4G 20-45K 4G Fourth eneration
Tempest is the world s leading manufacturer of large format indoor projector enclosures for noise attenuation in presentation suites, digital cinema, live theatre and concert venues any noise-sensitive indoor space. models are projector-specific for projectors over 20,000 ANSI lumens, and have been tested and approved for each of the projectors covered, up to 45,000 ANSI lumens. uses a remote fan located in an adjacent space or insulated ceiling void to assure best-in-class noise attenuation. has a lightweight but extremely strong aluminum frame, with threaded (M12-1.75) holes at six points for easy installation. offers excellent projector access, with opening front and rear doors, and a projector slide that may be ordered for front or rear access on most models. Standard color: White (RAL 9003). Other colors to order. is equipped with Tempest s patented DEC4 Control, featuring a comprehensive display and remote monitoring options. may be configured for projector ceiling mounting (where permitted) or tabletop installation inside the enclosure. Portrait and Ultra-Short-Throw options are available to special order. Why so Quiet? There are several parts to the puzzle: First, enclosures are airtight boxes with excellent seals, which do much of the work. Second, we line enclosures with high performance melamine sound insulation foam rated incidentally to the highest fire safety standards. Third, we put the exhaust fan someplace else. As a rule of thumb, you need to blow through an enclosure about double the amount of air being 56.300 for Christie Boxer 30K. Tip: You can specify most models to slide front or back handled by the projector itself. That means fans, and fans mean noise. exhaust fans are located at the end of a duct, which may be in an insulated ceiling space, an adjoining room or an outside wall. The exhaust fan may also feed into the building air return, though we don t recommend feeding air to the enclosure inlets from the building air supply. It should be brought in at moderate temperature from a room or ceiling void. This combination achieves excellent attenuation in the audience space, which is our sole aim. Inlet air ideally sourced from adjoining space. If not feasible, lay a flexible padded duct hose in an S configuration over the ceiling tile. remote fan unit optionally feeding into building return air duct Exhaust Duct (by others Inlet Duct (by others) Inlet filter inside Enclosure Ceiling Adjoining Space Audience Space
6 Rigging points, top and bottom (M12-1.75 x 40mm stainless steel bolts supplied) Air inlet port with inlet filter (replace from inside) Air exhaust port Landscape Ultra-strong lightweight aluminum frame 56.200 for Panasonic PT-DZ21K Gas struts for smooth fingertip opening and closing Adjust projector position using projector feet, then clamp firmly in place Heavy duty projector tray slides tray may be mounted for tabletop or ceiling operation, and to slide out front or back Lockable latches front and back assure security and a perfect seal Tempered low-iron optical grade port glass for security and perfect imaging DEC4 TM User Interface, for customized setup and system monitoring. May be monitored remotely with optional comms card Oversized remote exhaust fan runs as slowly as possible consistent with keeping the projector at a safe operating temperature
Portrait Like all models, each portrait enclosure is customized for the intended projector, so we need to know the projector you re using when you order. Not all projectors may be used in portrait mode check with your projector manufacturer before ordering. Some projectors may be used in portrait mode but only in one orientation either base left or base right (picture here shows a Panasonic PT-DZ21K installed base left. Tilt mechanism allows +/- 7-10 projector tilt adjustment. The projector is attached by screws to the mounting plate that allow adjustment of tilt and roll using the projector feet before locking down. Ultra Short Throw UST enclosures allow you to paint the whole wall from just above or below. UST enclosures are wider than standard landscape enclosures, to allow for the extreme width of the projection beam without clipping. UST enclosures may be configured to mount above the image (projecting down) or below it (projecting up). The lenses may be fixed but the projector mount allows considerable adjustment of pan, tilt and roll. For the present, these UST enclosures are specially built for your project: Contact the factory and talk to us about your next UST adventure!
