Client Project name Order# Type Qty FEATURES AND BENEFITS Physical : Aluminum optical chamber housing Anodized aluminum flush trim Polymer recycled PVC blockout housing Available in, 2, 3 or 4 sections Die cast aluminum end caps Stainless steel hardware Frosted glass lens IP68 rated for up to (30cm), not suitable for permanent immersion applications IK0 rated 000kg max load, walk over only* Performance : Lumen maintenance 80,000 hrs [L70 @ 25 C] Lumen maintenance 60,000 hrs [L70 @ 50 C] Resolution per foot or per fixture (configured with LumenID V3 software & DMX/RDM) Operating temperatures: -40 C to 50 C [-40F to 22F] Electrical : Line voltage luminaire for 00 to 277V Power and data in cable (#6-5) IP68 push-lock connectors 5W/ft Dimming options: 0-0 volt, DMX/RDM enabled, DALI, Lumentalk, or Lutron EcoSystem Enabled CERTIFICADO No.05884, 05885 RETILAP IK0 Width of glass lens 5 2 [58mm] 3, 25 6 ", 37, 49 [33mm, 636mm, 94mm, 245mm] 7 4 [3mm] FRONT VIEW *All dimensions are preliminary SIDE VIEW 9 5 [4mm] 8 2 " [25mm] SECTION DETAIL Optical chamber Power supply housing *To meet 000kg walk over resistance requirements, cement must support 00% of the exterior surfaces of the blockout. /6 Copyright Lumenpulse 206.877.937.3003 5-year limited warranty. 26/MA/206 N.Kassabian - Rev. 75 Richardson, Suite 505 H3K G6 P.54.937.3003 F. 54.937.6289 Consult
ACCESSORIES Order separately, refer to each item s specification sheet for ordering information Control Systems: Control Boxes: LTO2 LCU LID LTN CBX Lumentouch is a wall mount DMX 52 controller keypad. Lumencue is a USB / mini SD DMX 52 controller. LumenID is a diagnostic and addressing DMX 52 controller. It must be specifi ed on all DMX applications. Refer to LID specifi cation sheet for details. Lumentone is a simple pre-programmed DMX 52 controller with a push button rotary dial and live feedback. DMX/RDM control box. Up to six power and data outputs to fi xtures or fi xture runs. Ethernet enabled option. Refer to CBX specifi cation sheet for details. Cables (required): LOILC LOIJC Leader Cable for Lumenfacade Inground;0, 25 or 50 [3m, 7.6m or 5.2m] standard lengths Jumper Cable for Lumenfacade Inground; 2, 4 or 0 [0.6m,.2m or 3m] standard lengths Inground Junction Box (optional): Lumenfacade Inground IP68 sealed junction box starter kit - LOI-JBOX order code. *Use for stand alone fixtures and/or first of run fixtures 2/6 Copyright Lumenpulse 206.877.937.3003 5-year limited warranty. 26/MA/206 N.Kassabian - Rev. 75 Richardson, Suite 505 H3K G6 P.54.937.3003 F. 54.937.6289 Consult
TYPICAL WIRING DIAGRAMS Typical Installation with Leader Cable American Color Code CE Color Code USE Green Yellow/Green Ground Black Brown Live 00-277V White Blue Neutral Red/Purple Black 0-0V / Data + Orange Grey 0-0V / Data - Optical chamber Leader cable to next fixture (For daisy-chain installation) Blockout Conduit (By others) Typical Installation with IP68 LOI-JBOX Accessory Cannot be used with ft LOI fixture LOI-JBOX Optical chamber Power & data input cable (By others) to next fixture (For daisy-chain installation) Blockout Conduit (By others) 3/6 Copyright Lumenpulse 206.877.937.3003 5-year limited warranty. 26/MA/206 N.Kassabian - Rev. 75 Richardson, Suite 505 H3K G6 P.54.937.3003 F. 54.937.6289 Consult
