MULTI-PURPOSE LCD DISPLAY MU-120C

MULTI-PURPOSE LCD DISPLAY MU-120C

SAFETY INSTRUCTIONS Safety Instructons for the Operator Safety Instructons for the Installer WARNING WARNING Do not open the equpment. Do not open the cover unless totally famlar wth electrcal crcuts and servce manual. Only qualfed personnel should work nsde the equpment. Improper handlng can result n electrcal shock. Do not dsassemble or modfy the equpment. Turn off the power at the swtchboard before begnnng the nstallaton. Fre, electrcal shock or serous njury can result. Use the proper fuse and power cable. Fre or electrcal shock can result f the power s left on. Fuse ratng s shown on the equpment. Use of a wrong fuse can result n damage to the equpment. Do not nstall the equpment where t may get wet from ran or water splash. Water n the equpment can result n fre, electrcal shock or damage to the equpment. Immedately turn off the power at the swtchboard f the equpment s emttng smoke or fre. Contnued use of the equpment can cause fre or electrcal shock. Contact a FURUNO agent for servce. CAUTION Observe the followng compass safe dstances to prevent nterference to a magnetc compass: CAUTION Standard compass Do not connect/dsconnect the sgnal cable whle turnng the power on. The unt may be damaged. A warnng label s attached to the equpment. Do not remove the label. If the label s mssng or damaged, contact a FURUNO agent or dealer. WARNING To avod electrcal shock, do not remove cover. No user-servceable parts nsde. Steerng compass LCD Montor MU-120C 0.75 m 0.5 m Remote Controler RMC-200 0.3 m 0.3 m When lftng the dsplay unt, hold t together wth the cover. Graspng by the cover alone may allow the dsplay unt to fall, resultng n possble bodly njury or damage to the equpment. Name: Warnng Label (2) Type: 03-129-1001 Code No.: 100-236-741

TABLE OF CONTENTS FOREWARD... SYSTEM CONFIGURATION... v EQUIPMENT LISTS... v 1. MOUNTING... 1 1.1 Dsplay Unt... 1 1.2 Remote Controller... 4 2. WIRING... 5 3. ADJUSTMENTS... 7 3.1 RGB/ Settng... 7 3.2 VIDEO Settng... 9 3.3 Menu Wndow Settng... 10 3.4 Remote Controller Settng... 12 4. OPERATION... 13 4.1 Controls... 13 4.2 Adjustng Dsplay Brllance... 15 4.3 Choosng Source for Man Pcture... 16 4.4 Choosng Source for Pcture-n-Pcture... 17 5. MAINTENANCE, TROUBLESHOOTING... 18 5.1 Mantenance... 18 5.2 Troubleshootng... 19 5.3 Clearng the Memory... 20 SPECIFICATIONS... SP-1 PACKING LISTS... A-1 OUTLINE DRAWINGS... D-1 INTERCONNECTION DIAGRAM...S-1

FOREWORD A Word to the Owner of the MU-120C FURUNO Electrc Company thanks you for purchasng the MU-120C 12.1 Mult-Purpose LCD Dsplay. We are confdent you wll dscover why the FURUNO name has become synonymous wth qualty and relablty. For over 50 years FURUNO Electrc Company has enjoyed an envable reputaton for qualty and relablty throughout the world. Ths dedcaton to excellence s furthered by our extensve global network of agents and dealers. Your equpment s desgned and constructed to meet the rgorous demands of the marne envronment. However, no machne can perform ts ntended functon unless properly nstalled and mantaned. Please carefully read and follow the operaton, nstallaton and mantenance procedures set forth n ths manual. We would apprecate feedback from you, the end-user, about whether we are achevng our purposes. Thank you for consderng and purchasng FURUNO. Features Man or remote dsplay for radars, vdeo sounders, sonars, plotter. Compatble equpment: FAR-21X7 seres, MODEL1833C/1833C-BB seres (NavNet), FCV-1200L, CH-250, CH-270, CSH-5L/8L, GD/GP-280/380/680, etc. Hgh resoluton dsplay of 800 x 600dot (SVGA) Brghtness of 1,000 cd/m2 (maxmum) and 5 cd/m2 (mnmum) for comfortable vewng day and nght Landscape orentaton Wde vewng angle for observaton by more than one person Pcture-n-pcture functon

