LCD TV PLASMA TV OWNER S MANUAL

Similar documents
LCD TV PLASMA TV OWNER S MANUAL

LCD TV OWNER S MANUAL

LCD TV PLASMA TV OWNER S MANUAL

HD Digital Set-Top Box Quick Start Guide

Evolution Digital HD Set-Top Box Important Safety Instructions

LCD TV OWNER S MANUAL

CAUTION RISK OF ELECTRIC SHOCK NO NOT OPEN

LCD TV OWNER S MANUAL

LCD TV PLASMA TV OWNER S MANUAL

2.0 Wall Mount TV Soundbar Instruction Manual

LCD TV OWNER S MANUAL

LCD TV / DVD Combo OWNER S MANUAL

55" Curved Ultra HD LED TV User s Guide for Model TU5587B v For the most up-to-date version of this User s Guide, go to

LCD TV PLASMA TV OWNER S MANUAL

HD Digital MPEG2 Encoder / QAM Modulator

HD Digital MPEG2 Encoder / QAM Modulator Get Going Guide

LCD TV OWNER S MANUAL LCD TV MODELS

ENGLISH OWNER S MANUAL LCD TV / LED LCD TV. Please read this manual carefully before operating your set and retain it for future reference.


OWNER S MANUAL LCD TV. Please read this manual carefully before operating your set and retain it for future reference.

PREPARATION FRONT PANEL CONTROLS. This is a simplified representation of the front panel. The image shown may be somewhat different from your set.

HD Digital MPEG2 Encoder / QAM Modulator

OWNER S MANUAL LCD TV MODELS PLASMA TV MODELS

DVB is a registered trademark of the DVB Project PLASMA TV MODELS 50PY3DF* 60PY3DF* 42PB4D* 50PB4D* LCD TV MODELS 32LB9D* 42LB9DF* 47LB9DF* 52LB9DF*

OWNER S MANUAL PLASMA TV MODELS LCD TV MODELS

Introduction. Important Safety Instructions

ATTACHING & REMOVING THE BASE

OWNER S MANUAL LED TV. Please read this manual carefully before operating your set and retain it for future reference.

LCD TV OWNER S MANUAL

28 4K LED monitor. User Manual M284K

Register your product and get support at SDV5122/27. EN User manual

PREPARATION FRONT PANEL CONTROLS. This is a simplified representation of the front panel. The image shown may be somewhat different from your set.

2.4 GHz WIRELESS VIDEO SENDER SYSTEM MODEL: VS6234

PLASMA TV OWNER S MANUAL

LED TV MODEL NO.: NE22K5BG. Please read this manual carefully before installing and operating the TV. Keep this manual handy for further reference

ZvBox 150. HD video distribution over COAX Get Going Guide

ID Number: 4616: 26LC7D(26LC7D-AB) 4624: 32LC7D(32LC7D-AB) 4623: 37LC7D(37LC7D-AB) 4622: 42LC7D(42LC7D-AB)

Congratulations on purchasing your Eviant Portable Digital TV.

17 19 PROFESSIONAL LCD COLOUR MONITOR ART

Operating Instructions

LED LCD TV / LCD TV OWNER S MANUAL. Please read this manual carefully before operating your set and retain it for future reference.

ZVOX AccuVoice TV Speaker Model AV203

LCD TV PLASMA TV OWNER S MANUAL

ZVOX AccuVoice TV Speaker Model AV203

USER MANUAL. 27 Full HD Widescreen LED Monitor L27ADS

LCD TV PLASMA TV OWNER S MANUAL

Full High Definition LCD TV USER MANUAL

LCD VALUE SERIES (32 inches)

39 WIDESCREEN LED TV MODEL NO.: SP-LED40 USER MANUAL

E325 Series User Guide

39" 1080p LCD Television PLCD3992A

9.7-INCH VALUE LED MONITOR

Installation Manual VIP 1003

User Guide. 42" LED-LCD, 60Hz 1080p NS-42E760A12

INSTALLATION MANUAL VIP 1903 / VIP 1903 T VIP 1963 / VIP 1963 T

E246 Series User Guide

Monochrome Video Monitors


E246 Series User Guide

PACE DC700X SET-TOP CUSTOMER SERVICE AND INSTALLATION GUIDE

USER MANUAL. 22" Class Slim HD Widescreen Monitor L215DS

2.4 GHz WIRELESS VIDEO SECURITY SYSTEM

27'' Full HD LED Monitor KALED27MONSC Quick Start Guide

TS2.8 Sub OWNER S MANUAL

E405 Series User Guide

X50 Series User Guide

PLASMA TV OWNER S MANUAL

USER MANUAL. 27 Full HD Widescreen LED Monitor L270E

ZVOX AccuVoice TV Speaker MODEL AV150.

PLL2210MW LED Monitor

U65 Series User Guide

16 WIDESCREEN LED TV MODEL NO.: SP-LED16 USER MANUAL

USER MANUAL. 28" 4K Ultra HD Monitor L28TN4K

TV CHANNEL INSTALLATION

Disclaimer. Trademarks. Copyright. Contact Us Control4 Corporation S. Election Road Salt Lake City, UT USA

HDMI 5x1 Switch B-240-HDSWTCH-5X1 INSTALLATION MANUAL

PL2410W LCD Monitor USER'S GUIDE.

AUTO - SCANNING WITH DIGITAL CONTROL LCD COLOR MONITOR FS-L1903C. User manual (Rev.01) SMITHS HEIMANN

35 INCH CURVED QHD LED MONITOR

User Manual High Definition Digital Set Top Box DVBT9070 Please read this User Manual carefully to ensure proper use of this product and keep this man

OWNER'S MANUAL MODEL: DTV-2000 STANDBY/ON

Contents. Contents. Important safety instructions Wall mounting the set. Important safety instructions Wall Mounting the Set

USER MANUAL Full HD Widescreen LED Monitor L215IPS

15 LCD Television FLM-1512

1080p UPCONVERTING HDMI

USER MANUAL Full HD Widescreen LED Monitor L215ADS

Q-TV2. User Manual. for Screens

UNFOLD THE BASE. Quick Start Guide CONTENTS INSTALLING LCD TV ON THE WALL

VIZIO. QUICK START GUIDE Model: E390-B1

LED LCD TV / LCD TV OWNER S MANUAL. Please read this manual carefully before operating your set and retain it for future reference.

