February 2019 Factory Pricing with Product Specifications

February 2019 Factory Pricing with Product Specifications

2 MILLENIUM HYBRID CONSOLES Millenium Hybrid Console (Model RS-18HRJ shown) Features: Full metering with programmable LED peak indicators 8 position switcher for external devices 3 output buses from every channel Complete monitoring section Cue logic is user programmable to function in several modes Channel on/off keypad switches are LED illuminated Easiest to wire and service in the industry Available w/ StudioHub+ or barrier strip I/O connectivity Our Hybrid Analog&Digital Consoles offer the best of both worlds with dependable analog circuitry plus dual digital outputs for Program and Audition buses and highresolution LED metering. Famous StudioHub+ connectivity on all inputs and outputs ensure fast plug-and-play installation. Removable barrier strip I/O connectors are also available. Radio Systems Millenium Hybrid Broadcast Consoles are a superb value. Thousands of RS Series Consoles have been sold since they were introduced 15 years ago, and today the Millenium Series carries on this tradition with enhanced capabilities and dramatic new styling. Take a hard look at Millenium broadcast consoles. They offer a dazzling combination of superb specifications, sleek modern styling and a wide range of features all at unexpectedly low prices! HYBRID SPECIFICATIONS Models Available RS-6H5P: 6 channel RS-6HRJ: 6 channel RS-12H5P: 12 channel RS-12HRJ: 12 channel RS-18H5P: 18 channel RS-18HRJ: 18 channel Analog Audio Inputs Type: differentially balanced instrumentation amplifiers with gain set jumpers and selectable input attenuators Level: jumper selectable gain settings to accommodate nominal input levels from -60 dbm to +10 dbm. Maximum input level: +22 dbm Impedance: 20K ohms or jumper selected Headroom: 22 dbm at any level Analog Line Outputs Type: actively balanced Level: adjustable 0 dbm to +10 dbm, maximum output +22 dbm Impedance: 100 ohms Distortion:.008% at nominal operating level, 20 Hz to 20 khz, Pgm, Aud and Mono outputs signal to noise: 88 db (or better) below +4 dbm with 0 dbv input level, 20 khz bandwidth, 600 ohm source impedance (line to line) 74 db (or better) below +4 dbm output with -50 dbv input level, 20 khz bandwidth, 150 ohm source impedance (mic to line) Frequency Response: +/-.2 db 20 Hz to 20 khz Digital Line Outputs Signal Format: AES-3 Signal Compliance: 24 bit Output Sample Rate: 48 khz/44.1 khz /32 khz-crystal Selected Digital Reference: Crystal (internal) Conversions: A/D 24-bit, Delta-Sigma, 256x oversampling RJ-45 StudioHub+ Connectors Monitor Sends Level: 1 volt rms nominal, 10 volts rms maximum, balanced RJ-45 StudioHub+ Connectors Headphone Output Level: 1 volt rms nominal, 10 volts rms maximum into 600 ohm headphone Distortion:.05% typical,.1% maximum Impedance: 50 ohms to front panel jack, 330 ohms to prefader (external amp) output Cue Output 2 watts rms into 8 ohm speaker Dimensions All consoles are 27 inches deep and 9 inches tall 6 channel: 20.75 inches long 12 channel: 32.75 inches long 18 channel: 44.75 inches long RJ-45 StudioHub+ Connectors Available Accessories Copy stand StudioHub+ Harness Source cables - specify type Spare power supply Auxiliary relay Available Options Selector logic card Enhanced remote interface card Intercom Card Four source switcher card DA Mixer Four output mix-minus boards IFB switcher Colored fader knobs Warranty 2 years parts and service Specifications subject to change without notice

