FOR THE SCOPE OF ACCREDITATION UNDER A2LA TO ISO/IEC 1725:25. REPORT 258 COMMERCENTRE DRIVE, LAKE FOREST, CA 9263 Project No. G1167677 Original Issue Date:April 28, 214 REPORT NO. 1167677LAX-3 TEST OF ONE OUTDOOR 6 IN 1 LED PAR MODEL NO. SIXPAR 2IP Revision Note May 1, 214: Updated model number. RENDERED TO ELATION PROFESSIONAL 6122 S. EASTERN AVE. COMMERCE, CA, 94 TEST: Electrical and Photometric tests as required to the IESNA test standard. STATEMENT OF LIMITATION: AUTHORIZATION: STANDARDS USED: This report must not be used by the client to claim product certification, approval, or endorsement by A2LA, NIST, or any agency of the federal government. The testing performed was authorized by signed quote number 5519256. The following American National Standards or Illuminating Engineering Society of North America Test Guides were used in part or totally to test each specimen: IESNA LM-79-28: Electrical and Photometric Measurements of Solid State Lighting DESCRIPTION OF SAMPLE: The client submitted one production sample of model number SIXPAR 2IP. The sample was received by Intertek on April 25, 214, in undamaged condition and one sample was tested as received. The sample designation was LAN14425928-3. DATES OF TESTS: April 28, 214 This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to copy or distribute this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program.
SUMMARY Model No.: Description: SIXPAR 2IP Outdoor 6 In 1 LED PAR Criteria Total Lumen Output (Lumens) Total Power (W) Luminaire Efficacy (LPW) Power Factor Result 83.79 25.6.975 EQUIPMENT LIST Equipment Used LSI High Speed Mirror Goniometer Elgar Power Supply Yokogawa Power Analyzer Omega Environmental Monitor Tape Measure Stopwatch Model Number 644T CW1251 WT21 ibthx-w 33-428 36551 Control Last Date Calibration Number Calibrated Due Date 943 VBU VBU 944 VBU VBU 945 11/14/13 11/14/14 886 9/9/13 9/9/14 684 138 12/9/13 11/5/13 12/9/14 11/5/14 TEST METHODS Seasoning in Sample Orientation LED Products No seasoning was performed in accordance with IESNA LM-79. Photometric and Electrical Measurements Distribution Method A LSI Type C High Speed Model 644 Mirror Goniometer was used to measure the intensity (candelas) at each angle of distribution for each sample. Ambient temperature was measured equal to the height of the sample mounted on the Goniometer equipment. Each sample was operated at input rated voltage in its designated orientation. Each sample was allowed to stabilize for at least thirty minutes before measurements were made. Electrical measurements including voltage, current, and power were measured using the Yokogawa Power Analyzer. Some graphics were created with Photometrics Plus software. Report No. 1167677LAX-3 2 of 5 Original Issue Date:April 28, 214
RESULTS OF TEST Photometric and Electrical Measurements at Ambient Temperature (25 C +/- 1 C) Distribution Method Intertek Sample No. LAN14425928-3 Base Orientation UP Voltage {Vac} 12. Current (ma) 716.1 Power (Watts) 83.79 Power Factor.975 Absolute Luminous Flux (Lumens) Lumen Efficacy (Lumens Per Watt) 25.6 Intensity (Candlepower) Summary at 25 C - Candelas Maximum Candela Value 12891 Angle 5 1 2 25 3 35 4 45 5 55 6 65 7 75 8 85 9 22.5 45 67.5 122 12253 12226 12242 12461 12593 12681 177 867 7933 8131 845 2682 12 2813 2969 664 739 777 777 217 228 24 251 87 59 94 53 92 48 97 48 34 37 36 42 36 23 21 4 17 1 42 21 23 14 16 2 5 45 25 22 8 2 35 19 17 22 18 8 9 7 3 1 9 1 3 5 9 12256 12882 8547 351 82 252 93 51 33 33 19 2 18 29 1 7 1 Report No. 1167677LAX-3 3 of 5 Original Issue Date:April 28, 214
RESULTS OF TEST (cont'd) Illumination Plots Illuminance - Cone of Light Mounting Height: 1 ft. Isoillumination Plot Zonal Lumen Summary and Percentages at 25 C Zonal Lumens and Percentages at 25 C Zone -3-4 -6 6-9 -9 9-18 -18 Lumens 1988 222 2.8 299.4.4 % Luminaire 94.7% 96.3% 98.7% 1.3%.6%.% 1.% Zone -1 1-2 2-3 3-4 4-5 5-6 6-7 7-8 8-9 9-1 Lumens 819.2 119.3 34.2 28.1 21.3.2 7. 5.6.4 % Luminaire 5.% 39.% 5.7% 1.6% 1.3% 1.%.7%.3%.3%.% Report No. 1167677LAX-3 4 of 5 Original Issue Date:April 28, 214
PICTURE (not to scale) X CONCLUSION The results tabulated in this report are representative of the actual test samples submitted for this report only. The data is provided to the client for further evaluation. Compliance to the referenced specification requirements was not determined in this report. In Charge Of Tests: Report Reviewed By: Matthew Felix Lighting Technician Lighting Performance Kenda Branch Engineer Lighting Division Attachment: None Report No. 1167677LAX-3 5 of 5 Original Issue Date:April 28, 214