REPORT 3933 US ROUTE 11, CORTLAND, NEW YORK 13045 FOR THE SCOPE OF. ACCREDITATION UNDER NVLAP LAB CODE 100402-0.. Project No. G102714629 Issue Date: August 31, 2016 REPORT NO. 102714629CRT-003 TEST OF ONE LED PARKING GARAGE LUMINAIRE MODEL NO. PKGS45HT550 LED MODEL NO. SEOUL SEMICONDUCTOR SZ5-M1-W0-00 DRIVER MODEL NO. INVENTRONICS / LTC-040S210DSP RENDERED TO MAXLITE INC. 12 YORK AVENUE WEST CALDWELL, NJ 07006 Revision Note: Measured LED current adjusted to account for individual LED strings. TEST: Electrical and Photometric tests as required to the IESNA test standard. STATEMENT OF LIMITATION: AUTHORIZATION: STANDARDS USED: This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. The testing performed was authorized by signed quote number Qu-00707781. The following American National Standards or Illuminating Engineering Society of North America Test Guides were used in part or totally to test each specimen: IESNA LM-79-2008: Electrical and Photometric Measurements of Solid State Lighting ANSI NEMA ANSLG C78.377: 2012: Specifications of the Chromaticity of Solid State Lighting Products Energy Star Manufacturer s Guide Version 2.1 (2010): Guide for Qualifying Solid State Lighting Luminaires DESCRIPTION OF SAMPLE: The client submitted one prototype sample of model number PKGS45HT550. The sample was received by Intertek on June 3, 2014, in undamaged condition and one sample was tested as received. The sample designation was CRT1406031553-001B. DATES OF TESTS: June 16, 2014 through June 19, 2014. This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to copy or distribute this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program.
SUMMARY Model No.: Description: PKGS45HT550 LED Parking Garage Luminaire Criteria Total Lumen Output (Lumens) Total Power (W) Lumen Efficacy (LPW) Sphere 4591 42.97 106.8 Result Goniometer 4570 42.96 106.4 Criteria Power Factor at 347Vac Power Factor at 480Vac Current ATHD % at 347Vac Current ATHD % at 480Vac Correlated Color Temperature (CCT - K) Color Rendering Index (CRI - Ra) Color Rendering Index (CRI - R9) DUV Result 0.992 0.965 12.60 9.06 4823 72.9-16.1 0.002 Chromaticity Coordinate (x) 0.351 Chromaticity Coordinate (y) 0.361 Chromaticity Coordinate (u') 0.212 Chromaticity Coordinate (v') 0.490 Maximum In-Situ Source Temperature Point ( C) 51.7 EQUIPMENT LIST Equipment Used Yokogawa Power Analyzer LABSPHERE 3M Fluke Temperature Meter Elgar Power Supply Extech Hygro-Thermometer SORENSEN POWER SUPPLY NIST Spectral Flux Standard Source LSI High Speed Mirror Goniometer Elgar Power Supply Yokogawa Power Analyzer ExTech Hygro Thermometer Fisher Scientific M-D Building Products Extech Hygro-Thermometer Fluke Multimeter Fluke Temp Meter Model Number WT1600 W/ CDS 1100 53 II CW1251 445703 XFR 150-8 RF1024 6440 CW1251 WT210 445703 14-649-9 Smart Tool 445703 87 53 II Control Number E474 N307 T1318 T1366 E464 T1357 N1405 L112 T1355 E259 N1324 Last Date Calibrated 03/07/14 03/21/14 11/27/13 09/18/10 05/27/14 04/17/14 11/25/13 08/13/13 03/14/14 12/30/13 03/20/14 03/21/14 Calibration Due Date 03/07/15 03/21/15 11/27/14 100 hrs of use 06/27/14 04/17/15 11/25/14 08/13/14 03/15/15 12/30/14 03/20/15 03/21/15 Report No. 102714629CRT-003 2 of 8 Issue Date: August 31, 2016
