Ex td A21 IP66 T58 C. max. 3 x 4 mm 2 or 1 x 10 mm 2 with pin cable lug + 1 x 2.5 mm 2 fine wire. max. 4 x M20 metal thread

Similar documents
I Ex-protected connectors exlink I

8 Installation Equipment

3.3. Ex-Escape sign luminaires. Ex-Lite Metal version with LED technology for Zone 1 and Zone 21 / NEC applications

7 Lighting Technology

Pendant Light Fittings Series 6050

Pendant Light Fitting IEC Series 6470/2

9 Control Equipment. Measurement- and Control Equipment Series 8214, 8218

MID-EX-E. Figure: MID-EX-E*010* ka052000en; Rev. 2.3 J

EX-PROTECTED PORTABLE POWER SUPPLY UNITS

Operating instructions

Feed-through terminal, 4 mm², Screw connection, Wemid, dark beige, TS 35

Contactor 4 kw / 400 V with 3 Main Contacts and max. 4 Auxiliary Contacts Series 8510/122

Analog Input Module HART Ex i / I.S. Inputs, 8 Channels Type 9461/

TFR5 Room or outdoor temperature sensor. CombiTemp TM

M5 plug connector, 3-pin or hard-wire encapsulated cable. With. With connection cable. M5 plug connector. Active face LED

CAPACITIVE SENSORS KAS. Series 26. Level Control Food Industry Pharmaceutical Industry Semiconductor Industry Chemical Industry

JUMO extherm-at Type , explosion-proof surface-mounted thermostat for zones 1, 2, 21, and 22

Inductive sensor NI3-EG08K-Y1-H1341

Inductive sensor. 2-wire, analog output BI8-M18-LI-EXI

3/2-directional valve, electrically operated, Series AS3-SOV G 3/8 - G 1/2 pipe connection ATEX optional

Lighting: Fluorescent Lighting FD Series: Cylindrical Fluorescent Lighting Fixtures, Standard and Emergency Battery Back-Up Flameproof

Coils for solenoid valves

EXLUX ECOLUX C-LUX 6480 Series

PROPORTIONAL VALVES Sentronic plus

IECEx International Conference 2017 Shanghai, China. Electrical Installations Design, Selection, Erection and Inspection Part 2 of 2

Feed-through terminal, 2.5 mm², Screw connection, Wemid, dark beige, TS 35

KEL 183 Cable entry frames

DMP 335 DMP 335. Industrial Pressure Transmitter. Welded, Dry Stainless Steel Sensor. Pressure Transmitter. Industrial

DMP 335. Industrial Pressure Transmitter. Welded, Dry Stainless Steel Sensor. accuracy according to IEC 60770: 0.5 % FSO.

EXPlora. Introduction

EXLUX ECOLUX 6480 Series

TFR5 Room or outdoor temperature sensor. CombiTemp TM

ATEX-manual for units

DMP 343. Industrial Pressure Transmitter. Without Media Isolation. accuracy according to IEC 60770: 0,35 % FSO. Nominal pressure

JUMO extherm-at Type , Explosion-proof surface-mounted thermostat for zones 1, 2, 21, and 22

Nessie Coils for VDH and VDHT valves

Guide for installers. METTLER TOLEDO MultiRange System solution analog Ex1. Hazardous area. Safe area

User manual Version Ex Remote station XGA 15" family type 17-71KB-45../... Ex Remote station SXGA 18" family type 17-71KB-55../...

