com/led-designer. Simply enter a few parameters such as, for example, type of acrylic glass, luminance, area to be lit, bar thickness etc., and the program will select the right LED modules. The integrated calculator lists the necessary system units and provides the relevant order data. Lighting design couldn t be easier. The System + Guarantee* from OSRAM: systematic quality from a single source. LED modules from OSRAM achieve their optimum functionality when operating as a system in conjunction with electronic control gear from OSRAM because both components are always perfectly matched to one another. We therefore offer an extensive guarantee for ECGs and LED modules from OSRAM. All the details on the relevant products and systems, on the registration as well as the guarantee requirements can be found at: www.osram.com/system-guarantee * After registering the system and under certain conditions of use. 12
TECHNICAL DATA Height: 4 mm All data in mm reference number BACKlight BL02 BL02L-W3F-865 4008321214645 white 240 10 1) 44.0 1) 880 1) 120 1) 6500 1) 2 x 7.2 5 BL02S-W2-865 4008321083937 white 240 10 1) 38.0 1) 510 1) 120 1) 6500 1) 2 x 4.8 5 BL02S-W2-854 4008321084132 white 240 10 1) 38.0 1) 510 1) 120 1) 5400 1) 2 x 4.8 5 BL02S-S1 4008321083951 super red 240 10 1) 38.0 1) 380 1) 120 1) 633 1) 2 x 4.8 5 BL02S-A2 4008321174932 red 240 10 1) 38.0 1) 1180 1) 120 1) 617 1) 2 x 4.8 5 BL02S-A1 4008321083715 red 240 10 1) 38.0 1) 600 1) 120 1) 617 1) 2 x 4.8 5 BL02L-A1 4008321084019 red 240 10 1) 38.0 1) 600 1) 120 1) 617 1) 2 x 7.2 5 BL02S-O1 4008321083975 orange 240 10 1) 38.0 1) 750 1) 120 1) 606 1) 2 x 4.8 5 BL02S-Y2 4008321084033 yellow 240 10 1) 38.0 1) 750 1) 120 1) 587 1) 2 x 4.8 5 BL02S-T2 4008321084057 green 240 10 1) 32.0 1) 430 1) 120 1) 525 1) 2 x 4.8 5 BL02S-B1 4008321084071 blue 240 10 1) 32.0 1) 100 1) 120 1) 470 1) 2 x 4.8 5 For current photometric data and important safety, installation and application information see www.osram.com/led-systems-downloads Height: 4 mm All data in mm reference number BACKlight BL04 BL04L-W3F-865 4008321214706 white 240 10 1) 44.0 1) 880 1) 120 1) 6500 1) 2 x 3.6 5 BL04S-W2-865 4008321907370 white 240 10 1) 38.0 1) 510 1) 120 1) 6500 1) 2 x 2.4 5 BL04S-W2-854 4008321907356 white 240 10 1) 38.0 1) 510 1) 120 1) 5400 1) 2 x 2.4 5 BL04S-T2 4008321907318 green 240 10 1) 32.0 1) 430 1) 120 1) 525 1) 2 x 2.4 5 BL04S-B1 4008321907332 blue 240 10 1) 32.0 1) 100 1) 120 1) 470 1) 2 x 2.4 5 For current photometric data and important safety, installation and application information see www.osram.com/led-systems-downloads Accessory number BL-T installation aid for BACKlight BL02 and BL04 BL-T 4008321161284 9.5 x 9.5 x 6.25 300 1) All technical parameters apply to the entire module. In view of the complex manufacturing process for light-emitting diodes, the specifi ed typical values for the technical LED parameters are merely statistical values that do not necessarily correspond to the actual technical parameters of an individual product, which may vary from the typical values. 2) Without adherence to EN 55015.
reference number LINEARlight Flex SIDELED LM11A-W1-865 4050300873879 white 300 10 1) 30.0 1) 405 1) 120 1) 6500 1) 8 LM11A-W1-854 4050300817217 white 300 10 1) 30.0 1) 405 1) 120 1) 5400 1) 8 LM11A-W1-847 4050300817194 white 300 10 1) 30.0 1) 405 1) 120 1) 4700 1) 8 LM11A-A 4050300938554 red 300 10 1) 15.0 1) 117 1) 120 1) 615 1) 8 LM11A-Y1 4050300946016 yellow 300 10 1) 22.5 1) 405 1) 120 1) 587 1) 8 LM11A-T 4050300938578 green 300 10 1) 30.0 1) 147 1) 120 1) 528 1) 8 LM11A-B 4050300938561 blue 300 10 1) 30.0 1) 37 1) 120 1) 470 1) 8 For current photometric data and important safety, installation and application information see www.osram.com/led-systems-downloads reference number Height: 4.2 mm All data in mm Height: 6.6 mm All data in mm Printed on paper treated with chlorine-free bleach 138W002GB OSRAM CSM CC 08/07 Lg Subject to modification without notice. Errors and omissions excepted z DRAGONchain DC02A-W3-865 4008321174680 white 36 24 1) 52.0 1) 1320 1) 120 1) 6500 1) 3.60 1 For current photometric data and important safety, installation and application information see www.osram.com/led-systems-downloads Type of reference number protection OPTOTRONIC OT 6/200-240/10 CE 4008321113306 10 V LED module 200 240 50/60 6-20 +50 51 x 52 x 22 IP65 OT 12/220-240/10 LE 4008321174253 10 V LED module 220 240 50/60 12-20 +50 190 x 20 x 20 IP65 OT 50/120-277/10 E 4050300861500 10 V LED module 120 277 0 2) /50/60 50-25 +60 241 x 43 x 30 IP64 OT 75/120-277/24 E 4050300861487 24 V LED module 120 277 0 2) /50/60 75-25 +60 241 x 43 x 30 IP64 For current data and important safety, installation and application information see www.osram.com/ecg-downloads