Pos: 2 /Busch-Jaeger (Neustruktur)/Modul-Struktur/Online-Dokumentation/Titelblätter/Sonstige Bereiche/Datendosen Rutenbeck/Titelblatt - Rutenbeck Adernverteiler @ 22\mod_1332927755123_15.docx @ 206465 @ @ 1 === Ende der Liste für Textmarke Cover === 1473-1-7880 16.04.2012 0219-101 RJ-45 universal module Cat. 6 A iso
Pos: 4 /Busch-Jaeger (Neustruktur)/Modul-Struktur/Online-Dokumentation/Inhaltsverzeichnis (--> Für alle Dokumente <--)/Inhaltsverzeichnis @ 19\mod_1320649044386_15.docx @ 109653 @ @ 1 === Ende der Liste für Textmarke TOC === 1 Intended use... 3 2 Environment... 3 2.1 Disposal... 3 3 Mounting / Installation... 4 3.1 Requirements for the electrician... 4 3.2 Mounting... 5 1473-1-7880 2
Pos: 9 /Busch-Jaeger (Neustruktur)/Modul-Struktur/Online-Dokumentation/Umwelt (--> Für alle Dokumente <--)/Hinweise/Hinweis - Umwelt - Hinweis Elektrogeräte @ 18\mod_1302763973434_15.docx @ 103500 @ @ 1 Pos: 12 /Busch-Jaeger (Neustruktur)/Modul-Struktur/Online-Dokumentation/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.docx @ 52149 @ 2 @ 1 Intended use Pos: 6 /Busch-Jaeger (Neustruktur)/Modul-Struktur/Online-Dokumentation/Überschriften (--> Für alle Dokumente <--)/1. Ebene/A - F/Bestimmungsgemäßer Gebrauch @ 18\mod_1302763321316_15.docx @ 103483 @ 11 @ 1 1 Intended use Pos: 7 /Busch-Jaeger (Neustruktur)/Modul-Struktur/Online-Dokumentation/Bestimmungsgemäßer Gebrauch/Sonstige Bereiche/Bestimmungsgemaesser Gebrauch - Rutenbeck Adernverteiler @ 23\mod_1334065676946_15.docx @ 207693 @ @ 1 The device serves for mounting data cables with a diameter of 6-10 mm without the use of tools. Pos: 8 /Busch-Jaeger (Neustruktur)/Modul-Struktur/Online-Dokumentation/Überschriften (--> Für alle Dokumente <--)/1. Ebene/U - Z/Umwelt @ 18\mod_1302614158967_15.docx @ 103383 @ 11 @ 1 2 Environment Consider the protection of the environment! Used electric and electronic devices must not be disposed of with domestic waste. The device contains valuable raw materials which can be recycled. Therefore, dispose of the device at the appropriate collecting depot. Pos: 10 /Busch-Jaeger (Neustruktur)/Modul-Struktur/Online-Dokumentation/Überschriften (--> Für alle Dokumente <--)/2. Ebene/A - F/Entsorgung @ 20\mod_1325760636580_15.docx @ 136573 @ 12 @ 1 2.1 Disposal Pos: 11 /Busch-Jaeger (Neustruktur)/Modul-Struktur/Online-Dokumentation/Umwelt (--> Für alle Dokumente <--)/Hinweise/Hinweis - Umwelt - Entsorgung Elektrogeräte @ 20\mod_1325760695972_15.docx @ 136583 @ @ 1 All packaging materials and devices bear the markings and test seals for proper disposal. Always dispose of the packaging material and electric devices and their components via the authorized collecting depots and disposal companies. The products meet the legal requirements, in particular the laws governing electronic and electrical devices and the REACH ordinance. (EU Directive 2002/96/EC WEEE and 2002/95/EC RoHS) (EU REACH ordinance and law for the implementation of the ordinance (EC) No.1907/2006) 1473-1-7880 3
Pos: 14 /Busch-Jaeger (Neustruktur)/Modul-Struktur/Online-Dokumentation/Sicherheit (--> Für alle Dokumente <--)/Warnhinweise/Sicherheit - Niederspannungs- und 230 V-Leitungen @ 18\mod_1302617821491_15.docx @ 103465 @ @ 1 Pos: 16 /Busch-Jaeger (Neustruktur)/Modul-Struktur/Online-Dokumentation/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.docx @ 52149 @ @ 1 Mounting / Installation Pos: 13 /Busch-Jaeger (Neustruktur)/Modul-Struktur/Online-Dokumentation/Überschriften (--> Für alle Dokumente <--)/1. Ebene/M - O/Montage / Installation @ 18\mod_1302613966111_15.docx @ 103373 @ 1 @ 1 3 Mounting / Installation Warning Electric voltage! Risk of death and fire due to electrical voltage of 230 