MB 204/MB 204-Ex. Multi-Barrier for PROFIBUS PA and FOUNDATION Fieldbus 10/ EN

Sensor technologies Proximity sensors Series ST4. Brochure

Inductive sensor With analog output BI15-M30-LI-EXI

1.1. IEC Contactors and Starters. Contents Description Relays and Timers... Miniature Controls... Contactors and Starters. XT IEC Power Control

Material: Weight: Shaft Loads: Operating Temp.: Storage Temp.: Shock: Vibration: Bump: Humidity: Enclosure Rating: Cable: Cable Glands:

LMP 331 LMP 331. Screw-In Transmitter with piezoresistive Stainless Steel Sensor

Model JDF Field Indicator

Inductive sensor NI10-M18-Y1X-H1141

Certificate No.: i IECEx SIR issue No.:1 9.!~~~t~I~t.CJ!y:... Issue No.1 ( ) Status;

TFRH Hygienic RTD temperature sensor. CombiTemp TM

Material: Weight: Operating Temp.: Storage Temp.: Shock: Vibration: Bump: Humidity: Enclosure Rating: Cable: Cable Glands:

Datasheet EC-750 Ex DOME Camera

Inductive sensor BI1.5-EG08K-Y1

TYPE APPROVAL CERTIFICATE

- special pressure ranges - variety of electrical and mechanical. Characteristics. - other versions on request

Analog Input Module HART Ex n Inputs, 8 Channels Series 9461/15

SITRANS F flowmeters SITRANS F M. Transmitter MAG 6000 I/6000 I Ex d e 4/43

EXEL. Ex de. - Double locking system operated by hexagonal-head tool - Double channel electronic ballast - Zones 1, 2, 21, 22. G13 bi-pin lamp holder

DMP 331 DMP 331. Industrial Pressure Transmitter. for Low Pressure. Stainless Steel Sensor. Pressure Transmitter. Industrial. tri-matic.

PRE Series 16 Amp Plugs and Sockets Increased Safety

DMP 339. Pressure Transmitter. with G ¼" flush diaphragm. Pressure Transmitter. Industrial. accuracy according to IEC 60770: 0.

DMP 331Pi. Precision. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm. Pressure Transmitter.

Sensor technologies Distance measuring sensors Series SM6. Brochure

DMP 331i DMP 333i. Precision Pressure Transmitter. Stainless Steel Sensor. accuracy according to IEC 60770: 0.1 % FSO

KVT Split cable glands

Flow Measurement SITRANS F M

Circuit-Breakers for Motor Protection Series 8523/8

DS 400 P. Intelligent Electronic Pressure Switch in Hygienic Stainless Steel Ball Housing. on hygienic process connections

DS 200 P DS 200 P. Electronic Pressure Switch with Flush Process Connection

Horn loudspeaker, Ex proof, short/long flare

DMP 331i / DMP 333i LMP 331 i

Bimetal Temperature Switch

SERIES 400 SERIES 620

Level Measurement Point level measurement - RF Capacitance switches

RCA PLUGS & JACKS Bulk Pkg (2) Bulk Pkg (2) Bulk Pkg (2) Bulk Pkg (2)

Guide for installers. METTLER TOLEDO MultiRange System solution Point Ex.

TFRN Industrial RTD temperature sensor. CombiTemp TM

Quality products from a single source

1.1. IEC Contactors and Starters. Contents Description Relays and Timers... Miniature Controls... Contactors and Starters. XT IEC Power Control

Sentronic PLUS Electronic Pressure Regulator. Installation Manual

Explosion Proof Audible Signal db(a) Series YA60

1.1. IEC Contactors and Starters. Contents Description Relays and Timers... Miniature Controls... Contactors and Starters. XT IEC Power Control

2291 Guided Wave Radar Level Transmitter

Amphenol. Circular. Connectors C 16-1 / C Circular Connectors. Amphenol-Tuchel Electronics

-V- New. Connecting cables for valves, socket type B, industry standard Type codes Connecting cable with PUR cable sheath NEBV B2 W 3 F P K 0.

Explosion Proof Audible Signal db(a) Series YA60

TFRN Industrial RTD temperature sensor. CombiTemp TM

SITRANS F M. Transmitter MAG 5000/6000 4/33

1.1. IEC Contactors and Starters. Contents Description Relays and Timers... Miniature Controls... Contactors and Starters. XT IEC Power Control

Flow Measurement SITRANS F M

110 Volt AC at 50 Hertz, 120 Volt AC at 60 Hertz. 20 Amp (UL Continuous), 7 Amp (AC-3), 22 Amp (AC-1)

General Specifications

Filters for Power Lines (Low Leakage Current)

Pressure transmitter For applications in hazardous areas Model IS-3

LMP 305. Slimline Probe. Stainless Steel Sensor. accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % FSO.

