fco, MHz Nom. * Not for use with DC voltage at input and output ports 3dB 1dB F co F 20 F R E QUE NC Y F R 20dB Frequency (MHz)

Similar documents
Features wideband, 10 to 500 MHz. Applications military, hi-rel applications stabilizing generator outputs reducing amplitude variations

Applications protects low noise amplifiers and other devices from ESD or input power damage military, hi-rel applications

Features low conversion loss, 6.05 db typ. good L-R isolation, 35 db typ, L-I, 30 db typ. wideband, 10 to 2000 MHz rugged shielded case

Features excellent conversion loss, 6.0 db typ. high L-R isolation, 40 db typ. L-I isolation, 55 db typ. rugged welded construction

LAVI-U252VH+ Performance Charts. LO=+18dBm LO=+21dBm LO=+24dBm. LO=+18dBm LO=+21dBm LO=+24dBm. LO=+18dBm LO=+21dBm LO=+24dBm

Features low conversion loss, 6.79 db typ. wideband, 1 to 1000 MHz. Applications HF/VHF/UHF cellular federal & defense communications

Features low conversion loss, 6.11 db typ. excellent L-R isolation, 44 db typ. CONVERSION LOSS (db) Mid-Band m. Range f L. Conversion Loss (db)

ADE-R3GLH+ CONVERSION LOSS 50. ISOLATION (db) 10 LO= +7 dbm LO= +10 dbm LO=+13 dbm FREQUENCY (MHz) RF VSWR

Features low conversion loss, 5.94 db typ. aqueous washable J-leads for strain relief. CONVERSION LOSS (db) Mid-Band m. Range f L.

Frequency Mixer wide band

Limiter RLM Ω Broadband 950 to 2050 MHz. The Big Deal

USB Smart Power Sensor

No need for external driver, saving PCB space and cost.

SP6T RF Switch JSW6-23DR Ω High Power 3W 5 to 2000 MHz. The Big Deal

USB Smart Power Sensor

FCPM-6000RC. Mini-Circuits P.O. Box , Brooklyn, NY (718)

Monolithic Amplifier GVA-60+ Flat Gain, High IP to 5 GHz. The Big Deal

USB Smart Power Sensor

Orbital 694XA Series. Ka BAND EXTERNAL REFERENCE LNB with rear anchor posts. Wide range of Frequencies and Bandwidths LNB 1855R 1000 XA-WN60

4400X Series. Orbital. X-Band Ext Ref LNB. MIL Spec MIL-STD A, 45 db internal filter LNB630S-500X-WN60-G12. Orbital Features: Orbital Specs:

Features. = +25 C, IF= 100 MHz, LO= +13 dbm* Parameter Min. Typ. Max. Min. Typ. Max. Units

Orbital 4400X & 4400XI Series X-Band Ext Ref LNB

Features. = +25 C, IF = 0.5 GHz, LO = +15 dbm* Parameter Min. Typ. Max. Min. Typ. Max. Units

TGL2209 SM 8 12 GHz 50 Watt VPIN Limiter

TGL2210-SM_EVB GHz 100 Watt VPIN Limiter. Product Overview. Key Features. Applications. Functional Block Diagram. Ordering Information

= +25 C, IF= 100 MHz, LO = +15 dbm*

1.5 GHz to 4.5 GHz, GaAs, MMIC, Double Balanced Mixer HMC213BMS8E

6 GHz to 26 GHz, GaAs MMIC Fundamental Mixer HMC773A

= +25 C, IF= 100 MHz, LO = +17 dbm*

Features. = +25 C, IF= 100 MHz, LO= +15 dbm* Parameter Min. Typ. Max. Min. Typ. Max. Units

MICROLITHIC DOUBLE-BALANCED MIXER

MICROLITHIC DOUBLE-BALANCED I/Q MIXER

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

MICROLITHIC DOUBLE-BALANCED MIXER

MICROLITHIC DOUBLE-BALANCED MIXER

10 GHz to 26 GHz, GaAs, MMIC, Double Balanced Mixer HMC260ALC3B

MICROLITHIC DOUBLE-BALANCED MIXER

MICROLITHIC DOUBLE-BALANCED I/Q MIXER

GaAs MMIC Double Balanced Mixer

R&S ZVA-Zxx Millimeter-Wave Converters Specifications

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

GaAs, MMIC Fundamental Mixer, 2.5 GHz to 7.0 GHz HMC557A

MICROLITHIC DOUBLE-BALANCED MIXER

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Not recommended for new designs

