Selection matrix for electronic pressure switches Type / series 0500 050 050 05 050 0570 050 05 05 05 050 05 05 05 055 056 Page 09 09 7 0 5 5 5 5 9 9 9 9 9 9 Technology Measuring cell ceramic / thick-film titanium / SoS Variants NO NC switching output switching outputs PNP (High Side) NPN (Low Side) analogue output - 0 ma Supply voltage Adjustment range Switch point adjustability Hysteresis adjustability Max. overpressure 9.6 V 0 V 5 6 V 0 bar 0 bar 0 0 bar 0 6 bar 0 5 bar 0 0 bar 0 00 bar 0 50 bar 0 00 bar 0 600 bar at factory by customer (on site) at factory by customer (on site) window mode (settable at factory) up to x up to x Size hex A/F 0 A/F Housing zinc-plated steel material stainless steel.05 / AISI 0 aluminium / die-casted zinc Additional 7-segment and menu control functions LD switching state indicator Mx DIN N 6076-0 A connector only 05
.6 High Performance switching outputs lectronic pressure switches, High-Performance series with two switching outputs Outstanding overpressure protection (up to x) Ideal choice for mobile hydraulic applications Long service life even under high pressure change rates Wetted parts made of stainless steel and titanium ensuring excellent media compatibility All welded design, no elastomeric seal Silicon-on-sapphire technology (SoS) for highest reliability, accuracy and reliable process monitoring Very low temperature error and very good long-term stability Adjustment of switching point and hysteresis at factory 6
Technical details Type 050 NO / NO 05 NC / NC 05 NO / NC 05 NO / NO 055 NC / NC 056 NO / NC Number of transistor outputs: PNP outputs (High Side N-channel MOSFT) NPN outputs (Low Side N-channel MOSFT) Supply voltage: Idle power consumption: 9.6 VDC < 5 ma Standard-Adjustment range p nom : 0 0 bar 0 5 bar 0 00 bar 0 50 bar 0 600 bar Overpressure protection p u ) : 0 bar 00 bar 00 bar,000 bar,650 bar Burst pressure ) : 80 bar 00 bar 800 bar,000 bar,000 bar Mechanical life expectancy: Permitted pressure change rate: Switching point adjustment range: Hysteresis: Accuracy: Resolution: Switching delay: Output: 0,000,000 pulsations at rise rates to 5 bar/ms at p nom 5 bar / ms Long term stability: ±0. % FS p. a. Repeatability ) : Temperature error ) : Compensated temperature range: Temperature range media: Temperature range ambient: Wetted parts material: 00 % of the nominal pressure range (Full Scale, FS), programmable at factory 0. 99.8 % of the nominal pressure range (Full Scale, FS), programmable at factory (5 % of the switching point is set as standard) ±0.5 % of the nominal pressure range (FS) at room temperature, ±0.5 % BFSL 0. % of the nominal pressure range (FS) ON (0 0.5 s) / OFF (0 s) delay in increments of ms, irrespective of switching point, programmable at factory (specify value when ordering, otherwise default value of 0 s is set) 0.5 A transistor output with short-circuit and overvoltage protection ±0. % FS ±0.0 % / K FS -0 C +80 C (- F +76 F) -0 C +5 C (-0 F +57 F) -0 C +00 C (-0 F + F) Stainless steel.05 (AISI 0) and titanium Housing material: Stainless steel.05 (AISI 0) Insulation resistance: > 00 MΩ (500 VDC, Ri > Ω) Switching time: < ms Vibration resistance: 0 g at 000 Hz sine wave; DIN N 60068--6 Shock resistance: half sine wave 500 m/s²; ms; DIN N 60068--7 Protection class: Refer to the electrical connections MC: MC 0/0/U, N 6000-6-:005, N 6000-6-:007 Short-circuit, overvoltage and reverse polarity protection Built-in Weight: approx. 80 g (DIN 750 approx. 0 g, cable version approx. 5 g) ) Within the compensated temperature range. ) Static pressure. Dynamic value is 0 to 50 % lower. Values refer to the hydraulic/pneumatic part of the electronic pressure switch. 7
