Siemon s end-to-end cabling system is guaranteed to provide transmission performance margins in excess of industry standards for category 5e parameters, while featuring excellent EMI resistance. has been independently verified to perform to 60 MHz. 5.0 W W W. S I E M O N. C O M
SECTION CONTENTS MAX 5e Modules................... 5. 5. -MAX Patch Panels........................5. BladePatch 5e Modular Cords..............5.5 MC 5 Modular Cords....................5.6.......................5.7 W W W. S I E M O N. C O M 5.
MAX 5e SCREENED MODULES The screened MAX module is the cornerstone of our category 5e screened cabling systems. This product not only meets all TIA/EIA component specifications, but also exceeds ISO/IEC 80 nd edition and EN507 nd edition requirements for transfer impedance and shield effectiveness. Category 5e modules are qualified to 00 MHz. Decreased Termination Time Category 5e screened MAX modules can be terminated in less than three minutes. For the Data Center and Work Area Category 5e screened MAX is designed for use with both -MAX patch panels and 0G MAX faceplates. 6 5 Quick-Ground Termination No additional steps required for termination. shield is automatically terminated within the outlet. Fully Screened Design optimises shield effectiveness for protection from EMI Easy Identification Coloured icons provided for port identification Rear Shield Protection Robust rear shield protects IDC terminations and maintains shield effectiveness 5 6 Easy Termination Tool-less termination makes termination quick and easy in less than minutes Universal Compatibility Compatible with both T568A/B schemes Integrated Grounding No separate grounding tabs required 5. W W W. S I E M O N. C O M
MAX 5e SCREENED MODULES Outlets terminate all shielded and screened cable constructions AWG (0.6 0.5mm) size conductors. MX5-FS.............. Flat category 5e screened MAX module, T568A/B MX5-S............... Angled category 5e screened MAX module, T568A/B MX5-KS.............. Keystone category 5e screened MAX module, T568A/B Modules include one red and one blue icon. Note: Keystone version is designed for integration with various international mounting products and is not compatible with MAX mounting hardware. Doors available separately. Add B for bulk project pack of 00 modules. Technical Tip! Screened MAX modules are not side-stackable in standard MAX faceplates. 0G MAX faceplates are recommended. 0G MAX Faceplates page 0., MX-SM Surface Mount Boxes 0.5 W W W. S I E M O N. C O M 5.
-MAX PATCH PANELS -MAX 9 inch patch panels provide outstanding performance and reliability in a shielded, high-density modular solution. As outlets are snapped into place, resilient ground tabs assure that each outlet is properly grounded for maximum protection from outside interference. No secondary outlet grounding operations are required, reducing overall installation time. Integrated Grounding Panels feature integrated grounding via resilient ground tabs automatically engaged during MAX module insertion. 5 Slim Design Use flat screened MAX modules in - MAX patch panel for high density telecommunications room applications. Standard Fit Panels can be mounted directly on standard 9 inch relay rack or cabinet Durable Lightweight, high strength steel with black or metallic finish High Density 0Gb/s ports in just U up to 96 ports with cable sharing 5 Installation Friendly Individual modules snap into place, providing integrated grounding without additional steps Port Identification Bold port numbering enables quick identification of outlets Integral rear cable manager facilitates the orderly routing of horizontal cables as well as maintaining proper bend radius for optimum performance. -MAX PATCH PANELS Part # Description U TM-PNL-6-0.......6-port -MAX panel, black............. U TM-PNL-6.........6-port -MAX panel, metallic........... U TM-PNL--0.......-port -MAX panel, black............. U TM-PNL-.........-port -MAX panel, metallic........... U Panels include designation labels, cable ties and mounting hardware. Note: U =.5mm Blank MAX Modules page 0. 5. W W W. S I E M O N. C O M
BLADEPATCH 5e SCREENED MODULAR CORDS S iemon s category 5e BladePatch patch cords offer a unique solution for highdensity patching environments. They feature an innovative push-pull boot design to control the latch, enabling easy access and removal of the cord in tight-fitting areas. The BladePatch cords are ideal for patching blade servers, patch panels, or any equipment with high density RJ-5 outlets. Universal Compatibility Fits within any standard RJ-5 outlet. Push-Pull Boot Activates Latch Revolutionary Latch Simply push the boot forward to latch into the outlet and pull back to release. Revolutionary Design Patented push-pull latch design eliminates need to defeat thumb latch used in standard modular plug designs. Enables easy access and removal in high density patching environments Universal Wiring Compatible