DKS 40: Incremental Encoder

Installation instructions Ex frames

KVT Split cable glands

DS 210. Electronic Pressure Switch. Without Media Isolation. accuracy according to IEC 60770: 0.35 % FSO. Nominal pressure

SERIES x5. Nickel-plated brass Connection 1) PUR cable type 1 Degree of protection. IP 67 Mounting. Embeddable Max. switching frequency

Connecting cables for valves, socket type A, EN Type codes Connecting cable with PUR cable sheath

Product group 1. Product description. At a glance. Cable entry systems for entering pre-terminated cables

Transcription:

I Ex-junction box I GHG 791 001 R0001 GHG 791 001 R0006 GHG 791 0101 R000 GHG 791 0101 R0001 Technical data GHG 791 01 up to 6 terminals / GHG 791 0 up to 8 terminals Marking accd. to 94/9/EC II G Ex dem ia II, IIC T6 / II D Ex td A1 IP66 T80 C EC-Type Examination Certificate PTB 00 ATEX 3108 IECEx Certificate of Conformity IECEx BKI 07.0034 Marking accd. to IECEx Ex e II T6 / Ex ia IIC T6 Ex td A1 IP66 T58 C Permissible ambient temperature 0 C to +40 C / 55 C to +40 C (option) Rated voltage 690 V / 550 V 1) Rated current depends on terminal cross section Terminal cross section max. 3 x 4 mm or 1 x 10 mm with pin cable lug + 1 x.5 mm fine wire max. 3 x 6 mm or 4 x 4 mm solid-wire Protection class I Degree of protection accd. to EN 6059 IP66 Enclosure material Polyamide GHG 791 01 up to 6 terminals Connecting terminals max. 4 x M5 for cable Ø 10-17 mm max. 4 x M0 metal thread 4 x + 1 PE 81.5 x 100 x 61 mm approx. 0.3 kg GHG 791 0 up to 8 terminals Connecting terminals 1) for cage clamp terminals max. 6 x M5 for cable Ø 10-17 mm max. 6 x M3 for cable Ø 1-1 mm max. 6 x M0 metal thread 6 x + PE 117.5 x 113.5 x 73.5 mm approx. 0.5 kg EATON S CROUSE-HINDS BUSINESS..7

I Ex-junction box I GHG 791 0101 R0001 GHG 791 0101 R0019 GHG 791 0101 R0068 GHG 791 001 R0006 Ordering details Content Cable gland No. of terminals Order No. GHG 791 01 up to 6 terminals x M5 for cable Ø 10-17 mm 4 x Ex-e, 1 x PE GHG 791 0101 R0001 4 x M5 for cable Ø 10-17 mm incl. x blanking plug M5 4 x Ex-e, 1 x PE GHG 791 0101 R000 4 x M0 metal thread incl. x threaded plug M0 4 x Ex-e, 1 x PE GHG 791 0101 R0019 4 x M5 for cable Ø 10-17 mm 4 x 4 Ex-e 1), x PE incl. x blanking plug M5 GHG 791 0101 R0069 4 x M0 metal thread 4 x 4 Ex-e 1), x PE incl. x threaded plug M0 GHG 791 0101 R0068 GHG 791 0 up to 8 terminals 4 x M5 for cable Ø 10-17 mm incl. x blanking plug M5 6 x Ex-e, x PE GHG 791 001 R0006 4 x M3 for cable Ø 1-1 mm incl. x blanking plug M3 6 x Ex-e, x PE GHG 791 001 R0007 6 x M5 for cable Ø 10-17 mm incl. 4 x blanking plug M5 6 x Ex-e, x PE GHG 791 001 R0001 6 x M3 for cable Ø 1-1 mm incl. 4 x blanking plug M3 6 x Ex-e, x PE GHG 791 001 R000 6 x M0 metal thread incl. 4 x threaded plug M0 8 x Ex-e, 1 x PE GHG 791 001 R0003 Other applications available on request. 1) Cage clamp terminal Accessories Mounting plate for junction box 791 01 Size 1 Wall mounting snap on GHG 610 1953 R0101 Size 1 for trellis mounting snap on GHG 610 1953 R0103 Size 1 pipe clamp snap on GHG 610 1953 R010 Protective canopy size for mounting plate size 1 GHG 610 1955 R0101 Mounting plate for junction box 791 0 Size Wall mounting snap on GHG 610 1953 R0104 Size for trellis mounting snap on GHG 610 1953 R0106 Size pipe clamp snap on GHG 610 1953 R0105 Protective canopy size for mounting plate size GHG 610 1955 R010 Details for accessories see page..80 up to..84...8 EATON S CROUSE-HINDS BUSINESS

