UNIVERSITATEA DUNĂREA DE JOS DIN GALAŢI FACULTATEA DE MECANICĂ Str. Domnească nr. 111, Tel./Fax: +40 236 314463 800201 - Galaţi, România www.mec.ugal.ro 2005-2010 Lucrări publicate în reviste naţionale B+ (CNCSIS) 2010 1. Mihailescu, D., Constantin, E., Georgescu, B., Belcin V., Hardness Vickers HV 10 modifications at hyperbaric PF-position dry welding, Annual Scientific Journal of Ovidius University, Mechanical Engineering Series, Volume XII, Tom I, Ovidius University Press, Constanta, 2010, ISSN 1224-1776, pag. 227-232. 2. Iordachescu D., Iordachescu M., Georgescu B., Scutelnicu E., Ruiz-Hervias J.: Magnetarc Welding Peculiarities of Joining Thin Wall Tubes, Metalurgia nr.1, 2010, Editura FMR, ISSN 0461-957 pag. 5-12 3. Visan D., Birsan D. C., Mircea O., Mechanical Properties of the Joints in the Electroslag with Electromagnetic Agitation, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XXI, 2010, ISSN 1221 4639, pag.38-45. 4. Visan D., Nenita G., Mistodie L., Bormambet M., The Influence of Electromagnetic Agitation on Electroslag Welding, Annual Scientific Journal of Ovisius University, Mechanical Engineering Series, Volume XII, Tom I, 2010, ISSN 1224-1776, pp. 249-254. 5. Mircea O., Visan D., Birsan D. C., Residual Stresses in Welded Joints: Analytical Solution, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XXI, 2010, ISSN 1221 4639, pag.19-23. 6. Georgescu B., Corrosion phenomenon in Aluminium-Copper mechanical joints, The Annals of Dunarea de Jos University of Galati, Fascicle XIII, Welding Equipment and Technology, ISSN 1221-4639, Year XX, 2010, pag. 52-55. 7. Georgescu B., Mircea O, Indirect cold welding on cogged surfaces, The Annals of Dunarea de Jos University of Galati Fascicle XII Wleding Equipment and Technology Volume 21 (Year XXI), 2010, pag. 10-14 8. Birsan D., Scutelnicu E., Stan F., Hardness of friction stir welded joints of AA6061-T6 Aluminium alloy, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XXI, 2010, ISSN 1221-4639, pag. 15-18. 9. Birsan D. C., Visan D., Mircea O., Numerical Simulation of Transient Temperature and Von Mises Stresses of the FSW Process, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XXI, 2010, ISSN 1221 4639, pag.56-62. 10. Rusu, C.C., Mistodie, L.R, Thermography Used in Friction Stir Welding Processes, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XXI, ISSN 1221-4639, 2010, pag. 62-66, Scopus, http://www.rs.ugal.ro/annals2010.htm 11. Belcin, V., Mihailescu, D., Nenita, G., The Sonorous Emission analysis of Electric Arc Welding as the Possibility of Estimating the Mass Transfer to Short-arc Welding, Petroleum - Gas University of Ploiesti, Bulletin Technical Series, Vol. LXII, No. 2/2010, ISSN 1224-8495, pag. 25-28. 12. Ene N., Scutelnicu E., Solutions for productivity improvement of thick sections welding, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XXI, 2010, ISSN 1221-4639, pag. 23-30. 13. Ursachi L., Scutelnicu E., Welding research journals included in ISI Web of Knowledge database, The XXI, 2010, ISSN 1221-4639, pag. 66-72.
