Contents LTX Optical Distribution Panels... 1... 1 Section One: LTX Overview... 3 1RU and 2RU Panels... 3 4RU Panels... 3 Patch Panels... 3 Combination Panels Patch and Splice... 4 Section Two: Unloaded Panels... 5 Numbers... 5 1RU and 2RU LTX Standard Bulkhead Panels... 5 4RU Panels LTX Standard Bulkhead Panels... 5 LC Patch Plates... 6 SC Patch Plates... 7 Blank Plates... 8 MPO Patch Plates and Modules... 8 Splitter Modules... 8 Accessories... 9 Section Three: Fiber Optic Splitter and WDM Modules...10 Fiber Optic Splitter and WDM Material/Component Requirements...10 Fiber Optic Cables/Connectors...10 Storage of Materials/Components...10 Fiber Optic Splitter and WDM Performance Requirements...11 Fiber Optic Splitter and WDM Packaging...11 Section Four: Patch Only Panels...12 1RU and 2RU Patch Panels...12 4RU Panels...12 Section Five: Patch and Splice Panels...13 1RU and 2RU Patch and Mass Fusion Splice Panels...13 LTX Patch and Splice Solutions Configurator...14 LTX 1RU and 2RU Patch and Stranded Splice Panels...15 1RU and 2RU Patch and Stranded Splice Panels...15 Section Six: Pre-terminated Solutions...16 LTX Pre-terminated Solutions Configurator...17 2
Section One: LTX Overview The Telect LTX 1RU, 2RU and 4RU bulkhead-style fiber-optic panels offer a cost-effective optical distribution point for patch-only, patch-and-splice, MPO/MTP conversions and splitter applications, all while fitting into an industry-standard footprint. Pre-loaded and unloaded panels are available to support most requirements. 1RU and 2RU Panels Applications: Low fiber counts, remote sites, huts, small cell, DAS Many applications require the termination of just a handful of fibers. Telect LTX panels are ideal for lower-density environments with the potential for scale. Occupying a minimal amount of equipment rack space, they fit into networks where footprint is a concern. Telect 1RU LTX panels just 1.75 inches in height terminate up to 18 fibers with standard SC, six-port LGX-style patch plates. Install eight-port plates for a 24-port panel. With small form-factor LC connectors, 12-port patch plates provide 36 terminations, or use 24-port patch plates to achieve 72 terminations in a 1RU. The 2RU panel provides double the termination capacity. A standard SC patch plates provide a 36- port panel in a 2RU. 4RU Panels Applications: Central office, C-RAN, data enterprise, high density, etc. The 4RU 144-port SC patch panel is one of the most commonly deployed bulkhead panel configurations in today s networks. This configuration uses SC adapters, with a standard bulkhead to accommodate 144 SC adapters. The result is a high-density