REPORT 258 COMMERCENTRE DRIVE, LAKE FOREST, CA 9263 Project No. G11918458 Date: February 2, 215 REPORT NO. 11918458LAX-1 TEST OF ONE LED MOVING HEAD MODEL NO. PLATINUM PROFILE PRO RENDERED TO ELATION LIGHTING INC. 6122 S. EASTERN AVE COMMERCE CA 94 TEST: Electrical and Photometric tests as required to the IESNA test standard. STATEMENT OF LIMITATION: AUTHORIZATION: STANDARDS USED: This report must not be used by the client to claim product certification, approval, or endorsement by A2LA, NIST, or any agency of the federal government. The testing performed was authorized by signed quote number Q5519256. The following American National Standards or Illuminating Engineering Society of North America Test Guides were used in part or totally to test each specimen: IESNA LM-79-28: Electrical and Photometric Measurements of Solid State Lighting DESCRIPTION OF SAMPLE: DATES OF TESTS: The client submitted one production sample of model number PLATINUM PROFILE PRO. The sample was received by Intertek on January 29, 215, in undamaged condition and one sample was tested as received. The sample designation was LAN15129915-4. February 2, 215 This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to copy or distribute this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program.
SUMMARY Model No.: Description: PLATINUM PROFILE PRO LED Moving Head Criteria Total Lumen Output (Lumens) Total Power (W) Luminaire Efficacy (LPW) Power Factor Result 226.82 24.96.899 EQUIPMENT LIST Equipment Used LSI High Speed Mirror Goniometer Elgar Power Supply Yokogawa Power Analyzer Temp. & RH Meter Extech Instruments Stop Watch Tape Measure Model Number 644T CW1251 WT21 971 N/A 33-43 Control Last Date Calibration Number Calibrated Due Date 943 1/26/15 2/26/15 944 VBU VBU 945 11/26/14 11/26/15 1178 139 12/22/14 12/8/14 12/22/15 12/8/15 1491 12/8/14 12/8/15 TEST METHODS Seasoning in Sample Orientation LED Products No seasoning was performed in accordance with IESNA LM-79. Photometric and Electrical Measurements Distribution Method A LSI Type C High Speed Model 644 Mirror Goniometer was used to measure the intensity (candelas) at each angle of distribution for each sample. Ambient temperature was measured equal to the height of the sample mounted on the Goniometer equipment. Each sample was operated at input rated voltage in its designated orientation. Each sample was allowed to stabilize for at least thirty minutes before measurements were made. Electrical measurements including voltage, current, and power were measured using the Yokogawa Power Analyzer. Some graphics were created with Photometrics Plus software. Report No. 11918458LAX-1 2 of 5 Date: February 2, 215
RESULTS OF TEST Photometric and Electrical Measurements at Ambient Temperature (25 C +/- 1 C) Distribution Method Intertek Sample No. Base Orientation Voltage {Vac} LAN15129915-4 UP 119.95 Current (ma) 213.4 Power (Watts) 226.8 Power Factor.899 Absolute Luminous Flux (Lumens) Lumen Efficacy (Lumens Per Watt) 24.96 Intensity (Candlepower) Summary at 25 C - Candelas Maximum Candela Value: 72,651.7 Angle 5 67476 22.5 6848 45 67682 67.5 67159 9 67323 1 15 2 25 3 35 4 45 5 55 6 65 7 75 8 85 9 2815 136 37 78 1 15 97 5 53 11 111 22232 294 11 32 127 77 92 119 3 2342 85 289 46 66 21 16 171 23981 29 31 51 23 96 8 25315 1 27 17 36 6 Report No. 11918458LAX-1 3 of 5 Date: February 2, 215
RESULTS OF TEST (cont'd) Illumination Plots Illuminance - Cone of Light Mounting Height: 1 ft. Isoillumination Plot Zonal Lumen Summary and Percentages at 25 C Zonal Lumens and Percentages at 25 C Zone -3-4 -6 6-9 -9 9-18 -18 Lumens 5469 5487 5548 17.1 5655 5.4 % Luminaire 96.6% 96.9% 98.% 1.9% 1.4%.1% 1.% Zone -1 1-2 2-3 3-4 4-5 5-6 6-7 7-8 8-9 9-1 Lumens 4822 63.2 16.5 17.5 26.2 35. 34. 28.3 44.9 5.4 % Luminaire 85.2% 11.1%.3%.3%.5%.6%.6%.5%.8%.1% Report No. 11918458LAX-1 4 of 5 Date: February 2, 215
PICTURE (not to scale) X CONCLUSION The results tabulated in this report are representative of the actual test samples submitted for this report only. The data is provided to the client for further evaluation. Compliance to the referenced specification requirements was not determined in this report. In Charge Of Tests: Report Reviewed By: Ameet Alawi Technician Lighting Division Kenda Branch Lighting Performance Team Lead Lighting Division Attachment: None Report No. 11918458LAX-1 5 of 5 Date: February 2, 215