VD6281. World's smallest multispectral sensor with UV and light flicker detection. Data brief. Features. Applications. Description

Similar documents
STEVAL-MKI128V5. ST MEMS sensor module. Applications. Features. Description

Description. Table 1. Device summary. Order codes Temperature range [ C] Package Packing. LPS2HBTR -30 to +105 HLGA - 10L

ECMF4-20A42N10. Common mode filter with ESD protection for high speed serial interface. Features. Applications. Description

VG5761, VG5661 VD5761, VD5661 Data brief

ST25TV02K ST25TV512. NFC Type 5 / RFID tag IC with EEPROM up to 2-Kbit, product identification and protection. Features

Obsolete Product(s) - Obsolete Product(s)

STEVAL-TDR007V1. 3 stage RF power amplifier demonstration board using: PD57002-E, PD57018-E, 2 x PD57060-E. Features. Description

STPTIC STPTIC. Parascan tunable integrated capacitor. Applications. Description. Features STPTIC. Benefit

STEVAL-ILL043V1. High end, 75 W high power factor flyback LED driver based on the L6562A with two dimmable strings. Features.

Obsolete Product(s) - Obsolete Product(s)

L7208. Portable consumer electronics spindle and VCM motor controller. General features. Spindle driver. Description. VCM driver.

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s)

STEVAL-ICB004V1. Advanced resistive touchscreen controller demonstration board based on the STMPE811. Features. Description

VT5365. Single-chip optical mouse sensor for wireless applications. Features. Applications. Technical specifications. Description.

Order code Package Connection. SPDC400FC12M0.60 Open frame Comb. October 2007 Rev 1 1/9

STEVAL-ILL015V1. High brightness RGB LED array with LED error detection based on the STP24DP05 and STM32. Features. Description

Lead free and RoHS package. High reduction of parasitic elements through integration Complies with IEC level 4 standards:

STEVAL-IHM043V1. 6-step BLDC sensorless driver board based on the STM32F051 and L6234. Features. Description

STEVAL-ILL029V1. Front panel demonstration board based on the STLED325 and STM8S. Features. Description

STEVAL-CCM003V1. Graphic panel with ZigBee features based on the STM32 and SPZBE260 module. Features. Description

AN3075 Application note

ROBOT-M24LR16E-A. Evaluation board for the M24LR16E-R dual interface EEPROM. Features. Description

TN1205 Technical note

Obsolete Product(s) - Obsolete Product(s)

BAL-NRF01D3. 50 ohm balun transformer for 2G45 ISM matched Nordic s chipset: nrf24le1 QFN32, nrf24ap2-1ch and nrf24ap2-8ch. Features.

STEVAL-SPBT2ATV2. USB Dongle for the Bluetooth class 2 SPBT2532C2.AT module. Features. Description

A scalable approach to your body, networking and security platforms. Description. Table 1. Device summary

UM2049 User manual. DSI to LCD adapter board. Introduction

2 x 58 W high frequency ballast for T8 fluorescent tubes based on L6562A, L6569, and STL11NM60N in PowerFlat HV package

STEVAL-ILL037V1. Demonstration board for the HVLED805 IC for LED power supply. Features. Description

Obsolete Product(s) - Obsolete Product(s)

Main components Proximity and ambient light sensing (ALS) module

STDP4020. DisplayPort receiver. Features. Applications

IMPORTANT NOTICE. Company name - STMicroelectronics NV is replaced with ST-NXP Wireless.

STEVAL-ISB008V1. Standalone USB Li-Ion battery charger demonstration board based on the STw4102 and STM32F103C6. Features.

STEVAL-IHM021V W, 3-phase inverter based on the L6390 and UltraFASTmesh MOSFET for speed FOC of 3-phase PMSM motor drives. Features.