solution with simple access to adapters for connections. With different patch plates, greater circuit density can be achieved. Eight-port LGX-style patch plates are available with SC adapters, allowing for a 96-port 4RU panel. For even greater density, 24-port LC patch plates create a 288-port panel. Patch Panels In high circuit-count applications, manageable circuit density is often a high priority. If a bulkhead panel is still the preferred platform for optical distribution, a Telect 144-port LTX patch panel is the highest-density SC option in a 4RU space. This 4RU panel uses a bulkhead plate that is pre-loaded, or populated, with 144 SC connectors. Rather than employing six-port or eight-port patch plates, the adapters are part of a single unit that is pre-fastened in the panel. 3
The same high density can be attained using 12-port LC patch plates. The 4RU panel holds a total of 12 patch plates, for 144 total terminations. Install 24-port LC patch plates, using a total of 12, for 288 LC terminations. Combination Panels Patch and Splice All Telect LTX panels can be configured for patch and splice in a single chassis. A compact 1RU can house up to 36 fibers, while the 2RU can host 72 fibers and the 4RU, 144 or 288 slices with with a stranded or mass fusion splice cassette option. A combination patch and splice system increases versatility and provides a multifunctional platform for optical distribution. Multifunctionality is accomplished in a single platform. Telect LTX combination panels range from 1RU to 4RU, with capacities from 12 to 288 fibers. Additional Functionality Splitter Modules and MPO Fiber optic splitting is a key application in many of today s optical networks, as network designers strive to maximize every available fiber. In a bulkhead-style panel, splitter modules can provide a platform to tap off a small portion of the signal (10%, for example) for non-intrusive test access without affecting the quality of the network signal. Telect offers a comprehensive range of splitter modules for bulkhead-style panels with a broad range of split ratios, connector types and configuration options. Wave division multiplexing (WDM) modules are also available as well as MPO configurations. 4
Section Two: Unloaded Panels Unloaded LTX panels offer customers the ability to design their own distribution panel in three steps. Select your: 1. Panel size and density 2. Configuration: patch and splice, patch only, MPO/MTP 3. Patch plates, modules, splitters, splice trays/cassettes and accessories Numbers 1RU and 2RU LTX Standard Bulkhead Panels Number Max. Patch Plates/Splitter/MPO Module Capacity 1RU/12-72 port LTX-M1RU 3 LTX-M1RU Number Max. Patch Plates/Splitter/MPO Module Capacity 2RU/36-144 port LTX-M2RU 6 LTX-M2RU 4RU Panels LTX Standard Bulkhead Panels Number Max. Patch Plates/Splitter/MPO Module Capacity 4RU/72-288 port LTX-M4RU 12 LTX-M4RU 5