SYSTEM CONFIGURATION RGB Radar, Vdeo Plotter, Navgator, Vdeo Sounder, Scannng Sonar, etc. 12-24 VDC FAR-2107 seres etc. VIDEO (NTSC/PAL) CCD camera, Vdeo recorder, etc. Connectable equpment Equpment Resoluton Sgnal FR-1510 MK3 seres XGA Analog FCV-1200L* VGA Analog, va IF8000 GD/GP-280/380/680 VGA Analog CH-250 VGA Analog, va IF8000 CH-270 VGA Analog, va IF8000 CSH-5L/8L XGA Analog FSV-24/24S/30/30S SXGA Analog FR-21X5 seres SXGA Analog FAR-21X7 seres SXGA FEA-2107 SXGA MODEL 1833C seres VGA Analog MODEL 1833C-BB seres VGA Analog *= Not avalable for the portrat type. Note: The resoluton of MU-120C s SVGA. VGA, XGA and SXGA sgnal may not be sharp n character or scan lne. About the TFT LCD The TFT LCD s constructed usng the latest LCD technques, and dsplays 99.99% of ts pxels. The remanng 0.01% of the pxels may drop out or blnk, however ths s not an ndcaton of malfuncton. v

EQUIPMENT LISTS Standard supply Name Type Code No. Qty Dsplay Unt MU-120C 1 Remote Controller RMC-200 1 Spare Parts* SP19-00101 001-403-170 1 set Installaton Materals* CP19-00100 000-012-630 1 set Accessores* FP19-00601 001-403-200 1 set Remarks w/lcd cover Power cable Opton Name Hanger Cable Assy Type FP19-00700 3COX-2P-6C -D/D SINGLELINK5M Code No. Qty Remarks 001-403-240 1 w/knob, self-tappng screws 000-146-500 1 Cable length: 5 m 000-146-501 1 Cable length: 10 m 000-149-054 1 Cable length: 5 m * = See packng lst at end of manual. v

v

1 MOUNTING Refer to the outlne drawng at the end of the manual for mountng dmensons. Note: A grass plate covers the LCD. For ths reason, handle the unt carefully. 1.1 Dsplay Unt The dsplay unt may be mounted on a desktop (optonal hanger requred) or flush mounted n a panel. When selectng a mountng locaton, keep n mnd the followng ponts: Locate the unt out of drect sunlght. Select a locaton where the dsplay can be easly vewed and the controls can be easly operated. Leave suffcent space around the unt for servcng and mantenance. See the outlne drawng for mnmum servcng space. The unt weghs 5.4 kg (flush mountng)/6.3 kg (desktop mountng). Be sure the mountng locaton s strong enough to support the weght of the unt. Locate the unt away from areas subject to water splash and ran. 1

Flush mountng See the outlne drawng at the end of the manual for mountng dmensons. CAUTION Hold the cover and dsplay unt together when lftng the dsplay unt. The dsplay unt may fall out f only the cover s held. 1. Remove the LCD cover from the unt. 2. Usng the paper template suppled n the nstallaton materals, make a cutout n the mountng locaton. 3. Insert the dsplay unt to the cutout, and fasten the dsplay unt to the mountng locaton wth four self-tappng screws (5X30, suppled as accessores). Note: Hex head bolts may also be used to fasten the dsplay unt. However, ther lengths must be at least 30 mm. 110 30 Waterproofng: IP20 Cosmetc cap Waterproofng: IPX5 Mountng dmensons 4. Attach the cosmetc caps (suppled as accessores) to the dsplay unt at the locatons shown n the drawng above. 2

Desktop mountng The dsplay unt can be mounted on a desktop, usng the optonal hanger, Type: FP19-00700, Code No.: 001-403-240. Contents of hanger mountng kt Name Hanger Knob bolt Self-tappng screw Type FP19-00701 FP03-09204 5x20 Code No. 001-403-250 008-523-650 000-802-081 Qty 1 2 4 1. Fasten the hanger to the mountng locaton wth four self-tappng screws (suppled). 2. Screw knob bolts n hanger, set unt to hanger, and tghten knob bolts. 3. Attach hard cover to protect the LCD. Knob bolt Hanger Desktop mountng 3