2009 14. Frincu, O., Mihailescu, D., Zburlea, I. M., Root-pass Weld Quality at MAG Mechanized in Vertical up Position PF in Naval Field, Annual Scientific Journal of Ovidius University, Mechanical Engineering Series, Volume XII, Tom I, Ovidius University Press, Constanta, 2010, ISSN 1224-1776, pag. 183-186. 15. Stanciu, L., Mihailescu, D., Mihailescu, A., Zburlea, M., Microhardness Vickers HV 1 Modifications at PC Position MAG - C Mechanized welding with Ceramic Backing, Petroleum - Gas University of Ploiesti, Technical Series, Vol. LXII, No. 2/2010, ISSN 1224-8495, pag. 135-140. 16. Zburlea, I. M., Mihailescu, D., Frincu, O., WIG Manual Welding for Pipes of Heat Rezistant Steel Type 15Mo3 Mark, Annual Scientific Journal of Ovidius University, Mechanical Engineering Series, Volume XII, Tom I, Ovidius University Press, Constanta, 2010, ISSN 1224-1776, pag. 255-258. 17. Zburlea, I. M., Mihailescu, D., Frincu, O., WIG Manual and Mechanized Welding of Heat Rezistant Steel Pipes Type 10CrMo9-10 Mark, Annual Scientific Journal of Ovidius University, Mechanical Engineering Series, Volume XII, Tom I, Ovidius University Press, Constanta, 2010, ISSN 1224-1776, pag. 259-264. 1. Scutelnicu E., Birsan D., Iordachescu M., Computational modelling of friction stir welding initial plunging phase, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XX, 2009, Pag. 21-26, ISSN 1221 4639 2. Scutelnicu E., Iordachescu M., Iordachescu D., Arc welding of dissimilar metals: FEA and experiments in case of copper carbon steel joints, Metalurgia nr.1, 2009, Pag. 16-20, Editura FMR, ISSN 0461-9579, 3. Mihăilescu, D., Stanciu, L., Mihăilescu, A., Zburlea, I. M., Researches concerning the upward butt welding in the ferrous, Revista Sudura, Nr. 6, 2009, ISSN 1453-0384, pag. 4 10 4. Mihăilescu, D., Stanciu, L., Mihăilescu, A., Microhardness Vickers HV 1 Modification at PF Position MAG - C Mechanized Welding with Ceramic Backing, The Annals of Dunărea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XX, 2009, ISSN 1221-4639, pag. 17-20. 5. Mihăilescu, D., Mihăilescu, A., Hardness Modifications at 4G+position Hyperbaric Dry Welding, The Annals of Dunărea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XX, 2009, ISSN 1221-4639, pag. 61 66 6. Mihăilescu, D., Zburlea, M., Marin, V.D., Mihăilescu, A., WIG Manual Welding of Termoresistant Steel Pipes 13CrMo4-5TC2 Mark, The Annals of Dunărea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XX, 2009, ISSN 1221-4639, pag. 71-74. f 7. Mihăilescu, D., Stanciu, L., Mihăilescu, A., Microhardness Vickers HV 1 Modification at PC Position MAG - M Pulse Arc Mechanized Welding with Ceramic Backing, The Annals of Dunărea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XX, 2009, ISSN 1221-4639, pag. 96-100 8. Iordachescu M., Iordachescu D., Scutelnicu E., A cold press welding of aluminium original theoretic and experimental approach, Metalurgia nr. 3, 2009, Pag. 5-11, Editura FMR, ISSN 0461-9579 9. Iordachescu M., Iordachescu D., Scutelnicu E., Cold press welding of aluminium original theoretic and experimental approach, Metalurgia nr. 5, 2009, Pag. 5-11, Editura FMR, ISSN 0461-95, 10. Visan D., Birsan D., Mircea O., Electro thermo-magnetic field changes in case of electro-slag welding using electromagnetic agitation, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XX, 2009, ISSN 1221 4639, pag. 91-96. 11. Mircea O., Visan D., Birsan D., Properties analysis of the X60 welded joint using unidirectional test specimens, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XX, 2009, ISSN 1221 4639, pag. 37-41. 12. Georgescu B., Iordachescu D. New coil variant for magnetic control. The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, ISSN 1221-4639, Year XX, 2009, pag. 27-30 13. Georgescu B. Procedure of welding by cold pressure on cogged surfaces. The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, ISSN 1221-4639, Year XX, 2009, pag. 57-60 14. Georgescu B., Maier C. The Model of Aluminium Deformation Cold-welded on Cogged Surfaces. The Annals of Dunarea de Jos University of Galati, Fascicle V, Technologies in Machine Building, ISSN 1221-4566, Year XXVII, 2009, pag. 269-274