LC Patch Plates 055-0000-5010 PATCH PLATE, 12-PORT, LC/UPC 055-0000-5010-BLK PATCH PLATE, 12-PORT, LC/UPC, BLACK 055-0000-5012 PATCH PLATE, 12-PORT, LC MULTIMODE 055-0000-5012-BLK PATCH PLATE, 12-PORT, LC MULTIMODE, BLACK 055-0000-5090 PATCH PLATE, 12-PORT, LC/APC 055-0000-5090-BLK PATCH PLATE, 12-PORT, LC/APC, BLACK 055-0000-5210 PATCH PLATE, 24-PORT, LC/UPC DUPLEX 055-0000-5210-BLK PATCH PLATE, 24-PORT, LC/UPC DUPLEX, BLACK 055-0000-5211 PATCH PLATE, 24-PORT, LC/UPC QUAD, LTX, MIRROR, GRAY 055-0000-5211-BLK PATCH PLATE, 24-PORT, LC/UPC QUAD, LTX, MIRROR, BLACK 055-0000-5224 PATCH PLATE, 24-PORT, LC MM QUAD, AQUA 055-0000-5224-BLK PATCH PLATE, 24-PORT, LC MM QUAD, AQUA 055-0000-5290 PATCH PLATE, 24-PORT, LC/APC DUPLEX 055-0000-5290-BLK PATCH PLATE, 24-PORT, LC/APC DUPLEX, BLACK 055-0000-5291 PATCH PLATE, 24-PORT, LC/APC QUAD, LTX, MIRROR, GRAY 055-0000-5291-BLK PATCH PLATE, 24-PORT, LC/APC QUAD, LTX, MIRROR, BLACK 055-0000-5A10 ANGLED PATCH PLATE, 12-PORT, LC/UPC 055-0000-5A10-BLK ANGLED PATCH PLATE, 12-PORT, LC/UPC, BLACK 055-0000-5A10-BLKV VERTICAL ANGLED PATCH PLATE, 12-PORT, LC/UPC, BLACK 055-0000-5A10-V VERTICAL ANGLED PATCH PLATE, 12-PORT, LC/UPC 055-0000-5A210 ANGLED PATCH PLATE, 24-PORT, LC/UPC 055-0000-5A210-BLK ANGLED PATCH PLATE, 24-PORT, LC/UPC, BLACK 055-0000-5A210-BLKV VERTICAL ANGLED PATCH PLATE, 24-PORT, LC/UPC, BLACK 055-0000-5A210-V VERTICAL ANGLED PATCH PLATE, 24-PORT, LC/UPC 055-0000-5A290 ANGLED PATCH PLATE, 24-PORT, LC/APC 055-0000-5A290-BLK ANGLED PATCH PLATE, 24-PORT, LC/APC, BLACK 055-0000-5A290-BLKV VERTICAL ANGLED PATCH PLATE, 24-PORT, LC/APC, BLACK 055-0000-5A290-V VERTICAL ANGLED PATCH PLATE, 24-PORT, LC/APC 055-0000-5A90 ANGLED PATCH PLATE, 12-PORT, LC/APC 055-0000-5A90-BLK ANGLED PATCH PLATE, 12-PORT, LC/APC, BLACK 055-0000-5A90-BLKV VERTICAL ANGLED PATCH PLATE, 12-PORT, LC/APC, BLACK 055-0000-5A90-V VERTICAL ANGLED PATCH PLATE, 12-PORT, LC/APC 24-port LC/UPC patch plate 12-port LC/APC patch plate 6
SC Patch Plates 055-0000-6010 PATCH PLATE, 6-PORT, SC/UPC 055-0000-6010-BLK PATCH PLATE, 6-PORT, SC/UPC, BLACK 055-0000-6020 PATCH PLATE, 6-PORT, SC MULTIMODE 055-0000-6020-BLK PATCH PLATE, 6-PORT, SC MULTIMODE, BLACK 055-0000-6070 PATCH PLATE, 6-PORT, SC/APC 055-0000-6070-BLK PATCH PLATE, 6-PORT, SC/APC, BLACK 055-0000-6080 PATCH PLATE, 8-PORT, SC/UPC 055-0000-6080-BLK PATCH PLATE, 8-PORT, SC/UPC, BLACK 055-0000-6082 