.6 050 / 05 / 05 / 05 / 055 / 056 High Performance lectrical connectors and threads switching outputs M DIN N 6076--0 A d LD Out LD Out Pin x ISO 570-A-. Out Out Pin Out Out IP67 IP67, IP6K9K x ~ 5 mm d ~ Ø mm x ~ 65 mm d ~ Ø 7 mm 00 00 DUTSCH DT0-P Cable connection Connection diagrams Pin Out Out Cable brown white black blue IP67, IP6K9K d ~ Ø mm IP67 x ~ mm (+ 0 mm bend relief) Cable length ~ m d ~ Ø mm 008 0 0 RoHS II 8 compliant PM7_.6_hex-HiP-_print.indd 8 Thread code: 0 7/6-0 UNF Thread code: 0 Thread code: 09 M 0x DIN 85-A NPT / Thread code: 0 9.9. Thread code: 0 9. Thread code: 8 NPT /8 G / DIN 85-A G / DIN N ISO 79- (DIN 85-) form.5 FKMSealing ring x ~ 7 mm Technical modifications and errors excepted. Out Out 9/6-8 UNF Thread code: FKMSealing ring M x,5 DIN N ISO 997- (DIN 85-) form Thread code:.0.5 9:
050 / 05 / 05 / 05 / 055 / 056.6 Order matrix for electronic pressure switches High Performance switching outputs Type Type PNP output (High Side), NO / NO (NO/NO) PNP output (High Side), NC / NC (NC/NC) PNP output (High Side), NO / NC (NO/NC) NPN output (Low Side), NO / NO (NO/NO) NPN output (Low Side), NC / NC (NC/NC) NPN output (Low Side), NO / NC (NO/NC) Max. overpressure) Burst pressure 0 bar 80 bar 00 bar 00 bar 00 bar 800 bar,000 bar,000 bar,650 bar,000 bar Pressure range Pressure connection Pressure unit 050 05 05 05 055 056 Adjustment range) 0 0 bar (approx. 5 PSI) 0 5 bar (approx. 6 PSI) 0 00 bar (approx.,50 PSI) 0 50 bar (approx.,60 PSI) 0 600 bar (approx. 8,700 PSI) 0 5 0 5 60 Pressure connection G / DIN N ISO 79- (DIN 85-) form G / DIN 85-A NPT /8 NPT / M 0x cyl. DIN 85-A 7/6-0 UNF 9/6-8 UNF M x,5 DIN N ISO 997- (DIN 85-) form 0 0 09 0 0 Pressure unit bar B lectrical connection M DIN N 6076--0 A Bayonet ISO 570-A-. (DIN 7585-A-.) Deutsch DT0-P Cable connection (length of cable m standard) ) lectrical connection 05XX 00 00 008 0 XXX XX B XXX Please state switching point and hysteresis when ordering. ) Static pressure, dynamic pressure 0 to 50% lower. Values refer to the hydraulic or pneumatic part of the electonic pressure switch. PM7_.6_hex-HiP-_print.indd 9 RoHS II compliant 9.0.5 9:
.7 High-quality accessories Developed for our products Aligned to our products Direct from the manufacturer 0
Mating plugs.7 Deutsch DT06-S (for DT0-P) x 0.5 mm² PUR cable ( m), IP67 00 Deutsch DT0-P --6-65-60 T AMP Superseal.5, -pin x 0.5 mm² Radox cable ( m), IP65 007 AMP Superseal.5 ---65-58 M DIN N 6076--LF, -pin x 0. mm² PUR cable ( m), IP65 00 M DIN N 6076--0 A --00-65-6 M x DIN N 607--0 D straight, -pin Terminals for wire diameter 0.75 mm² (AWG 8) 00 M DIN N 6076--0 A -6-00-65-06 ~ 5 Ø 0 Ø 0 Coupler socket M x DIN N 607--0 D Angled, -pin Terminals for wire diameter 0.75 mm² (AWG 8) 00 M DIN N 6076--0 A -6-00-65-07 ~ 5 ~ 0