2008 15. Birsan D., Visan D., Mircea O., Temperature monitoring in friction stir welding using thermovision method, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XX, 2009, ISSN 1221 4639, pag. 45-49 16. Mistodie, L.R, Joni, N., Artificial intelligence in welding processes, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XX, ISSN 1221-4639, 2009, pag. 101-107 17. Mistodie, L.R, Rusu, C.C., Voicu, C., Arc Welding Investigation Using Laser Shadowgraph Method, The XX, ISSN 1221-4639, 2009, pag. 67-71 18. Neniţă, G.M., Parameters influences on current intensity in soldering applications, The Annals of Dunărea de Jos University of Galaţi, Fascicle XII, Welding equipment and technology, Year XX, 2009, ISSN 1221-4639, pag. 85-90. 19. Neniţă, G.M., Experimental results obtained in spot pressure electricalsoldering, The Annals of Dunărea de Jos University of Galaţi, Fascicle XII, Welding equipment and technology, Year XX, 2009, ISSN 1221-4639, pag. 108-112 20. Rusu, C.C., Mistodie, L.R, Techico-Economical Considerations on Abrasive Water Jet Cutting, The XX, ISSN 1221-4639, 2009, pag. 49-57 21. Georgescu V., Iordachescu D., Georgescu B. Characteristic features in the magnetically impelled arc butt welding. Romanian Welding Society s review SUDURA, ISSN 1453-0384, Nr 3 / 2009, pag. 18-23 22. Georgescu, V., Rusu, C.C., Achievements of Robotics and Welding Department in the period 2001-2007, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XX, ISSN 1221-4639, 2009, pag. 113-120 23. Voicu, C., Mistodie, L.R, Joni, N., Rusu, C.C., TANDEM Welding Methods in Shipbuilding, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XX, ISSN 1221-4639, 2009, pag. 31-37, IndexCopernicus 24. Voicu, C., Mistodie, L.R, Rusu, C.C., Welding Arc Monitoring Using Artificial Vision, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XX, ISSN 1221-4639, 2009, pag. 75-85, IndexCopernicus 25. Voicu, C., Mistodie L.R., Rusu, C.C., Correlations between Drops Dynamics and the GMAW-P Arc Stability The Annals of Dunarea de Jos University of Galati, Fascicle V - Technologies in Machine Building, Year XXVII (XXXII), 2009, ISSN 1221-4566, pag. 419-422, 26. Voicu, C., Mistodie L.R., Rusu, C.C., Synergic Regimes Optimisation of Pulsed MIG Arc Welding, The Annals of Dunarea de Jos University of Galati, Fascicle V - Technologies in Machine Building, Year XXVII (XXXII), 2009, ISSN 1221-4566, pag. 429-433 1. Scutelnicu E., Constantin E., Iordachescu M., Ocana J. L., Naval propellers reconditioning by Friction stir welding FSW, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XIX, ISSN 1221-4639, 2008, pag. 9-14 2. Georgescu V., Iordachescu D., Scutelnicu E., Study of magnetizing systems for magnetarc welding, The XIX, ISSN 1221-4639, 2008, pag. 5-8 3. Iordachescu M., Scutelnicu E., An overview of welding in solid state, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XIX, ISSN 1221-4639, 2008, pag. 31-38 4. Iordachescu M., Scutelnicu E., Iordachescu D., Planas Roselló J., Ocaña J. L., Strain-Hardness Correlation in Aluminium Butt Cold Welded Joints, SUDURA, Year XVIII-2/2008, ISSN 1453-0384, pag. 4-10 5. Visan D., Mircea O., Birsan D., Simulation of the electromagnetic agitation of the molten pool, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XIX, 2008, ISSN 1221 4639, pag. 65-68
2007 2006 6. Mircea O., Visan D., Birsan D., Georgescu B., Thermal fields and residual stresses in welded joints: FEA and experiments, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XIX, 2008, ISSN 1221 4639, pag. 55-64 7. Georgescu B., Georgescu V. New welding techology the cold welding on cogged surfaces. The Annals of Dunarea de Jos University of Galati, Fascicle IX, Metallurgy and Materials Science, ISSN 1453-083X, Year XXV, No. 1-2008, pag. 118-122 8. Georgescu B., Mircea O., Mechanical resistance of spot cold aluminium welded joints, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XIX, 2008, ISSN 1221 