SURFACE MOUNT HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT

SURFACE MOUNT HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT SERIES SRF00 SRF00D SRF00DD SRF0 SRF0D SRF0DD RELAY TYPE Repeatable, RF relay Repeatable, RF relay with internal diode for coil transient suppression Repeatable, RF relay with internal diodes for coil transient suppression and polarity reversal protection Sensitive, repeatable, RF relay Sensitive, repeatable, RF relay with internal diode for coil transient suppression Sensitive, repeatable, RF relay with internal diodes for coil transient suppression and polarity reversal protection DESCRIPTION The ultraminiature SRF00 and SRF0 relays are designed to provide a practical surface-mount solution with improved RF signal repeatability over the frequency range. These relays are engineered for use in RF attenuator, RF switch matrices, ATE and other applications that require dependable high frequency signal fidelity and performance. The SRF00 and SRF0 feature: High repeatability Broader bandwidth Metal enclosure for EMI shielding High isolation between control and signal paths High resistance to ESD The following unique construction features and manufacturing techniques provide excellent robustness to environmental extremes and overall high reliability: Uniframe motor design provides high magnetic efficiency and mechanical rigidity Minimum mass components and welded construction provide maximum resistance to shock and vibration Advanced cleaning techniques provide maximum assurance of internal cleanliness Hermetically sealed Solder Dipped Leads, (RoHS compliant solder option available) The Series SRF00D/SRF0D and SRF00DD/SRF0DD relays have internal discrete silicon diodes for coil suppression and polarity reversal protection. This hybrid package reduces required PC board floor space byreducing the number of external components needed to drive the relay. ENVIRONMENTAL AND PHYSICAL SPECIFICATIONS Temperature (Ambient) Vibration (General Note I) Shock (General Note I) Enclosure Weight Storage Operating SRF00 SRF0 65 C to +5 C 55 C to +85 C 0 g s to 500 Hz 0 g s, 6ms half sine Hermetically sealed 0.09 oz. (.55g) max. 0.6 oz. (.5g) max. INTERNAL CONSTRUCTION UNIFRAME ARMATURE UPPER STATIONARY CONTACT MOVING CONTACT LOWER STATIONARY CONTACT 00 TELEDYNE RELAYS (800) 8-7007 www.teledynerelays.com SRF00/SRF0 Page

TYPICAL RF CHARACTERISTICS (See RF Notes) SRF00YZ Isolation Across Contacts (RF Note ) SRF00YZ Pole-Pole Isolation (RF Note 5) 0 0-0 -0-0 -0 Isolation(dB) -0-0 PNC PNO P-P Isolatlon(dB) -0-0 -50 De-Energized Energized -50-60 -60-70 SRF00YZ Insertion Loss (RF Note 6) SRF00YZ VSWR (RF Note 6).5 0 -.5 - Insertion Loss(dB) -6-8 PNC PNO VSWR.5 PNC PNO -0.5 -. SRF00/SRF0 Time Response (RF Note 6) 0.9 0.7 90% 7ps reference Volt 0.5 6.ps propagation delay time 0. 0. 5.ps pulse rise time 0% -0. -00 0 00 00 00 00 500 600 700 800 900 Time (ps) RF NOTES. Test conditions: a. Fixture:.0 copper clad, reinforced PTFE, RT/duroid 600 with SMA connectors. (RT/duroid is a registered trademark of Rogers Corporation.) b. RF ground shield is soldered to PCB RF ground plane. c. Room ambient temperature. d. Terminals not tested were terminated with 50-ohm load. e. Contact signal level: 0 dbm. f. No. of test samples:.. Data presented herein represents typical characteristics and is not intended for use as specification limits.. Data is per pole, except for pole-to-pole data.. Data is the average from readings taken on all open contacts. 5. Data is the average from readings taken on poles with coil energized and de-energized. 6. Data is the average from readings taken on all closed contacts. 7. Test fixture effect de-embedded from frequency and time response data. SRF00/SRF0 Page SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE 00 TELEDYNE RELAYS

