G3D100 H3D100 3Gb/s, HD, SD stereoscopic production (extreme low latency) and transmission tool for 3D applications A Synapse product COPYRIGHT 2010 AXON DIGITAL DESIGN BV ALL RIGHTS RESERVED NO PART OF THIS DOCUMENT MAY BE REPRODUCED IN ANY FORM WITHOUT THE PERMISSION OF AXON DIGITAL DESIGN BV.
Block schematic & I/O panel G3D100 H3D100 3Gb/s,HD,SD L IN 1 EQ PASS OR FLIP MIRROR FRAME SYNC H-V SHIFT COLOR CORRECTION 3Gb/s,HD,SD L - OUT 3Gb/s,HD,SD R IN 1 EQ SIDE BY SIDE TO STEREO SCOPIC FLIP MIRROR 2D TO 3D FRAME SYNC H-V SHIFT COLOR CORRECTION 3Gb/s,HD,SD R - OUT TEST PATTERN 1 TEST PATTERN 2 MUX SIDE BY SIDE LINE BY LINE CHECKER BOARD MUX 3Gb/s,HD,SD 3D OUT 1 3Gb/s,HD,SD L IN 2 EQ 3Gb/s,HD,SD R IN 2 EQ ANAGLYPH - MIX - SUBTRACT 3Gb/s,HD,SD 3D OUT 2 RS485/GPI [BPH/X17] PLL µp [LINUX] REFERENCE INPUTS 1 2 INTERNAL SYNAPSE BUS RACK CONTROLLER BPH17 BHX17b 3Gb/s, HD, SD LEFT EYE INPUT 1 (OPTIONAL FIBER INPUT) 3Gb/s, HD, SD RIGHT EYE INPUT 1 (OPTIONAL FIBER INPUT) 3Gb/s, HD, SD PROCESSED OUT L1 3Gb/s, HD, SD PROCESSED OUT R1 (OPTIONAL FIBER OUT) GPI I/O relay bypass 3Gb/s, HD, SD PROCESSED OUT L2 3Gb/s, HD, SD PROCESSED OUT R2 (OPTIONAL FIBER OUT) 3Gb/s, HD, SD LEFT EYE INPUT 2 3Gb/s, HD, SD RIGHT EYE INPUT 2
Features The G3D100 and H3D100 are 3Gb/s, HD and SD stereoscopic production and/or transmissions tools. The units can be sourced with a stereoscopic image (and a backup source) or one single input. This enables you to do basic 2D to 3D, stereoscopic, side by side and anaglyph conversions on one card. These sources are processed internally to provide multiple outputs. The G3D100 is compatible with 270Mb/s, 1.5Gb/s and 3Gb/s for full 1080p/50 or 1080p/59.94 use. The H3D100 is compatible with SD SDI (270Mb/s) and HD-SDI (1.5Gb/s) and can be future upgraded to 3Gb/s compatibility 4 single inputs which can be used for basic 2D to 3D conversion Separate H-shift for left and right output Separate H-zoom and V-zoom (not in 1080p of the G3D100) 2 stereoscopic (dual) 3Gb/s SDI inputs. Input 2 can be used to convert SIDE by SIDE into stereoscopic 1 stereoscopic (dual) low latency output Synchronized and timed Flipped and/or mirrored H and V corrected in lines and pixels Color corrected (compensate for mirror color shifts) 2 low latency individual processed outputs Processor one: Side by Side Line by Line Checker board Processor two: Mix (50% gain) Anaglyph (variable) with presets for: Color Anaglyph Half Color Anaglyph Optimized Anaglyph Manual Anaglyph Subtract - difference signal between two images Processed outputs can overlay a raster for alignment checks Compatible with the following formats (auto selecting) (1080p only for G3D100): 1080p/59.94 1080p/50 1080i/59.94 1080i/50 1080p/29.97 1080p25 1080p23.98(psf) 720p/59.94 720p50 SD525 SD625 Transparent for 16 channels of embedded audio (processor outputs contain full set of one input) Individual color corrector for video path left and right Video proc-amp (Y and C control) Locks to Tri-level, Bi-level or SDI input The BPH17 can optionally be fitted with up to two fiber I/O modules (inputs or outputs) Full control and status monitoring through the front panel of the SFR04/SFR08/SFR18 frame and the Ethernet port (ACP)
Output configurations explained The G3D100 can real time convert 2D images into 3D images. This basic conversion ensures the user of a crisp 3D image without artifacts in the processed image. This application shows a single 2D input being applied to the G3D100 card. This input is duplicated by the 3D card. After duplication the two images can be shifted horizontally separately. This is adjustable by the user. The G3D100 will have 3 types of outputs simultaneously; a stereoscopic image, a side-by-side and an anaglyph image.
