with Flush Process Connection piezoresistive pressure sensor up to independent contacts, configurable optional: analogue output Exprotection (for wire) cooling element up to 00 C nominal pressure ranges from 0... 00 mbar up to 0... 0 bar Description The electronic pressure switch is the successful combination of intelligent pressure switch digital display and is suitable for the usage with viscous and pasty media which are compatible with stainless steel. (6L) and the sealing material. The has a flush diaphragm and can be delivered with inch thread, as well as with different process connections like clamp or dairy pipe. For use with higher media temperature the can optionally be supplied with a cooling element. Operation The rotatable display module shows the system pressure and allows programming. The configuration is menu controlled and easy to handle without previous knowledge. Applications foodstuff industry pharmacy chemical industry Characteristics indication of measured values on a digit LED display rotatable and configurable display module configurable contacts (switch on / switch off points, hysteresis / window mode, switch on / switch off delay) option analogue output:... 0 ma / wire Exprotection optionally... 0 ma / wire with turndown : 0... 0 V / wire special functions (access protection, min. / max. value memory) industrial standard in view of accuracy, thermal behaviour and long term stability
Input pressure range Nominal pressure gauge [bar]... 0 0. 0.6 0. 0. 0.6.6. 6 0 6 0 Nominal pressure abs. [bar] 0.6.6. 6 0 6 0 Level [bar] 6 6 0 0 60 60 60 00 Standard PNP contact Options independent PNP contacts independent PNP contacts (possible with Mx, 8pin for... 0 ma/wire; 0... 0 V/wire on request) Max. switching current... 0 ma / and wire: contact rating ma, shortcircuit resistant; V Switch = V S V 0... 0 V / wire: contact rating 00 ma, shortcircuit resistant Accuracy of contacts IEC 600 BFSL Repeatability Switching frequency Switching cycles > 00 x 0 6 Delay time 0... 00 s standard: nominal pressure > 0. bar: nominal pressure 0. bar: option: nominal pressure > 0. bar: ± 0. % FSO max. 0 Hz ± 0. % FSO ± 0.0 % FSO ± 0. % FSO max. contact for wire current signal with plug ISO 00 as well as wire current signal with Exprotection no contact possible with wire voltage signal with plug ISO 00 ± 0. % FSO ± 0.0 % FSO ± 0. % FSO Analogue output (optionally) / Supply wire current signal... 0 ma / V S = 8... V DC = [(V S V S min ) / 0.0] Ω response time: < 0 ms wire current signal with Exprotection... 0 ma / V S =... 8 V DC = [(V S V S min ) / 0.0] Ω response time: < 0 ms wire current signal... 0 ma / V S = 9... 0 V DC adjustable (turndown of span :) = 00 Ω response time: < s wire voltage signal 0 0 V / V S =... 6 V DC permissible load: R min = 0 kω response time: < 0 ms Without analogue output V S =... 6 V DC Accuracy IEC 600 BFSL standard: nominal pressure > 0. bar: nominal pressure 0. bar: ± 0. % FSO ± 0.0 % FSO ± 0. % FSO ± 0.0 % FSO option: nominal pressure > 0. bar: ± 0. % FSO ± 0. % FSO with turndown of span the analogue signal is adjusted automatically to the new measuring range accuracy according to IEC 600 limit point adjustment (nonlinearity, hysteresis, repeatability) Thermal errors (offset and span) / Permissible temperatures Nominal pressure P N [bar]... 0 0. 0. 0. > Tolerance band [% FSO] ± 0. ± ±. ± ± ± 0. TC, average [% FSO / 0 K] ± 0. ± 0. ± 0. ± 0. ± 0. ± 0. in compensated range [ C] 0... 0 0... 0 0... 0 Permissible temperatures medium:... C electronics / environment:... 8 C storage: 0... 8 C an optional cooling element can influence thermal effects for offset and span depending on installation position and filling conditions for vacuum ranges and nominal pressure abs. the max. medium temperature is 0 C; with optional cooling element its maximum permissible temperature is valid Electrical protection Shortcircuit protection permanent Reverse polarity protection no damage, but also no function Electromagnetic compatibility emission and immunity according to EN 66 Mechanical stability Vibration g RMS (0... 000 Hz) Shock 00 g / msec Filling fluids Standard silicon oil Optional food compatible oil (with FDA approval) / Halocarbon and others on request Materials Pressure port stainless steel. (6L) Housing stainless steel.0 (0) Display housing PA 6.6, Polycarbonate Seals (media wetted) inch thread: standard: FKM (recommended for medium temperatures 00 C) optionally: FFKM (recommended for medium temperatures > 00 C) others on request clamp and dairy pipe: without Diaphragm stainless steel. (6L) Media wetted parts pressure port, seals, diaphragm pressure measurement