PATCH PLATE, 8-PORT, SC MULTIMODE 055-0000-6082-BLK PATCH PLATE, 8-PORT, SC MULTIMODE, BLACK 055-0000-6090 PATCH PLATE, 8-PORT, SC/APC 055-0000-6090-BLK PATCH PLATE, 8-PORT, SC/APC, BLACK 055-0000-6210 PATCH PLATE, 12-PORT, SC/UPC DUPLEX 055-0000-6210-BLK PATCH PLATE, 12-PORT, SC/UPC DUPLEX, BLACK 055-0000-6270 PATCH PLATE, 12-PORT, SC/APC DUPLEX 055-0000-6270-BLK PATCH PLATE, 12-PORT, SC/APC DUPLEX, BLACK 055-0000-6A10 ANGLED PATCH PLATE, 6-PORT, SC/UPC 055-0000-6A10-BLK ANGLED PATCH PLATE, 6-PORT, SC/UPC, BLACK 055-0000-6A10-BLKV VERTICAL ANGLED PATCH PLATE, 6-PORT, SC/UPC, BLACK 055-0000-6A10-V VERTICAL ANGLED PATCH PLATE, 6-PORT, SC/UPC 055-0000-6A270 ANGLED PATCH PLATE, 12-PORT, SC/APC 055-0000-6A270-BLK ANGLED PATCH PLATE, 12-PORT, SC/APC, BLACK 055-0000-6A270-BLKV VERTICAL ANGLED PATCH PLATE, 12-PORT, SC/APC, BLACK 055-0000-6A270-V VERTICAL ANGLED PATCH PLATE, 12-PORT, SC/APC 055-0000-6A70 ANGLED PATCH PLATE, 6-PORT, SC/APC 055-0000-6A70-BLK ANGLED PATCH PLATE, 6-PORT, SC/APC, BLACK 055-0000-6A70-BLKV VERTICAL ANGLED PATCH PLATE, 6-PORT, SC/APC, BLACK 055-0000-6A70-V VERTICAL ANGLED PATCH PLATE, 6-PORT, SC/APC 055-0000-6A80 ANGLED PATCH PLATE, 8-PORT, SC/UPC 055-0000-6A80-BLK ANGLED PATCH PLATE, 8-PORT, SC/UPC, BLACK 055-0000-6A80-BLKV VERTICAL ANGLED PATCH PLATE, 8-PORT, SC/UPC, BLACK 055-0000-6A80-V VERTICAL ANGLED PATCH PLATE, 8-PORT, SC/UPC 055-0000-6A82-V VERTICAL ANGLED PATCH PLATE, 8-PORT, SC MULTIMODE 055-0000-6A90 ANGLED PATCH PLATE, 8-PORT, SC/APC 055-0000-6A90-BLK ANGLED PATCH PLATE, 8-PORT, SC/APC, BLACK 055-0000-6A90-BLKV VERTICAL ANGLED PATCH PLATE, 8-PORT, SC/APC, BLACK 055-0000-6A90-V VERTICAL ANGLED PATCH PLATE, 8-PORT, SC/APC 12-port SC/UPC patch plate 6-port SC/UPC angled patch plate 7
Blank Plates 055-0000-9000 PATCH PLATE, BLANK 055-0000-9000-BLK PATCH PLATE, BLANK, BLACK 055-0000-9000-GRY PATCH PLATE, BLANK, GRAY MPO Patch Plates and Modules 055-0000-MT06 PATCH PLATE, 6-PORT MTP/MPO, POLARITY TYPE A 055-0000-MT08 PATCH PLATE, 8-PORT MTP/MPO, POLARITY TYPE A 057-MPO-5I124 MPO MOD: MM (OM4) SINGLE MPO TO LC/UPC, 24-PORT 057-MPO-5I212 MPO MOD: MM (OM4) DUAL MPO TO LC/UPC, 24-PORT 057-MPO-5Q124 MPO MOD: MM (OM3) SINGLE MPO TO LC/UPC, 24-PORT 057-MPO-LV124 MPO MOD: SM SINGLE MPO TO LC/UPC, 24-PORT 057-MPO-LV212 MPO MOD: SM DUAL MPO TO LC/UPC, 24-PORT 057-MPO-NV112 MPO MOD: SM SINGLE MPO TO SC/APC, 12-PORT Blank Plate Splitter Modules 057-1219-6161 SPLTR MOD: FRONT I/O/M, 1X2, SM, 90/10 SPLIT, SC/UPC, SC/UPC 057-1455-6767 SPLTR MOD: FRONT I/O/M, DUAL 1X2, SM, 50/50 SPLIT, SC/APC, SC/APC 057-1625-6767 SPLTR MOD: FRONT I/O/M, 1X4, SM, 25/25/25/25 SPLIT, SC/APC, SC/APC 