32" LED HDTV User s Guide for Model TE3215 v For the most up-to-date version of this User s Guide, go to

SAFETY WARNINGS AND GUIDELINES

PLL1920M LED LCD Monitor

Wired to Wireless Camera Converter

4 PORT HDMI SWITCH

Wireless 4 Channel Receiver with 2 Night Vision cameras

23-INCH WIDE TFT-LED MONITOR

User Guide 26" LED TV NS-26E340A13


VIZIO MODELS E320AR E420AR QUICK START GUIDE FULL USER MANUAL AVAILABLE AT VIZIO.COM

Transcription:

LCD TV PLASMA TV OWNER S MANUAL LCD TV MODEL PLASMA TV MODELS 6LG0 7LG50 4PG0 50PG60F LG0 4LG50 50PG0 60PG60F 7LG0 47LG50 4LG0 5LG50 4PG0 4PG0C 50PG0 50PG0C LG60 LG70 7LG60 4LG70 4LG60 47LG70 47LG60 5LG70 5LG60 ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. P/NO : SAC070800 (07-REV00) www.lgusa.com / www.lg.ca / www.lgcommercial.com

WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING/CAUTION TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. FCC NOTICE Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 5 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/tv technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment. NOTE TO CABLE/TV INSTALLER This reminder is provided to call the CATV system installer s attention to Article 80-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. CAUTION Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user s authority to operate this product

SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the apparatus. This information shall be given in a language acceptable to the country where the apparatus is intended to be used. The important safety instructions shall be entitled Important Safety Instructions. The following safety instructions shall be included where applicable, and, when used, shall be verbatim as follows. Additional safety information may be included by adding statements after the end of the following safety instruction list. At the manufacturer s option, a picture or drawing that illustrates the intent of a specific safety instruction may be placed immediately adjacent to that safety instruction: Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. 6 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Clean only with dry cloth. 7 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Do not block any ventilation openings. Install in accordance with the manufacturer s instructions. 4 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)that produce heat. 8 Only use attachments/accessories specified by the manufacturer. 5 When mounting a TV it on the wall, make sure not to install TV by hanging power and signal cables on the back of the TV. 9 Unplug this apparatus when unused for long periods of time.

0 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Never touch this apparatus or antenna during a thunder or lighting storm. Do not allow a impact shock or any objects to fall into the product, and do not drop onto the screen with something. 5 Outdoor use marking : WARNING - To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has exposed to rain or moisture, does not operate normally, or has been dropped. 6 Wet Location Marking : Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on or over apparatus. 4 CAUTION concerning the Power Cord : Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use 7 8 GROUNDING Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. Short-circuit Breaker Power Supply DISCONNECTING DEVICE FROM MAINS Mains plug is the disconnecting device. The plug must remain readily operable.

CONTENTS WARNING / CAUTION............................ SAFETY INSTRUCTIONS.......................... FEATURE OF THIS TV............................... 6 Accessories...................................................... 7 Front Panel Information..................................... 8 Back Panel Information.................................... 0 Stand Installation............................................ 4 Back Cover for Wire Arrangement..................... 6 Desktop Pedestal Installation............................ 8 VESA Wall Mounting........................................ 8 Swivel Stand.................................................... 9 Not Using the Desk-Type Stand........................ 9 Attaching the TV to a Desk.............................. 9 How to join the TV Assemble to the wall to protect the TV tumbling.............................................. 0 Antenna or Cable Connection.......................... EXTERNAL EQUIPMENT SETUP HD Receiver Setup......................................... DVD Setup..................................................... 5 VCR Setup..................................................... 7 Other A/V Source Setup................................. 9 PC Setup........................................................ 0 USB In Setup................................................. 8 Audio Out Setup............................................ 9 WATCHING TV / CHANNEL CONTROL Remote Control Functions............................... 40 Turning On TV................................................ 4 Channel Selection........................................... 4 Volume Adjustment......................................... 4 Quick Menu.................................................... 4 Installation Guide............................................ 44 On-Screen Menus Selection............................ 46 Channel Setup - Auto Scan (Auto Tuning)........................... 48 - Add / Delete Channel (Manual Tuning)...... 49 - Channel Editing........................................ 50 Input List........................................................ 5 Input Label..................................................... 5 AV Mode........................................................5 SimpLink......................................................... 54 USB Entry Modes................................................... 56 Photo List....................................................... 57 Music List....................................................... 6 PICTURE CONTROL Picture Size (Aspect Ratio) Control.................. 64 Preset Picture Settings - Picture Mode - Preset............................... 66 - Color Tone - Preset................................... 67 Manual Picture Adjustment - Picture Mode - User Mode........................ 68 - Color Tone - User Mode........................... 69 Picture Improvement Technology..................... 70 Advanced - Black (Darkness) Level................... 7 Advanced - Eye Care....................................... 7 Advanced - Film Mode..................................... 7 Advanced - TruMotion..................................... 74 TruMotion Demo............................................. 75 Picture Reset..................................................76 Power Indicator.............................................. 77 Image Sticking Minimization (ISM) Method....... 78 Power Saving Picture Mode.............................. 76 4

SOUND & LANGUAGE CONTROL Auto Volume Leveller (Auto Volume)................ 80 Preset Sound Setting (Sound Mode)................ 8 Sound Setting Adjustment - User Mode........... 8 Clear Voice..................................................... 8 Balance..........................................................84 TV Speakers On/Off Setup.............................. 85 Audio Reset................................................... 86 Stereo/SAP Broadcasts Setup.......................... 87 Audio Language.............................................. 88 On-Screen Menus Language Selection............. 89 Caption Mode - Analog Broadcasting System Captions....... 90 - Digital Broadcasting System Captions........ 9 - Caption Option....................................... 9 APPENDIX Troubleshooting............................................. 0 Maintenance.................................................. Product Specifications.................................... Programming the Remote Control.................. 6 IR Codes......................................................9 External Control Through RS-C................. TIME SETTING Clock Setting - Auto Clock Setup.................................... 9 - Manual Clock Setup................................. 94 Auto On/Off Timer Setting............................. 95 Sleep Timer Setting......................................... 96 Auto Shut-off Setting....................................... 97 PARENTAL CONTROL / RATINGS Set Password & Lock System........................... 98 Channel Blocking........................................... 0 Movie & TV Rating........................................ 0 Downloadable Rating..................................... 07 External Input Blocking.................................. 08 Key lock........................................................ 09 5