Fan Speed Control enclosures use powerful AC fans to evacuate the air in the enclosure, once every 1-2 seconds. To keep noise to a minimum, uses overdimensioned fans, that run slowly, providing a winning combination of high airflow volume with low noise. Individual Fan Monitoring G4 enclosures can also tell you how each fan in a whole installation is performing. DEC4 compares calculated and actual fan speed, and is able to alert you if one of the fans in a system needs attention. Combined with Tempest s upcoming remote monitoring service this means you could be receiving an alert on your smartphone one day telling you it s time to check the fan on enclosure two! G4 Fan Control System Monitoring 51.485 Comms Board Daisy-chain a group of enclosures together with this board one per enclosure. 51.ENB Comms Bridge 51.RMS Remote Monitoring Service We do the work for you! We monitor your installation 24/7 and send you email alerts if we spot anything out of the ordinary. Coming soon. Use this / adapter to connect one or a group of enclosures connected using to a PC or Tempest System Manager 51.TSM System Manager The Tempest System Manager monitors any Tempest G4 system, with any number of enclosures. System manager may be connected to a PC for local monitoring, and/or to the internet, for remote monitoring. LAN LAN Local PC Remote PC (Daisy Smartphone Chain) Local PC For more on DEC4 and remote monitoring, download the User Manual from www.tempest.biz
G4 Ordering Guide _ 5 6_. _. _. example: 56.300.L.IN Model # Format * L Landscape P Portrait U UST Electrical Standard US 208V, NEMA standard North America IN 230V, CE Standard International Model Description Dimensions (lwh) Weight Type * Shipping Dimensions/Weight 56.200 G4 200 50x34x22in 127x86x54cm 140lb/64kg Panasonic PT-DZ21K, PT-RZ12K Barco F90-W13 56.200.P G4 200P 50x24x38in 125x60x95cm 160lb/73kg Panasonic PT-DZ21K, PT-RZ12K Barco F90-W13, Portrait 56x40x30in/142x102x76cm 56x40x30in/142x102x76cm 308lb/140kg 352lb/160kg 56.202 G4 202 50x34x34in 127x86x866cm 190lb/86kg 2 x Panasonic PT-DZ21K 56x40x40in/142x102x102cm 418lb/190kg 56.210 G4 210 50x34x20in 127x86x51cm 140lb/64kg DPI Titan Quad 56x40x30in/142x102x76cm 308lb/140kg 56.220 G4 220 50x30x24in 127x76x61cm 160lb/73kg BARCO HDX 56x36x34in/142x92x87cm 352lb/160kg 56.230 G4.230 50x30x25in 127x76x70cm 170lb/77kg Christie CP2215/Solaria 1+ 56x36x38in/142x92x97cm 374lb/170kg 56.235 G4.235 54x34x23in 136x85x57cm 180lb/82kg DPI Insight Quad 60x40x36in/152x102x92cm 418lb/190kg 56.240 G4 240 54x34x26in 137x86x66cm 190lb/86kg Christie Roadster J-Series 60x40x36in/152x102x92cm 418lb/190kg 56.250 G4 250 52x47x27in 131x118x67cm 230lb/105kg Epson Pro L25000U 58x53x34in/147x135x86cm 506lb/230kg 56.300 G4 300 61x34x24in 153x86x61cm 175lb/80kg Christie Boxer 64x40x34in/163x102x87cm 386lb/175kg 56.310 G4 310 61x34x24in 153x86x61cm 175lb/80kg Barco UDX 64x40x34in/163x102x87cm 386lb/175kg 56.300.P G4 300P 61x29x37in 153x72x93cm 182lb/83kg Christie Boxer, portrait 64x40x34in/163x102x87cm 400lb/182kg 56.320 G4 320 70x38x27in 170x95x27cm 220lb/100kg Panasonic PT-RZ31K/RQ32K 76x44x34in/193x102x87cm 484lb/220kg 56.350 G4 350 54x36x30in 137x92x76cm 200lb/91kg BARCO FLM, HDF 60x42x40in/152x107x102cm 440lb/200kg 56.360 G4 360 54x36x30in 137x92x76cm 200lb/91kg BARCO HDFW30LP, Chiller 60x42x40in/152x107x102cm 440lb/200kg 56.400 G4 400 70x42x33in 178x107x84cm 240lb/109kg Christie Roadie 45K 76x48x43in/193x122x109cm 528lb/240kg 56.450 G4 450 70x38x36in 178x97x92cm 245lb/111kg Christie D4K35, CP2220/30 76x44x46in/193x112x117cm 539lb/245kg 56.45B Ballast Encl.** 31x24x26in 79x61x66cm 65lb/30kg Christie Ballast 37x30x32in/94x76x81cm 143lb/65kg 56.500 G4 500 70x38x36in 178x97x92cm 240lb/109kg BARCO HDQ *** 76x44x46in/193x112x117cm 528lb/240kg * For projectors not shown here, please contact factory we will be happy to accomodate any projector type ** Ballast Enclosure for certain Christie 30-45K projectors includes 6 /2m DC pigtails, so DC cables are not required *** Barco HDQ rigging Frame and Air Diffuser are not used in the enclosure. All Schedule B Export Code: 9405.99.0000 Custom Colors All the enclosures in this brochure are shown in our standard warm white semi-gloss finish. Black or any RAL color are available to special order. Options 56.UR.xxx Unistrut Rail Kit (Use the 3-digit enclosure model #, eg 56.UR.200 for 56.200) 56.IFL.11 Replacement Inlet Filter 56.200 Series 56.IFL.13 Replacement Inlet Filter 55.240 and up 51.485 Comms Board 51.ENB 51.TSM Comms Bridge Tempest G4 System Manager (coming soon) CAD drawings and user manuals at www.tempest.biz
Configurator Please complete this form and email to us at info@tempest.biz Name Custom Requests: Company Email Phone type Model Quantity 56. Destination Country Install Date Type Landscape Portrait Ultra Short Throw Slide Front Back Mount Feet Down Feet Up Unistrut Kit Yes, Qty No Bridge Yes, Qty No Comms Yes, Qty No Color Standard, Warm White Custom, RAL # Gloss Level % User manuals and CAD drawings at www.tempest.biz Made in the USA Tempest Lighting, Inc., September, 2017 In the interest of continuous product improvement, specifications are subject to change without notice Tempest Lighting, Inc., 11845 Wicks Street, Sun Valley, CA 91352, USA www.tempest.biz info@tempest.biz t: +1 818 787 8984 f: +1 818 252 7101