057-1A01-6767 WDM MOD: FRONT I/O/M, SINGLE, SM, GPON 1310/1490, VIDEO 1550, SC/APC 057-1B00-5151 WDM MOD: FRONT I/O/M, DUAL WDM, SM, 1310/1550, LC/UPC, LC/UPC 057-1B00-6161 WDM MOD: FRONT I/O/M, DUAL WDM, SM, 1310/1550, SC/UPC, SC/UPC 057-4819-6161 SPLTR MOD: FRONT I/O, REAR MON, QUAD 1X2, SM, 90/10 SPLIT, SC/UPC, SC/UPC 057-4827-6161 SPLTR MOD: FRONT I/O, REAR MON, QUAD, 1X2, SM, 75/25 SPLIT, SC/UPC, SC/UPC 057-4828-6161 SPLRT MOD: FRONT I/O, REAR MON, QUAD, 1X2, SM, 80/20 SPLIT, SC/UPC, SC/UPC 057-7419-5151-DR SPLTR MOD: IN 1-FR, OUT 1-RE, MON 1-FR, IN 2-RE, OUT 2-FR, MON 2-FR, DUAL 1X2, SM, 1310/1550, 90/10 SPLIT, LC/UPC, LC/UPC, OFFSET, REAR Splitter module PN 057-1219-6161 MPO patch plate PN 055-0000-MT08 8
Accessories KIT-CLMP-LTX-1RU KIT-CLMP-LTX-1RU-BLK KIT-CLMP-LTX-2RU KIT-CLMP-LTX-2RU-BLK KIT-CLMP-LTX-4RU KIT-CLMP-LTX-4RU-BLK KIT-SLEEVES LTX-SPT LTX-SPT-288 CLAMP: KIT, LTX, CABLE O.D. 0.85", 1RU, GRY CLAMP: KIT, LTX, CABLE O.D. 0.85", 1RU, BLK CLAMP: KIT, LTX, CABLE O.D..2"-1.2", 2RU, TRAY, ROHS CLAMP: KIT, LTX, CABLE O.D..2"-1.2", 2RU, TRAY, BLK CLAMP: KIT, LTX, CABLE O.D..2"-1.2", 4RU, GRY CLAMP: KIT, LTX, CABLE O.D..2"-1.2", 4RU, BLK 12-PACK SPLICE SLEEVES, 60MM LENGTH KIT: FO, LTX, SPLICE TRAY KIT: FO, LTX, SPLICE TRAY, 288 STRANDED, 4RU LTX splice tray 12-pack splice sleeves 9
Section Three: Fiber Optic Splitter and WDM Modules The Telect splitter and wavelength division multiplexer (WDM) modules provide a protective, managed fiber cable environment for splitting/multiplexing/demultiplexing in application involving network testing and real-time monitoring. This standard defines the minimum quality requirements for Telect fiber optic splitters and WDM modules. The standard includes material and component specifications, performance, geometric and visual requirements for Telect fiber optic splitters and WDM modules. The standard for labeling and packaging of splitters and WDM modules is also within the scope of this section. Fiber Optic Splitter and WDM Material/Component Requirements All materials and components used to manufacture Telect fiber optic splitters and WDM modules need to meet Telecordia Core GR326, 1221, 1209 and RoHS requirements. This includes, but is not limited to, fiber optic cable, connectors, zirconium ceramic ferrules, boots and the epoxy used for securing fiber. Telect Purchasing, Engineering and Product Management require pre-approval for the use of any fiber optic material not meeting GR326, 1221, 1209 and RoHS requirements unless otherwise noted on Telect specifications or drawings. Any parameter not defined in this specification or on a Telect drawing that is