FEATURE OF THIS TV is a trademark of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc. Manufactured under license from Dolby Laboratories. Dolby and the double-d symbol are trademarks of Dolby Laboratories. LG TV with this logo can play MP music from a MP player, such as ipod, and JPEG images from a digital camera through the USB device. With HDMI CEC support of LG s audio/video device connected to the HDMI (high-definition multimedia interface), LG TV with this logo works easily with one remote control. It has three HDMI ports that connect audio and video devices with one cable and produces the highest quality digital images and sound. High-definition television. High-resolution digital television broadcast and playback system composed of roughly a million or more pixels, 6:9 aspect-ratio screens, and AC digital audio. A subset of digital television, HDTV formats include 080i and 70p resolutions. LG's own special digital image generator, consisting of a full digital image processor, six different main picture quality factors. It has HDMI ports that connect audio and video devices with one cable and produces the highest quality digital images and sound. FOR LCD TV If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal, there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the monitor's performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen. On Disposal a. The fluorescent lamp used in this product contains a small amount of mercury. b. Do not dispose of this product with general household waste. c. Disposal of this product must be carried out in accordance to the regulations of your local authority. 6

Copyright 007 LGE, All Rights Reserved. 4 5 6 7 8 9 MUTE P A G E TV ACCESSORIES Ensure that the following accessories are included with your product. If an accessory is missing, please contact the dealer where you purchased the product. User must use shielded signal interface cables (D-sub 5 pin cable) with ferrite cores to maintain standard compliance for the product. The accessories can be different from the figures shown here. RETURN VOL CH FAV AV MODE STB Q. MENU MENU POWER DVD VCR INPUT 0 FLASHBK.5V.5V Owner s Manual CD Manual Remote Control, Power Cord 75ohm Round Cable Batteries or Protection Cover (Refer to P.9) (This accessories can be different from the figures shown here depending on your models.) Polishing Cloth (This feature is not available for all models.) * Slightly wipe stained spot on the exterior only with the polishing cloth for the product exterior if there is stain or fingerprint on surface of the exterior. * Do not wipe roughly when removing stain. Please be cautions of that excessive pressure may cause scratch or discoloration. For Plasma TV models Option Extras Cable Management Clip D-sub 5 pin Cable For LCD TV models x 4 x 4 Bolts for stand assembly (Refer to P.5) (Only 6//7/4LG0, 7/4LG50) Screw for stand fixing (Refer to P.9) (Only 6/LG0, LG50) 7-Bolts for stand assembly (Refer to P.5) Cable Management Clip (Only /7/4/47/5LG60) 7

FRONT PANEL INFORMATION Image shown may differ from your TV NOTE: If your product has a protection tape attached, remove the tape. And then wipe the product with a cloth (If a polishing cloth is included with your product, use it). Plasma TV Model Remote Control Sensor POWER Button Power/Standby Indicator Illuminates red in standby mode. Illuminates green when the set is switched on. INPUT MENU VOL CH INPUT Button MENU Button Button VOLUME (-, +) Buttons CHANNEL (E,D)Buttons 8

LCD TV Model 6//7/4/47/5LG0/50/70 CH CHANNEL (D,E) Buttons Intelligent Eye (Except **LG0) Adjusts picture according to the surrounding conditions VOL VOLUME (+, -) Buttons POWER Button Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the set is switched on. MENU INPUT Button MENU Button INPUT Button /7/4/47/5LG60 CH CHANNEL (D,E) Buttons Intelligent Eye Adjusts picture according to the surrounding conditions Remote Control Sensor Power/Standby Indicator Illuminates red in standby mode. Illuminates white when the TV is switched on. Note: You can adjust Power Indicator in the OPTION menu. VOL MENU INPUT VOLUME (+, -) Buttons Button MENU Button INPUT Button 9

BACK PANEL INFORMATION Image shown may differ from your TV Plasma TV Model VIDEO L/MONO AUDIO R HDMI IN 4 USB IN 0 9 AV IN HDMI/DVI IN RGB IN RGB(PC) AUDIO (RGB/DVI) 4 REMOTE CONTROL IN 5 ANTENNA/ CABLE IN DIGITAL AUDIO OUT OPTICAL COAXIAL 6 7 COMPONENT IN RS-C IN (CONTROL & SERVICE) AUDIO OUT 8 S-VIDEO VIDEO AUDIO VIDEO AUDIO ( MONO) AV IN 9 0

HDMI/DVI IN, HDMI IN Connect a HDMI signal to HDMI port. Or DVI (VIDEO) signal to the HDMI port with a DVI to HDMI cable. COMPONENT IN Connect a component video/audio device to these jacks. 0 USB INPUT Power Cord Socket For operation with AC power. Caution: Never attempt to operate the TV on DC power. RGB (PC) Connect the output from a PC. AUDIO (RGB/DVI) Connect the audio from a PC. 4 5 6 7 8 9 REMOTE CONTROL PORT Connect your wired remote control. RS-C IN (CONTROL & SERVICE) PORT Connect to the RS-C port on a PC. ANTENNA/CABLE IN Connect over-the air signals to this jack. Connect cable signals to this jack. DIGITAL AUDIO OUT Connect digital audio to various types of equipment. Note: In standby mode, these ports do not work. AUDIO OUT Connect analog audio to various types of equipment. AV (Audio/Video) IN Connect audio/video output from an external device to these jacks. S-VIDEO Connect S-Video out from an S-VIDEO device.

Image shown may differ from your TV LCD TV Model 6//7/4/47/5LG0/50 /7/4/47/5LG60 VIDEO L/MONO AUDIO R USB HDMI IN SERVUCE ONLY 0 9 AV IN 7/4/47/5LG50 RGB(PC) RGB IN 4 AUDIO REMOTE (RGB/DVI) CONTROL IN 5 DIGITAL AUDIO OUT OPTICAL COAXIAL ANTENNA/ CABLE IN 7 6 HDMI/DVI IN RS-C IN (CONTROL & SERVICE) AUDIO OUT 8 (DVI) VIDEO AUDIO COMPONENT IN S-VIDEO VIDEO ( MONO) AUDIO AV IN 9 6//7/4LG0 RGB(PC) RGB IN AUDIO (RGB/DVI) 4 REMOTE CONTROL IN 5 DIGITAL AUDIO OUT OPTICAL 7 ANTENNA/ CABLE IN 6 HDMI/DVI IN RS-C IN (CONTROL & SERVICE) AUDIO OUT 8 (DVI) VIDEO AUDIO COMPONENT IN S-VIDEO VIDEO ( MONO) AUDIO AV IN 9