1.2 Remote Controller Wrte the devce name (ex. FCV-1200L ) for each sgnal key on the stcker suppled wth the remote controller. Attach the stcker to the remote controller, at the locaton shown below. RGB2 VIDEO1 VIDEO2 VIDEO3 PIP1 PIP2 PIP3 + MENU BRILL RGB 1 : RGB2 : : VIDEO1: VIDEO2: VIDEO3: Stcker Remote controller RMC-200 WARNING Ensure battery polarty s correct. Wrong polarty may cause the batteres to explode. 4

2 WIRING Connect external equpment to the MU-120C by referrng to the drawngs below, the table on the next page and the nterconnecton dagram at the back of ths manual. Ground termnal 12-24VDC 12-24 DVC MJ-A3SPF0025-035 (Suppled) VIDEO1 VIDEO2 FAR-21X7 seres FEA-2107 -D VIDEO3 -D/D SINGLELINK5M (Opton) 2.5C2V or 3C2V (Local supply) RGB2 3COX-2P-6C (Opton) Dsplay unt, rear vew 5 CCD camera, Vdeo recorder, etc. FCV-1200L seres CH-250/S CSH-5L/8L FSV-24/24S/30/30S GP/GD-280/380/680 FR-1510 MARK-3 seres FR-21X7 seres MODEL1833C seres MODEL1833C-BB seres

Port, cable and connectable equpment Used cable Port Name 12-24 VDC -D VIDEO1 Standard/ Opton Connectable Equpment 000-149-147 Standard Power source 000-149-054 Opton 3COX-2P-6C 5M 000-146-500 Opton 3COX-2P-6C 10M 000-146-501 Opton Type Power cable Cable MJ-A3SPF002535 -D/D SINGLELINK5M Analog RGB Cable RGB2 Code No. Name PC, FAR-21X7 seres, FEA-2107 FCV-1200L, CH-250, CH-270, CSH-5L/8L, FSV-24/24S/30/30S, GD-280/380/680, FR1510Mk-3, FR-21X5 seres, Model 1833C seres, Model 1833C-BB seres Prepare the followng cable locally. Connector type: RCA (metal), both ends Cable length: shorter than 10 m 2.5C2V or 3C2V (Japan Industral Standard, or the equvalent) coaxal cable (Impedance: 75 Ω) Cable 3C2V Insulator VIDEO2 Vdeo cassette recorder, CCD camera, DVD player Sheld Vnyl sheath VIDEO3 Conductor 2 S = 0.19 mm = 0.5 mm Groundng Fasten the ground wre (local supply) between the ground termnal on the dsplay unt and the shp s superstructure. The length should be as short as possble. ) to make the ground connecton at the dsplay unt. Do Note: Use a closed-type lug ( not use an open-type lug ( ). 6

3 ADJUSTMENTS Adjust the MU-120C accordng to the equpment connected. Note that you can adjust the dsplay currently selected, at the DISP selecton wndow. (See secton 4.3.) 3.1 RGB/ Settng and RGB2 screens can be adjusted ndependently. Also, screen can be adjusted smlarly. 1. Press the [MENU] key to show the man menu. The man menu s erased automatcally wth no operaton for one mnute. 2. Press the [ ] or [ ] key to select, RGB2 or as approprate. RGB2 H_SIZE V_SIZE PHASE CONTRAST H_POSITION V_POSITION R_LEVEL G_LEVEL B_LEVEL TEMPERATURE B STRETCH W STRETCH DISP MODE SHARPNESS VIDEO1 VIDE02 VIDE03 OSD SYSTEM 640 480 16 (1-32) 44 (1 64) 50 (1 99) 25 (1 40) 31 (1 64) 31 (1 64) 31 (1 64) 7000K (5500K/6500K/7000K/8000K) OFF (OFF, 1 10) OFF (OFF, 1 10) FULL (FULL/EVEN/NORMAL) 5 (1 10) (RGB2) settng menu RGB2 CONTRAST H_POSITION V_POSITION R_LEVEL G_LEVEL B_LEVEL TEMPERATURE B STRETCH W STRETCH DISP MODE SHARPNESS VIDEO1 VIDE02 VIDE03 44 (1 64) 25 (1 50) 25 (1 50) 31 (1 64) 31 (1 64) 31 (1 64) 7000K (5500K/6500K/7000K/8000K) OFF (OFF, 1 10) OFF (OFF, 1 10) FULL (FULL/EVEN/NORMAL) 5 (1 10) settng menu 3. Press the [ ] or [ ] key to select the tem to adjust. 4. Press the [ ] or [ ] key to adjust. 7 OSD SYSTEM