Explosion protection (for wire current signal with Exprotection) Approval AX zone (0) : II () G Ex ia IIC T Safety technical maximum values U i = 8 V, I i = 9 ma, P i = 660 mw Max. switching current 6 0 ma (max. permissible inductivity:. mh) Permissible temperatures for environment 0... 0 C Connecting cables (by factory) cable capacitance: signal line/shield also signal line/signal line: 60 pf/m cable inductance: signal line/shield also signal line/signal line: µh/m 6 the real switching current in the application depends on the power supply unit Miscellaneous Display digit, red segmentled display, digit height mm, range of indication 999... +9999; accuracy 0. % ± digit; digital damping 0. 0 sec (programmable); measured value update 0.0 0 sec (programmable) Current consumption (without contacts) Ingress protection IP 6 Installation position any Weight approx. 60... 0 g Operational life > 00 x 0 6 cycles wire signal output current: max. ma wire signal output current: approx. ma + signal current wire signal output voltage: approx. ma Pressure switches are calibrated in a vertical position with the pressure connection down. If this position is changed on installation there can be slight deviation in the zero point for pressure ranges bar. Therefore installation position has to be given in this case. Wiring diagrams wiresystem (current) p wiresystem (current / voltage) p U B A U B Signal + A/V I Contact I/U Contact Contact Contact Pin configuration Electrical connection Signal + (only wire) Contact Contact Contact Ground Mx plastic (pin) via pressure port Mx metal (pin) plug housing / pressure port Mx plastic (8pin) 6 via pressure port ISO 00 ground contact cable colours (DIN 00) white brown green grey pink yellow / green (shield) Electrical connections (dimensions in mm) Mx (pin) Mx (8pin) ISO 00 cable gland 8 8 different cable types and lengths available; standard: m PVC cable (without ventilation tube)
Mechanical connections (dimensions in mm) Inch thread (DIN 8) Clamp (ISO 8) flush diaphragm 8 flush diaphragm DN ": DN /": DN or DN / flush diaphragm DN G flush Dairy pipe (DIN 8) flush diaphragm D dimensions in mm size DN DN 0 DN 0 A 0 89 89 B C 6 68, D Cooling element 6, Exprotection: total length increases by 0 mm! A temperature range 0 C 00 C size A number of cooling fins This data sheet contains product specification; properties are not guaranteed. Subject to change without notice. SAP06_E_0008
Ordering code DS 00P DS 00P Pressure gauge 8 absolute, 8 6 Input [bar] 0,0 0 0 0 0,6 6 0 0 0, 0 0 0,0 0 0 0 0,60 6 0 0 0,0 0 0,6 6 0, 0,0 0 0 6,0 6 0 0 0 0 0 6 6 0 0 0 0 0 0 X 0 9 9 9 Analogue output without 0 ma / wire 0 0 V / wire 0 ma / wire, adjustable 0 Intrinsic safety 0 ma / wire E Contact contact, contacts, contacts Accuracy standard for P N > 0, bar 0, % standard for P N 0, bar 0, % option for P N > 0, bar 0, % Electrical connection Mx (pin) / plastic version N 0 0 Mx (8pin) / plastic version Mx (pin) / metal version M 0 N 0 Male and female plug ISO 00 0 0 Cable gland incl. cable 6 0 0 9 9 Mechanical connection G" with flush welded diaphragm (DIN 8) Clamp " (ISO 8) Clamp /" (ISO 8) Clamp " (ISO 8) Z C 6 C 6 C 6 Dairy pipe DN (DIN 8) M Dairy pipe DN 0 (DIN 8) M Dairy pipe DN 0 (DIN 8) M 6 9 9 Diaphragm Stainless steel. (6L) Seals for clamp or dairy pipe: keine 0 for inch thread: FKM FFKM on request Filling Fluids Silicon oil food compatible oil 8 Halocarbon C on request Special version standard with cooling element up to 0 C with cooling element up to 00 C 0 0 0 0 0 0 9 9 nominal pressure absolute not possible for P N < 0.6 bar for vacuum and nominal pressure abs. the max. medium temperature is 0 C with Ex version max. contact is possible with connector ISO 00 and output wire version only max. contact possible; with wire version no contact possible contacts and Mx, 8pin only possible in combination and together with... 0 ma/wire; 0... 0 V/wire on request 6 different cable types and lengths deliverable, standard: m PVC cable without ventilation tube, optionally cable with ventilation tube The cup nut for dairy pipe has to be mounted by production of pressure transmitter. The cup nut for dairy pipe has to be ordered as separate position. 8 Name of oil: Mobil DTE FM ; Category Code: H; NSF Registration No.: 066 0008 This ordering code contains product specification; properties are not guaranteed. Subject to change without notice.