I Ex-junction box I GHG 791 001 R0006 GHG 791 0101 R0068 GHG 791 0101 R0019 GHG 791 0101 R0001 Dimension drawing 180 100 X91 61 10 100 X91 10 61 1 81. 5 X48.5 5.6 81. 5 X48.5 M0x1.5 Type 791 01 4 4 M0x1.5 Type 791 01 for metal cable glands 195 113.5 X105 73.5 10.5 113 X 105 74 158 Dimensions in mm 117. 5 X55 56 117,5 M0x1,5 6 55 Type 791 0 56 X = fixing dimensions Type 791 0 for metal cable glands EATON S CROUSE-HINDS BUSINESS..9

I Ex-e/Ex-i terminal box I GHG 791 0101 R0003 GHG 791 0101 R0005 GHG 791 001 R0011 GHG 791 001 R0008 Technical data GHG 791 01 up to 6 terminals I GHG 791 0 up to 1 terminals Marking accd. to 94/9/EC II G Ex dem ia II, IIC T6 / II D Ex td A1 IP66 T80 C EC-Type Examination Certificate PTB 00 ATEX 3108 IECEx Certificate of Conformity IECEx BKI 07.0034 Marking accd. to IECEx Ex e II T6 / Ex ia IIC T6 Ex td A1 IP66 T58 C Permissible ambient temperature 0 C to +40 C 55 C to +40 C (option) Rated voltage 690 V Protection class I Degree of protection accd. to EN 6059 IP66 Enclosure material Polyamide Enclosure colour black GHG 791 01 up to 6 terminals Rated current max. 30 A Connecting terminals up to 4 mm max. x M5 or 1 x M5 + x M1 81.5 x 100 x 61 mm approx. 0.3 kg GHG 791 0 up to 1 terminals Rated current max. 39 A Connecting terminals up to 6 mm max. x M5 or 1 x M3 + 1 x M5 or 1 x M5 + 4 x M1 117.5 x 113.5 x 73.5 mm approx. 0.5 kg..14 EATON S CROUSE-HINDS BUSINESS