STEVAL-IHM025V1. 1 kw 3-phase motor control demonstration board featuring the IGBT SLLIMM STGIPL14K60. Features. Description

Multi-channel LED driver with integrated boost controller for medium, large LCD panel backlight based on LED7708 and STM32F103C6T6A

AN4540 Application note

STEVAL-ILH004V1. 70 W electronic ballast for metal halide lamp (HID) based on the L6382D5 and ST7FLITE49K2. Features. Description

STDP2500. Mobility DisplayPort (MyDP) to DP converter. Features. Applications

STEVAL-CCA043V1. 25 Watt mono BTL class-d audio amplifier demonstration board based on the TDA7491MV. Features. Description

AN4184 Application note

Order code Marking Package Packing. STA5630TR STA5630 VFQFPN32 Tape and reel STA5630ATR (1) September 2013 Doc ID Rev 4 1/8

AN2421 Application note

STEVAL-IME002V1. Multi-lead electrocardiogram (ECG) and body impedance demonstration board. Features. Description

STW High voltage fast-switching NPN power transistor. Features. Application. Description

GM68020H. DisplayPort receiver. Features. Applications

STDP2650 Advanced DisplayPort to HDMI converter Features Applications

Main components. The purpose of this design tip is to introduce the integration guidelines of the LPS33HW pressure sensor in the final application.

March 2012 Doc ID Rev 1 1/4

STA3005. Dual-IF AM/FM digital radio receiver. Feature summary. Order codes

USBLC6-4SC6Y. Automotive very low capacitance ESD protection. Features. Applications. Description. Benefits. Complies with the following standards

STEVAL-ILH005V W electronic ballast for HID lamps based on the L6562A and ST7LITE39F2. Features. Description

GM60028H. DisplayPort transmitter. Features. Applications

STEVAL-LLL007V1. Evaluation kit for the LED channel low quiescent current LED driver. Data brief. Features. Description

STEVAL-IHM008V1. BLDC & AC motor control Power board SEMITOP 2 1kW. Features. Applications

EVALPM8803-FWD. EVALPM8803-FWD: IEEE802.3at compliant demonstration kit with synchronous active clamp forward PoE converter. Features.

FLI30x02 Single-chip analog TV processor Features Application

STANC0. Stereo HD-PA digitally programmable active noise cancelling audio engine. Features. System. Input and output.

Obsolete Product(s) - Obsolete Product(s)

STEVAL-CCH002V2. HDMI and video switches demonstration board. Features. Description

TN1190 Technical note

GM69010H DisplayPort, HDMI, and component input receiver Features Applications

PRODUCT / PROCESS CHANGE INFORMATION. 1. PCI basic data. 2. PCI Team. 3. Change. 3.1 Category 3.2 Type of change 3.3 Manufacturing Location

STEVAL-IHT005V2. Demonstration board with full 3.3 V ACS/Triac control using the STM32F100. Description. Features

IEC compliant smart meter system for AMI applications based on STM32, ST7570 PLM, and STPMC1/STPMS1 chipset

STEVAL-IKR001V7D. Sub Ghz transceiver daughterboard with power amplifier based on the SPIRIT1. Features. Description

PRODUCT / PROCESS CHANGE NOTIFICATION. 1. PCN basic data

STV6110A. 8PSK/QPSK low-power 3.3 V satellite tuner IC. Description. Features

STEVAL-IHM024V W 3-phase inverter using the L6390 and STGDL6NC60DI for vector control. Features. Applications. Description

EVAL-RHF1009A. EVAL-RHF1009A product evaluation board. Description. Features

STV6417 R/C/Pr, G/C, B/Pb Switches + Filter. C, Y, CVBS/Y Switches + Filter. Audio Switches Volume Control AUDIO R SLOW BLANK

Main components Proximity and ambient light sensing (ALS) module

EMIF02-USB05F2 IPAD. 2 line EMF filter including ESD protection. Main application. Description. Pin configuration (bump side) Benefits

PRODUCT / PROCESS CHANGE INFORMATION. 1. PCI basic data

May 2015 DocID Rev 6 1/5

STEVAL-MKI126V2. MEMS microphone system evaluation board based on the STA321MPL and MP34DB01. Description. Features

NFC card reader expansion board based on ST25R3911B for STM32 Nucleo. Description

STEVAL-MKI126V3. STSmartVoice demonstration board based on MP34DT01. Description. Features

Viper0P ACH termic issue fix. A. Mariani

STEVAL-ISA121V1. Wide range single-output demonstration board based on the VIPER37LE. Features. Description