3 MILLENIUM HYBRID CONSOLES Factory Part # Description Price HYBRID CONSOLES RS-6H5P 6 Channel Analog & Digital Console with 5-pin barrier strip I/O connectors 5,495.00 RS-6HRJ 6 Channel Analog & Digital Console with RJ-45 I/O connectors 5,495.00 RS-12H5P 12 Channel Analog & Digital Console with 5-pin barrier strip I/O connectors 7,495.00 RS-12HRJ 12 Channel Analog & Digital Console with RJ-45 I/O connectors 7,495.00 RS-18H5P 18 Channel Analog & Digital Console with 5-pin barrier strip I/O connectors 9,495.00 RS-18HRJ 18 Channel Analog & Digital Console with RJ-45 I/O connectors 9,495.00 HYBRID SYSTEM OPTIONS LOGIC Selector Logic Card - Adds logic to front panel selector 295.00 REMOTE Enhanced Interface Card - On/Off relay closure & 295.00 opto-isolated input control with barrier strip connectivity ROUTER Four Source Switcher Card - 1 x 4 stereo router with barrier strip connectivity 295.00 INTERCOM Intercom Kit - supports up to 4 stations with barrier strip connectivity 295.00 SPEAKER Intercom Speaker - 2-way speaker with call button with barrier strip connectivity 295.00 DUAL-A/D Dual channel A to D converter with RJ-45/StudioHub+ connectivity 595.00 FOURMIX-KIT Four Output Mix-Minus Kit - 4 mix-minuses from 6 input channels 1,095.00 SIXMIX-IN Six Input Mix-Minus Board - Adds 6 additional channels to the above 995.00 DA-MIXER 4 inputs to any of 8 outputs with barrier strip connectivity 29.00 DUAL-IFB Interrupts four mono or two stereo sends with RJ-45/StudioHub+ connectivity 395.00 DA-RJ 4 Output Stereo DA - Stereo output to up to four stereo sources 295.00 with RJ-45/StudioHub+ connectivity P&G Penny & Giles Fader Option with Cue detent (per channel) 195.00 4PDT Accessory Relay - Mechanical Type (4PDT) 50.00 SPDT Accessory Relay - Electronic Type (SPDT) 50.00

4 MILLENIUM DIGITAL CONSOLES Millenium Digital Console (Model RS-18D shown) Features: Analog or Digital capable on every channel 32 bit resolution Sample rate conversion on every input 10 extra auxiliary output buses Up to 10 fully programmable mix-minus outputs Serial RS-232 interface Sleek new front-panel styling PC connect bus routing software included Simultaneous analog or digital outputs of every bus The tradition of the Millenium Console continues with a complete digital transformation. The Millenium Digital is now 100% AES/EBU capable on every input and output. In addition, performance has been enhanced with 10 fully programmable mix-minus outputs and a serial interface to third party equipment. Millenium Digital Consoles are available in 6, 12 and 18 channel frame sizes, appropriate for any-size application. All consoles offer identical channel features, monitor stages and available option card complements. Optional I/O connectors are available for all input and output circuit boards with easy-towire 5-pin balanced removable screw terminal connectors or with StudioHub+ standard RJ-45 connectors. DIGITAL SPECIFICATIONS Measurements are made with 600 ohm loads connected to the analog outputs. 0 dbu equals 0.775 volts RMS independent of load impedance, 0 dbm equals 0.775 volts into a 600 ohm load. Reference Level: +4dBu equals -20 dbfs. FSD equals Full Scale Digital equals +24 dbu Analog Line Inputs Input Impedance: 40 k ohms, instrumentation amplifier balanced Input Level Range: jumper selectable nominal input level of -16 dbu, -6dBu or +4 dbu Input Level Trim: software trim (digital gain adjust) +/-12.5 db. Input Headroom: 20 db above nominal input Analog Monitor Inputs Input Impedance: 10 k ohms minimum, differentially balanced Input Level Range: Adjustable +4 dbu nominal, -10 dbu minimum Input Headroom: 20 db above nominal input Microphone Preamplifiers Input Impedance: 10 k ohms Source Impedance: 150 ohms Input Level Range: Selectable in 5 db steps, -62 dbu to - 22dBu Equivalent Input Noise: -128 dbu, 150 ohm source, 20 khz measurement bandwidth Input Headroom: 20 db above nominal input Analog Outputs Output Source Impedance: Utility Buses <3 ohms balanced, all others 90 ohms. Output Load Impedance: 600 ohms minimum Nominal Output Level: +4 dbu Maximum Output Level: +24 db Digital Inputs Signal Format: AES-3, S/PDIF Signal