Stereoscopic sources converted to timed, flipped/mirrored output with simultaneous side-by side and anaglyph outputs. This application shows a mirrored camera rig where the right input is flipped and mirrored. The outputs are retimed to reference or to the first SDI input. The corrected outputs can feed a production mixer for a full blown stereoscopic production. At the same time processed output 1 gives a side by side image compatible with all 3D screens that use shutter-glasses or polarized glasses (depending on manufacturer). Processed output 2 gives an anaglyph picture for different versions of anaglyph glasses compatible with all normal screens The processed outputs are full 10bit broadcast quality images suited for transmission Processed output 1 and 2 can also display the same picture, so twice anaglyph or twice side by side Pictures by Peter Schut, courtesy of Sweetwater Production Inc.
Side by side to stereoscopic, and anaglyph In this application the source is a side-by-side image that either needs to be decoded to stereoscopic for production purposes (external 3D feed) or converted to anaglyph for viewing on a normal screen with anaglyph glasses. Applications Stereoscopic Production with flip and mirror Monitoring in Anaglyph 3D transmission of Stereoscopic into Side by Side Side by side to anaglyph
Ordering information Module: G3D100: 3Gb/s, HD, SD-SDI stereoscopic 3D production and transmission tool H3D100: HD, SD-SDI stereoscopic 3D production and transmission tool* Standard I/O: BPH17_G3D100: I/O-panel for G3D100 and H3D100 Relay bypass I/O: BHX17b_ G3D100: I/O-panel for G3D100 and H3D100 with relay bypass Fiber outputs: BPH17T2_FC/PC_G3D100: I/O panel for G-H3D100 with 2 fiber transmitters on FC/PC BPH17T2_SC_G3D100: I/O panel for G-H3D100 with 2 fiber transmitters on SC Fiber inputs: BPH17R2_FC/PC_G3D100: I/O panel for G-H3D100 with 2 fiber receivers on FC/PC BPH17R2_SC_G3D100: I/O panel for G-H3D100 with 2 fiber receivers on SC For other fiber options please contact AXON * Upgradeable to 3Gb/s
Specifications Serial Video Input Standard SD,HD and 3Gb/s SDI: SMPTE 292M, SMPTE 259M, SMPTE424 Number of Inputs 4 Connector Equalization Return Loss Serial Video Output Number of Outputs 4 Connector Signal Level DC Offset Rise/Fall Time Overshoot Return Loss Wideband Jitter BNC Typical maximum equalized length of Belden 1694A cable: 90m at 2.97Gb/s, 120m at 1.485Gb/s, and 250m at 270Mb/s > 15dB up to 1.5GHz BNC 800mV nominal 0V ±0.5V 135ps nominal < 10% of amplitude > 15dB up to 1.5GHz (typ.) > 10dB up to 3GHz (typ.) < 0.2UI Reference Input through RRC Number of Inputs 2 on SFR18, 2 on SFR08 and 1 on SFR04 Tri-level Bi-level Miscellaneous Weight SMPTE274M, SMPTE296M 600 mvp-p nominal, 75 Ohms terminated through loop PAL Black Burst ITU624-4/SMPTE318, Composite NTSC SMPTE 170M 1Vp-p nominal, 75 Ohms terminated through loop Approx. 450g Operating Temperature 0 C to +40 C Dimensions 137 x 296 x 20 mm (HxWxD) Electrical Voltage +24V to +30V Power <15 Watts