STEVAL-TDR007V1. 3 stage RF power amplifier demonstration board using: PD57002-E, PD57018-E, 2 x PD57060-E. Features. Description

MICROLITHIC DOUBLE-BALANCED I/Q MIXER

MICROLITHIC DOUBLE-BALANCED MIXER

TGA2218-SM GHz 12 W GaN Power Amplifier

Keysight N9355/6 Power Limiters 0.01 to 18, 26.5 and 50 GHz High Performance Power Limiters. Technical Overview

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Parameter Min. Typ. Max. Units. Frequency Range 5 20 GHz. Minimum Insertion Loss db. Dynamic 5 GHz 23 db

R&S ZVA-Zxx Millimeter-Wave Converters Specifications

MICROLITHIC DOUBLE-BALANCED MIXER

Parameter Input Output Min Typ Max Diode Option (GHz) (GHz) Input drive level (dbm)

Agilent N9355/6 Power Limiters 0.01 to 18, 26.5 and 50 GHz

Orbital Ka-ISO. Ext Ref Ka LNB with integrated isolator. Orbital Research Ltd Marine Drive, White Rock, BC. Canada V4B 1A9

GaAs MMIC Double Balanced Mixer

Power Amplifier 0.5 W 2.4 GHz AM TR Features. Functional Schematic. Description. Pin Configuration 1. Ordering Information

HMC613LC4B POWER DETECTORS - SMT. SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA), GHz

R&S ZN-Z103 Calibration Unit Specifications. Data Sheet V02.01

The Hmc869LC5 is ideal for: Point-to-Point and Point-to-Multi-Point Radio. Parameter Min. Typ. Max. Units

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Parameter Input Output Min Typ Max Diode Option (GHz) (GHz) Input drive level (dbm)

= +25 C, IF= 100 MHz, LO = +15 dbm*

HMC814LC3B FREQ. MULTIPLIERS - ACTIVE - SMT. SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, GHz OUTPUT. Features. Typical Applications

Features. = +25 C, As a Function of LO Drive & Vdd. IF = 1 GHz LO = -4 dbm & Vdd = +4V

= +25 C, IF= 100 MHz, LO = +15 dbm*

GaAs MMIC Double Balanced Mixer

Features. = +25 C, IF = 1 GHz, LO = +13 dbm*

Keysight N9355/6 Power Limiters 0.01 to 18, 26.5 and 50 GHz High Performance Power Limiters. Technical Overview

HMC412BMS8GE MIXER - SINGLE & DOUBLE BALANCED - SMT. Typical Applications. Features. Functional Diagram. General Description

Features. Parameter Min. Typ. Max. Min. Typ. Max. Units

Parameter Min. Typ. Max. Min. Typ. Max. Units

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

GaAs MMIC Double Balanced Mixer

CMD257C GHz High IP3 I/Q Mixer. Features. Functional Block Diagram. Description

Features OBSOLETE. = +25 C, IF = 1.45 GHz, LO = +13 dbm [1]

OBSOLETE HMC908LC5 MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT. GaAs MMIC I/Q DOWNCONVERTER 9-12 GHz. Typical Applications. Functional Diagram

CMD176P GHz 4-Bit Digital Phase Shifter. Features. Functional Block Diagram. Description

R&S ZN-Z85 Switch Matrix Specifications

CMD179C GHz Fundamental Mixer. Features. Functional Block Diagram. Description

SURFACE MOUNT HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT

CMD180C GHz Fundamental Mixer. Features. Functional Block Diagram. Description

GaAs DOUBLE-BALANCED MIXER

High Power ARNS/IFF Limiter Module: Ultra Low Flat Leakage & Fast Recovery Time

Instruction Manual Model BlockUpconverter

FMMX9004 DATA SHEET. Field Replaceable SMA IQ Mixer From 15 GHz to 23 GHz With an IF Range From DC to 3.5 GHz And LO Power of +17 dbm.

Features. = +25 C, IF = 100 MHz, LO = 0 dbm, Vcc1, 2, 3, = +5V, G_Bias = +3.5V*

FMMX9002 DATA SHEET. Field Replaceable SMA IQ Mixer From 8.5 GHz to 13.5 GHz With an IF Range From DC to 2 GHz And LO Power of +19 dbm.