Compliance: 24 bit Input Sample Rate: 32 khz - 96 khz, sample rate conversion is provided for all digital inputs Input Level: -20 dbfs nominal Input Level Trim: software trim (digital gain adjust) +/-12.5 db. Input Headroom: 20 db above nominal input Digital Outputs Signal Format: AES-3 Signal Compliance: 24 bit Output Sample Rate: 48 khz Digital Reference: Crystal (internal) or external AES-3 input at 48 khz 100 ppm Internal Sample Rate: 48 khz Processing Resolution: 32 bit floating point DSP Conversions: A/D 24-bit, Delta-Sigma, 256x oversampling; D/A 24-bit, Delta-Sigma, 256x oversampling Latency: <1.0 ms, analog in to analog out Frequency Response Line Input to Program or Utility Output: +0 db/-0.5 db, 20 Hz to 20 khz Microphone Input to Program or Utility Output: +0dB/-.5dB, 20 Hz to 20 khz Dynamic Range Analog Input to Analog Output: 106 db referenced to FSD, 22 khz measurement bandwidth, 109 db A weighted Analog Input to Digital Output: 109 db referenced to FSD, 22 khz measurement bandwidth, 112 db A weighted Digital Input to Analog Output: 109 db referenced to FSD, 22 khz measurement bandwidth, 112 db A weighted Digital Input to Digital Output: 123 db referenced to FSD, 22 khz measurement bandwidth, 126 db A weighted Total Harmonic Distortion + Noise Analog Input to Analog Output: <0.008%, 20 Hz to 20 khz, +23 dbu input, +23 dbu output, 22 khz measurement bandwidth Analog Input to Digital Output: <0.004%, 20 Hz to 20 khz, +23 dbu input, +23 dbu output, 22 khz measurement bandwidth Digital Input to Digital Output: <0.0005%, 20 Hz to 20 khz, -1 dbfs input, -1 dbfs output, 22 khz measurement bandwidth Digital Input to Analog Output: <0.004%, 20 Hz to 20 khz, -1 dbfs input, +23 dbu output, 22 khz measurement bandwidth Isolation Program-to-Program or Program-to-Utility: >88 db, 20 Hz to 20 khz A Input to B Input, B Input to A Input, >100 db Stereo Separation Analog Program Outputs: >88 db, 20 Hz to 20 khz Warranty Warranty is two years from date of receipt. All factory nonwarranty service is guaranteed for 90 days. For full warranty information, refer to the product manual. Technical assistance is available at all times at no charge by telephone or written correspondence. Items to be returned for repair must include a Return Authorization number obtained from Radio Systems. *Specifications are subject to change without notice.

5 MILLENIUM DIGITAL CONSOLES Factory Part # Description Price DIGITAL CONSOLES RS-6D5P 6 Channel Digital Console with 5 Pin I/O connectors 5,995.00 RS-6DRJ 6 Channel Digital Console with RJ-45 I/O connectors 5,995.00 RS-12D5P 12 Channel Digital Console with 5 Pin I/O connectors 8,995.00 RS-12DRJ 12 Channel Digital Console with RJ-45 I/O connectors 8,995.00 RS-18D5P 18 Channel Digital Console with 5 Pin I/O connectors 11,995.00 RS-18DRJ 18 Channel Digital Console with RJ-45 I/O connectors 11,995.00 DIGITAL SYSTEM OPTIONS REMOTE Enhanced Interface Card - On/Off relay closure & opto-isolated input control with barrier strip connectivity 295.00 ROUTER Four Source Switcher Card - 1 x 4 stereo router with barrier strip connectivity 295.00 INTERCOM Intercom Kit - supports up to 4 stations with barrier strip connectivity 295.00 SPEAKER Intercom Speaker - 2-way speaker with call button with barrier strip connectivity 295.00 DUAL-A/D Dual channel A to D converter with RJ-45/StudioHub+ connectivity 595.00 DA-MIXER 4 inputs to any of 8 outputs with barrier strip connectivity 295.00 DUAL-IFB Interrupts four mono or two stereo sends with RJ-45/StudioHub+ connectivity 395.00 DA-RJ 4 Output Stereo DA - Stereo output to up to four stereo sources with RJ-45/StudioHub+ connectivity 295.00 P&G Penny & Giles Fader Option with Cue detent (per channel) 195.00 4PDT Accessory Relay - Mechanical Type (4PDT) 50.00 SPDT Accessory Relay - Electronic Type (SPDT) 50.00