Bluetooth Low Energy expansion board based on the SPBTLE- RF module for STM32 Nucleo. Description

UM0534 User manual. STEVAL-MKI014V1 demonstration kit for the LIS344ALH. Introduction

STEVAL-IHM038V1. BLDC ceiling fan controller based on the STM32 and SLLIMM-nano. Description. Features

TN0885 Technical note

USBLC6-2SC6Y. Automotive very low capacitance ESD protection. Features. Applications. Description. Benefits. Complies with the following standards

M24SR-DISCOVERY. Discovery kit for the M24SR series Dynamic NFC/RFID tag. Features

PRODUCT INFORMATION LETTER

Obsolete Product(s) - Obsolete Product(s)

STEVAL-IFN003V1. PMSM FOC motor driver based on the L6230 and STM32F103. Features. Description

Wearable sensor unit reference design for fast time to market. Description

PRODUCT / PROCESS CHANGE NOTIFICATION. 1. PCN basic data. 2. PCN Team. 3. Change

STEVAL-ILL019V1. 32 W offline RGGB LED driver with individual LED channel brightness regulation. Features. Description

EMIF C2 IPAD. 6 line EMI filter and ESD protection. Main product characteristics. Description. Order Code. Benefits

STDP4320 DisplayPort 1.2a splitter Features Applications

M24LR04E-R, M24LR16E-R, M24LR64E-R Errata sheet

Main components Narrow-band OFDM power line networking PRIME compliant system-on-chip

PRODUCT TERMINATION NOTIFICATION

Transcription:

Data brief World's smallest multispectral sensor with UV and light flicker detection Features Miniature optical module 1.83 x 1.0 x 0.55 mm Optical BGA, 6-balls, reflowable package Operates with phone coverglass on top ALS operation with 6 color channels Advanced interferometric filters (UVA, red, green, blue, near IR, and clear) with 6 individual readouts 24-bit ADC Excellent sensitivity down to 0.01 Lux UV-A channel for indoor/outdoor and artificial/natural light discrimination Light flicker extraction Innovative readout architecture to extract light characteristic (AC flicker) on top of the ALS value (under patent) From 100 Hz to 2 khz frequency detection Software driver provided by ST I2C interface up to 1 Mbit/s (Fast mode plus) with GPIO1 interrupt ball Perfectly suited for mobile applications 1.8 V power supply 450 µa consumption active (5 channels) Operating temperature -30 to 85 C Applications True tone color-sensing for phone screen or camera white balance assistance Lux information UV-A information Indoor/outdoor information Light frequency extraction for flicker correction assistance Description The (1.83 x 1.0 x 0.55 mm) is the smallest 6-channel, ambient light sensor (ALS) on the market. Light measurement is fast and accurate thanks to an individual ADC and readout circuitry for each color channel. The uses high-end interferometric filters with precise responses to assist camera white-balance in less than 8 ms. The device also employs a UV channel for natural or artificial light detection. With a patented architecture and a high-performance photodiode design, the can extract light flickering frequencies to enhance camera experience and remove banding effects. The is the only sensor able to extract different light flicker waveforms including combined lights or contemporary LED sources with square signals. DB3845 - Rev 1 - February 2019 For further information contact your local STMicroelectronics sales office. www.st.com

Technical specifications 1 Technical specifications Figure 1. System block diagram Figure 2. Outline 3D drawing and maximum field of view DB3845 - Rev 1 page 2/6

Package information 2 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. DB3845 - Rev 1 page 3/6

Ordering information 3 Ordering information The is currently available in the format below. More detailed information is available on request from your STMicroelectronic sales channel. Table 1. Order codes Order code Package Description TF46/1 Optical WLCSP BGA 6-ball Tape and reel (5000 units in a reel) DB3845 - Rev 1 page 4/6

Revision history Table 2. Document revision history Date Version Changes 07-Feb-2019 1 Initial release DB3845 - Rev 1 page 5/6

IMPORTANT NOTICE PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries ( ST ) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. 2019 STMicroelectronics All rights reserved DB3845 - Rev 1 page 6/6