FOR THE SCOPE OF ACCREDITATION UNDER A2LA TO ISO/IEC 1725:25. REPORT 258 COMMERCENTRE DRIVE, LAKE FOREST, CA 9263 Project No. G1167677 Date: April 29, 214 REPORT NO. 1167677LAX-4 TEST OF ONE OUTDOOR 6 IN 1 LED PAR MODEL NO. SIXPAR 1IP RENDERED TO ELATION PROFESSIONAL 6122 S. EASTERN AVENUE COMMERCE, CA, 94 TEST: Electrical and Photometric tests as required to the IESNA test standard. STATEMENT OF LIMITATION: AUTHORIZATION: STANDARDS USED: This report must not be used by the client to claim product certification, approval, or endorsement by A2LA, NIST, or any agency of the federal government. The testing performed was authorized by signed quote number 55256. The following American National Standards or Illuminating Engineering Society of North America Test Guides were used in part or totally to test each specimen: IESNA LM-79-28: Electrical and Photometric Measurements of Solid State Lighting DESCRIPTION OF SAMPLE: The client submitted one production sample of model number SIXPAR 1IP. The sample was received by Intertek on April 25, 214, in undamaged condition and one sample was tested as received. The sample designation was LAN14425928-4. DATES OF TESTS: April 28, 214 This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to copy or distribute this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program.
SUMMARY Model No.: Description: SIXPAR 1IP Outdoor 6 In 1 LED PAR Criteria Result Total Lumen Output (Lumens) Total Power (W) 6.7 Luminaire Efficacy (LPW) 24.14 Power Factor.953 EQUIPMENT LIST Equipment Used LSI High Speed Mirror Goniometer Elgar Power Supply Yokogawa Power Analyzer Omega Environmental Monitor Tape Measure Stopwatch Model Number 644T CW1251 WT21 ibthx-w 33-428 36551 Control Last Date Calibration Number Calibrated Due Date 943 944 945 11/14/13 11/14/14 886 684 9/9/13 12/9/13 9/9/14 12/9/14 138 11/5/13 11/5/14 TEST METHODS Seasoning in Sample Orientation LED Products No seasoning was performed in accordance with IESNA LM-79. Photometric and Electrical Measurements Distribution Method A LSI Type C High Speed Model 644 Mirror Goniometer was used to measure the intensity (candelas) at each angle of distribution for each sample. Ambient temperature was measured equal to the height of the sample mounted on the Goniometer equipment. Each sample was operated at input rated voltage in its designated orientation. Each sample was allowed to stabilize for at least thirty minutes before measurements were made. Electrical measurements including voltage, current, and power were measured using the Yokogawa Power Analyzer. Some graphics were created with Photometrics Plus software. Report No. 1167677LAX-4 2 of 5 Date: April 29, 214
RESULTS OF TEST Photometric and Electrical Measurements at Ambient Temperature (25 C +/- 1 C) Distribution Method Intertek Sample No. LAN14425928-4 Base Orientation UP Input Input Input Input Voltage Current Power Power {Vac} (ma) (Watts) Factor 12. 526.6 6.7.953 Absolute Luminous Flux (Lumens) Lumen Efficacy (Lumens Per Watt) 24.14 Intensity (Candlepower) Summary at 25 C - Candelas Maximum Candela Value 9183 Angle 5 1 15 2 25 3 4 45 5 55 6 65 7 75 8 85 9 22.5 45 67.5 89 891 8931 8934 95 8982 929 8944 5441 5537 5661 5815 1834 414 122 57 45 186 387 132 5 28 1866 384 123 62 18 26 46 113 66 31 17 24 2 37 2 29 23 7 3 21 7 13 6 16 8 8 3 5 5 6 14 7 1 9 4 7 9 8949 8977 6123 2147 466 14 62 26 32 8 3 1 1 Report No. 1167677LAX-4 3 of 5 Date: April 29, 214
RESULTS OF TEST (cont'd) Illumination Plots Illuminance - Cone of Light Mounting Height: 1 ft. Isoillumination Plot Zonal Lumen Summary and Percentages at 25 C Zonal Lumens and Percentages at 25 C Zone -3-4 -6 6-9 -9 9-18 -18 Lumens 1381 142 14 14.2 1449.6.1 % Luminaire 95.2% 96.7% 99.% 1.%.4%.% 1.% Zone -1 1-2 2-3 3-4 4-5 5-6 6-7 7-8 8-9 9-1 Lumens 737.6 573.3 69.9 21.7 2.6 12.4 8. 3.3 2.9.1 % Luminaire 5.9% 39.5% 4.8% 1.5% 1.4%.9%.6%.2%.2%.% Report No. 1167677LAX-4 4 of 5 Date: April 29, 214
PICTURE (not to scale) X CONCLUSION The results tabulated in this report are representative of the actual test samples submitted for this report only. The data is provided to the client for further evaluation. Compliance to the referenced specification requirements was not determined in this report. In Charge Of Tests: Report Reviewed By: Erik Linares Technician Lighting Division Kenda Branch Engineer Lighting Division Attachment: None Report No. 1167677LAX-4 5 of 5 Date: April 29, 214