/4/47/5LG70 VIDEO L/MONO AUDIO R USB HDMI IN 4 SERVUCE ONLY 0 9 AV IN HDMI/DVI IN RGB(PC) RGB IN 4 AUDIO REMOTE (RGB/DVI) CONTROL IN 5 DIGITAL AUDIO OUT OPTICAL COAXIAL ANTENNA/ CABLE IN 7 6 RS-C IN (CONTROL & SERVICE) AUDIO OUT 8 (DVI) VIDEO AUDIO COMPONENT IN S-VIDEO VIDEO ( MONO) AUDIO AV IN 9 4 5 HDMI/DVI IN, HDMI IN Connect a HDMI signal to HDMI port. Or DVI (VIDEO) signal to the HDMI port with a DVI to HDMI cable. COMPONENT IN Connect a component video/audio device to these jacks. RGB (PC) Connect the output from a PC. AUDIO (RGB/DVI) Connect the audio from a PC. REMOTE CONTROL PORT Connect your wired remote control. RS-C IN (CONTROL & SERVICE) PORT Connect to the RS-C port on a PC. 7 8 9 0 DIGITAL AUDIO OUT Connect digital audio to various types of equipment. Note: In standby mode, these ports do not work. AUDIO OUT Connect analog audio to various types of equipment. AV (Audio/Video) IN Connect audio/video output from an external device to these jacks. S-VIDEO Connect S-Video out from an S-VIDEO device. USB INPUT Power Cord Socket For operation with AC power. Caution: Never attempt to operate the TV on DC power. 6 ANTENNA/CABLE IN Connect over-the air signals to this jack. Connect cable signals to this jack.

STAND INSTALLATION Image shown may differ from your TV Plasma TV Model 4PG0/0 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.? Assemble the TV as shown. Fix the 4 bolts securely using the holes in the back of the TV 4

LCD TV Model Only 6//7/4LG0, 7/4LG50 /7/4/47/5LG60 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Assemble the parts of the STAND B ODY with COVER B ASE of the TV. Assemble the parts of the STAND B ODY with COVER B ASE of the TV. STAND B ODY STAND B ODY COVER B ASE COVER B ASE Assemble the TV as shown. 4 Fix the 4 bolts securely using the holes in the back of the TV 4 Assemble the TV as shown. Fix the 4 bolts securely using the holes in the back of the TV 5

BACK COVER FOR WIRE ARRANGEMENT Image shown may differ from your TV. Plasma TV Model 50/60PG60F Connect the cables as necessary. To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section. 4/50PG0/0 Arrange the cables as shown. Install the CABLE MANAGEMENT CLIP as shown and manage the cable. CABLE MANAGEMENT CLIP How to remove the CABLE MANAGEMENT CLIP G Hold the CABLE MANAGEMENT CLIP with both hands and pull it backward. Separate CABLE MANAGEMENT CLIP from TV by pressing two latches. 6! NOTE G Do not hold the CABLE MANAGEMENT CLIP when moving the TV. - If the TV is dropped, you may be injured or the product may be broken.

LCD TV Model 6//7/4/47/5LG0/50/70 Connect the cables as necessary. To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section. /7/4/47/5LG60 Connect the cables as necessary. To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section of the manual. Install the CABLE MANAGEMENT CLIP as shown and manage the cable. Bundle the cables together using the supplied CABLE MANAGEMENT CLIP. CABLE MANAGEMENT CLIP Fit the CABLE MANAGEMENT CLIP as shown. 7

DESKTOP PEDESTAL INSTALLATION Image shown may differ from your TV. For proper ventilation, allow a clearance of 4 inches on all four sides from the wall. 4 inches 4 inches 4 inches 4 inches VESA WALL MOUNTING This product accepts a VESA-compliant mounting interface pad. (optional) There 4 threaded holes are available for attaching the bracket. Plasma TV Model 600 mm 400 mm LCD TV Model 00 mm (Only 5 inches: 800 mm) 600 mm 00 mm (Only 5 inches: 400 mm) 400 mm! NOTE G Screw length needed depends on the wall mount used. For further information, refer to the VESA Wall Mounting Instruction Guide. 8

SWIVEL STAND After installing the TV, you can adjust the TV set manually to the left or right direction by 0 degrees to suit your viewing position. NOT USING THE DESK-TYPE STAND When installing the wall-mounted unit, use the protection cover for desk-type stand installation. ATTACHING THE TV TO A DESK (Only 6/LG0, LG50)? Stand -Screw (provided as parts of the product) Desk The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. WARNING G This apparatus must be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury/death. 9

PLEASE SET IT UP CAREFULLY SO THE PRODUCT DOESN T FALL OVER. You should purchase necessary components to prevent TV from falling off of the stand. Image shown may differ from your TV. We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product. Caution: Please make sure that children don t climb on or hang from the TV. Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture. *If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts. * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes. Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) to the wall. Match the height of the bracket that is mounted on the wall to the holes in the product. Ensure the eye-bolts or brackets are tightened securely. Use a sturdy rope (not provided as parts of the product, must purchase separately) to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product.! NOTE G When moving the TV, undo the cords first. G Use a platform or cabinet strong and large enough to support the size and weight of the TV G To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same. 0

ANTENNA OR CABLE CONNECTION Image shown may differ from your TV.. Antenna (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust antenna direction if needed. Wall Antenna Socket Multi-family Dwellings/Apartments (Connect to wall antenna socket) ANTENNA/ CABLE IN Outdoor Antenna (VHF, UHF) RF Coaxial Wire (75 ohm) Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna) Copper Wire Be careful not to bend the bronze wire when connecting the antenna.. Cable Cable TV Wall Jack RF Coaxial Wire (75 ohm) ANTENNA/ CABLE IN Antenna UHF VHF Signal Amplifier ANTENNA/ CABLE IN To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly. If the antenna needs to be split for two TV s, install a -Way Signal Splitter. If the antenna is not installed properly, contact your dealer for assistance.! NOTE G The TV will let you know when the analog, cable, and digital channel scans are complete.

