MC4 MC5 MC No.9 District, Zhongkai High-tech Development Zone, Huizhou City, Guangdong Province 7-MC00-00 COLOR MONITOR :Q/WP04-005 Product Implementation Standard No.:Q/WP04-005 :QB/440095-005 Product Standardization File No.:QB/440095-005 OPERATION TCL 4008-456 If you encounter any problem with your monitor, please call TCL nationwide customer service hotline 4008-456 for assistance. This apparatus is with multi functions, so to use it properly, please read the instructions carefully before your operation. MANUAL
0 0 0 0 04 05 05 05 AV 05 05 06 7 0
0
NTSC AV(BNC) S AV (BNC) AV NTSC.58 NTSC4.4 PAL AV AV (BNC).0Vp-p 0.5VRMS S.0Vp-p 65V-V Hz 0.7Vp-p MC4 MC5 MC 4cm 6cm 5cm 90x478x5(mm) 90x478x5(mm) 4x5x40(mm) kg 5kg 0kg W 60W 70W 7.5V... 4. : 0
VIDEO AUDIO REMOTE VIDEO AUDIO MC.. VIDEO AUDIO VIDEO AUDIO REMOTE 04
I O AV SVHS S SVHS S S 49 : NTSC 4 5 6 SYSTEM 6 6 VOLUME 6 VIDEO MODE ENGLISH ENGLISH LANGUAGE 05
ÆÆÆ ÆÆÆ 4 ÆÆÆ ÆÆÆ ÆÆÆ -99 S S 06
Contents 0 Warnings and Precautions 0 Features 0 Specifications 0 Remote Control 04 Connection Illustrations 05 Basic Operations 05 Turning on/off the Unit 05 AV Function 05 Picture Adjustments 05 System Settings 06 Browse Settings Packing List Main Unit - one set Remote Control Handset - one set, including two AAA batteries Operation Manual - one pc (including warranty card, quality certificate, etc.) Remote Control Cable - one pc 0
Warnings and Precautions Warnings High voltage inside! To reduce the risk of electric shock, do not remove cover (or back). Refer servicing to qualified personnel. Do not push objects of any kind into the unit as this may cause fire or short circuit and damage the unit. The unit shall not be exposed to dripping or splashing and no objects filled with liquids such as vases, shall be placed on the unit. Precautions To prevent fire or shock hazard, do not expose the unit to rain, moisture or heavy dust areas. Protect the unit, especially the screen, from being attached by hard objects. Please take care during transportation and loading/unloading. To protect the power cord, do not pull it or press it with excessive force. To avoid color abnormality, keep the unit away from the magnetic objects, such as the speaker, electromotor or transformer. Remove the power plug when the unit will not be used for a long period of time, or when it is thunder or lightning. High temperature inside may cause the damage to the unit. Please keep it well ventilated and do not block the ventilation slots and openings. Keep away from heat sources such as stove and radiator and avoid direct sunshine. Do not use chemicals such as During your operation, if there alcohol, ammonia or thinner for is something abnormal found, cleaning. If necessary, use a piece such as strange smell, or if of wet cloth or sponge with some some objects fall into the unit, diluted neutral detergent, wring dry switch off and unplug the unit for cleaning. Be sure to cut off the immediately and contact the power before your cleaning. service personnel as soon as possible. Use suitable power outlet based on power consumption of the unit. Do not share a power outlet with other electrical appliances. Place the unit on a platform strong enough for supporting. Keep it stable to avoid falling off and cause the damage. 0
Features Specifications AV NTSC.58, NTSC4.4, PAL Video:.0Vp-p; Audio: 0.5VRMS Y:.0Vp-p; C: 0.7Vp-p 65V-V Hz MC4 MC5 MC 4cm 6cm 5cm 90x478x5(mm) 90x478x5(mm) 4x5x40(mm) kg 5kg 0kg W 60W 70W Remote Control Transmitter MENU RIGHT button LEFT button UP button DOWN button Note: UP/DOWN buttons and LEFT/RIGHT buttons take effect only in the MENU mode. Battery Installation Remote Jack (When you use wire remote, the operation works only on the connected monitor.) Using the Remote Control Notes:. For better performance, once you find the operation is abnormal, please replace the batteries and have a try again.. Do not mix old and new batteries or different types.. When the batteries are to be exhausted, battery leakage may occur and cause the damage to the remote. When the operation is not sensitive enough, the battery may be low, so please change batteries immediately. 4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage. 0
VIDEO AUDIO REMOTE VIDEO AUDIO Connection Illustrations Take MC for an example:.sensor. LED indicator Camcorder Shooting Camera Shooting Camera VIDEO AUDIO VIDEO AUDIO REMOTE Remote Control 04
Basic Operations Connect the power cord first. Turning on/off the Unit AV Function Note: There is an SVHS (S-VIDEO) input jack on the unit. If your apparatus has an SVHS jack, you can connect it to the S-VIDEO input jack to achieve the high quality pictures. Please do not use the S-VIDEO jack and VIDEO jack simultaneously. Picture Adjustments VIDEO PICTURE STATUS CONTRAST BRIGHT COLOR SHARP COLOR TEMP BRIGHT NORMAL PICTURE STATUS BRIGHT CONTRST BRIGHT COLOR SHARP COLOR TEMP NORMAL CONTRAST 49 Notes: TINT is available only in NTSC mode. CONTRAST adjusts the distinction between the black and white parts of the picture. BRIGHT is used to brighten the darkest parts of the picture. Usually it is adjusted together with CONTRAST setting. 4 COLOR is used to add or reduce color. 5 SHARP improves picture details. 6 COLOR TEMP (color temperature) includes modes: NORMAL, COLD and WARM. System Settings SYSTEM VOLUME 6 VIDEO MODE VIDEO LANGUAGE SYSTEM VOLUME 6 VIDEO MODE LANGUAGE 6 ENGLISH Press twice VOLUME: Increase/Decrease the sound level by pressing UP/DOWN buttons. VIDEO MODE:, LANGUAGE: CHINESE, ENGLISH 05
Browse Settings BROWSE BROWSE TIME VIDEO CHOICE ÆÆÆ BROWSE SWITCH OFF BROWSE VIDEO CHOICE BROWSE TIME 99 VIDEO CHOICE ÆÆÆ BROWSE SWITCH OFF OFF OFF Press three times 4 VIDEO CHOICE ON OFF BROWSE BROWSE TIME VIDEO CHOICE ÆÆÆ BROWSE SWITCH OFF BROWSE BROWSE TIME 99 VIDEO CHOICE ÆÆÆ BROWSE SWITCH OFF BROWSE BROWSE TIME 99 VIDEO CHOICE ÆÆÆ BROWSE SWITCH ON Press three times BROWSE TIME: The time can be adjusted from to 99 seconds. VIDEO CHOICE:, (If both and are set to ON, you can cyclically browse these two input channels. If S-VIDEO input jack is connected, the system will automatically select S-VIDEO and as the input channels to browse.) BROWSE SWITCH: The browse function will take effect only when ON is set. Note: When you want to stop the browse function, press MENU to exit directly and then BROWSE SWITCH OFF appears on the screen. If you want to activate this function again, enter the BROWSE menu to make menu controls. 06