6 MILLENIUM IP CONSOLES Millenium IP Console (Model RS-18DNET shown) Features: Livewire compatible Add Livewire nodes and software to expand to a full network system 6 or 12 channels of local audio input with A/B switching Internal mix engine for stand alone operation Internal Axia GPI for remote control operation Select any Axia input on any LCD above the 6 Axia faders 8 selectable preset scenes of Axia configurations Millenium consoles featuring Livewire begin a tradition of shared standards and plugand-play compatibility for the broadcast industry. Radio Systems Livewire consoles offer both stand-alone functionality and Livewire IP-Audio network connectivity. And because it s a STANDARD - Millenium consoles now also communicate with any Axia device or any Livewire-enabled product from a growing list of manufacturers. Local channels feature two inputs each of stereo analog inputs with mic thru line-level sensitivity. Digital inputs are AES/EBU or S/PDIF with sample rate conversion. Livewire channels feature a rotary encoder and LCD two-line read-out for the display and selection of any system-wide Livewire source. Outputs include two stereo and 10 fully programmable mix-minus buses. All buses also create Livewire streams accessible throughout the Livewire network. With Millenium Livewire consoles you can input local studio audio AND share audio between consoles or playback iplay equipped digital delivery systems - with no additional hardware! For remote analog or digital I/O add any number of Axia Livewire nodes. Finally, use any Windows PC to run iplay or PathfinderPC software for system configuration or Windows Media local audio playback.* *Qualified Ethernet Switch requred for larger system configurations IP SPECIFICATIONS (Local analog and digital input and output specifications are identical to digital console specifications) Digital Audio Inputs and Outputs Reference Level: +4 dbu (-20 db FSD) Impedance: 110 Ohm, balanced (XLR) Signal Format: AES-3 (AES/EBU) AES-3 Input Compliance: 24-bit with selectable sample rate conversion, 32 khz to 96kHz input sample rate capable. AES-3 Output Compliance: 24-bit Digital Reference: Internal (network timebase) or external reference 48 khz, +/- 2 ppm Internal Sampling Rate: 48 khz Output Sample Rate: 44.1 khz or 48 khz A/D Conversions: 24-bit, Delta-Sigma, 256x oversampling D/A Conversions: 24-bit, Delta-Sigma, 256x oversampling Latency <3 ms, mic in to monitor out, including network and processor loop Livewire is a registered trademark of TLS Corporation

7 MILLENIUM IP CONSOLES Factory Part # Description Price NETWORK CONSOLES RS-6DNET 6 Channel Digital Console with 6 channels of IP audio 12,995.00 RS-12DNET 12 Channel Digital Console with 6 channels of IP audio 14,995.00 RS-18DNET 18 Channel Digital Console with 6 channels of IP audio 16,995.00 NETWORK SYSTEM OPTIONS REMOTE Enhanced Interface Card - On/Off relay closure & opto-isolated input control with barrier strip connectivity 295.00 ROUTER Four Source Switcher Card - 1 x 4 stereo router with barrier strip connectivity 295.00 INTERCOM Intercom Kit - supports up to 4 stations with barrier strip connectivity 295.00 SPEAKER Intercom Speaker - 2-way speaker with call button with barrier strip connectivity 295.00 P&G Penny & Giles Fader Option with Cue detent (per channel) 195.00 4PDT Accessory Relay - Mechanical Type (4PDT) 50.00 SPDT Accessory Relay - Electronic Type (SPDT) 50.00 For additional replacement parts, see preceding section for the Millenium Digital Console