TEST METHODS Seasoning in Sample Orientation LED Products No seasoning was performed in accordance with IESNA LM-79. Photometric and Electrical Measurements Integrating Sphere Method A Labsphere Model CDS 1100 CCD Array Spectroradiometer and Two Meter or Ten Foot Sphere was used to measure correlated color temperature, chromaticity coordinates, and the color rendering index for each SSL unit. Ambient temperature was measured at a position inside the sphere. Each SSL unit was operated on the client provided driver at the rated input voltage in its designated orientation. Each SSL unit was allowed to stabilize for at least thirty minutes before measurements were made. Electrical measurements including voltage, current, and power were measured using the Xitron or Yokogawa Power Analyzer. The calibration of the sphere photometer-spectroradiometer system is traceable to the National Institute of Standards and Technology. Photometric and Electrical Measurements Distribution Method A LSI Type C High Speed Model 6440 Mirror Goniometer was used to measure the intensity (candelas) at each angle of distribution for each sample. Ambient temperature was measured equal to the height of the sample mounted on the Goniometer equipment. Each sample was operated at input rated voltage in its designated orientation. Each sample was allowed to stabilize for at least thirty minutes before measurements were made. Electrical measurements including voltage, current, and power were measured using the Xitron or Yokogawa Power Analyzer. Some graphics were created with Photometrics Plus software. In-Situ Maximum Measured Power Supply Case and LED Source Point Temperature Power supply case and/or LED source operating temperature measurements were taken on one test sample per model with a thermocouple and Fluke 87 temperature meter. The SSL sample was allowed to reach thermal equilibrium for seven and a half hours before measurements were taken. Power supply or source temperature measurements were measured at the TMPPS or TS point as indicated by the included diagram in accordance with manufacturers declared hot spot location, or at a hot spot location found with a thermal camera when no diagram from the manufacturer is given. The maximum temperature was recorded for the sample. A simulated ceiling or other enclosure may be used in accordance to UL 1598 or UL 153 as applicable. Report No. 102714629CRT-003 3 of 8 Issue Date: August 31, 2016
RESULTS OF TEST Photometric and Electrical Measurements at Ambient Temperature (25 C +/- 1 C) - Integrating Sphere Met hod Intertek Sample No. CRT1406031553-001B Base Orientation UP Voltage {Vac} 347.0 480.0 Current (ma) 124.8 92.37 Power (Watts) 42.97 42.80 Power Factor 0.992 0.965 Current ATHD (%) 12.60 9.06 Luminous Flux (Lumens) 4591 Lumen Efficacy (LPW) 106.8 Correlated Color Temperature (K) 4823 CRI CRI -Ra -R9 DUV 72.9-16.1 0.002 CIE 31 Chromaticity Coordinate (x) 0.351 CIE 31 Chromaticity Coordinate (y) 0.361 CIE 76 Chromaticity Coordinate (u ) 0.212 CIE 76 Chromaticity Coordinate (v ) 0.490 Spectral Distribution over Visible Wavelengths nm mw/nm nm mw/nm nm mw/nm nm mw/nm nm 350 0.612 440 52.160 530 53.610 620 44.370 710 355 0.548 445 70.490 535 56.810 625 41.640 715 360 0.620 450 85.720 540 59.330 630 38.730 720 365 0.628 455 77.870 545 61.660 635 35.890 725 370 0.667 460 52.430 550 63.040 640 33.190 730 375 0.632 465 35.320 555 63.820 645 30.460 735 380 0.581 470 27.180 560 64.290 650 27.940 740 385 0.600 475 20.070 565 64.450 655 25.400 745 390 0.601 480 15.530 570 63.840 660 23.110 750 395 0.661 485 13.810 575 62.860 665 20.890 755 400 0.828 490 13.720 580 62.010 670 18.830 760 405 1.118 495 15.120 585 