considered critical to the performance of fiber optic splitter and WDM quality needs to be addressed with Telect by the supplier prior to production. NOTE: Fiber optic splitters and WDM modules will be identified per product code, serial number, mfg. date and location, and traceable to test results and cable lot. Fiber Optic Cables/Connectors Reference TWS-906 Storage of Materials/Components Materials and components used for manufacturing Telect fiber optic and WDM modules will be stored in a manner that prevents contamination or damage to product. ALL MATERIALS FOR TELECT SPLITTER AND WDM PRODUCTS MUST BE RoHS COMPLIANT 10
Fiber Optic Splitter and WDM Performance Requirements Bandpass 1310/1550 ± 20 nm 850 ± 40 nm Directivity 50 db 40 db Insertion Loss (Max, Including connectors) Single Mode Multi-Mode (50/125) 50/50: 3.9/3.9 db 60/40: 3.0/5.0 db 70/30: 2.2/6.3 db 80/20: 1.5/8.2 db 90/10: 0.95/11.6 db 33/33/33: 6.0/6.0/6.0 db 25/25/25/25: (PLC) 7.5/7.5/7.5/7.5 db Return loss 55 db 40 db 50/50: 4.3/4.3 db 60/40: 3.3/5.3 db 70/30: 2.6/6.5 db 80/20: 2.1/8.3 db 90/10: 1.6/11.7 db 33/33/33: 6.5/6.5/6.5 db 25/25/25/25: (PLC) 8.0/8.0/8.0/8.0 db Fiber Optic Splitter and WDM Packaging Supplier shall pack each unit in a corrugated kraft box. number and Revision Level of this box is structured in the Bill of Material of the End Item ordered. Please obtain the latest information from Telect whenever a new order is placed. Each unit shall be additionally wrapped with bubble wrap or other suitable protective means within the box. 11
Section Four: Patch Only Panels 1RU and 2RU Patch Panels LTX-P121L 12-PORT 1RU, LC/UPC, PATCH PANEL LTX-P121S 12-PORT 1RU, SC/UPC, PATCH PANEL LTX-P241L 24-PORT 1RU, LC/UPC, PATCH PANEL LTX-P241N 24-PORT 1RU, SC/APC, PATCH PANEL LTX-P241S 24-PORT 1RU, SC/UPC PATCH PANEL LTX-P481L 48-PORT 2RU, LC/UPC PATCH PANEL LTX-P481N 48-PORT 2RU, SC/APC PATCH PANEL LTX-P481S 48-PORT 2RU, SC/UPC PATCH PANEL LTX-P721L 72-PORT 2RU, LC/UPC PATCH PANEL LTX-P721L-1RU 72-PORT 1RU, LC/UPC PATCH PANEL LTX-P721N 72-PORT 2RU, SC/APC PATCH PANEL LTX-P721S 72-PORT 2RU, SC/UPC PATCH PANEL LTX-P961L 96-PORT 2RU, LC/UPC PATCH PANEL LTX-P961LH 96-PORT 2RU, LC/UPC, HORIZONTAL ANGLED PATCH, ROHS LTX-P141L-2RU 144-PORT 2RU, LC/UPC PATCH PANEL LTX-P721L-1RU 4RU Panels LTX-P141G LTX-P141L LTX-P141N LTX-P141S LTX-P281L LTX-P961N LTX-P961S 144-PORT 4RU, LC/APC PATCH PANEL 144-PORT 4RU, LC/UPC PATCH PANEL 144-PORT 4RU, SC/APC PATCH PANEL 144-PORT 4RU, SC/UPC PATCH PANEL 288-PORT 4RU, LC/UPC, PATCH ONLY 96-PORT 4RU, SC/APC PATCH PANEL 96-PORT 4RU, SC/UPC PATCH PANEL LTX-P141L 12
