Dual HD input, frame synchronizer, down converter, embedder, CVBS encoder A Synapse product COPYRIGHT 2013 AXON DIGITAL DESIGN BV ALL RIGHTS RESERVED NO PART OF THIS DOCUMENT MAY BE REPRODUCED IN ANY FORM WITHOUT THE PERMISSION OF AXON DIGITAL DESIGN BV.
Block schematic & I/O panel HD/SD-SDI IN-1 HD/SD-SDI IN-2 EQ EQ MANUAL OR AUTOMATIC INPUT SELECTION FRAME SYNC A B C D COLOR CORR. HD-SDI OUT 1+ EDDED AUDIO HD-SDI OUT 2+ EDDED AUDIO GPI IN FRAME SYNC DOWN CONVERTER & COLOR CORRECTION A B C D VI & WSS INSERT PAN- SCAN SDI OUT 1+ (ARC1) EDDED AUDIO SDI OUT 2+ (ARC2) EDDED AUDIO 4-GROUP DE- CVBS ENC COMPOSITE OUT 1 (ARC1) CVBS ENC COMPOSITE OUT 2 (ARC2) PLL µp REFERENCE INPUTS AUDIO INPUTS FROM SYNAPSE BUS 1 2 1 2 3 4 INTERNAL SYNAPSE BUS RACK CONTROLLER BPH05 BHX05 HD/SD-SDI INPUT 1 (OPTIONAL FIBER INPUT) HD/SD-SDI OUTPUT 1 (OPTIONAL FIBER OUTPUT) relay bypass SDI OUTPUT 1 CVBS OUTPUT 1 GPI INPUT/OUTPUT HD/SD-SDI INPUT 2 (OPTIONAL FIBER INPUT) HD/SD-SDI OUTPUT 2 (OPTIONAL FIBER OUTPUT) relay bypass SDI OUTPUT 2 CVBS OUTPUT 2
Features The is a frame synchronizer and 16 channel embedder combined with an ultra high-quality down converter. The dual input capability can be used as an emergency bypass switch. The optimized scaling and filter algorithms ensure crisp broadcast ready pictures from a native HD source, by use of a 64 tap FIR filters. This card is designed as a transmission output module that enables simultaneous feeding of HD, SD (with embedded audio) and dual composite monitoring output transmitters. The ideal companion is the new DIO48 to add 8 audio channels. HD/SD SDI input (auto selecting) Dual input backup function Automatic by input carrier detection Manual by direct control (ACP) GPI 2 Frame synchronizers for the HD and SD domain with individual output timing control 16 channel embedder in both HD and SD domain HD is 16 channel (4 group) transparent in embedder off mode SD is 16 channel (4 group) transparent in embedder off mode (after Frame-sync) Dual HD output Dual SD output (simultaneous anamorphic widescreen and pan-scan) Dual 8 bits composite monitoring output Color correction in both HD and SD domain 1080i or 720p 50 to 625/50 1080i or 720p 59.94 to 525/59.94 1080p or 720p 25 to 625/50 1080p or 720p 29.97 to 525/59.94 1080p or 720p 23.98 to 525/59.94 Built-in ARC for 4:3 pan-scan and 14:9 and 16:9 letterbox output and anamorphic formats SD Safe area marker 4:3 H+V sharpness control in SD domain for crisp down converted picture quality SD coring adjustment WSS, WSS-ext and VI insertion in SD domain I/O Delay measurement for both output domain Reporting of chosen input CRC status information for both inputs Insertion of Copyright bits (assert and restrict) On screen display (OSD) inserter with 9 characters. Displayed static, on input loss or off. Output signal on input loss Freeze Black, Grey or Green Color bar External freeze on GPI closure Locks to Bi-level, Tri-level sync or SDI input Full control and status monitoring through the front panel of the SFR04/SFR08/SFR18 frame and the Ethernet port (ACP) Optional 2 fiber inputs (replacing 2 SDI inputs) or 2 fiber outputs (replacing 2 SDI outputs) on I/O panel Complementary cards: ADL24, DIO48, ADC20, ADC24, DIO24
Conversion abilities The can handle the following conversions: Output CONVERSION 1080p29.97 1080p25 1080p23.97 1035i59.97 1080i59.94 1080i50 720p59.94 720p50 720p29.97 720p25 720p23.98 480i59.94(525) 576i50(625) 1080p29.97 x x 1080p25 x x 1080p23.97 x x 1035i59.97 x x 1080i59.94 x x Input 1080i50 x x 720p59.94 x x 720p50 x x 720p29.97 x x 720p25 x x 720p23.98 x x 480i59.94(525) x 576i50(625) x Applications OB van output card with 16 channel embedding (in combination with 2 x DIO48) 2x1 HD protection switch with SD and CVBS monitoring output Dual domain (HD & SD) production down converter with individual timing adjustment Ordering information Module: : Dual HD input, frame synchronizer, own converter, embedder, CVBS encoder I/O: BPH05_: I/O panel for Relay bypass I/O: BHX05_: I/O panel for with relay bypass Fiber outputs: BPH05T2_FC/PC_: I/O panel for with 2 fiber transmitters on FC/PC BPH05T2_SC_: I/O panel for with 2 fiber transmitters on SC Fiber inputs: BPH05R2_FC/PC_: I/O panel for with 2 fiber receivers on FC/PC BPH05R2_SC_: I/O panel for with 2 fiber receivers on SC
Specifications HD/SD Serial Video Input Equalization Number of inputs HD/SD Serial Video Output DC Offset Rise and Fall Time Overshoot SMPTE 292M (1.5Gb/s), SMPTE 260M, SMPTE 274M, SMPTE 296M, SMPTE 349M 1080i/59.94, 1080i/50, 720p/59.94, 720p/50 Automatic to 100m @ 1.5Gb/s with Belden 1694A or equivalent cable. 2 (auto or manual selection) > 15dB up to 1.5GHz SMPTE 292M (1.5Gb/s), SMPTE 260M, SMPTE 274M, SMPTE 296M, SMPTE 349M 1080i/59.94, 1080i/50, 720p/59.94, 720p/50 800mV nominal 0V ±0.5V 200ps nominal for HD, 750ps nominal for SD < 10% of amplitude > 15dB up to 1.0Gb/s, > 10dB up to 1.5Gb/s SD Serial Video output Number of Outputs 2 800mV nominal DC Offset 0V ±0.5V Rise/Fall Time 800ps nominal Overshoot < 10% of amplitude > 15dB up to 270MHz > 15dB at 270Mb/s Wideband Jitter < 0.2UI Video Delay Minimum of 56 SD lines, maximum 1F +56 lines Analog Video Output PAL (ITU624-4) or NTSC (SMPTE 170M) 8 bits Number of Outputs 2 Connector BNC 1V nominal Impedance 75 Ohms > 35dB to 10MHz Frequency Response 0.5dB to 4.5 MHz Differential Gain < 0.6% Differential Phase < 0.7 SNR > 75dB Reference Input through RRC Number of Inputs Tri-level Bi-level 2 on SFR18, 2 on SFR08 and 1 on SFR04 SMPTE274M, SMPTE296M 600 mvp-p nominal, 75 Ohms terminated through loop PAL Black Burst ITU624-4/SMPTE318, Composite NTSC SMPTE 170M 1Vp-p nominal, 75 Ohms terminated through loop Miscellaneous Weight Approx. 250g Operating Temperature 0 C to +50 C Dimensions 137 x 296 x 20 mm (HxWxD) Electrical Voltage +24V to +30V Power <11 Watts