EXTERNAL EQUIPMENT SETUP To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. This part of EXTERNAL EQUIPMENT SETUP mainly use picture for 7/4/47/5LG50 models. HD RECEIVER SETUP This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. When connecting Component cable EXTERNAL EQUIPMENT SETUP. How to connect. How to use Connect the video outputs (Y, PB, PR) of the digital set top box to the COMPONENT IN VIDEO jacks on the set. Match the jack colors (Y = green, PB = blue, and PR = red). Connect the audio output of the digital set-top box to the COMPONENT IN AUDIO jacks on the set. Y PB PR L R RGB(PC) RGB IN AUDIO REMOTE (RGB/DVI) CONTROL IN D Turn on the digital set-top box. (Refer to the owner s manual for the digital set-top box. operation) Select Component input source by using the INPUT button on the remote control. If connected to COMPONENT IN input, select Component input source. I/DVI IN Y PB PR L R VIDEO AUDIO COMPONENT IN RS (CONTR S-V Signal 480i 480p 70p 080i 080p Component Yes Yes Yes Yes Yes HDMI No Yes Yes Yes Yes Y, CB/PB, CR/PR Resolution 70x480i 70x480p 80x70p Horizontal Frequency(KHz) Vertical Frequency(Hz) 5.7 59.94 5.7 60.00.47 59.94.50 60.00 44.96 59.94 45.00 60.00 90x080i.7 59.94.75 60.00 90x080p 6.97.976 7.00 4.00.7 9.97.75 0.00 67.4 59.94 67.50 60.00

When connecting HDMI cable. How to connect. How to use Connect the digital set-top box to HDMI/DVI IN,, or 4 jack on the set. No separated audio connection is necessary. HDMI supports both audio and video. Turn on the digital set-top box. (Refer to the owner s manual for the digital set-top box.) Select HDMI, HDMI, HDMI, or HDMI4 input source with using the INPUT button on the remote control. HDMI/DVI IN (DVI) RGB(PC) RGB IN Y PB PR A (RG VIDEO COMPONENT EXTERNAL EQUIPMENT SETUP HDMI-DTV OUTPUT HDMI-DTV Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 70x480p 80x70p 90x080i 90x080p.47 59.94.50 60.00 44.96 59.94 45.00 60.00.7 59.94.75 60.00 6.97.976 7.00 4.00.7 9.97.75 0.00 67.4 59.99 67.50 60.00

EXTERNAL EQUIPMENT SETUP When connecting HDMI to DVI cable ANTENNA/ CABLE IN EXTERNAL EQUIPMENT SETUP HDMI/DVI IN (DVI) RGB(PC) RGB IN AUDIO REMOTE (RGB/DVI) CONTROL IN Y PB PR L R VIDEO AUDIO COMPONENT IN DIGITAL AUDIO OUT OPTICAL RS-C IN (CONTROL & SERVICE) COAXIAL AUDIO OUT S-VIDEO VIDEO L(MONO) AUDIO R AV IN DVI-DTV OUTPUT L R. How to connect Connect the DVI output of the digital set-top box to the HDMI/DVI IN(DVI) jack on the set. Connect the audio output of the digital set-top box to the AUDIO (RGB/DVI) jack on the set.. How to use Turn on the digital set-top box. (Refer to the owner s manual for the digital set-top box.) Select HDMI input source with using the INPUT button on the remote control. 4

DVD SETUP When connecting Component cable. How to connect. How to use Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT IN VIDEO jacks on the set. Match the jack colors (Y = green, PB = blue, and PR = red). Connect the audio outputs of the DVD to the COMPONENT IN AUDIO jacks on the set. Turn on the DVD player, insert a DVD. Select Component input source by using the INPUT button on the remote control. If connected to COMPONENT IN input, select Component input source. Refer to the DVD player's manual for operating instructions. VI IN Y PB PR L R RGB(PC) RGB IN AUDIO REMOTE (RGB/DVI) CONTROL IN Y PB PR L R VIDEO AUDIO COMPONENT IN D RS- (CONTRO S-V O EXTERNAL EQUIPMENT SETUP Component Input ports To get better picture quality, connect a DVD player to the component input ports as shown below. Component ports on the TV Y PB PR Y PB PR Video output ports on DVD player Y Y B-Y Cb R-Y Cr Y Pb Pr 5

EXTERNAL EQUIPMENT SETUP When connecting with an S-Video cable. How to connect S-VIDEO AUDIO L R EXTERNAL EQUIPMENT SETUP. How to use Connect the S-VIDEO output of the DVD to the S -VIDEO input on the set. Connect the audio outputs of the DVD to the AUDIO input jacks on the set. Turn on the DVD player, insert a DVD. Select AV input source by using the INPUT button on the remote control. Refer to the DVD player's manual for operating instructions. UDIO REMOTE B/DVI) CONTROL IN L R DIGITAL AUDIO OUT OPTICAL RS-C IN (CONTROL & SERVICE) COAXIAL AUDIO OUT ANTENNA/ CABLE IN AUDIO N S-VIDEO VIDEO L(MONO) AUDIO R AV IN When connecting HDMI cable. How to connect HDMI/DVI IN RGB(PC) U O (RGB/D Connect the HDMI output of the DVD to the HDMI/DVI IN,, or 4 jack on the set. No separated audio connection is necessary. HDMI supports both audio and video. (DVI) Y PB PR L VIDEO A COMPONENT IN. How to use Select HDMI, HDMI, HDMI, or HDMI4 input source by using the INPUT button on the remote control. Refer to the DVD player's manual for operating instructions. HDMI-DVD OUTPUT 6

VCR SETUP To avoid picture noise (interference), leave an adequate distance between the VCR and TV. Use the ISM feature in the Option menu to avoid having a fixed image remain on the screen for a long period of time (Only Plasma TV model). If the 4: picture format is used; the fixed images on the sides of the screen may remain visible on the screen. This phenomenon is common to all manufactures and in consequence the manufactures warranty does not cover the product bearing this phenomenon. When connecting with an antenna AUDIO REMOTE (RGB/DVI) CONTROL IN DIGITAL AUDIO OUT OPTICAL RS-C IN (CONTROL & SERVICE) COAXIAL AUDIO OUT ANTENNA/ CABLE IN ANT OUT ANT IN S-VIDEO OUTPUT SWITCH VIDEO L R EXTERNAL EQUIPMENT SETUP PR L AUDIO NENT IN R S-VIDEO VIDEO L(MONO) AUDIO R AV IN Wall Jack Antenna. How to connect Connect the RF antenna out socket of the VCR to the ANTENNA/CABLE IN socket on the set. Connect the antenna cable to the RF antenna in socket of the VCR.. How to use Set VCR output switch to or 4 and then tune TV to the same channel number. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner s manual.) 7

EXTERNAL EQUIPMENT SETUP When connecting with a RCA cable ANT IN S-VIDEO VIDEO L R. How to connect Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) ANT OUT OUTPUT SWITCH ANTENNA/ CABLE IN EXTERNAL EQUIPMENT SETUP. How to use Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner s manual.) Select AV input source by using the INPUT button on the remote control. If connected to AV IN, select AV input source.! NOTE UDIO REMOTE B/DVI) CONTROL IN AUDIO N RS-C IN (CONTROL & SERVICE) G If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the set. L R DIGITAL AUDIO OUT OPTICAL COAXIAL AUDIO OUT S-VIDEO VIDEO L(MONO) AUDIO R AV IN When connecting with an S-Video cable ANT IN S-VIDEO VIDEO L R. How to connect Connect the S-VIDEO output of the VCR to the S -VIDEO input on the set. ANT OUT OUTPUT SWITCH. How to use Connect the audio outputs of the VCR to the AUDIO input jacks on the set. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner s manual.) Select AV input source by using the INPUT button on the remote control. AUDIO REMOTE (RGB/DVI) CONTROL IN L AUDIO NT IN R DIGITAL AUDIO OUT OPTICAL RS-C IN (CONTROL & SERVICE) S-VIDEO COAXIAL AUDIO OUT VIDEO L(MONO) AUDIO R ANTENNA/ CABLE IN AV IN 8! NOTE G The picture quality is improved: compared to normal composite (RCA cable) input. CAUTION G Do not connect to both Video and S-Video at the same time. In the event that you connect both Video and the S-Video cables, only the S-Video will work.