8 Factory Description Part # Price SPARE & REPLACEMENT CIRCUIT BOARDS Analog 6 Channel Control Board Compatible with Analog 5 Pin & StudioHub+ RJ-45 Consoles 18516 $875.00 Digital 6 Channel Control Board Compatible with Digital 5 Pin & StudioHub+ RJ-45 Consoles 18522 $925.00 IP LCD 6 Channel Control Board Compatible with IP & StudioHub+ RJ-45 Consoles 15395 $1,195.00 Analog 6 Channel Audio Board for 5 Pin 16795 $1,195.00 Compatible with Analog 5 Pin Consoles Analog 6 Channel Audio Board for StudioHub+ RJ-45 16796 $1,195.00 Compatible with StudioHub+ RJ-45 Consoles Digital 6 Channel Mother Board for 5 Pin 14904 $875.00 Compatible with Digital 5 Pin Consoles Digital 6 Channel Mother Board for StudioHub+ RJ-45 14905 $875.00 Compatible with Digital StudioHub+ RJ-45 Consoles IP Livewire 6 Channel Mother Board for StudioHub+ RJ-45 16144 $1,895.00 Compatible with IP StudioHub+ RJ-45 Consoles Digital daughter plug-in Board for Digital Consoles 15304 $250.00 Analog daughter plug-in Board for Digital Consoles 15303 $250.00 Analog Output Board with 5 Pin Connectors for Analog Consoles 14800B-A $1,195.00 Analog Output Board with 5 Pin Connectors for Hybrid Consoles 14800B-H $1,195.00 Analog Output Board with 5 Pin Connectors for Digital Consoles 14800B-D $1,195.00 Analog Output Board with StudioHub+ RJ-45 Connectors for Analog Consoles 15354B-A $1,195.00 Analog Output Board with StudioHub+ RJ-45 Connectors for Hybrid Consoles 15354B-H $1,195.00 Analog Output Board with StudioHub+ RJ-45 Connectors for Digital Consoles 15354B-D $1,195.00 Digital Output Board for 5 Pin 16786 $1,995.00 Compatible with Digital 5 Pin Consoles Digital Output Board for StudioHub+ RJ-45 16787 $1,995.00 Compatible with Digital StudioHub+ RJ-45 Consoles Digital Monitor Board for Digital Consoles 15277 $550.00 Analog Monitor Board for Analog Consoles 10887 $550.00 Console Clock/Timer for all Consoles 14401B $250.00 SPARE CONSOLE PARTS These parts are compatible with all consoles. Fader Assembly 18262 $85.00 Rotary Pot Assembly for Monitor, Headphone or Cue 11025 $45.00 Headphone Jack Assembly 7548 $25.00 Bus Select Keypad 15272 $30.00 ON/OFF Select Keypad 15273 $60.00 Monitor Select Keypad 15274 $60.00 Fader Knob - Blue 18512 $8.00 Fader Knob - Grey 15408 $8.00

9 CLOCKS & TIMING SYSTEMS CT-2002 Thin Display CT-2002 Large 4 Display CT-2002 Large 2 Display CT-2002 Remote Control CT-2002 Desktop.5 Display GPS Antenna CLOCKS & TIMING SPECIFICATIONS Time Base Thin, Desktop and 2 Inch and 4 Inch: Crystal oscillator with frequency trim provided. Power 90-246 VAC +/- 10%, 60/50 Hz (external wall wart supply included. GPS Desktop and GPS 2 Inch will maintain time of day for 10 hours during power interruption with internal 9V battery (not included). Dimensions Thin Displays - 7 Wide x 2.5 High x 1.25 Deep Desktop Displays - 7 Wide x 2.5 High x 4.5 Deep 2 Displays - 15.125 Wide x 5.25 High x 3.00 Deep 4 Displays - 24.50 Wide x 7.00 Highx 3.00 Deep Options Rack Mounts GPS Extender Cables (increases cable length from antenna up to 250 ) Windows Computer Sync Software for GPS units. Windows only. Warranty One year parts and service. CT-DESK CT-DESKGPS CT-2INCH & CT-4INCH (2 inch shown) RJ-45 Connection Serial Time Code In Serial Time Code Out Terminal Strip RJ-45 SHIELD TO GND Serial Time Code In + Serial Time Code In - Ground Serial Time Code Out - Serial Time Code Out + Ground Start Switch Stop Switch Reset Switch Mode Switch Ground Time Closure 1 Time Closure 2 Time Closure 3 Time Closure 4 Ground Down Time Closure at 0 Top-of-Hour Reset Input RJ-45 Connection GPS Antenna DIP Switches Time Zone Offset Terminal Strip Serial Time Code Out + Serial Time Code Out - Ground Start Switch Stop Switch Reset Switch Mode Switch Ground 1 Hz Out Ahead Back DC to Clocks 10 Hz to Clocks Ground Common Top-of-Hour Output - N.O. output Serial Synchronizing Data 1- Serial Time Code In + 2- Serial Time Code In - 3- Ground 4- Serial Time Code Out - 5- Serial Time Code Out + Remote Control 6- Ground 7- Start Switch 8- Stop Switch 9- Reset Switch 10- Mode Switch Clock Triggers 11- Ground 12- Time Closure #1 13- Time Closure #2 14- Time Closure #3 15- Time Closure #4 Ancillary I/O 16- Ground 17- Down Time Closure at 0 18- Top-of-Hour Input 19- Ground 20- +15V DC