4639, pag. 39-44 9. Birsan D., Visan D., Mircea O., Numerical simulation of transient temperature and Cauchy stresses of the friction stir welding process, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XIX, 2008, ISSN 1221 4639, pag. 39-44, 10. Birsan D., Iordachescu D., Ocana J.L., Vilaca P. FEM model for friction stir welding of aluminium, The XIX, 2008, ISSN 1221 4639, pag. 44-47 11. Banea M., Lucas F M da Silva, An overview of adhesively bonded joints in fibre reinforced plastic composite materials, The Annals of Dunarea de Jos University of Galati Fascicle XII, Welding Equipment and Technology, Year XVII, 2008, pag. 18-30, ISSN 1221-4639, 12. Riţiu, Şt. Ghe., Mihăilescu, D., Vişan, D., Reconditioning by Welding of Magnesium Alloy RZ5, The Annals of Dunărea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XIX/ 2008, ISSN 1221-4639, pag. 49 54 1. Constantin E., Mistodie L., Consideratii teoretice si rezultate experimentale la transferul masic prin arcul electric, Revista Asociatiei de Sudura din Romania SUDURA, ISSN 1453-0384, Nr 1 din 2007, pag. 19-27 2. Iordachescu, D., Iordachescu, M., Quintino, L., Miranda, R.M., Properties of MIG brazed joints on thin sheet, BID ISIM, 3/2007, ISSN 1453-0392, pag. 14-25 3. Scutelnicu, E., Iordachescu, M., Georgescu, B. - Dissimilar metals welding - FEA and experiments, The XVII, 2007, ISSN 1221 4639, pag. 36-40 4. Iordachescu, M., Scutelnicu, E., Quintino, L., Iordachescu, D., Vilaca, P. - Friction stir processing: tools design and microstructural characterization, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XVII, 2007, ISSN 1221 4639, pag. 19-30, 5. Georgescu, B., Iordachescu, M., Scutelnicu, E., Georgescu, V. - Aluminium deformation model in case of cold-welding on cogged surfaces, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XVII, 2007, ISSN 1221 4639, pag. 5-10, 6. Georgescu B., Georgescu V., Study of stresses and strains during cold welding on cogged surfaces. Revista Asociatiei de Sudura din Romania SUDURA, ISSN 1453-0384, Nr 2 din 2007, pag. 4-10, 1. Iordachescu, D., Quintino, L., Miranda, R., Pimenta, G., Brazed Joints Properties of the Automotive Galvanised Thin Sheets, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Year XVI, 2006, p. 10-17, ISSN 1221-4639 2. Iordachescu, D., Iordachescu, M., Mistodie, L., Raport de Cercetare Grant: A - Sistem de Monitorizare si Comanda a Proceselor de Brazare cu Arc Electric a Tablelor Subtiri pentru Autovehicule, Revista de Politica Stiintei si Scientometrie, Numar Special 2006, ISSN 1582-1218, 45 pag 3. Mihailescu, D., Mihailescu, A., Hardness Modifications at 3G-Position Hyperbaric Dry Welding, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XVII/2006, ISSN 1221-4639, pag. 52 58 4. Scutelnicu, E., Iordachescu, M., Approaches on Heat Lost of the Welded Joints, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XVII, 2006, pag. 43-47, ISSN 1221 4639
5. Iordachescu, M., Scutelnicu, E., Iordachescu, D., Fundamentals of the Process and Tools Design: Friction Stir Processing of Materials, The Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology, Year XVII, 2006, pag. 63-72, ISSN 1221 4639, 6. Visan D., Birsan D., Microstructural characteristics of the electro-slag welded joints due to the electromagnetic agitation, The Annals of Dunărea de Jos University of Galati, Fascicle XII Welding Equipment and Technology, 2006, ISSN 1221-4639, pag. 7. Mircea O., Banea D.M. Theoretical and experimental stresses and deformations of the butt welded joints, The Annals of Dunărea de Jos University of Galati, Fascicle XII Welding Equipment and Technology, 2006, ISSN 1221-4639, pag. 39-42 8. Georgescu B., Iordachescu M., Georgescu V., Varieties of cold welding on cogged surfaces, The Annals of Dunarea de Jos University of Galati, Fascicle XII, ISSN 1221-4639, Year XVII, 2006, pag. 25-29, 9. Belcin V., Nenita G. M., The molten metal at the end of electrode wire, The Annals of Dunărea de Jos University of Galati, Fascicle XII Welding Equipment and Technology, 2006, ISSN 1221-4639