GENERAL ELECTRICAL SPECIFICATIONS (@5 C) Contact Arrangement Rated Duty Contact Resistance Contact Load Rating Contact Life Ratings Coil Operating Power Operate Time Release Time Intercontact Capacitance Insulation Resistance Dielectric Strength Negative Coil Transient (Vdc) Diode P.I.V. (Vdc) Form C (DPDT) Continuous 0.5 Ω max. Resistive: Amp/8Vdc Low level: 0 to 50 μa @ 0 to 50 mv 0,000,000 cycles (typical) at low level SRF00-5: 500 mw @ nominal coil SRF0-5: 50 mw @ nominal coil SRF00:.0 ms max. SRF0: 6.0 ms max. SRF00:.0 ms max. SRF0:.0 ms max. 0. pf typical,000 MΩ min. between mutually isolated terminals 50 Vrms (60 Hz) @ atmospheric pressure SRF00D/SRF0D, SRF00DD/SRF0DD SRF00D/SRF0D, SRF00DD/SRF0DD DETAILED ELECTRICAL SPECIFICATIONS (@5 C) BASE PART NUMBERS (SRF00, SRF00D, SRF00DD) SRF00-: 70 mw @ nominal coil SRF0-: 69 mw @ nominal coil SRF00D, SRF00DD:.0 ms max. SRF0D, SRF0DD: 7.5 ms max. SRF00-5 SRF00D-5 SRF00DD-5.0 max 00 min. SRF00- SRF00D- SRF00DD- Coil Voltage, Nominal (Vdc) 5.0.0 SRF00, SRF00D 50 90 Coil Resistance (Ohms ±0%) SRF00DD (General 9 90 Note II) Coil Current (madc@ 5 Min. 9. 5.6 C)(RF00DD Series) Max. 8..8 Pick-up Voltage (Vdc max.) SRF00, SRF00D,.6 9.0 SRF00DD.9 0.0 BASE PART NUMBERS (SRF0, SRF0D, SRF0DD) SRF0-5 SRF0D-5 SRF0DD-5 SRF0- SRF0D- SRF0DD- Coil Voltage, Nominal (Vdc) 5.0.0 SRF0, SRF0D 00 850 Coil Resistance (Ohms ±0%) SRF0DD (General 6 850 Note II) Coil Current (madc@ 5 Min. 56.8.7 C)(RF0DD Series) Max. 78. 5.0 Pick-up Voltage (Vdc max.) SRF0, SRF0D,.6 9.0 SRF0DD.7.0 00 TELEDYNE RELAYS (800) 8-7007 www.teledynerelays.com SRF00/SRF0 Page

OUTLINE DIMENSIONS (Viewed From Terminals) SCHEMATIC DIAGRAMS 9 8 7 6 9 8 7 6 9 8 7 6 SRF00/RF0 SRF00D/SRF0D SRF00DD/SRF0DD NOTES:. DIMENSIONS ARE IN INCHES, METRIC EQUIVALENTS SHOWN IN ( ).. POSTITIONS 5 AND 0 ARE FOR UNINSULATED CASE GROUND OPTIONS.. NO PROTRUSION BELOW BOTTOM OF HEADER WHEN GROUND PINS ARE INSTALLED. TO ORDER THE CASE GROUND OPTION, AFTER THE SERIES DESIGNATOR, ADD Y TO THE PART NUMBER FOR POSITION 5 OR Z TO THE PART NUMBER FOR POSITION 0. Teledyne Part Numbering System for SRF00/SRF0 Relays Relay Series SRF00DD Y - 5 / R R = RoHS Compliant * Surface Mount Relays are Solder-Coated by default (Note ) Coil Voltage Ground Pin Optional (See Appendix D) NOTES: Standard Relay lead finish: Solder-Dipped Leads (Sn60/Pb0) For RoHS Solder, add /R at end of part number. EX: SGRF0D-5/R RoHS Solder: (Sn99./Cu0.7) The slash and characters appearing after the slash are not marked on the relay. D = Internal Diode for coil transient suppression DD = Internal Diodes for coil transient suppression and polarity reversal protection GENERAL NOTES I. Relays will exhibit no contact chatter in excess of 0 μsec or transfer in excess of μsec. II. For reference only. Coil resistance not directly measureable at relay terminals due to internal series diode. SRF00/SRF0 Page SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE 00 TELEDYNE RELAYS

TYPICAL SIGNAL INTEGRITY CHARACTERISTICS @ 0 Gbps Normally Closed (Typ.) +0 mv 0 V -0 mv 0 ps 0 ps 80 ps 0 ps 60 ps Bit Rate Eye Height Eye Width Jitter P-P 0 Gbps 7.9 mv 85.8 ps. ps Normally Open (Typ.) +0 mv 0 V -0 mv 0 ps 0 ps 80 ps 0 ps 60 ps Bit Rate Eye Height Eye Width Jitter P-P 0 Gbps 7.8 mv 88. ps 8.00 ps PATTERN GENERATOR SETTINGS 0 Gbps Random Pulse Pattern Generator - PRBS signal PRBS output of 00 mv P-P (nominal) RF PCB effect (negligible) not removed from measurement Data shown is typical of both poles 00 TELEDYNE RELAYS (800) 8-7007 www.teledynerelays.com SRF00/SRF0 Page 5

TYPICAL SIGNAL INTEGRITY CHARACTERISTICS @ 8 Gbps +50 mv 0 V -50 mv 0 ps 0 ps 0 ps 60 ps 80 ps 00 ps Bit Rate Eye Height Eye Width Jitter P-P 8 Gbps 85 mv 6. ps 0. ps PATTERN GENERATOR SETTINGS 8 Gbps Random Pulse Pattern Generator - PRBS signal PRBS output of 00 mv P-P (nominal) RF PCB effect (negligible) not removed from measurement Data shown is typical of both poles SRF00/SRF0 Page 6 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE 00 TELEDYNE RELAYS