V. Low-voltage and 230 V cables must not be installed together in a flush-mounted socket! In case of a short-circuit there is the danger of a 230 V load on the low-voltage line. Pos: 15 /Busch-Jaeger (Neustruktur)/Modul-Struktur/Online-Dokumentation/Sicherheit (--> Für alle Dokumente <--)/Warnhinweise/Sicherheit - Fachkenntnisse @ 18\mod_1302774384017_15.docx @ 103564 @ 12 @ 4 3.1 Requirements for the electrician Warning Electric voltage! Install the device only if you have the necessary electrical engineering knowledge and experience. Incorrect installation endangers your life and that of the user of the electrical system. Incorrect installation can cause serious damage to property, e.g. due to fire. The minimum necessary expert knowledge and requirements for the installation are as follows: Apply the "five safety rules" (DIN VDE 0105, EN 50110): 1. Disconnect from power; 2. Secure against being re-connected; 3. Ensure there is no voltage; 4. Connect to earth; 5. Cover or barricade adjacent live parts. Use suitable personal protective clothing. Use only suitable tools and measuring devices. Check the type supply network (TN system, IT system, TT system) to secure the following power supply conditions (classic connection to ground, protective earthing, necessary additional measures, etc.). 1473-1-7880 4
Pos: 18 /Busch-Jaeger (Neustruktur)/Modul-Struktur/Online-Dokumentation/Montage/Sonstige Bereiche/Montage - Rutenbeck Adernverteiler @ 22\mod_1332855681399_15.docx @ 206448 @ @ 1 Mounting / Installation Pos: 17 /Busch-Jaeger (Neustruktur)/Modul-Struktur/Online-Dokumentation/Überschriften (--> Für alle Dokumente <--)/2. Ebene/M - O/Montage @ 18\mod_1302615960458_15.docx @ 103424 @ 22 @ 1 3.2 Mounting Fig. 1: 1. Guide the prepared cable vertically into the wire distributor. 2. Swing the cable down. 3. Push the cable into the wire distributor so that the pin sits below the cable sheath. Fig. 2: 4. Place the coloured wires into the wire holder and secure them. 5. Cut the projecting wires so that they are flush with the holder. 1473-1-7880 5
Mounting / Installation Fig. 3: 6. Guide the prepared cable vertically into the wire distributor. 7. Insert the wire holder into the wire distributor. 8. To secure the wire holder, press the retaining wedge into the wire distributor. Fig. 4: 9. Swing the strain relief bracket onto the cable sheath and press it on. 10. Fix the wire holder tightly together with the cable tie (the lock of the cable tie must be at the bottom). The cables are now connected. === Ende der Liste für Textmarke Content === 1473-1-7880 6
=== Ende der Liste für Textmarke Backcover === Pos: 20 /Busch-Jaeger (Neustruktur)/Modul-Struktur/Online-Dokumentation/Rückseiten (--> Für alle Dokumente <--)/Rückseite - Busch-Jaeger - Allgemein @ 20\mod_1327320074886_15.docx @ 137103 @ @ 1 A member of the ABB Group Busch-Jaeger Elektro GmbH PO box 58505 Lüdenscheid Freisenbergstraße 2 58513 Lüdenscheid Germany Notice We reserve the right to at all times make technical changes as well as changes to the contents of this document without prior notice. The detailed specifications agreed to at the time of ordering apply to all orders. ABB accepts no responsibility for possible errors or incompleteness in this document. We reserve all rights to this document and the topics and illustrations contained therein. The document and its contents, or extracts thereof, must not be reproduced, transmitted or reused by third parties without prior written consent by ABB. 1473-1-7880 16.04.2012 www.busch-jaeger.com info.bje@de.abb.com Copyright 2012 Busch-Jaeger Elektro GmbH All rights reserved Central sales service: Phone: +49 (0) 180 5 669900 Fax: +49 (0) 180 5 669909