Menu tem H_SIZE*** V_SIZE*** PHASE CONTRAST H_POSITION V_POSITION R_LEVEL G_LEVEL B_LEVEL TEMPERATURE B STRETCH W STRETCH Functon Settng range Varable dependng on Adjusts the mage sze horzontally. sgnal type Adjusts the mage sze vertcally. Adjusts the characters and graphc lnes. 1-32 Increases or decrease contrast level. 1-64 Moves the mage poston horzontally. 1-50 (), 1-99 (, 2) Moves the mage poston vertcally. 1-40 Adjusts red color level. 1-64 Adjusts green color level. 1-64 Adjusts blue color level. 1-64 Adjusts color temperature. 5500K/6500K/7000K/8000K* Reduces nose on black color. OFF, 1-10 Emphaszes whte color. OFF, 1-10 Selects the sgnal resoluton. FULL: Shows the nput sgnal on entre screen. DISP MODE EVEN: Shows the nput sgnal wth orgnal sze. FULL/EVEN/NORMAL** NORMAL: Shows the nput sgnal wth same aspect rato. SHARPNESS Sharpens the edge horzontally. 1-10 *: Warm color 5500K, 6500K, 7000K, 8000K Cold color **: Select NORMAL to use the SXGA sgnal from a radar or scannng sonar. Note that both left and rght edges may be n black. For VGA and XGA sgnals, FULL and NORMAL are avalable. ***: Adjust H_SIZE and V_SIZE properly. Otherwse, unwanted mage may appear outsde of the dsplay area. Note: When the characters are not clear, adjust PHASE and SHARPNESS. 8

3.2 VIDEO Settng VIDEO1, VIDEO2 and VIDEO3 screens; that s, the pcture-n-pcture wndows can be adjusted as below. 1. Press the [MENU] key to show the menu. 2. Press [ ] or [ ] to select VIDEO1, VIDEO2 or VIDEO3 as approprate. RGB2 PIP_SIZE CONTRAST R_LEVEL G_LEVEL B_LEVEL TEMPERATURE B STRETCH W STRETCH VIDEO1 VIDE02 VIDE03 OSD SYSTEM 5 (1 10) 44 (1 64) 31 (1-64) 31 (1-64) 31 (1 64) 7000K (5500K/6500K/7000K/8000K) OFF (OFF, 1 10) OFF (OFF, 1 10) VIDEO1 (2 or 3) settng menu 3. Press the [ ] or [ ] key to select the tem to adjust. 4. Press the [ ] or [ ] key to set. Menu tem Functon PIP_SIZE Adjusts the sze of pcture-n-pcture wndow. CONTRAST R_LEVEL G_LEVEL B_LEVEL TEMPERATURE B STRETCH W STRETCH Increases or decrease contrast level. Adjusts red color level. Adjusts green color level. Adjusts blue color level. Adjusts color temperature. Reduces nose on black color. Emphaszes whte color. Pcture-n-pcture wndow Pcture-n-pcture wndow 9 Avalable range 1(25 mmx18mm) 10 (160 mmx129mm) 1-64 1-64 1-64 1-64 5500K/6500K/7000K/8000K OFF, 1-10 OFF, 1-10