Section Five: Patch and Splice Panels 1RU and 2RU Patch and Mass Fusion Splice Panels LTX-C241L-M LTX-C241N-M LTX-C241S-M LTX-C481L-M LTX-C481N-M LTX-C481S-M LTX-C721L-M LTX-C721L-M-1RU LTX-C721N-M LTX-C721S-M LTX-C141L-M2RU 24-PORT 1RU, LC/UPC, P/S, UDISTR, MASS FUSE TRAY, INTEGRATED MICRO PIGTAIL 24-PORT 1RU, SC/APC, P/S, UDISTR, MASS FUSE TRAY, INTEGRATED MICRO PIGTAIL 24-PORT 1RU, SC/UPC, P/S, UDISTR, MASS FUSE TRAY, INTEGRATED MICRO PIGTAIL 48-PORT 2RU, LC/UPC, P/S, UDISTR, MASS FUSE TRAY, INTEGRATED MICRO PIGTAIL 48-PORT 2RU, SC/APC, P/S, UDISTR, MASS FUSE TRAY, INTEGRATED MICRO PIGTAIL 48-PORT 2RU, SC/UPC, P/S, UDISTR, MASS FUSE TRAY, INTEGRATED MICRO PIGTAIL 72-PORT 2RU, LC/UPC, P/S, UDISTR, MASS FUSE TRAY, INTEGRATED MICRO PIGTAIL 72-PORT 1RU, LC/UPC, P/S, UDISTR, MASS FUSE TRAY, INTEGRATED MICRO PIGTAIL 72-PORT 2RU, SC/APC, P/S, UDISTR, MASS FUSE TRAY, INTEGRATED MICRO PIGTAIL 72-PORT 2RU, SC/UPC, P/S, UDISTR, MASS FUSE TRAY, INTEGRATED MICRO PIGTAIL 144-PORT 2RU, LC/UPC, PATCH/SPLICE, INTEGRATED 3M 900UM PIGTAIL, STRD LTX-C721L-M 4RU Patch and Mass Fusion Splice Panels LTX-C141L-M 144-PORT 4RU, LC/UPC, P/S, UDISTR, MASS FUSE TRAY, INTEGRATED MICRO PIGTAIL LTX-C141N-M 144-PORT 4RU, SC/APC, P/S, UDISTR, MASS FUSE TRAY, INTEGRATED MICRO PIGTAIL LTX-C141S-M 144-PORT 4RU, SC/UPC, P/S, UDISTR, MASS FUSE TRAY, INTEGRATED MICRO PIGTAIL LTX-C281L-M 288-PORT 4RU, LC/UPC, PATCH/SPLICE, INTEGRATED PIGTAIL, MASS FUSE LTX-C961L-M 96-PORT 4RU, LC/UPC, P/S, UDISTR, MASS FUSE TRAY, INTEGRATED MICRO PIGTAIL LTX-C961S-M 96-PORT 4RU, SC/UPC, P/S, UDISTR, MASS FUSE TRAY, INTEGRATED MICRO PIGTAIL LTX-C961N-M 96-PORT 4RU, LC/APC, P/S, UDISTR, MASS FUSE TRAY, INTEGRATED MICRO PIGTAIL LTX-C141N-M 13
LTX Patch and Splice Solutions Configurator LTX - 1 - P C Configuration Patch only Patch & splice Patch Panel Capacity 12 12 terms, 1.75" H (1RU) 24 24 term, 1.75" H (1RU) 48 48 term, 1.75" H (1RU/2RU) 72 72 term, 1.75" H (2RU) 96 96 term, 3.5" H (2RU) 14 144 term, 7" H (4RU) 28 288 term, 7" H (4RU) Adapter Type S SC/UPC N SC/APC L LC/UPC G LC/APC Splice Requirement S Single Fusion M Mass Fusion Rack Mount 1 19"/23" Universal Mount 14
LTX 1RU and 2RU Patch and Stranded Splice Panels LTX-C121L-S LTX-C121S-S LTX-C241L-S LTX-C241N-S LTX-C241S-S LTX-C481L-S LTX-C481N-S LTX-C481S-S LTX-C721L-S LTX-C721N-S LTX-C721S-S LTX-C961LH-S LTX-C141L-S2RU 12-PORT 1RU, LC/UPC, PATCH/SPLICE, INTEGRATED PT, STRANDED CASSETTE 12-PORT 1RU, SC/UPC, PATCH/SPLICE, INTEGRATED 3M 900UM PIGTAIL 24-PORT 1RU, LC/UPC, PATCH/SPLICE, INTEGRATED 3M 900UM PIGTAIL 24-PORT 1RU, SC/APC, PATCH/SPLICE, INTEGRATED 3M 900UM PIGTAIL 24-PORT 1RU, SC/UPC, PATCH/SPLICE, INTEGRATED 3M 900UM PIGTAIL 