OTHER A/V SOURCE SETUP. How to connect Camcorder Video Game Set. How to use Connect the AUDIO/VIDEO jacks between TV and external equipment. Match the jack colors. (Video = yellow, Audio Left = white, and Audio Right = red) Select AV input source by using the INPUT button on the remote control. If connected to AV IN input, select AV input source. Operate the corresponding external equipment. VIDEO L/MONO AUDIO R USB HDMI IN SERVUCE ONLY VIDEO L R EXTERNAL EQUIPMENT SETUP AV IN 9

EXTERNAL EQUIPMENT SETUP PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. When connecting D-sub 5 pin cable EXTERNAL EQUIPMENT SETUP. How to connect Connect the RGB output of the PC to the RGB (P C) jack on the set. Connect the PC audio output to the AUDIO (RGB/DVI) jack on the set. MI/DVI IN RGB(PC) RGB IN AUDIO REMOTE (RGB/DVI) CONTROL IN Y PB PR L R VIDEO AUDIO COMPONENT IN (CO. How to use Turn on the PC and the TV. Select RGB-PC input source by using the INPUT button on the remote control. RGB OUTPUT AUDIO 0

When connecting HDMI to DVI cable CABLE IN HDMI/DVI IN (DVI) AUDIO REMOTE (RGB/DVI) CONTROL IN Y PB PR L R RGB(PC) RGB IN VIDEO AUDIO COMPONENT IN DIGITAL AUDIO OUT OPTICAL RS-C IN (CONTROL & SERVICE) COAXIAL AUDIO OUT S-VIDEO VIDEO L(MONO) AUDIO R AV IN EXTERNAL EQUIPMENT SETUP DVI-PC OUTPUT AUDIO. How to connect Connect the DVI output of the PC to the HDMI/DVI IN(DVI) jack on the set. Connect the PC audio output to the AUDIO (RGB/DVI) jack on the set.. How to use Turn on the PC and the TV. Select HDMI input source with using the INPUT button on the remote control.

EXTERNAL EQUIPMENT SETUP! NOTES EXTERNAL EQUIPMENT SETUP G For LCD TV: To get the the best picture quality, adjust the PC graphics card to 66x768. G For Plasma TV: To get the the best picture quality, adjust the PC graphics card to 60x768. G Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. G Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC mode. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card. G Avoid keeping a fixed image on the screen for a long period of time. The fixed image may become permanently imprinted on the screen. G The synchronization input form for Horizontal and Vertical frequencies is separate. Supported Display Specifications For 6//7/4LG0, 4/50PG0, 4/50PG0 RGB-PC, HDMI-PC Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 640x50 70x400 640x480 800x600 04x768 80x768 60x768 66x768.469 70.08.469 70.08.469 59.94 7.879 60. 48.6 60.00 47.776 59.87 47.70 59.799 47.0 59.65 * Only RGB-PC mode * Only LCD TV

Supported Display Specifications For 7/4/47/5LG50, /7/4/47/5LG60 /4/47/5LG70, 50/60PG60F RGB-PC, HDMI-PC Resolution 640x50 70x400 640x480 800x600 Horizontal Frequency(KHz) Vertical Frequency(Hz).468 70.09.469 70.08.469 59.94 7.500 75.00 7.86 7.80 5.56 56.5 7.879 60. 46.875 75.00 48.077 7.8 EXTERNAL EQUIPMENT SETUP 04x768 80x768 80x04 60x768 600x00 90x080 48.6 60.00 56.476 70.06 60.0 75.0 47.776 59.87 60.89 74.89 6.98 60.0 79.976 75.05 47.7 60.05 75.00 60.00 66.587 59.94 * RGB-PC mode only! NOTE G Depending on graphic card and signal status, there can be some shaking to find best picture in a little time.

EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode Selecting Resolution EXTERNAL EQUIPMENT SETUP When you change the resolution, select the proper resolution in present input to see the best picture appearance. XGA (04, 80, 60) isn t distinguished because of having the same H/V Sync Time. This function is you to select the Default Sync Time. This feature operates only in RGB-PC mode. PICTURE Move Advanced Control Picture Reset Screen TruMotion Demo E Enter SCREEN Move MENU Prev. Resolution Auto Config. Position Size G 04 x 768 80 x 768 60 x 768 Phase Reset MENU Select PICTURE. Select SCREEN. Select Resolution. 4 Select the desired resolution. 5 MENU Return to the previous menu. 4

Auto Configure Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment. Auto configure This function is for automatic adjustment of the screen position, clock, and phase The displayed image will be unstable for a few seconds while the auto configuration is in progress. PICTURE Move Advanced Control Picture Reset Screen TruMotion Demo E Enter SCREEN Move MENU Prev. Resolution Auto Config. G Position Size Auto config. EXTERNAL EQUIPMENT SETUP Phase Reset MENU 4 Select PICTURE. Select SCREEN. Select Auto Config.. Select Yes. If the position of the image is still not correct, try Auto adjustment again. If picture needs to be adjusted again after Auto adjustment in RGB-PC, you can adjust the Position, Size or Phase. 5 Start Auto Configuration. 5

Adjustment for screen Position, Size, and Phase If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This feature operates only in RGB-PC mode. PICTURE Screen TruMotion Demo E Move Advanced Control Picture Reset Enter SCREEN Move MENU Prev. Resolution Auto Config. Position Size G F D E G Phase Reset MENU 4 Select PICTURE. Select SCREEN. Select Position, Size, or Phase. Make appropriate adjustments. Position: This function is to adjust picture to left/right and up/down as you prefer. Size: This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen size will also change. The Size adjustment range is -0 ~ +0. Phase: This function allows you to remove any horizontal noise and clear or sharpen the image of characters. The Phase adjustment range is -6 ~ +6. 6