3.3 Menu Wndow Settng 3.3.1 Adjustng the menu wndow The menu wndow can be moved and translucentzed on the OSD (On Screen Dsplay) menu. 1. Press the [MENU] key to show the menu. 2. Press the [ ] or [ ] key to select OSD. RGB2 H_POSITION V_POSITION TRANSLUCENT VIDEO1 VIDE02 VIDE03 OSD SYSTEM 12 (1 22) 23 (1 23) OFF (OFF/ON) CUSTOM NAME = RGB2 = RGB2 = VIDEO1 = VIDEO1 VIDEO2 = VIDEO2 VIDEO3 = VIDEO3 OSD menu 3. Press [ ] or [ ] to select the menu tem you want to adjust. 4. Press [ ] or [ ] to adjust. Menu tem H_POSITION V_POSITION TRANSLUCENT CUSTOM NAME Functon Moves the menu wndow horzontally. Moves the menu wndow vertcally. Translucentzes the menu wndow. See the next secton. 10 Avalable range 1-22 (1: left, 22: rght) 1-23 (1: up, 23: down) Off, On

3.3.2 Changng the sgnal name You can change the sgnal name whch s shown on the DISP or PIP menu, descrbed n the next chapter. It s useful to use the name of the devce connected (ex. FCV-1200L ). For detaled nformaton about these menus, see Chapter 4. 1. Press the [MENU] key to show the man menu. 2. Press the [ ] key to choose the OSD menu. RGB2 VIDEO1 H_POSITION V_POSITION TRANSLUCENT VIDE02 VIDE03 OSD 25 (1-50) 21 (1-50) OFF (ON/OFF) CUSTOM NAME = RGB2 = RGB2 = VIDEO1 = VIDEO1 VIDEO2 = VIDEO2 VIDEO3 = VIDEO3 OSD menu 3. Press the [ ] or [ ] key to select the sgnal to change ts name n CUSTOM NAME area. In the example above, s chosen. 4. Press the [ ] key to select the character you want to change. In the example below, G s selected. CUSTOM NAME = = RGB2 = RGB2 = = = 5. Press the [ ] or [ ] key to select approprate alphanumerc character. In the example below, 5 s selected. CUSTOM NAME = R5B1 = RGB2 = RGB2 = = = 6. To change another sgnal name, press [ ] and then press [ ] or [ ] to select t. 11

3.4 Remote Controller Settng A remote controller can be set to be operatve wth a specfc dsplay unt, n the case of multple MU-120C dsplay unts. Set the remote controller mode desred on the SYSTEM menu as follows; 1. Press the [MENU] key to show the man menu. 2. Press the [ ] key to select SYSTEM. Dsplay unt ID RGB2 PVI VIDEO1 INFRARED REMOTE DEFAULT RESET VIDEO2 Remote controller ID square VIDEO3 OSD A NO INFORMATION : RESOLUTION: 1280x1024 fh: 80KHZ fv: 75HZ RGB2 : RESOLUTION: 640x480 fh: 31KHZ fv: 60HZ : NO SIGNAL VIDEO1: NTSC VIDEO2: PAL VIDEO3: NO SIGNAL PROGRAM NO.:********** SYSTEM menu 3. Select INFRARED REMOTE. 4. Pont the remote controller toward the dsplay unt, and press any key on the remote controller. The current settng of remote controller s shown nsde the remote controller settng square. 5. Press the [RGB2] and [BRILL +] keys together on the remote controller to change the remote controller ID among A, B, C and D. Your selecton appears nsde the square. 6. Press the [ ] or [ ] key so that the dsplay unt ID s the same as the remote controller ID n the square. 7. Press the [MENU] key to close the menu. 12

4 OPERATION 4.1 Controls Dsplay unt MENU key Shows the man menu. DISP key Shows the DISPLAY selecton wndow. Power key Turns the power on/off. LED Optcal sensor Arrow keys Selects menu tem. PIP key Shows the PIP selecton wndow. BRILL key Shows the BRILL adjustment wndow. Dsplay unt Power key: Press the power key ( ) to turn the power on or off. LED: The LED changes color accordng to sgnal status as below. Green: The selected sgnal to be dsplayed s nput correctly from the external devce. Orange: The selected sgnal to be dsplayed s not nput from the external devce for fve seconds. 13