48-PORT 2RU, LC/UPC, PATCH/SPLICE, INTEGRATED 3M 900UM PIGTAIL 48-PORT 2RU, SC/APC, PATCH/SPLICE, INTEGRATED 3M 900UM PIGTAIL 48-PORT 2RU, SC/UPC, PATCH/SPLICE, INTEGRATED 3M 900UM PIGTAIL 72-PORT 2RU, LC/UPC, PATCH/SPLICE, INTEGRATED 3M 900UM PIGTAIL 72-PORT 2RU, SC/UPC, PATCH/SPLICE, INTEGRATED 3M 900UM PIGTAIL 72-PORT 2RU, SC/UPC, PATCH/SPLICE, INTEGRATED 3M 900UM PIGTAIL 96-PORT 2RU, LC/UPC, HORIZONTAL ANGLED P/S, INTEGRATED 3M 900UM STRD 144-PORT 2RU, LC/UPC, PATCH/SPLICE, INTEGRATED 3M 900UM PIGTAIL LTX-721S-S 1RU and 2RU Patch and Stranded Splice Panels LTX-C141G-S 144-PORT 4RU, LC/APC, PATCH/SPLICE, INTEGRATED 3M 900UM PIGTAIL LTX-C141L-S 144-PORT 4RU, LC/UPC, PATCH/SPLICE, INTEGRATED 3M 900UM PIGTAIL LTX-C141N-S 144-PORT 4RU, SC/APC, INTEGRATE PATCH/SPLICE, STRANDED SPLICE LTX-C141S-S 144-PORT 4RU, SC/UPC, PATCH/SPLICE, INTEGRATED 3M 900UM PIGTAIL LTX-C281L-S 288-PORT 4RU, LC/UPC, PATCH/SPLICE, INTEGRATED 3M 900UM PIGTAIL LTX-C961L-S 96-PORT 4RU, LC/UPC, PATCH/SPLICE, INTEGRATED 3M 900UM PIGTAIL LTX-C961N-S 96-PORT 4RU, SC/APC, INTEGRATED PATCH/SPLICE, STRANDED SPLICE CASSETTE LTX-C961S-S 96-PORT 4RU, SC/UPC, PATCH/SPLICE, INTEGRATED 3M 900UM PIGTAIL LTX-C281L-S 15
Section Six: Pre-terminated Solutions All mapped out, Telect pre-terminated solutions are ready for quick deployment. Fastest lead-times on the market, from two weeks Protected bend radius Simple installation Competitive pricing Simple ordering process, with just one part number Labeled terminations 16
LTX Pre-terminated Solutions Configurator LTX - 1 - Configuration F Pre-term Patch Panel Capacity 12 12 term, 1.75" H (1RU) 24 24 term, 1.75" H (1RU) 48 48 term, 1.75" H (1RU/2RU) 72 72 term, 1.75" H (2RU) 96 96 term, 3.5" H (2RU) 14 144 term, 7" H (4RU) 28 288 term, 7" H (4RU) Adapter Type S SC/UPC N SC/APC L LC/UPC G LC/APC Length Unit M Meter F Feet Patch Plates G Standard Patch Plate H Horizontal Angle Patch Plate V Vertical Angle Patch Plate Cable Length 001 1.0 025 25.0 Rack Mount 1 19"/23" Universal Mount Multi-Fiber Cable Type V Stranded SM, Riser Rated, Pigtail W Stranded SM, Plenum Rated, Pigtail X Ribbon Fiber SM, Riser Rated, Pigtail Q Stranded MM, Riser Rated, Pigtail, OM3 R Stranded MM, Riser Rated, Pigtail, OM4 U Stranded MM, Plenum Rated, Pigtail, OM3 G Stranded MM, Plenum Rated, Pigtail, OM4 D Stranded SM (8/125), Dri-Flex OSP Non-Armored A Stranded SM (8/125), Riser Rated, Connectorized K BIF SM G.657A1 (8/125) Yellow T BIF MM (50/125) G.657A1 p Multi-Fiber Cable Mounting & Feed Direction (When facing front of chassis) A Right Mount/Top Fed B Left Mount/Top Fed C Right Mount/Bottom Fed D Left Mount/Bottom Fed 17