RF Series Panel remote RF EX1,EX1S,EX2,, S,,S 512 Mobile phone Direct connect WiFi gateway 512 RF to LED EX1 (Dimming) EX1S (Dimming) EX2 (CT) S S RF relay 0-10V Manual www.ltech-led.com Router connection Wired connection 0-10V LED RF to 0-10V Phase-cut Triac LED RF to phase-cut 1
Product features Installation instruction Adopt wireless RF and wired 512 protocol 2 in 1 control mode, more flexible and convenient for project installation. Advanced RF wireless sync/zone control technology, make sure dynamic color modes synchronously among multiple s. Install touch at different areas, can control the same LED light, achieve multi- control, no quantity limited. keys with chord and LED indicator. Adopts capacitive touch control technology makes LED dimming selection more user-friendly. Uninstall Compatible with remote and APP control. Technical specs Baseplate Base Typical base as below: Model EX1 EX1S EX2 S S Control type Input voltage Output signal Working temp. Dimming 100-240Vac RF 2.4GHz, 512-20 ~55 CT RGB RGBW Product size Unit: mm 25 European style 55 86 size Dimensions L86 W86 H36(mm) Package size L113 W112 H50(mm) 86 48 82 Weight(G.W.) 225g warranty 5 years RCM certification No.: RCMP17114 001 2 48 86 60 3
Terminals L N D D- GND Brightness shortcut keys Brightness touch slider Key functions 100-240Vac power input signal output Brightness touch slider EX1S Press: play CT touch slider EX1 EX2 4 5
Saturation slider White Key Press: on/off Long press: brightness slider s 2 scene-mode keys are corresponding with WiFi-106 gateway APP s 1 & 2 scene-mode key, the scenes can be changed by APP or. Mode S Speed color circle 1. 2. 3. 4. 5. 6. 7. 8. 9. Mode Static Red Static Green Static Blue Static Yellow Static Purple Static Cyan Static White RGB Jumping 7 Colors Jumping 10. RGB Color Smooth 11. Full-color Smooth s 2 scene-mode keys are corresponding with WiFi-106 gateway APP s 1 & 2 scene-mode key, the scenes can be changed by APP or. Mode Speed- Speed- Mode S Speed color circle White key Press: on/off Long press: brightness 1. Static Red 2. Static Green 3. Static Blue 4. Static Yellow 5. Static Purple 6. Static Cyan 7. Static White 8. RGB Jumping 9. 7 Colors Jumping 10. RGB Color Smooth 11. Full-color Smooth 12. Static Blue (only close RGB) White light only: press key to choose black mode, then press key for white light. 6 7
Match code sequence Application composition System Wiring System Wiring APP APP 512 control 1. 3. WiFi master controller Router Panel decoder Router Panel 2. 4. lamp WiFi master controller Gateway Gateway control * PS: No router needed when gateway works with phone directly. Match Code Sequence 1. Configure gateway with, which enables the smart phone to control devices via gateway. 2. Configure remote with, which enables remote to control devices. * PS: No router needed when gateway works with phone directly. Match Code Sequence 1. & gateway. 2. Panel & gateway. 3. &, remote & wireless. 1. 2. 4. 3. WiFi master controller WiFi master controller 8 9
wiring RF wireless wiring 11 Decoder Model: LT-858-5A Address=1 Decoder Model: LT-858-5A Address=1 Decoder Model: LT-858-5A Address=1 Decoder Model: LT-858-5A Address=1 10 Multiple wireless receivers (F4-3A/F4-5A/F4-CC/F4--5A/F5--4A) can be matched up with EX series touch within effective distance.
Multi- control wiring Match code between touch s (A) 1. Assuming that B matches 2. the slider on A with A, long press on B within 15s, when until all indicator lights in B indicator lights of B all zones flicker. stop flicking, match successfully. Match code between touch & remote A EX1/EX1S works with remote F1. EX2 works with remote F2. /S works with remote F3. /S works with remote F4. Long press on touch until all indicator lights flicker. * * (B) (C) After touch A realizes controlling the lamps, if B and C are matched up with A, they can also control the lamps. Linkage control is also available at connecting with decoders. EX1 (Dimming) EX1S ( Dimming) EX2 (CT) S S 2. Press any key on remote, indicator light of touch stop flicking, match successfully. F1 F2 F3 F4 (Dimming) (CT) Please match/clear code when status light of is white. 12 13
Match code between Panel & wireless s can work with wireless F4-3A/F4-5A/F4-CC./F4--5A/F5--4A. Match code between touch & gateway 1. Long press on touch until indicator lights flicker. Method 1: 1. Power off the 2. Long press On/Off 3. Power on the, 4. Short press any key. or color circle/slider, match successful. key of the until all indicator light flicking. the lamps flicker slowly, please complete step 4 within 15s. EX1 (Dimming) 2. EX1S ( Dimming) EX2 (CT) S Turn on APP, Click ZONE key to enter zone set interface, click the right top MATCH key, then operate following the prompt. S Method 2: Clear code 1. Short press ID learning 2. Long press On/Off key on 3. Short press any key or color button on EBOX-AD, the until all indicator circle/slider, match lamps flicker, please light flicker. successful. complete step 2 within 15s. ID learning button Press the bottom two key on touch simultaneously for 6s, the indicator lights flicker several times, clear code successfully. Please match/clear code when status light of is white. Please match/clear code when status light of is white. No further notice if any changes in the manual. Product function depends on the goods. Please feel free to contact our official distributor if any question. 14 www.ltech-led.com Update Time: 2019.01.24_A0 15