60.640 675 16.950 765 410 1.857 500 18.800 590 58.760 680 15.160 770 415 3.689 505 23.980 595 56.740 685 13.700 775 420 7.341 510 30.570 600 54.830 690 12.230 780 425 13.830 515 36.950 605 52.290 695 10.960 430 24.310 520 43.190 610 49.690 700 9.799 435 37.740 525 48.870 615 47.140 705 8.739 mw/nm 7.726 6.916 6.180 5.451 4.851 4.301 3.787 3.388 3.006 2.654 2.383 2.073 1.867 1.631 1.446 (mw/nm) Spectral Data Over Visible Wavelengths 100.000 90.000 80.000 70.000 60.000 50.000 40.000 30.000 20.000 10.000 0.000 350 400 450 500 550 600 650 700 750 800 Nanometers Report No. 102714629CRT-003 4 of 8 Issue Date: August 31, 2016
RESULTS OF TEST (cont'd) Photometric and Electrical Measurements at Ambient Temperature (25 C +/- 1 C) Distribution Method Intertek Sample No. CRT1406031553-001B Base Orientation UP Voltage {Vac} 347.1 Current (ma) 125.8 Power (Watts) 42.96 Power Factor 0.991 Absolute Luminous Flux (Lumens) 4570 Lumen Efficacy (Lumens Per Watt) 106.4 Intensity (Candlepower) Summary at 25 C - Candelas Angle 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 0 292 304 324 357 418 510 618 760 922 1136 1354 1534 1544 1112 320 84 32 7 22.5 294 305 325 364 430 522 631 772 934 1130 1340 1513 1478 1085 354 97 39 12 45 294 306 328 370 439 533 639 776 948 1142 1346 1506 1468 1071 364 96 40 9 67.5 295 307 328 367 432 526 645 789 955 1151 1365 1531 1510 1004 277 74 30 5 90 294 307 328 364 418 513 627 766 941 1140 1351 1522 1539 984 198 58 22 4 Report No. 102714629CRT-003 5 of 8 Issue Date: August 31, 2016
RESULTS OF TEST (cont'd) Illumination Plots Illuminance - Cone of Light Mounting Height: 0 ft. Isoillumination Plot Zonal Lumen Summary and Percentages at 25 C Zonal Lumens and Percentages at 25 C Zone 0-30 0-40 0-60 60-90 0-90 90-180 0-180 Lumens 327.0 732.6 2680 1889 4569 1.4 4570 % Luminaire 7.2 16.0 58.6 41.3 100.0 0.0 100.0 Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 Lumens 28.5 94.5 204.1 405.6 738.4 1209 1405 442.0 42.3 1.4 % Luminaire 0.6 2.1 4.5 8.9 16.2 26.5 30.7 9.7 0.9 0.0 Report No. 102714629CRT-003 6 of 8 Issue Date: August 31, 2016
RESULTS OF TEST (cont'd) In-Situ Maximum Measured LED Source Temperature Manufacturer Supplied Documentation: LED model identified as: Seoul Semiconductor SZ5-M1-W0-00 X Maximum Junction Temperature from LED specification (Tj) = 150 C Thermal Resistance Formula from LED specification = 4.5 C/W Maximum Forward Voltage (Vf) from LED specification = 3.3V Measured LED Current = 526mA Calculated LED Wattage = Vf x Measured LED Current = 1.736W Maximum Source Temperature (Ts) = Tj (LED Wattage x Thermal Resistance) = 142.2 C Maximum Measured Manufacturer Designated Source Temperature Maximum Measured Maximum Rated Sample No. Source Temperature ( C) Location Source Temperature ( C) CRT1406031553-001B 51.7 Per diagram 142.2 In-Situ Picture Ts In-Situ Picture Ts location Report No. 102714629CRT-003 7 of 8 Issue Date: August 31, 2016
PICTURE (not to scale) X CONCLUSION The results tabulated in this report are representative of the actual test samples submitted for this report only. The data is provided to the client for further evaluation. Compliance to the referenced specification requirements was not determined in this report. In Charge Of Tests: Report Reviewed By: Jeffrey Davis Engineering Manager Lighting Division Ryan Siddon Engineer Lighting Division Attachment: None *Results Taken From Report 101678312CRT-002 Report No. 102714629CRT-003 8 of 8 Issue Date: August 31, 2016