Contents: Product Description and Notes Page 1 Tilt Angle and Rotation Page 1 Ventilation Requirements Page 2 Display Dimensions Front, Top, Bottom & Right Side Page 3 Rear Page 4 Cosmetic Colors Page 4 Display Dimensions w/optional Speakers and Stand Page 5 Optional Stand Dimensions Page 6 Optional Speaker Dimensions Page 7 Dimensions w/optional Wall Mount Page 8 Connections Page 9 Control Codes Page 10 Product Description Type: Plasma Monitor Screen Surface: Anti-Reflective Resolution: 1024x768 Dimensions: 40.79 (W) x 25.36 (H) x 5.00 (D) Aspect Ratio: 16:9 Weight: 81.6 lbs FCC: Class B Notes This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended to be a step-by step procedure for installation. Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local building codes. All mounts should make secure contact to wood studs. 4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally to fill the screen using the menus (see Aspect Modes in menus and user manual). Distances are in inches, for millimeters multiply by 25.4. Distances may vary ±5%. Tilt Angle and Rotation Below are the maximum angles that the monitor can be tilted in the landscape position only. Do not install in the portrait position. Landscape 20deg Max. 20 deg P42XP10-BK Page 1 of 10
Ventilation Requirements (all models) Dimensions below are minimum required for proper ventilation. WALL 50mm 2 WALL 50mm 2 50mm 2 0 to 40 degc 32 to 104 degf WALL 50mm 2 50mm 2 NOTE: The ventilation space should not be covered or closed off at the front of the opening. If for some reason the opening needs to be covered, other means of ventilation will need to be incorporated into the design. Contact NEC for design review and recommendations. P42XP10-BK Page 2 of 10
Display dimensions 0.87 38.27 36.69 34.33 30.31 1.53 3.28 5.00 FILTER PANEL SURFACE 0.12 TOP VIEW 1.62 37.54 1.62 1.80 21.72 1.80 20.43 (PANEL DISPLAY AREA) 36.28 (PANEL DISPLAY AREA) 40.79 19.70 LED IR 9.40 2.80 25.36 11.85 9.60 2.00 0.51 RIGHT SIDE VIEW 14.80 3.23 2.36 0.40 0.33 2.46 0.47 0.88 POWER SWITCH AC IN 16.51 18.50 (TERMINAL PANEL) BOTTOM VIEW P42XP10-BK Page 3 of 10
Display dimensions (cont.) 700 445 for PC 4-M4 Depth 10 for MOUNT UNIT 4-M8 Depth 16 for SPEAKER 8-M4 0.70 Label 7.00 0.44 3.58 4.02 11.81 7.00 0.70 0.63 4.40 8.24 23.78 (STAND) REAR VIEW P42XP10-BK Page 4 of 10
Dimensions with optional speakers and stand 23.78 6.83 5.00 2.32 1.54 3.15 0.04 0.04 3.15 14.21 26.50 47.17 2.80 1.50 25.36 6.80 16.40 P42XP10-BK Page 5 of 10
Optional Stand Dimensions (ST-P42P1) Table Top Stand ST-P42P1 2.80 0.79 9.66 0.79 Ø 0.39 13.60 16.4 3.00 2.20 90 +1.0-0.7 5.96 0.87 1.56 0.08 1.77 1.77 P42XP10-BK Page 6 of 10
Optional Speaker Dimensions (SP-P42P1) Optional Speakers SP-P42P1 3.15 1.54 0.79 0.79 4-M4 INPUT TERMINAL 25.36 14.75 P42XP10-BK Page 7 of 10
Dimensions with optional Wall Mount Kit (WMK3260-L) Label P42XP10-BK Page 8 of 10
Connections Speaker Terminal Connections Located at bottom of display Control Panel Power Switch P42XP10-BK Page 9 of 10
Control Codes Function Code Data POWER ON 01 30 2A 30 41 30 43 02 43 32 30 33 44 36 30 30 30 31 03 18 0D OFF 01 30 2A 30 41 30 43 02 43 32 30 33 44 36 30 30 30 34 03 1D 0D INPUT SWITCH RGB1 (15pin HD) 01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 31 03 18 0D RGBHV 01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 32 03 1B 0D DVI 01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 33 03 1A 0D DVD3/HD3 (HDMI) 01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 34 03 1D 0D VIDEO1 01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 35 03 1C 0D VIDEO2 01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 36 03 1F 0D S-Video 01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 37 03 1E 0D DVD1/HD1 01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 43 03 6A 0D DVD2/HD2 01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 44 03 6D 0D AUDIO MUTE ON 01 30 2A 30 45 30 41 02 30 30 38 44 30 30 30 31 03 62 0D OFF 01 30 2A 30 45 30 41 02 30 30 38 44 30 30 30 30 03 63 0D PICTURE MODE BRIGHT 01 30 2A 30 45 30 41 02 30 32 31 41 30 30 30 33 03 6E 0D STANDARD 01 30 2A 30 45 30 41 02 30 32 31 41 30 30 30 34 03 69 0D CINEMA1 01 30 2A 30 45 30 41 02 30 32 31 41 30 30 30 35 03 68 0D CINEMA2 01 30 2A 30 45 30 41 02 30 32 31 41 30 30 30 42 03 1F 0D DEFAULT 01 30 2A 30 45 30 41 02 30 32 31 41 30 30 30 43 03 1E 0D SCREEN MODE: NORMAL 01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 31 03 1B 0D FULL 01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 32 03 18 0D ZOOM 01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 33 03 19 0D DYNAMIC 01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 34 03 1E 0D 2.35:1 01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 42 03 68 0D 14:9 01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 43 03 69 0D UNDERSCAN 01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 44 03 6E 0D TRUE 01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 45 03 6F 0D AUTO PICTURE ON 01 30 2A 30 45 30 41 02 30 30 31 45 30 30 30 31 03 6A 0D OFF 01 30 2A 30 45 30 41 02 30 30 31 45 30 30 30 30 03 6B 0D FILM MODE ON 01 30 2A 30 45 30 41 02 30 32 32 33 30 30 30 32 03 1E 0D OFF 01 30 2A 30 45 30 41 02 30 32 32 33 30 30 30 31 03 1D 0D NOTE: Contact your NEC rep for codes not listed. NOTE: Use a cross/reverse/null modem cable. Cable Connection Communication Protocol: Interface: RS-232C Parity: None Communication: Asynchronous Stop Bit: 1 bit Baud Rate: 9600 bps Communication Code: ASCII Data Length: 8 bits PC Control Connector (D-Sub 9P) NOTE: If so desired, jumper Request to send and Clear to Send together on both ends of the cable to simplify cable connection. These connections are not required. The only connections required are pins 2 (RxD), 3 (TxD) and 5 (GND). P42XP10-BK Page 10 of 10