Remote controller RGB2 VIDEO1 VIDEO2 VIDEO3 PIP1 PIP2 PIP3 + MENU BRILL Remote controller Key name Functon * Shows the sgnal. RGB2* Shows the RGB2 sgnal. Shows the sgnal. VIDEO1** Shows the VIDEO1 sgnal on the entre screen. VIDEO2** Shows the VIDEO2 sgnal on the entre screen. VIDEO3** Shows the VIDEO3 sgnal on the entre screen. PIP1*** Shows the VIDEO1 sgnal n the pcture-n-pcture wndow. PIP2*** Shows the VIDEO2 n the pcture-n-pcture wndow. PIP3*** Shows the VIDEO3 n the pcture-n-pcture wndow. BRILL (+) Increases the dsplay brllance. BRILL (-) Decreases the dsplay brllance. MENU Shows the man menu. Arrow keys Selects the menu tems. *: When a pcture-n pcture wndow s shown, t remans on the (2). **: When the prevous selecton s PIP1, 2 or 3, t s erased by pressng these keys. ***: When the prevous selecton s VIDEO1, 2 or 3, these keys are not avalable. For PIP (pcture-n-pcture), see 3.2 VIDEO Settng. 14

4.2 Adjustng Dsplay Brllance The dsplay brllance can be adjusted as follows. 1. Press the [BRILL] key on the dsplay unt to show the BRILL adjustment wndow. BRILL 50 BRILL wndow 3. Press the [ ] or [ ] key to adjust the brllance. (Settng range: 1 to 50) You can also adjust brllance by pressng the [BRILL] key. 4. Press the [ ] or [ ] key to close the wndow. The wndow s erased when there s no operaton wthn fve seconds. Note: Avod excessvely low brllance to prevent dsplay rregulartes. 15

4.3 Choosng Source for Man Pcture Choose the sgnal to dsplay on the entre screen as follows: 1. Press the [DISP] key to show the DISP selecton wndow. Sgnal names can be changed. For detal, see 3.3.1 Changng the sgnal name. RGB2 VIDEO1 VIDEO2 VIDEO3 DISP selecton wndow (default settng) 2. Press the [ ] or [ ] key to select a sgnal. You can also select the sgnal by pressng the [DISP] key contnuously. -2: The sgnal from the chosen RGB port s dsplayed on the entre screen. : The sgnal from the port s dsplayed on the entre screen. VIDEO1-3: The external vdeo from the approprate VIDEO port s dsplayed on the entre screen. 3. Press the [ ] or [ ] key to close the wndow. The wndow s erased when there s no operaton wthn fve seconds. Note: The name of the selected sgnal appears at the rght top corner for fve seconds after the DISP menu s erased. 16

4.4 Choosng Source for Pcture-n Pcture Choose the source for the pcture-n-pcture wndow as follows: Note: The sze of the pcture-n-pcture wndow can be adjusted on the VIDEO1, 2 and 3 menus. For detals, see secton 3.2. 1. Wth the, RGB2 or dsplay shown, press the [PIP] key. The PIP selecton wndow appears. Sgnal names can be changed. For detal, see 3.3.1 Changng the sgnal name. VIDEO1 VIDEO2 VIDEO3 OFF PIP wndow (default settng) 2. Press the [ ] or [ ] key to select the VIDEO port desred. VIDEO can be also selected by pressng the [PIP] key contnuously. To turn off the pcture-n-pcture wndow, choose OFF. 3. Press the [ ] or [ ] key to close the wndow. Note: The pcture-n-pcture wndow can be moved by pressng the arrow keys when a menu wndow s erased. 17

5 MAINTENANCE, TROUBLESHOOTING WARNING ELECTRICAL SHOCK HAZARD Do not open the equpment. Only qualfed personnel should work nsde the equpment. 5.1 Mantenance Routne mantenance Regular mantenance s mportant for good performance. Check the followng on a regular bass to keep the equpment n good operatng condton. Check that the connectors at the rear of the dsplay unt are tghtly fastened. Check the ground wre and ground termnal for rust. Clean f necessary. Confrm that the ground wre s tghtly fastened. Remove dust and drt from the dsplay unt and LCD wth a dry, soft cloth. Do not use chemcal cleaners to clean any part of the dsplay unt they can remove pant and markngs. Wpe the LCD carefully to prevent scratchng, usng tssue paper and an LCD cleaner. To remove drt or salt deposts, use an LCD cleaner, wpng slowly wth tssue paper so as to dssolve the drt or salt. Change paper frequently so the salt or drt wll not scratch the LCD. Do not use solvents such as thnner, acetone or benzene for cleanng. Fuse replacement The 7 A fuse n the power cable protects the equpment from nternal fault and overcurrent. If the fuse blows, fnd the cause before replacng t. If the fuse blows agan after replacement, request servce. WARNING Use the proper fuse. Use of a wrong fuse can cause fre or damage to the equpment. 18