Features. = +25 C, LO = 0 dbm, Vcc = Vcc1, 2, 3 = +5V, G_Bias = +2.5V *

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

GaAs DOUBLE-BALANCED MIXER

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

OBSOLETE HMC215LP4 / 215LP4E. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram

HMC485MS8G / 485MS8GE. Features OBSOLETE. = +25 C, LO = 0 dbm, IF = 200 MHz*, Vdd= 5V

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Features OBSOLETE. = +25 C, As a Function of LO Drive. LO = +13 dbm IF = 70 MHz

Features. = +25 C, IF= 100 MHz, LO = +17 dbm*

CMD255C GHz High IP3 Fundamental Mixer. Features. Functional Block Diagram. Description

Transcription:

Coaxial Low Pass Filter Ω *DC to 27 MHz Maximum Ratings Operating Temperature - C to C Storage Temperature - C to C RF Power Input* W max. at 2 C DC Current Input to Output.A max. at 2 C * Passband rating, derate linearly to 3.W at C ambient. Permanent damage may occur if any of these limits are exceeded. Outline Drawing Features rugged unibody construction, small size 7 sections excellent power handling, W temperature stable low cost protected by U.S. Patent 6,943,646 Applications harmonic rejection transmitters/receivers lab use PASSBAND fco, MHz Nom. STOP BAND (loss, db) (:1) (loss < 1 db) (loss 3 db) F Fr Stopband Passband Max. Typ. Min. Typ. Typ. Typ. Typ. NO. OF SECTIONS *DC-27 31 41-68 8 1.2 7 * Not for use with DC voltage at input and output ports Electrical Specifications at 2 C CASE STYLE: FF74 Connectors SMA Model +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications.312 Across Flats in some models inch Outline Dimensions ( mm ) typical frequency response AT T E NUAT ION db db 3dB 1dB F co F F R E QUE NC Y F R db R F IN electrical schematic R F OUT B D E wt.4 1.43.312 grams.41 36.32 7.92. Frequency Typical Performance Data at 2 C Insertion Loss (:1).8 1.3.13 1.2.18 1.2.28 1..4 1.32 27.79 1.16 31 1.83 1.97 33.61 23.18 4 3.1 27.9 1 39.36.41 6.34 4.72 68 32.46 46.96 7 26.91 46.96 8 22.87 46.96 99 18.62 29.96 INSERTION LOSS VLF-27 INSERTION LOSS 8 7 6 6 7 8 9 FREQUENCY Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit s applicable established test performance criteria and measurement instructions. REV. E C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms ); Purchasers of this part are entitled M11777 to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/mclstore/terms.jsp Mini-Circuits EDR-6783/4 AD/TD/CP/AM 1714 www.minicircuits.com P.O. Box 3166, Brooklyn, NY 1123-3 (718) 934- sales@minicircuits.com Page 1 of 1 VLF-27 1 6 7 8 9 FREQUENCY

Coaxial Low Pass Filter Typical Performance Data FREQ. INSERTION LOSS @ - C @ +2 C @ + C INPUT RETURN LOSS OUTPUT RETURNLOSS @ - C @ +2 C @ + C @ - C @ +2 C @ + C.6.8.7 44.14 38.2 34.78 44.89 38.48 3.7..13.14 3.82 39.27 38.86 34.96 38. 38.9.12.18.21 44.67 39.7 33.22 36.88 34.2.76..28.32 26.73 26.24 26.24 24.71 24.37 24.4.31.41.48 19.61 19.39 19.42 19.6 19.21 19..42.4.63 17.7 17.31 17.3 17.3 17.39 17.41.2.66.77 19.63.7 21.28 18.93.1.77 27.8.74.88 23.33 23.2 22.76.97 21.38 21.71 27.61.79.93 23. 22.68 22.9 21.3 21.1 21.28 29.76.96 1.14 19. 18.62 17.9 18.32 18. 17.8 31 1.47 1.83 2.1.42 9.7 9.29.66.14 9.81 326 2.43 2.92 3.39 6.79 6.37 6.9 7.16 6.8 6.9 337 4.29 4.97.63 3.98 3.83 3.72 4.3 4.26 4.13 3 9.26.21 11.14 1.63 1.71 1.79 1.96 2. 2.9 366 14.8 1.18 16.23 1. 1.18 1. 1.29 1.43 1.2 377 19.2.4 21.77.74.91 1.4.96 1.13 1.26 38 23.3 24.4 2.81.68.84.97.84 1.2 1.16 39 2.76 27.28 28.74.68.83.96.84 1.1 1.1 39 28.62.26 31.8.8.74.88.76.9 1.11 31.81 33.61 3.34.6.7.88.74.93 1.9 7 36.87 38.96 41.1.7.74.8.73.93 1.9 41 43.18 4.33 46.81.7.72.84.74.94 1.16 4 49.82 3.1 6.2.46.63.76.68.87 1.6 47 4.73 44.2 43.7.39..66.69.91 1.11 49.77.27.2.31.48.8.6.86 1. 1 39.34 39.36 39.34.28.43..62.8.9 6 6.41.34 2.9.31.38.4.43.6.71 68 32.77 32.46 32.16.42.37.8.2.47.64 7 27. 26.91 26.86.23.37.7..44.66 8 22.7 22.87 23..22.37.1.23.4.69 99 18.86 18.62 18.8.8.8.78.32.3.67 1 16.78 16.74 16.8.34..71.3.61.77 12 14.41 14.49 14.1.38.6.89.33.2.69 12. 12.14 11.98.1.94 1.41.3.82 1.9 11.8 11.98 12.17 1.27 1.44 1.8.91 1.1 1.43 1 9.32 9.98.83 1.93 1.77 1.76 1.91 1.93 2.1 16 14.72 1.1 16.12.63.91 1.1.73.9 1.8 17 19.48 19.98.33.9.86 1.47.38.76.89 18 21.76 19.66 19.77.81 3.6 2.1.2.67 1. 19 18.32 18.6 19..63 1.9 1.48.46.94 1.44 16.39 16.3 16.27 1.7 1.9 2.88.98 1.69 2.66 REV. X1 87 Page 1 of 1