10 CLOCKS & TIMING SYSTEMS Features: Simultaneous clock/up-timer/down-timer on all models All units function as a remote timer slave display High Intensity.56, 2.3 and 4 LED displays Thin, Desktop, Wall and Rack mount models Reliable, RF-immune RS-422 serial data interface GPS, SMPTE & OCXO reference options Local & parallel remote control I/R remote control included with Desktop, 2 Inch and 4 Inch models for down timing and special programming of slave models Thin Display Only 1 1/4 deep for surface mounting Simultaneous clock/up timer. Receives, displays and sends Radio Systems CT- compatible serial time mode. Time-of-Day clock functions independently or as a master when remote drive signal is available. Timer displays may be set to display remote (master) timer or function independently. Top-of-hour reset input. IR remote (optional - must be ordered separately) provides access to the following features: down timer, 12/24 clock select, RSI or SMPTE serial time code input, time-of-day offset, four time-of-day comparisons with wired remote output, top-of-hourreset offset, remote timer display. Desktop Display 1/2 high LED display in desktop cabinet Simultaneous clock/up timer. Receives, displays and sends Radio Systems CT- compatible serial time mode. Time-of-Day clock functions independently or as a master when remote drive signal is available. Timer displays may be set to display remote (master) timer or function independently. Top-of-hour reset input. IR remote (included) provides access to the following features: down timer, 12/24 clock select, RSI or SMPTE serial time code input, time-of-day offset, four time-of-day comparisons with wired remote output, top-of-hour-reset offset, remote timer display. 2 and 4 Inch Large Displays 2 and 4 high LED display for wall or rack mounting (2 high unit only) Simultaneous clock/up timer. Receives, displays and sends Radio Systems CT- compatible serial time mode. Time-of-Day clock functions independently or as a master when remote drive signal is available. Timer displays may be set to display remote (master) timer or function independently. Top-of-hour reset input. IR remote (included) provides access to the following features: down timer, 12/24 clock select, RSI or SMPTE serial time code input, time-of-day offset, four time-of-day comparisons with wired remote output, top-of-hour-reset offset, remote timer display. GPS Synchronization Option GPS Antenna in weatherproof mount available for desktop, 2 & 4 Displays Factory Part # Description Price CT2002 CLOCKS AND TIMERS CT-THIN CT-2002 Thin 325.00 CT-DESK CT-2002 Desktop 350.00 CT-DESKGPS CT-2002 Desktop w/gps Antenna 895.00 CT-2INCH CT-2002 Large 2 895.00 CT-2INCHGPS CT-2002 Large w/gps Antenna 1,495.00 CT-4INCH CT-2002 Large 4 1,195.00 CT-IR I/R Remote 40.00 CT-RACKMED Thin/Desktop Rack Mount 60.00 CT-RACKLG Large 2 Rack Mount 60.00 CT-SYNC PC Computer Sync Kit - generate or read RS serial time code 350.00 to or from a PC GPS-SYNC GPS Computer Sync Kit - generate or read GPS time code to a PC 595.00 CT-RS485 Active RS-232 to RSS-485 Converter reqired for longer than 150ft. 150.00 GPS antenna runs CT-150CABLE 150 GPS Extender Cable 90.00 CT-250KIT 250 GPS Extender Cable with CT-RS485 converters included 175.00