Battery replacement The remote controller has two AA batteres. If the dstance from whch the remote controller can be operated has decreased, change the battery. Note: Replace all batteres together. Do not mx old and new batteres. WARNING Ensure battery polarty s correct. Wrong polarty may cause the batteres to explode. 5.2 Troubleshootng The table below provdes troubleshootng procedures to use when no pcture appears. If you cannot restore the pcture, do not attempt to check nsde the equpment there are no user servceable parts nsde. Refer any work to a qualfed techncan. Troubleshootng table Reason for no pcture Remedy Shp s battery voltage too hgh Check battery voltage. Fuse has blown. Replace fuse. Cable between MU-120C and external equpment has loosened. Refasten cable. Power cable has loosened. Refasten cable. You can confrm whch sgnals are currently nput n the SYSTEM menu. RGB2 VIDEO1 VIDEO2 VIDEO3 OSD INFRARED REMOTE A DEFAULT RESET NO INFORMATION : RESOLUTION:1280x1024 fh: 80KHZ fh: 75HZ RGB2 : RESOLUTION: 640x480 fh: 31KHZ fv: 60HZ : NO SIGNAL VIDEO1 : NTSC VIDEO2 : PAL VIDEO3 : NO SIGNAL PROGRAM NO.:*************** SYSTEM menu 19

5.3 Clearng the Memory You may want to clear the memory to start afresh wth default settngs. You can do ths as follows: 1. 2. 3. 4. Press the [MENU] key to show the man menu. Press the [ ] keys to open the SYSTEM menu. Select DEFAULT RESET by arrow keys. Press the [ ] key to select YES. RGB2 VIDEO1 VIDEO2 VIDEO3 OSD INFRARED REMOTE A DEFAULT RESET YES All custom Settngs wll be lost. key: cancel key: reset INFORMATION : RESOLUTION: 1280x1024 fh: 80KHZ fv: 75HZ RGB2 : RESOLUTION: 640x480 fh: 31KHZ fv: 60HZ : NO SIGNAL VIDEO1 : NTSC VIDEO2 : PAL VIDEO3 : NO SIGNAL PROGRAM NO.: **************** SYSTEM menu 5. Press the [ ] key agan to select reset. 20

FURUNO MU-120C SPECIFICATIONS OF MULTI-PURPOSE LCD DISPLAY MU-120C 1 GENERAL 1.1 Dsplay 12.1 nch SVGA color TFT-LCD, 246 x 185 mm 1.2 Brghtness 1,000 cd/m2 maxmum, 5 cd/m2 mnmum 1.3 Resoluton 800 x 600 (SVGA) 1.4 Vewng Angle left/rght: 70, up: 60, down: 50 1.4.1 RGB ports: VESA (VGA, XGA, SVGA, SXGA) Input Sgnal (0.7 Vp-p, Synchronzaton: TTL level) port: VESA (VGA, XGA, SVGA, SXGA) VIDEO ports: NTSC/PAL 2 POWER SUPPLY 2.1 Rated Voltage 12-24 VDC: 4.0-2.0 A 3 ENVIRONMENTAL CONDITION 3.1 Ambent Temperature Dsplay unt: -15 C to +55 C, Remote controller: +5 C to +35 C 3.2 Relatve Humdty 93% at 40 C 3.3 Waterproofng Dsplay unt (Front panel): IPX5, Dsplay unt (Rear panel): IP20, Remote controller: IPX0 3.4 Vbraton IEC 60945 Ver. 4 4 COATING COLOR Man Unt N3.0 SP - 1 E2029S02A