I Ex-e/Ex-i terminal box I GHG 791 001 R0008 GHG 791 001 R0011 GHG 791 0101 R0005 GHG 791 0101 R0003 Ordering details Content Cable gland No. of terminals Order No. Type 791 01 up to 6 terminals assembled with screw terminals x.5 mm² + PE/PA-terminals x 4 mm² Ex-e 1 x M5 for cable Ø 8-17 mm 6 x Ex-e 1 x M5 for cable Ø 4.5-7 mm 4 x PE/PA 1 x blanking plug for Ø 4.5-7 mm GHG 791 0101 R0003 Ex-i 1 x M5 for cable Ø 8-17 mm 6 x Ex-i 1 x M5 for cable Ø 4.5-7 mm 4 x PE/PA 1 x blanking plug for Ø 4.5-7 mm GHG 791 0101 R0004 Ex-e 1 x M5 for cable Ø 8-17 mm 6 x Ex-e x M1 for cable Ø 4-7 mm 4 x PE/PA 1 x blanking plug for M1 GHG 791 0101 R0005 Ex-i 1 x M5 for cable Ø 8-17 mm 6 x Ex-i x M1 for cable Ø 4-7 mm 4 x PE/PA 1 x blanking plug for M1 GHG 791 0101 R0006 Type 791 01 up to 6 terminals assembled with screwless terminals x.5 mm² + PE/PA-terminals x 4 mm² Ex-i 1 x M5 for cable Ø 8-17 mm 6 x Ex-i 1 x M5 for cable Ø 4.5-7 mm 1 x PE/PA 1 x blanking plug for Ø 4.5-7 mm GHG 791 0101 R0008 Ex-e 1 x M5 for cable Ø 8-17 mm 6 x Ex-e x M1 for cable Ø 4-7 mm 1 x PE/PA 1 x blanking plug for M1 GHG 791 0101 R0009 Ex-i 1 x M5 for cable Ø 8-17 mm 6 x Ex-i 1 x M1 for cable Ø 4-7 mm 1 x PE/PA 1 x blanking plug for M1 GHG 791 0101 R0010 Type 791 0 up to 1 terminals assembled with screw terminals x.5 mm² + PE/PA-terminals x 4 mm² Ex-e 1 x M5 for cable Ø 8-17 mm 1 x Ex-e 1 x M3 for 4 cable Ø 4.5-7 mm 4 x PE/PA x blanking plug for Ø 4.5-7 mm GHG 791 001 R0008 Ex-i 1 x M5 for cable Ø 8-17 mm 1 x Ex-i 1 x M3 for 4 cable Ø 4.5-7 mm 4 x PE/PA x blanking plug for Ø 4.5-7 mm GHG 791 001 R0009 Ex-e 1 x M5 for cable Ø 8-17 mm 1 x Ex-e 4 x M1 for cable Ø 4-7 mm 4 x PE/PA x blanking plug for M1 GHG 791 001 R0010 Ex-i 1 x M5 for cable Ø 8-17 mm 1 x Ex-i 4 x M1 for cable Ø 4-7 mm 4 x PE/PA x blanking plug for M1 GHG 791 001 R0011 Type 791 0 up to 1 terminals assembled with screwless terminals x.5 mm² + PE/PA-terminals x 4 mm² Ex-i 1 x M5 for cable Ø 8-17 mm 1 x Ex-i 1 x M3 for 4 cable Ø 4.5-7 mm 4 x PE/PA 1 x blanking plug for Ø 4.5-7 mm GHG 791 001 R0013 Ex-e 1 x M5 for cable Ø 8-17 mm 1 x Ex-e 4 x M1 for cable Ø 4-7 mm 4 x PE/PA x blanking plug for M1 GHG 791 001 R0014 Ex-i 1 x M5 for cable Ø 8-17 mm 1 x Ex-i 4 x M1 for cable Ø 4-7 mm 4 x PE/PA x blanking plug for M1 GHG 791 001 R0015 Other applications available on request. EATON S CROUSE-HINDS BUSINESS..15

I Ex-e/Ex-i terminal box I GHG 791 0101 R0003 GHG 791 0101 R0005 GHG 791 001 R0011 GHG 791 001 R0008 Accessories Mounting plate for junction box 791 01 Size 1 Wall mounting snap on GHG 610 1953 R0101 Size 1 Trellis mounting snap on GHG 610 1953 R0103 Size 1 Pipe clamp snap on GHG 610 1953 R010 Protective canopy size 1 for mounting plate size 1 GHG 610 1955 R0101 Mounting plate for junction box 791 0 Size Wall mounting snap on GHG 610 1953 R0104 Size Trellis mounting snap on GHG 610 1953 R0106 Size Pipe clamp snap on GHG 610 1953 R0105 Protective canopy size for mounting plate size GHG 610 1955 R010 Details for accessories see page..80 up to..84. Dimension drawing 100 X91 61 Type 791 01 Dimensions in mm 81. 5 X48.5 PE PE 1 3 113.5 X104.5 73.5 X54 117. 5 PE PE PE 1 3 4 Type 791 0 X = fixing dimensions..16 EATON S CROUSE-HINDS BUSINESS