11 ANALOG DISTRIBUTION AMPLIFIER ADA 2x8SS Features: Front panel stereo metering Built-in silence sensor Super-low noise and distortion specifications StudioHub+ / RJ-45 connectors 110/220 volt - CE certified Front panel input selectors and audio presence indicators Rear panel full remote control and silence sense trip time and audio threshold selection Radio Systems ADA 2x8SS is the world s most fully featured audio distribution amplifier. Employ it for transparent audio distribution with super low noise and distortion specifications. Unique feature include full metering, headphone amplifier and two input switching actived by fully adjustable silence sense circuitry or rear panel remote control. This allows the ADA 2x8SS to act as an automatic studio switcher or fail safe air chain controller. ADA 2x8SS Rear Panel ANALOG DISTRIBUTION AMPLIFIER SPECIFICATIONS Channels 2 inputs (stereo) x 8 outputs (stereo) I/O and Remote Control Connectors Shielded RJ-45 (audio connectors to StudioHub+ standard) Front Panel Metering 20 segment/stereo Segments: -20 to -1 Green Segments: 0 to -2 Yellow Segments: +1 to PEAK Red Front Panel Controls and Indicators Audio Selected Indicator: A On / B On / Auto Audio Presence Indicator: A On / B On / Tripped Audio Select Control: Auto / Trip to B / Reset to A Remote Control Pins Control inputs: Auto / Reset / Test Status outputs: Auto / Trip / Input A DIP Switch Settings Trip and Return Time: 2 to 256 seconds, selectable Silent Sense Gain: -34dBu to -16dBu, selectable Input Impedance 40K ohms, balanced and bridging Input Gain 0 to +36 db (16 db, 26 db, 36 db jumper selectable) Output Impedance 60 ohms, balanced Maximum Output Level +25 dbm (into 600 ohm load) Frequency Response: +0/-.1 db 20 Hz to 20 khz Distortion: (thd + n):.002% 20 Hz to 20 khz (any output level into 600 ohm load) Distortion: (SMPTE imd):.003% (any output level into 600 ohm load) Distortion: (dim).002% (into 600 ohm load) Noise: 102 db below +4 dbm (full bandwidth into 600 ohm load) Output Channel Isolation (crosstalk) -105 db (full bandwidth) Dynamic Range 123 db Headroom 21 db above +4 dbm output (into 600 ohm load) Common Mode Rejection -50 db (full bandwidth) Dimensions 19 inch (EIA rack mount) wide x 1.75 inches (1ru) high x 7.75 inches deep (with connectors) Shipping Weight 8 pounds Factory Part # Description Price DISTRIBUTION AMPLIFIERS ADA-2x8SS Model ADA 2x8SS - with StudioHub+ RJ-45 connectors 495.00

12 DIGITAL DISTRIBUTION AMPLIFIERS DDA 1x8SH Features: Eight independent AES/EBU outputs Two front panel switched AES/EBU inputs RJ-45 connectors for AES/EBU inputs/ outputs Selectable 115/230 VAC, 50/60Hz Front panel AES/EBUinput presence indicators Also available: DDA-1x4SH with four AES/EBU outputs DDA 1x8SH Rear Panel Radio Systems DDA 1x8SH is our eight output AES/EBU non-reclocking digital distribution amplifier. Front panel input switching allows one of AES/EBU inputs to be easily routed to the eight independent outputs. Front panel indicators show which input is selected as well as presence of AES/EBU input signals. Also available as the DDA 1x4SH four output AES/EBU non-reclocking digital distribution amplifier. 1 In x 8 Out Stereo AES EBUwith front panel 2 input switching and rear panel RJ-45/StudioHub+ connectors ANALOG DISTRIBUTION AMPLIFIER SPECIFICATIONS Overall Frequency Response +/- 0.1 dbfs, 20Hz 20kHz Distortion.002% over 20Hz 20kHz, output level -20 dbfs (with 110 ohm load) Noise 123 db below 0 dbfs output level, bandwidth 20 Hz -20kHz with 110 ohm input and output termination Inputs 1 Stereo AES/EBU Nominal input -20 dbfs Maximum input 0 dbfs Dynamic Range 123 db Input Impedance 110 ohms Rear panel jumper selectable grounding options Outputs 8 Stereo AES/EBU Output Impedance 110 ohms Maximum output 0 dbfs LED Indicators audio (data) present A/B input select Physical 19 wide x 1.75 (1ru) high x 7 depth 48.3 wide x 4.4 (1ru) high x 17.8cm depth Shipping 8lbs. / 3.6 Kgs. 23 x 13 x 3 / 58.5 x 33 x 7.7cm Factory Part # Description Price DISTRIBUTION AMPLIFIERS DDA-1x8SH Model DDA 1x8 - with StudioHub+ RJ-45 connectors 895.00 DDA-1x4SH Model DDA 1x4 - with StudioHub+ RJ-45 connectors 795.00 MJ-DDA MatchJack Digital Distribution Amplifier 225.00