Y. Hata c n = Y o s D N : H a t a Y o s h t o s h : 電 子 署 名 者 H a t a Y o s h t o s h 署 名 は 検 証 さ れ て い ま せ ん D-1

Y. Hata c n = Y o s D N : H a t a Y o s h t o s h : 電 子 署 名 者 H a t a Y o s h t o s h 署 名 は 検 証 さ れ て い ま せ ん D-2

C B A 魚群探知機 ソナー レーダー プロッタ MJ-A3SPF0025-035 3.5m,φ8.6 *1. *2. *3. *4. USER SUPPLY. OPTION. FITTED AT FACTORY. RECOMMENDED CONNECTOR AND CABLE: RCA METAL CONNECTOR AND CABLE 2.5C2V, 3C2V OR EQUIPMENT. NOTE MAX.10m FUSE(7A) *1 *4 ｺﾝﾎﾟｼﾞｯﾄ映像信号用ｹｰﾌﾞﾙ COMPOSITE VIDEO SIGNAL CABLE MAX.10m *1 *4 ｺﾝﾎﾟｼﾞｯﾄ映像信号用ｹｰﾌﾞﾙ COMPOSITE VIDEO SIGNAL CABLE 注記 １ ユーザー手配 ２ オプション ３ 工場にて取付済み ４ RCAメタルコネクタ 2.5C2Vか3C2Vケーブル推奨 12-24 VDC CCDカメラ CCD CAMERA ビデオデッキ VIDEO RECORDER CCDカメラ CCD CAMERA ビデオデッキ VIDEO RECORDER *2 3COX-2P-6C 5m/10m,φ8.5 2 *1 *4 ｺﾝﾎﾟｼﾞｯﾄ映像信号用ｹｰﾌﾞﾙ COMPOSITE VIDEO SIGNAL CABLE MAX.10m ECHO SOUNDER SONAR RADAR PLOTTER CCDカメラ CCD CAMERA ビデオデッキ VIDEO RECORDER 1 *4 *4 *4 *3 1 2 3 5 6 3 4 1 2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 DC_P DC_N SHIELD DWG.No. APPROVED CHECKED RGB2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 *3 C2029-C01-A Y. Hata TAKAHASHI.T K.MIYAZAWA IV-8SQ *1 RX2RX2+ RX2_SHIELD RX4RX4+ DDC_SCL DDC_SDA NC RX1RX1+ RX1_SHIELD RX3RX3+ DDC_+5V DDC_GND HPD RXORXO+ RXO_SHIELD RX5RX5+ RXC_SHIELD RXC+ RXC- -D RED GREEN BLUE NC GND GND GND GND NC GND NC NC HSYNC_N VSYNC_N NC Mar. 19 '04 DRAWN 12-24VDC VIN3 GND VIDEO3 VIN2 GND VIDEO2 VIN1 GND VIDEO1 RED GREEN BLUE NC GND GND GND GND NC GND NC NC HSYNC_N VSYNC_N NC 12.1型カラーLCD表示器 MULTI-PURPOSE LCD DISPLAY 3 *3 19-024-5000-1 *2 -D/D SINGLELINK5M 5m,φ7.1 *2 3COX-2P-6C 5m/10m,φ8.5 NAME 名 称 TITLE ECHO SOUNDER SONAR RADAR PLOTTER INTERCONNECTION DIAGRAM MULTI-PURPOSE LCD DISPLAY 相互結線図 MU-120C 12.1型カラーLCD表示器 レーダー RADAR 魚群探知機 ソナー レーダー プロッタ 4 c n = Y o s D N : H a t a Y o s h t o s h : 電 子 署 名 者 H a t a Y o s h t o s h 署 名 は 検 証 さ れ て い ま せ ん S-1

Your Local Agent/Dealer 9-52 Ashhara-cho, Nshnomya, Japan Telephone : 0798-65-2111 fax 0798-65-4200 : All rghts reserved. Prnted n Japan PUB.No. OME-20290 ( HIMA ) MU-120C FIRST EDITION : MAR. 2004 *00014909000* *00014909000* *00014909000* *OME20290A00* *OME20290A00* *OME20290A00*