Screen Reset (Reset to original factory values) Returns to the default settings Resolution, Auto Config., Position, Size and Phase at the factory. PICTURE Screen TruMotion Demo E Move Advanced Control Picture Reset Enter SCREEN Move MENU Prev. Resolution Auto Config. Position Size Initialize Settings. Phase Reset G MENU Select PICTURE. Select SCREEN. Select Reset. 4 Select Yes. 5 7

EXTERNAL EQUIPMENT SETUP USB IN SETUP EXTERNAL EQUIPMENT SETUP VIDEO L/MONO AUDIO R USB HDMI IN SERVUCE ONLY AV IN. How to connect or Connect the USB device to the USB SERVICE ONLY jack on the side of TV.. How to use After connecting the USB jack, you use the USB function. ( G p.56) 8

AUDIO OUT SETUP Send the TV s audio to external audio equipment via the Audio Output port. Analog. How to connect Digital Connect audio outputs to the TV s AUDIO OUT jacks. Set the TV Speaker option - Off in the AUDIO menu. (G p.85). See the external audio equipment instruction manual for operation.. How to connect O VI) UDIO REMOTE CONTROL IN R DIGITAL AUDIO OUT OPTICAL RS-C IN (CONTROL & SERVICE) COAXIAL AUDIO OUT CABLE IN S-VIDEO VIDEO L(MONO) AUDIO R L R AUDIO AV IN EXTERNAL EQUIPMENT SETUP Connect one end of the optical or coaxial cable to the TV s OPTICAL or COAXIAL (Except **LG0) port of DIGITAL AUDIO OUT. Connect the other end of the optical or coaxial cable to the digital audio input on the audio equipment. ANTENNA/ CABLE IN Set the TV Speaker option - Off in the AUDIO menu. ( G p.85). See the external audio equipment instruction manual for operation. AUDIO REMOTE (RGB/DVI) CONTROL IN DIGITAL AUDIO OUT OPTICAL RS-C IN (CONTROL & SERVICE) COAXIAL AUDIO OUT! NOTE G When connecting with external audio equipments, such as amplifiers or speakers, please turn the TV speakers off. (G p.85) L R AUDIO NT IN S-VIDEO VIDEO L(MONO) AUDIO R AV IN CAUTION G Do not look into the optical output port. Looking at the laser beam may damage your vision. G Block the SPDIF out (optical/coaxial) about the contents with ACP(Audio Copy Protection) function. 9

WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. TV/STB/DVD/VCR Select the remote operating mode: TV, STB, DVD, or VCR. * If the mode of another product is selected, a button on the remote control which is not used for the selected product can control the TV. TV POWER STB Q. MENU MENU DVD VCR INPUT WATCHING TV / CHANNEL CONTROL POWER Q.MENU MENU INPUT VOLUME UP /DOWN FAV MUTE CHANNEL UP/DOWN PAGE UP/DOWN NUMBER button (DASH) BACK Turns your TV or any other programmed equipment on or off, depending on the mode. Select the desired quick menu source. G p.4 Displays the main menu. External input modes rotate in regular sequence Increase/decrease the sound level. Scroll through the programmed Favorite channels. G p.4 Switch the sound on or off. G p.4 Select available channels. Move from one full set of screen information to the next one. Used to enter a program number for multiple program channels such as -, -, etc. Tune to the last channel viewed. RETURN VOL FAV MUTE AV MODE CH 4 5 6 7 8 0 9 FLASHBK P A G E VCR/DVD buttons Control video cassette recorders or DVD players. Control USB menu (PHOTO LIST and MUSIC LIST.) Control the SIMPLINK compatible devices. 40

THUMBSTICK (Up/Down/Left Right/) RETURN Navigate the on-screen menus and adjust the system settings to your preference. Clear all on-screen displays and return to TV viewing from any menu. SIMPLINK AV MODE See a list of AV devices connected to TV. When you toggle this button, the SimpLink menu appears at the screen. G p.54-55 It helps you select and set images and sounds when connecting AV devices. G p.5 WATCHING TV / CHANNEL CONTROL Installing Batteries Open the battery compartment cover on the back side and install the batteries matching correct polarity (+with +,-with -). Install two.5v AAA batteries. Don t mix old or used batteries with new ones. Close cover. 4

WATCHING TV / CHANNEL CONTROL TURNING ON TV First, connect power cord correctly. At this moment, the TV switches to standby mode. In standby mode to turn TV on, press the, INPUT, CH (D or E) button on the TV or press the POWER, INPUT, CH( ), Number (0~9) button on the remote control. WATCHING TV / CHANNEL CONTROL! Select the viewing source by using the INPUT button on the remote control. This TV is programmed to remember which power state it was last set to, even if the power cord is out. When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode. NOTE G If you intend to be away on vacation, disconnect the power plug from the wall power outlet. CHANNEL SELECTION Press the CH ( ) or NUMBER buttons to select a channel number. VOLUME ADJUSTMENT Adjust the volume to suit your personal preference. Press the VOL (+ or -) button to adjust the volume. If you want to switch the sound off, press the MUTE button. You can cancel the Mute function by pressing the MUTE or VOL (+ or -) button. 4

QUICK MENU Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. Aspect Ratio: Selects your desired picture format. Power Saving (Only Plasma TV): Adjusts screen brightness to reduce the power consumption of the TV. Brightness (Only LCD TV): Adjusts screen brightness. Clear Voice: By differentiating the human sound range from others, it helps users listen to human voices better. Picture Mode: Selects the factory preset picture depend on the viewing environment. Sound Mode: Selects the factory preset sound for type of program. Plasma TV Q-Menu CH Aspect Ratio Power Saving Clear Voice Picture Mode Sound Mode Caption Multi Audio Sleep Timer Del/Add/Fav USB Eject F 6:9 G Off Vivid Standard Off English Off Add Eject Caption: Select a closed caption. Multi Audio: Selects MTS sound or changes the audio language. Sleep Time: Select the amount of time before your TV turns off automatically. Del/Add/Fav: Select channel you want to add or delete or add the channel to the Favorite List. USB Eject: Select USB Eject in order to eject USB device. LCD TV Q-Menu CH Aspect Ratio Brightness Clear Voice Picture Mode Sound Mode Caption Multi Audio Sleep Timer Del/Add/Fav USB Eject F 6:9 G Off Vivid Standard Off English Off Add Eject WATCHING TV / CHANNEL CONTROL Close Close Only for 50/60PG60F Only for /7/4/47/5LG50/60/70 Q. MENU Display each menu. Make appropriate adjustments. Q. MENU Return to TV viewing 4