with T568A/B wiring schemes Snagless Push-pull design eliminates external thumb latch which can snag and break Low Profile Boot Design Optimises side-stackability of patch cords and allows use in even the most dense equipment High Density The push-pull design enables easy access and removal via the boot in tight-fitting areas. BLADEPATCH 5e SCREENED MODULAR CORDS Part # Description BP5S-(XX)M-(XX)L....... Category 5e screened BladePatch, double-ended, -pair stranded modular cord, with push-pull latching design, colour matching cord/boot, T568A/B, LS0H Use st (XX) to specify cord length: 0 = m,.5 =.5m, 0 = m, 0 = m, 05 = 5m, 7.5 = 7.5m Use nd (XX) to specify colour: 0 = black, 0 = white, 0 = red, 0 = grey, 05 = yellow, 06 = blue, 07 = green, 09 = orange Add B for bulk project pack of 00 modular cords. W W W. S I E M O N. C O M 5.5
MC 5E SCREENED MODULAR CORDS S iemon s screened MC 5e modular cords are manufactured using stranded screened cable that meets all category 5e specifications. Modular plugs have an overall shield and meet TIA-968-A and IEC 6060-7 specifications. T568A/B wired assemblies include coloured strain-relief boots and are available in a wide range of lengths. Shielded modular plugs are also available separately. Factory-Tested Cords are factory terminated and transmission tested to ensure compliance with applicable standards requirements. Compliance Plug geometry meets TIA-968-A and IEC 6060-7 specifications for modular plugs Exceeds ISO/IEC 80:00 requirements for transfer impedance, coupling attenuation and shield effectiveness Stranded : IEC 656-6:00 Compliant LS0H Cordage: IEC 60-, IEC 6075, and IEC 60 compliant Universal Wiring Compatible with T568A/B wiring schemes Latch Guard Boots feature a latch guard to protect plug from snagging when pulling through pathways or cable managers Colour Options Variety of colour options available for proper circuit identification Superior Quality Quality plug components ensure long term resistance to corrosion from humidity, extreme temperatures, and airborne contaminants Excellent Bend Relief Boot ensures proper bend relief. MC 5e SCREENED MODULAR CORDS Part # Description MC5S-(XX)M-(XX)L...... Category 5e screened MC, double ended, -pair stranded modular cord, colour matching jacket/boot, T568A/B, LS0H Technical Tip! Factory terminated and tested modular cords are required to achieve consistent category 5e compatibility. Field termination is not recommended and is not compliant with Siemon warranty. Use st (XX) to specify length: 0 = m,.5 =.5m, 0 = m, 0 = m, 05 = 5m, 7.5 = 7.5m Use nd (XX) to specify colour: 0 = black, 0 = white, 0 = red, 0 = grey, 05 = yellow, 06 = blue, 07 = green, 09 = orange Add B to end of part number for bulk project pack of 00 cords. 5.6 W W W. S I E M O N. C O M
PREMIUM 5e -PAIR CABLE INTERNATIONAL COMPLIANCE ISO/IEC 80:00 (Category 5e) ANSI/TIA/EIA-568-B. (Category 5e) IEC 656-5:00 (Category 5e) UL CM UL CMR and CSA FT LS0H: IEC 60-, IEC 6075 and IEC 60 CABLE CONSTRUCTION 0.5mm ( AWG) solid bare copper 7.mm max jacket diameter Shield is an aluminium foil tape enclosing a 0.5mm ( AWG) tinned copper drain wire Part # Description 9A5M-E........... PVC (CM, IEC 60-), Gray Jacket, 05m Reel-in-Box 9A5L-E............ LS0H (IEC 60-), Violet Jacket, 05m Reel-in-Box Other cable lengths also available: Add -5CR for 500m Reel ELECTRICAL SPECIFICATIONS DC Resistance <9.8 Ω/00m DC Resistance Unbalance 5% Mutual Capacitance Capacitance Unbalance 5.6 nf/00m <0 pf/00m Characteristic Impedance -00 MHz: 00 ± 5% (ohms) 00-50 MHz: 00 ± % NVP 69% TCL Delay Skew 0-0 log(f) db 0ns TRANSMISSION PERFORMANCE TIA/EIA & ISO/IEC SIEMON TYPICAL Frequency Insertion Loss NEXT PS NEXT ACR PSACR ACR-F PS ACR-F Return Loss Propagation (MHz) (db) (db) (db) (db) (db) (db) (db) (db) Delay (ns).0..9 65. 79. 6. 7. 6. 77. 60. 70. 6.8 8.8 60.8 78.8 0.0 7.0 570 55.0..7 56. 70. 5. 6. 5. 66.6 9. 59.6 5.8 7.8 8.8 66.8.0.0 55 57 0.0 6.5 5.8 50. 6. 7. 57..8 58.5 0.8 5.5.8 6.8 0.8 58.8 5.0.0 55 50 6.0 8. 7. 7. 6.. 5. 9.0 5.8 6.0 6.8 9.7 60.7 6.7 5.7 5.0.0 5 58 0.0 9. 8. 5.8 59.8.8 5.8 6.5 5.5.5.5 7.8 58.8.8 5.8 5.0.0 5 57.5.7 0.5.9 56.9 9.9 9.9. 6. 8. 9..9 5.9 0.9 8.9.6 0.0 50 55 6.5 7.0 5.0 8. 5. 5. 5.. 7. 8. 0. 7.9 8.9.9.9.5 0.0 59 5 00.0.0 9. 5. 9.... 0.0 0..0.8.8 0.8 8.8 0. 0.0 58 5 60.0* 8.6 5.. 6. 9. 9..7. 0.7. 9.7 0.7 6.7.7 8.7 8.0 57 5 00.0*. 8. 0.8.8 7.8 7.8 -.6 6.7 -.6 9.7 7.8 8.8.8.8 8.0 7.0 56 5 50.0* 6.9. 9.. 6. 6. -7.5.9-0.5.9 5.8 6.8.8 0.8 7. 6.0 56 5 00.0*.0.5 8.. 5. 5. -.8 7.6-5.8 0.6. 5.. 9. 6.8 5.0 56 5 50.0*.9 9. 7.... -7.7.7-0.7-5..9.9 9.9 7.9 6..0 56 5 *Values above industry requirements are for information only PHYSICAL PROPERTIES LS0H Pulling Tension (max) 0N 0N Bend Radius (min) 0mm 0mm Installation Temperature 0 to 60 C 0 to 60 C Storage Temperature -0 to 75 C -0 to 75 C Operating Temperature -0 to 60 C -0 to 60 C CM All performance based on 00 metres. Preparation Tool page.7 W W W. S I E M O N. C O M 5.7