DRAFT IN WIDE CIRCULATION DOCUMENT DESPATCH ADVICE REF: DATE Doc: PCD 1(13563)C/ ISO 2592:2017 16 01 2019 Technical Committee: Methods of Sampling for Petroleum and its products, Gaseous Fuels and Lubricants Sectional Committee, PCD 1 Dear Sir, i) All interested members of PCDC ii) All members of Methods of Sampling for Petroleum and its products, Gaseous Fuels and Lubricants Sectional Committee, PCD 1 & its Subcommittees iii) All others interested. Please find enclosed the following document: Doc: No. Title PCD 1( 13563 )C Methods of test for petroleum and its products [P:69] - Determination of Flash and Fire Points Cleveland Open Cup Method (Second Revision of IS 1448 [P: 69]) Kindly examine this draft and forward your views stating any difficulty which you are likely to experience in your business or profession, if this is finally adopted as an Indian standard. Last date for comments: 16 February 2019 In case no comments are received or comments received are of editorial nature, you will kindly permit us to presume your approval for the above document as finalized. However, in case of comments of technical in nature are received then it may be finalized either in consultation with the Chairman, Sectional Committee or referred to the Sectional committee for further necessary action if so desired by the Chairman, Sectional Committee. Comments if any, may please be made in the format as given overleaf and mailed to the undersigned at the above address. The document is also hosted on BIS website www.bis.gov.in. Thanking you, Encl: As above. Signature : Name : V.K. Duindi Designation Sc.F & Head (PCD) Email: pcd@bis.gov.in ; pcd1@bis.gov.in
व य पक पर न मस द प रल ख प र षण स ज ञ पन स दर भ प स ड 1( 13563)C ददन क 16 01 2019 तकन क सम तत प स ड 1 प र ष त प ट र ल यम तकन क सम तत, प स ड 1 क समस त सदस य प स ड 1 क सभ उपसलमततय प ट र ल यम, क य एव स ब ध त उत प द षवभ ग पर द (प स ड स ) क सदस य र ध खन व सभ तनक य मह दय /मह दय, क प य आपक अव कन ह त तनम नल खखत मस द स ग न ह : क र मस द स ख य व षय स ख य. 1 प स ड 1( 13563 )C प ट र ल यम क ल ए पर क षण क तर क और उसक उत प द [प -]69 : फ श और फ यर प इ ट क न र रण - क ड ओप कप पद धनत (द सर प र क षण IS 1448 [P: 69]) क पय इस मस द क अव कन क अपन सम मततय यह बत त ह ए भ ज कक यदद अ तत यह म नक मस द ष ट ट र य म नक क र प म प रक ल त ह ज य त इस प अम क न म आपक व यवस य अथव क ब म क य कद न ईय आ सकत ह सम मनतय भ ज कक अ नतम नतथ : 16 February 2019 सम मततय क पय स ग न प र र प म अ हस त क ष क भ ज न यव द भवद य प रतत उपर ल खखत व क डय ड व ज ञ तनक एफ एव प रम ख(प स ड ) म : pcd@bis.org.in, pcd1@bis.org.in
FORMAT FOR SENDING COMMENTS ON BIS DOCUMENTS (Please use A4 size sheet of paper only and type within fields indicated. Comments on each clauses/sub-clauses/ table/ fig. etc be started on a fresh box. Information in Column 4 should include reasons for the comments and suggestions for modified wording of the clauses when the existing text is found not acceptable. Adherence to this format facilitates Secretariat s work). Doc. No.: PCD 1( 13563 )C TITLE: Methods of test for petroleum and its products [P: 69] - Determination of Flash and Fire Points Cleveland Open Cup Method (Second Revision of IS 1448 [P: 69]) LAST DATE OF COMMENTS: 16 February 2019 NAME OF THE COMMENTATOR/ORGANIZATION: Sl. Justification No. Clause/Subclause/ Para /table /fig. No. commented Commentator/ Organization/ Abbreviation Type of Comments (General/Editorial/ Technical) Proposed change
For BIS Use Only PCD 1(13563)C January 2019 BUREAU OF INDIAN STANDARDS Indian Standard METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS [P: 69] DETERMINATION OF FLASH AND FIRE POINTS CLEVELAND OPEN CUP METHOD (Second Revision of IS 1448 [P: 69]) ICS No. 75.080 Not to be reproduced without permission of Last date for receipt of comment is BIS or used as Standard 16 February 2019 FOREWORD (Formal clauses will be added later) This standard was first published in 1969. The Committee revised this standard in 2013 (first revision) to align it with ISO 2592:2000. Since the ISO standard is revised in 2017, the Committee has decided to revise this standard also. The text of ISO Standard has been approved as suitable for publication as an Indian Standard without deviations. Certain conventions are, however, not identical to those used in Indian Standards. Attention is particularly drawn to the following: a) Wherever the words International Standard appear referring to this standard, they should be read as Indian Standard. b) Comma (,) has been used as a decimal marker while in Indian Standards, the current practice is to use a point (.) as the decimal marker. In this adopted standard, reference appears to certain International Standard for which Indian Standard also exist. The corresponding Indian Standard, which is to be substituted in their respective places, is listed below along with their degree of equivalence for the editions indicated: International Standard Corresponding Indian Standard Degree of Equivalence ISO 3170:2004 Petroleum liquids Liquid hydrocarbons Manual Sampling IS 1447 [P:1]:2000 Petroleum and its Products - Methods of Sampling - Part 1 Manual Sampling Technically Equivalent
The technical Committee has reviewed the provision of the following Standard referred in this adopted standard and has decided that they are acceptable for use in conjunction with this standard. International Standard ISO 3171:1988 Title Petroleum liquids Liquid hydrocarbons Automatic pipeline sampling In reporting the result of a test or analysis made in accordance with this standard, if the final value, observed or calculated, is to be rounded off, it shall be done in accordance with IS 2 : 1960 Rules for rounding off numerical values (revised). *For obtaining a copy of ISO 2592:2017, please write to: Head Petroleum Coal and related Products Department, PCD Bureau of Indian Standards, Manak Bhavan, 9 Bahadur Shah Zafar Marg, New Delhi 110 002. Telefax: 011 23235432 Email: pcd@bis.org.in