13 TELEPHONE HYBRID DI- Features: Dual line Hybrid functions as two separate hybrids or conference system Full automated console remote control Automatic Digital Nulling Producer and screener phone support Radio Systems digital dual-line phone hybrid provides everything you demand from Auto-answer feature a broadcast phone interface. Just a push of a dedicated front panel button answers Console to-caller cueing calls, puts callers on hold, on-the-air, or in conference mode. Digital line nulling Full line monitoring for auto call drop provides excellent separation and audio qualtiy, and microprocessor controlled and auto-nulling switching circuitry makes the DI-2000 the most featured, best sounding, and easiest Internal mix-minus generation to use hybrid you ll ever own. The DI-2000 is ideal for conference calls, with several Acoustic room echo cancellation optional and programmable modes for mixing caller outputs and cue input buses. Record outputs The unit also creates an internal inter-caller talk path, eliminating the need to supply a second mix-minus output from the console. The DI-2000 can also be programmed to operate as two separate single-line units. Specifications: Audio Inputs Impedance:10K ohm, active balanced Maximum Input Level: +21 dbm Nominal Input Level: +4 dbm Connectors: 1/4 TRS balanced phone connectors Mix-Minus Input: provides audio to caller when on air Cue Input: provides audio to caller when in answer/cue Music on Hold Input: provides audio to caller when on hold Audio Outputs Impedance: 60 ohms, active balanced Maximum Output Level: +14 dbm Nominal Output Level: +4 dbm Connectors: 1/4 TRS balanced phone connectors Record Output: mix of caller and host audio Cue Output: caller audio when in answer/cue Speaker Level: cue channel Main Output: caller audio when on air General Telco Line Inputs - 2 tip/ring standard (POTS) line inputs - ring voltage detect - off-hook line detect (for aux phone) - line drop detect (for auto disconnect) - RJ-11 (4-wire) connector Remote Control Lines Answer / cue switch control Hold switch control Air switch control Drop switch control Answer / cue lamp Hold switch lamp Air switch lamp Line 1 & 2 seize relay (C form) Console Logic Remote Lines Off switch control (answer, cue, hold, drop) On switch control (air, cue) Off lamp (ring flash, hold flash) Distortion 1% THD at 1 khz Frequency Response 300-3300 Hz +/- 1 db Noise 65 db referenced to 0 dbm phone level Transhybrid Loss 40 db minimum Power 115/230 V, 50/60 Hz, switchable Warranty 1 year parts and service Specifications subject to change without notice Factory Part # Description Price DI-2000 Dual Line Hybrid $1,295.00

ORDERING INFORMATION Warranty Warranty is two years for consoles, one year for all other products. All factory non-warranty service is guaranteed for 90 days. For full warranty information, refer to the product manual. Technical assistance is available during normal business hours at no charge by telephone or written correspondence. Items to be returned for repair must include a Return Authorization number obtained from Radio Systems. Shipping Prices are FOB Logan Township, NJ. Shipping charges are the responsibility of the buyer. The customer bears the risk of loss from the point of shipment. Upon request, Radio Systems will drop ship an order to a third party at no additional charge. Ordering Radio Systems will accept orders via mail, telephone, fax or e-mail from authorized dealers. However, in case of phone, fax or e-mail orders, we must receive the signed original marked Confirming. Power All Radio Systems products operate at 110v/220v, 60Hz/50Hz power. Certain products may require voltage selector switch to be enabled. Refer to product manual for details. Specifications Radio Systems reserves the right to make changes in specifications and/or pricing without notice. Whenever possible, however, we will make every effort to notify the dealer of the change(s). Rev. 02-05-2019