MATRIX M2 Loudspeaker system
HIGH-END PRODUCTS BEYOND IMAGINATION Matrix M2 Description The Matrix is the new paradigm in sound-architecture. This speaker anticipates on the request for a high-end Home Cinema speaker system in a revolutionary way. The main point for this design was to use the possibility to aim sound. Several studies have been done on how to create a system that could fill up any room with high-end sound. This resulted in a hanging speaker almost completely made out of aluminium. Its direction can be adjusted by rotation over a vertical and over a horizontal axis. Multiple High Frequency unit array gives projection control of sound minimising unwanted reflections. This speaker is suitable for full range applications, but is recommended with the use of Kharma Matrix subwoofers. The Matrix M2 is both available as high-end active and passive version. The Matrix M2 can be used as a rear-, centre- or side-speaker in a system with the Matrix M4 as front-speakers, or as front-speaker with the Matrix M1 at the rear and/or side. Features The body of the Matrix M2 is almost completely made out of aluminium. The front panel is milled aluminium, where the hoods are sand aluminium casted. As a result the Matrix M2 is a very robust looking speaker with a revolutionary design. The Matrix M2 is both available in a passive version and in an active version. The active version is equipped with an integrated Matrix MP150 amplifier.
Drivers High / Mid-frequency: 3 x 1-inch Titanium-dome Tweeter Low-frequency: 2 x 7-inch Glass Fibre driver Technical specifications The Matrix M2 is both available as high-end active and passive version. Passive version Type: System: RMS power: Program power: Frequency range: Nominal impedance: Efficiency 2.83V/1m: Maximum SPL: Active version Type: System: RMS power: Frequency range: Input impedance: Maximum SPL: Rated power: Fuse: MAT-M2-1.1 2-way 200 Watt 400 Watt 50 Hz 22 khz 4 Ohm 91 db 115 db MAT-M2-1.1-A Active 2-way system 150 Watt 50 Hz 22 khz 220k Ohm 110 db 160 ma at 230 V 320 ma at 115 V 5 x 20 mm; 3.15 ma 250V AC; time lag T
Dimensions The physical dimensions of the Matrix M2 have no influence on the floor area at all and therefore are very suitable to use for Home Cinema systems, as rear speaker or for entertainment rooms. Moreover the freedom to aim the sound gives the possibility to change the speaker setting fast in a changing environment. Rotation freedom: 360 degrees in horizontal plane 50 degrees in vertical plane Including stand Width: Height: Depth: 571 mm / 22.48 inch 580 mm / 22.83 inch 367 mm / 14.45 inch Excluding stand Width: 500 mm / 19.69 inch Height: 215 mm / 8.46 inch Depth: 281 mm / 11.06 inch
Advice Advised amplifier The Matrix M2 is available in both a passive and an active version. This active version has an integrated Matrix MP150 amplifier. When it is preferred to not have an integrated amplifier, the Matrix MP150 can be delivered as a separate product. Advised external cable The Matrix M2 speaker can be perfectly matched with the Matrix cable series. Colour Options A Kharma product must not only have an unbelievable refined sound, which meets the needs of a true music lover, but also must have an astonishing finish to compete with the musicality of the system. Primary Stock Program The originality of this Matrix speaker consists of returning to the origin. This is reached by making this speaker almost completely out of aluminium. Two finishes of this speaker have proven their looks in the past and showing of this clear massage of returning to the origin. Therefore the available colour options in the primary stock program are blank and black anodized aluminium. The hoods are made of sandcasted aluminium with the matching colour. * Colours shown only give an indication of the real colour, contact your dealer for references.