WATCHING TV /CHANNEL CONTROL INITIAL SETTING This OSD (On Screen Display) is displayed automatically on the screen as figure after turning on the TV and you can adjust the Location, Time, Language, Auto tuning. WATCHING TV / CHANNEL CONTROL Step. Mode setting Step. Mode Setting It sets a use environment. Select the set where mode. Display Mode Enter Home Mode RETURN Exit Select Display Mode or Home Mode. Display Mode: It maintains the Picture mode optimized for the shop environment. It maintains the picture mode as Vivid at a specific interval. It s not available to use Low Power. Home Mode: You can adjust the picture mode to use. Step. Time setting Step. Time Setting Current Time Setting F Auto G Year 007 Month Date 5 Hour 5 PM Minute 5 Time Zone Eastern Daylight Saving Off Select Auto or Manual. Select desired time option. Enter RETURN Exit 44

Step. Option setting Step. Option Setting. OSD Language Setting F English G. Audio Language Setting French Step4. Auto Tuning Step4. Auto Tuning Enter Auto Tuning can change channel map. Do you want to start Auto Tuning? RETURN Exit Select OSD Language Setting or Audio Language Setting. Select your desired language. Start Auto Tuning. WATCHING TV / CHANNEL CONTROL Enter Enter RETURN Exit! NOTE You can also adjust Initial Setting in the OPTION menu. OPTION E Move Enter MENU Select OPTION. Initial Setting Select Initial Setting. 45

WATCHING TV /CHANNEL CONTROL ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. * Only /7/4/47/5LG50/60/70, 50/60PG60F CHANNEL Move Enter PICTURE Move Enter AUDIO Move Enter WATCHING TV / CHANNEL CONTROL Auto Tuning Manual Tuning Channel Edit OPTION Move Enter Language : English Input Label SIMPLINK : On Key Lock : Off Caption : Off ISM Method Power Saving : Level 0 Set ID : E Aspect Ratio : 6:9 Picture Mode : Standard Backlight 50 Contrast 50 Brightness 50 Sharpness 50 Color 50 Tint 0 R E CHANNEL PICTURE AUDIO OPTION LOCK INPUT G TIME USB Auto Volume : Off Clear Voice : On Balance 0 Sound Mode : Standard L R SRS TruSurround XT: Off Treble 50 Bass 50 Audio Reset E TIME Move Enter Clock : Nov, 007, 0:0 AM Off Time : Off On Time : Off Sleep Time : Off Auto Sleep : Off LOCK Move Enter INPUT Move Enter USB Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Downloadable Rating Input Block Antenna Cable AV AV Component Component RGB-PC HDMI E PHOTO LIST MUSIC LIST For USA For Canada MENU 4 MENU Display each menu. Select a menu item. Enter to the pop up menu. Return to TV viewing! NOTE G ISM Method, Power Saving: Only Plasma TV. G Backlight: Only LCD TV. G TruMotion Demo: Only /7/4/47/5LG60/70. G Power Indicator: Only /7/4/47/5LG60. 46

Only 6//7/4LG0, 4/50/PG0/0 CHANNEL Move Enter PICTURE Move Enter AUDIO Move Enter Auto Tuning Manual Tuning Channel Edit TIME Move Enter Clock : Nov, 007, 0:0 AM Off Time : Off On Time : Off Sleep Time : Off Auto Sleep : Off Aspect Ratio : 6:9 Picture Mode : Standard Backlight 50 Contrast 50 Brightness 50 Sharpness 50 Color 50 Tint 0 E CHANNEL PICTURE TIME OPTION R G AUDIO LOCK Auto Volume : Off Clear Voice : On Balance 0 Sound Mode : Standard L SRS TruSurround XT: Off Treble 50 Bass 50 Audio Reset E R WATCHING TV / CHANNEL CONTROL OPTION Move Enter LOCK Move Enter Language : English Input Label SIMPLINK : On Key Lock : Off Caption : Off ISM Method Power Saving : Level 0 Set ID : E Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Downloadable Rating Input Block For USA For Canada MENU Display each menu. Select a menu item. Enter to the pop up menu.! NOTE G ISM Method, Power Saving: Only Plasma TV. G Backlight: Only LCD TV. 4 MENU Return to TV viewing 47

WATCHING TV /CHANNEL CONTROL CHANNEL SETUP Auto Scan (Auto Tuning) Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run Auto Tuning again after any Antenna/Cable connection changes. WATCHING TV / CHANNEL CONTROL MENU CHANNEL Auto Tuning Manual Tuning Channel Edit Move Enter Select CHANNEL. Select Auto Tuning. Select Yes. CHANNEL Auto Tuning Manual Tuning Channel Edit Move Enter Press Yes button to begin auto tuning. Yes No A password is required to gain access to Auto Tuning menu if the Lock System is turned on. 4 Run Auto tuning. 5 RETURN Return to the previous menu. MENU Return to TV viewing 48

Add/Delete Channel (Manual Tuning) If selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the quality of the signal being received. CHANNEL Move Enter CHANNEL Move Enter MENU Auto Tuning Manual Tuning Channel Edit Select CHANNEL. Select Manual Tuning. Auto Tuning Manual Tuning Channel Edit F DTV G Select channel type and RF-channel number. Channel DTV -0 Delete Close Bad Normal Good WATCHING TV / CHANNEL CONTROL 4 5 Select DTV, T V, CADTV, or CATV. Select channel you want to add or delete. Select Add or Delete. A password is required to gain access to Manual Tuning menu if the Lock System is turned on. 6 RETURN Return to the previous menu. MENU Return to TV viewing 49

WATCHING TV / CHANNEL CONTROL CHANNEL SETUP Channel Editing WATCHING TV / CHANNEL CONTROL From the default channel list created from the Auto Tuning channel search, you can create two different types of channel lists in memory: custom list and favorite channel list. A custom list can be created by toggling each channel on or off with button. The channels in the Custom List are displayed in black and the channels deleted from the Custom List are displayed in gray. Once a channel is highlighted you can add or delete the channel by referring to the small window at the topleft corner of the screen. CHANNEL Auto Tuning Manual Tuning Channel Edit Move Enter MENU Previous CH Move Page Navigate Add/Delete RETURN Exit MENU Select CHANNEL. Select Channel Edit. 4 Select a channel. Select channel you want to add or delete. 5 MENU Return to the previous menu. RETURN Return to TV viewing 50