Ceramic Sensor accuracy according to IEC 600: 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 600 bar Contacts, or independent PNP contacts, freely configurable Analogue output wire:... 0 ma wire: 0 ma / 0 0 V others on request Special characteristics indication of measured values on a digit LED display rotatable and configurable display module Optional versions ISversion Ex ia = intrinsically safe for gases PVDF specific versions The electronic pressure switch is the successful combination of intelligent pressure switch digital display and has been specially designed for universal usage in industry applications. The is available with flush s for viscous, pasty and highly contaminated media. As standard the offers a PNP contact and a rotable display module with digit LED display. Optional versions like e.g. an intrinsically safe version, max. four contacts and an analogue output complete the profile. Preferred areas of use are Plant and machine engineering Environmental engineering (water sewage recycling) BD SENSORS GmbH BDSensorsStraße Tel: +9 (0) 9 / 98 0 www.bdsensors.com D 999 Thierstein Fax: +9 (0) 9 / 98 info@bdsensors.de
Input pressure range Nominal pressure gauge [bar] 0 0. 0.6.6. 6 0 6 0 60 00 60 0 00 600 Nominal pressure abs. [bar] 0.6.6. 6 0 6 0 60 00 60 0 00 600 Level gauge [mh O] 6 0 6 0 60 00 60 0 00 600 Overpressure [bar] 0 0 0 0 0 00 00 00 00 00 600 800 Burst pressure [bar] 0 0 0 0 0 00 00 60 880 Vacuum resistance P N bar: unlimited vacuum resistance P N < bar: on request PVDF possible for nominal pressure ranges up to 60 bar Contact Standard PNP contact Options independent PNP contacts independent PNP contacts (possible with Mx, 8pin for... 0 ma/wire; 0... 0 V/wire on request) Max. switching current... 0 ma / and wire: contact rating ma, shortcircuit resistant; V Switch = V S V 0... 0 V / wire: contact rating ma, shortcircuit resistant Accuracy of contacts 0. % FSO Repeatability ± 0. % FSO Switching frequency max. 0 Hz Switching cycles > 00 x 0 6 Delay time 0... 00 sec max. contact for wire current signal with plug ISO 00 as well as wire current signal with ISprotection no contact possible with wire in combination with plug ISO 00 Analogue output (optionally) / Supply wire current signal... 0 ma / V S =... 6 V DC permissible load: R max = [(V S V S min ) / 0.0 A] wire current signal with... 0 ma / V S =... 8 V DC ISprotection permissible load: R max = [(V S V S min ) / 0.0 A] wire current signal... 0 ma / V S = 9... 0 V DC adjustable (turndown of span :) permissible load: R max = 00 wire voltage signal 0 0 V / V S =... 6 V DC permissible load: R min = 0 k Without analogue output V S =... 6 V DC Accuracy 0. % FSO accuracy according to IEC 600 limit point adjustment (nonlinearity, hysteresis, repeatability) with turndown of span the analogue signal is adjusted automatically to the new measuring range Thermal effects (Offset and Span) / Permissible temperatures Thermal error ± 0. % FSO / 0 K in compensated range... 8 C Permissible temperatures medium: 0... C electronics / environment: 0... 8 C storage: 0... 00 C for of PVDF the minimum permissible temperature is 0 C Electrical protection Shortcircuit protection permanent Reverse polarity protection no damage, but also no function Electromagnetic compatibility emission and immunity according to EN 66 Mechanical stability Vibration 0 g RMS (... 000 Hz) according to DIN EN 600686 Shock 00 g / msec according to DIN EN 60068 Materials Pressure port / housing standard: stainless steel.0 option for G/" open port (up to 60 bar): PVDF options for G/" flush (0.6 bar P N bar): PVDF Display housing PA 6.6, polycarbonate Seals (media wetted) standard: FKM option: EPDM (P N 60 bar) others on request Diaphragm ceramics Al O 96 % Media wetted parts, seals, diaphragm response time: < 0 msec response time: < 0 msec response time: < 0. sec response time: < msec housing stainless steel.0 stainless steel.0 PVDF pressure and level