TYPICAL WIRING DIAGRAMS - continued Non-Dimming or Lumentalk Dimming Version % minimum dimming value with Lumentalk dimming distance between two fixtures Ex: 0.5 ft [0.5m] IP68 LOI-JBOX SECTION VIEW 00-277V Cap available: 2, 4 or 0 [0.6m,.2m or 3m] Ex: L + D = 4.5ft [.4m] Therefore 0 [3m] Dimming Version (0-0V, DALI, EcoSystem *) 0% minimum dimming value for 0-0V, % minimum dimming value for DALI, EcoSystem distance between two fixtures Ex: 0.5 ft [0.5m] IP68 LOI-JBOX SECTION VIEW 00-277V Data from controller (Cable by others) available: 2, 4 or 0 [0.6m,.2m or 3m] Ex: L + D = 4.5ft [.4m] Therefore 0 [3m] *Each Lutron EcoSystem enabled fixture has its own address; for the example shown above, there are a total of 2 EcoSystem addresses. 4/6 Copyright Lumenpulse 206.877.937.3003 5-year limited warranty. 26/MA/206 N.Kassabian - Rev. 75 Richardson, Suite 505 H3K G6 P.54.937.3003 F. 54.937.6289 Consult
TYPICAL WIRING DIAGRAMS - continued Star Layout (DMX/RDM) % minimum dimming value 00-277V CBX-ST available: 2, 4 or 0 [0.6m,.2m or 3m] Ex: L + D = 4.5ft [.4m] Data input Lumentouch 2.0 distance between two fixtures Ex: 0.5 ft [0.5m] Therefore 0 [3m] 00-240V Combined power & data input (From CBX, cable by others) 00-277V Cap Maximum 32 DMX/RDM enabled fixtures per DMX/RDM run. Daisy Chain Layout (DMX/RDM) % minimum dimming value Data output to next CBX CBX-DS CBX-DS 00-277V 00-277V available: 2, 4 or 0 [0.6m,.2m or 3m] Ex: L + D = 4.5ft [.4m] Data input Lumentouch 2.0 distance between two fixtures Ex: 0.5 ft [0.5m] Therefore 0 [3m] 00-240V Combined power & data input (From CBX, cable by others) 00-277V Cap Maximum 32 DMX/RDM enabled fixtures per DMX/RDM run. 5/6 Copyright Lumenpulse 206.877.937.3003 5-year limited warranty. 26/MA/206 N.Kassabian - Rev. 75 Richardson, Suite 505 H3K G6 P.54.937.3003 F. 54.937.6289 Consult
HOW TO ORDER LOID 00/277 2 3 4 5 6 5 Housing: Control: LOID - Lumenfacade Inground Direct View, 5W/ft A Lumenfacade Inground fixture includes x optical chamber (LOIC), x power and control box () and x recessed blockout (RBO). The LOIC, and RBO are provided according to the output/color, length and control configuration. NO - No Dimming LT - Lumentalk Dimming DIM - 0-0V Dimming 2 DMX/RDM - DMX/RDM enabled 3 DALI - DALI Dimming 4 ES - Lutron EcoSystem Enabled Dimming 5 2 3 Voltage: 00/277-00-277 volts 6 Option: ASL - Anti-slip lens Length: 2-3 /6 inches (33mm) (2.44 kg/5.38 lbs) 24-25 /6 inches (636mm) (5.23 kg/.53 lbs) 36-37 /6 inches (94mm) (7.03 kg/5.50 lbs) 48-49 /6 inches (245mm) (8.84 kg/9.49 lbs) 4 Colors and Color temperatures: 27K - 2700K 30K - 3000K 35K - 3500K 40K - 4000K RD - Red (8-0 week lead time) GR - Green (8-0 week lead time) BL - Blue (8-0 week lead time) Notes: % minimum dimming value. 2 0% minimum dimming value. 3 % minimum dimming value. Fixtures set to by fixture resolution. DMX address per fixture. 4 % minimum dimming value. DALI address per fixture. 5 EcoSystem address per fixture. % minimum dimming value. 6/6 Copyright Lumenpulse 206.877.937.3003 5-year limited warranty. 26/MA/206 N.Kassabian - Rev. 75 Richardson, Suite 505 H3K G6 P.54.937.3003 F. 54.937.6289 Consult