Coaxial Low Pass Filter Typical Performance Curves 1 2 3 4 6 INSERTION LOSS vs. TEMPERATURE - C @ Input Power = dbm +2 C @ Input Power = dbm + C @ Input Power = dbm 6 8 16 18 Frequency 1 2 3 4 1 2 3 4 INPUT RETURN LOSS vs. TEMPERATURE - C @ Input Power = dbm +2 C @ Input Power = dbm + C @ Input Power = dbm 6 8 16 18 Frequency OUTPUT RETURN LOSS vs. TEMPERATURE - C @ Input Power = dbm +2 C @ Input Power = dbm + C @ Input Power = dbm 6 8 16 18 Frequency REV. X1 87 Page 1 of 1

Case Style Outline Dimensions FF FF74 FF886 FF887 FF888 FF969 FF1118 FF114 CASE #. A B C D E WT GRAMS FF74 FF886 FF887 FF888 FF969 FF1118 FF114.4 (.41).62 (1.7).62 (1.7).4 (.41). (14.).4 (.41).4 (.41) Dimensions are in inches (mm). Tolerances: 2Pl. ±.3; 3Pl. ±.1 Notes: 1. Case material: Stainless steel. 2. Case finish: Passivation for FF888, gold plate on all remaining case style. 3. Round Flange may have.312 Across Flats in some models. 1.43 (36.32) 1.9 (48.26) 2.24 (6.9) 1.18 (29.97) 1.7 (44.4) 2.67 (67.82) 1.91 (48.1).312 (7.92). 22. 26. 7.. 17. 11.8 98-FF Rev.: AP (1/9/18) M1684 File: 98-FF.docx Sheet 7 of This document and its contents are the property of Mini-Circuits.

Mini-Circuits Environmental Specifications ENV28 All Mini-Circuits products are manufactured under exacting quality assurance and control standards, and are capable of meeting published specifications after being subjected to any or all of the following physical and environmental test. Specification Test/Inspection Condition Reference/Spec Operating Temperature - to C Ambient Environment Individual Model Data Sheet Storage Temperature - to C Ambient Environment Individual Model Data Sheet Barometric Pressure, Feet MIL-STD-2, Method, Condition D Humidity 9% RH, 6 C Units may require bake-out after humidity to restore full performance. MIL-STD-2, Method 3 Thermal Shock -6 to 12 C, cycles MIL-STD-2, Method 7, Condition B Vibration (High Frequency) g peak, - Hz, 12 times in each of three perpendicular directions (total 36) MIL-STD-2, Method 4, Condition D Mechanical Shock g, 6ms sawtooth, 3 shocks each direction 3 axes (total 18) MIL-STD-2, Method 213, Condition I ENV28 Rev: B 9/26/13 M143494 File: ENV28.pdf This document and its contents are the property of Mini-Circuits. Page: 1