Explosion protection (only for 0 ma / wire) Approval AX IBExU 06 ATEX 00 X zone : II G Ex ia IIC T Gb (connector) / II G Ex ia IIB T Gb (cable) Safety tech. maximum values U i = 8 V, I i = 9 ma, P i = 660 mw, C 0 nf, L i 0 µh Max. switching current 6 0 ma Permissible temperatures for environment... 0 C Connecting cables cable capacitance: signal line/shield also signal line/signal line: 00 pf/m (by factory) cable inductance: signal line/shield also signal line/signal line: µh/m 6 the real switching current in the application depends on the power supply unit Miscellaneous Display digit, red segmentled display, digit height mm, range of indication 999... +9999; accuracy 0. % ± digit; digital damping 0. 0 sec (programmable); measured value update 0.0 0 sec (programmable) Option oxygen application for P N bar: Oring in FKM Vi 6 (with BAMapproval); permissible maximum values are bar / 0 C Current consumption wire signal output current: max. ma (without contacts) wire signal output current: approx. ma + signal current wire signal output voltage: approx. ma Ingress protection IP 6 Installation position any Weight approx. 00 g Operational life 00 million load cycles CEconformity EMC Directive: 0/0/EU Pressure Equipment Directive: 0/68/EU (module A) 8 ATEX Directive 0//EU not possible with flush s 8 this directive is only valid for devices with maximum permissible overpressure > 00 bar Wiring diagrams wiresystem (current) wiresystem (current/voltage) p I supply + supply contact contact A VS p I/U supply + supply signal + contact contact contact contact A/V VS Pin configuration Electrical connection Supply + Supply Signal + (only wire) Contact Contact Contact Contact Shield Mx plastic (pin) via pressure port Electrical connections (dimensions in mm) Mx metal (pin) plug housing/ Mx plastic (8pin) 6 via pressure port ISO 00 ground contact Binder series (pin) plug housing/ cable colours (IEC 60) wh (white) bn (brown) gn (green) gy (grey) pk (pink) bu (blue) rd (red) gnye (greenyellow) cable outlet PVC Ø =.9mm cable outlet PUR Ø =.mm Mx (pin) Mx (8pin) ISO 00 Binder series (pin) cable outlet 9 9 different cable types and lengths available, permissible temperature depends on kind of cable; standard: m PVC cable (without ventilation tube, permissible temperature:... 0 C) www.bdsensors.com
Mechanical connections (dimensions in mm) G/" EN 8 G/" DIN 8 G/" EN 8 /" NPT /" NPT G/ DIN 8 G/" (DIN 8) G/" open port semiflush; M0x. 0 metric threads and others on request optionally for PN from 0.6 up to 60 bar gauge G/" flush (DIN 8) 0 possible for nominal pressure ranges PN 0 bar seal 08 BD SENSORS GmbH The specifications given in this document represent the state of engineering at the time of publishing. We reserve the right to make modifications to the specifications and materials. DS0_E_0098 Tel: +9 (0) 9 / 98 0 www.bdsensors.com Fax: pressure +9 and (0) level 9 / 98 info@bdsensors.de
Pressure gauge in bar gauge in mh O 8 8 E 8 absolute in bar Input [mh O] [bar] 0. 0 0 0 6 0.6 6 0 0 0 0.0 0 0 6.6 6 0. 0 0.0 0 0 60 6.0 6 0 0 00 0 0 0 60 6 6 0 0 0 00 0 0 0 600 60 6 0 0 00 0 0 60 6 0 0 0 00 0 0 600 6 0 0 0 X 0 Analogue output without 0 ma / wire 0 0 V / wire 0 ma / wire, adjustable Intrinsic safety 0 ma / wire Contact contact, contacts, contacts Accuracy 0. % Electrical connection Male plug Mx (pin) / plastic version Male plug Mx (8pin) / plastic version Male plug Mx (pin) / metal version Male and female plug ISO 00 Male plug Binder series (pin) Cable outlet incl. cable Mechanical connection G/" DIN 8 G/" EN 8 G/" DIN 8 G/" EN 8 9 9 9 0 E 0 0 0 T A 0 9 9 0 0 0 0 0 0 0 0 H 0 0 N 0 0 N 0 9 9 Seals FKM EPDM Pressure port Stainless steel.0 (6L) PVDF 8 B Diaphragm Ceramics Al O 96% Special version with Ex version max. contact possible with connector ISO 00 and output wire version only max. contact possible; with wire version no contact possible contacts and Mx, 8pin only possible in combination and together with... 0 ma/wire; 0... 0 V/wire on request standard: m PVC cable without ventilation tube (permissible temperature: 0 C), others on request possible for nominal pressure ranges P N 0.6 bar up to PN bar gauge, absolute on request 6 possible for nominal pressure ranges P N 0.6 bar up to P N 60 bar gauge possible for nominal pressure ranges P N 60 bar 8 PVDF only with G/" DIN 8 open (up to 60 bar) and G/" DIN 8 with flush sensor (0.6 bar P N bar), (min. permissible temperature 0 C) 9 oxygen application with FKMseal up to bar possible, flush version on request Ordering code N 0 M 0 N G/" DIN 8 with flush sensor F 0 0 G/" DIN 8 with 6 K 0 0 flush sensor G/" DIN 8 open /" NPT /" NPT standard oxygen application 9 0 0 0 0 0 9 9.0.0 0 BD SENSORS GmbH Die in diesem Dokument beschriebenen Geräte entsprechen in ihren technischen Daten dem derzeitigen Stand der Technik. Änderungen und den Austausch von Werkstoffen behalten wir uns vor.