Hardware Announcement 110-031, dated January 26, 2010 New versatile punch unit available for InfoPrint Pro C900 and C900s printers Table of contents 1 Overview 3 Product number 1 Key prerequisites 4 Technical information 1 Planned availability date 4 Terms and conditions 1 Description 4 Prices Overview InfoPrint Solutions Company, a Ricoh -IBM joint venture, announces the General Binding Corporation (GBC) StreamPunch III for the InfoPrint Pro C900 and C900S. The GBC StreamPunch III provides a flexible, cost-effective punching solution for departmental and midlevel production environments. Provides ready-to-bind documents in a wide variety of hole patterns and styles. Includes user-replaceable die set options. Can be controlled from the host operator touch panel display. Punches paper with a weight of 20 lb bond (75 gsm) to 80 lb cover (210 gsm). Can punch up to 300,000 sheets per month. Key prerequisites InfoPrint Pro C900 and C900S Planned availability date March 26, 2010 The country where these products can be announced is: United States Description GBC StreamPunch III The GBC StreamPunch III provides a flexible, cost-effective punching solution for departmental and midlevel production environments. GBC StreamPunch III - NA (#6581) - MES only GBC StreamPunch III - EU (#6583) - MES only This unit provides a professional in-line punch solution for the InfoPrint Pro C900 and C900S. InfoPrint is a registered trademark of Ricoh Co., Ltd. 1
The unit punches individual sheets at the rated print speed. Provides ready-to-bind documents in a wide variety of hole patterns and styles. Options include a wide variety of user-replaceable die sets. The die sets are a consumable part. This punch cannot be selected from an IPDS TM datastream. The GBC StreamPunch III must be directly attached to the SR5000 Finisher. Punched output cannot be stacked into the SK5000 High-Capacity Stacker. The SR5000 Finisher must be installed when the GBC StreamPunch III is installed. The North American version (#6581) punches the 11-inch edge of 8.5 in x 11 in sheets at host printer speed. The European version (#6583) punches the 29.74 cm edge of an A4 (21.59 cm x 29.74 cm) sheet at host printer speed. Can be controlled from the host operator touch panel display. Punches paper with a weight of 20 lb bond (75 gsm) to 80 lb cover (216 gsm). Up to 300,000 sheets per month. Bypass mode allows media that are supported by the printer to be bypassed directly to the SR5000 Finisher (#4540, 4541). Can be used with the Cover Interposer Tray CI5010 (#4600, 4601) by placing the Punch Unit after the Cover Interposer. Media inserted by the Cover Interposer can then be punched. Physical dimensions: 12 in x 38.5 in x 28.5 in 154 lb (69.9 kg) Configuration rules: Minimum number of this feature: 0 Maximum number of this feature: 1 Prerequisites: InfoPrint Pro C900 or C900S Corequisites: A line cord must be ordered for this feature. The SR5000 Finisher (#4540, 4541) is required when the GBC StreamPunch III is installed. The GBC StreamPunch III Cover Kit (#6587) is required when the BK5000 Saddle Stitch Booklet Finisher is installed. Compatibility conflicts: None Customer setup: No Limitations: The European version (#6583) and the North American version (#6581) must be ordered as an MES. Refer to above for paper sizes and weights supported. Plant installation: This feature is not available on an initial order. Field installation: Feature number 6581 for North American voltages (115 V ac, 60 Hz). Feature number 6583 for European voltages (230 V ac, 50 Hz). Cable order: None InfoPrint is a registered trademark of Ricoh Co., Ltd. 2
Die sets The GBC StreamPunch III is capable of punching a variety of hole-punch patterns by simply changing the die set. Die sets can be changed quickly without tools. The die sets currently available are listed below. The die sets are a customer replaceable part and are not covered under the maintenance agreements. It is a customer responsibility to obtain replacement die sets. The following die sets can only be used with the GBC StreamPunch III North American (#6581). Any quantity of each of these die sets may be ordered. These die sets can only be ordered on MES orders. 3-hole Die Set (#6560) VeloBind 11-hole Die Set (#6561) WireBind 21-hole Die Set(#6563) WireBind 32-hole Die Set (#6564) ColorCoil 44-hole Die Set (#6565) ProClick 32-hole Die Set (#6566) Plastic Comb 19-hole Die Set (#6562) Note: GBC, StreamPunch III, CombBind, ColorCoil, VeloBind, and Pro Click are all registered trademarks of the General Binding Corporation, an ACCO Brands company. Reference information For InfoPrint Pro C900, refer to Hardware Announcement 109-082, dated January 27, 2009. For InfoPrint Pro C900s, refer to Hardware Announcement 109-299, dated April 28, 2009. Business Partner information If you are a Direct Reseller - System Reseller acquiring products from InfoPrint Solutions Company, you may link directly to Business Partner information for this announcement. A PartnerWorld ID and password are required (use IBM ID). https://www.ibm.com/partnerworld/mem/sla.jsp?num=110-031 Product number The following features are for the InfoPrint Pro C900 and C900S (machine type 2709 Models M01 and P01). Machine Description Type Models InfoPrint Pro C900 2709 P01 InfoPrint Pro C900s 2709 M01 Initial MES Feature Feature Description Number Number Models GBC StreamPunch III - 6581 M01, P01 InfoPrint is a registered trademark of Ricoh Co., Ltd. 3
3-Hole Die Set - 6560 M01, P01 VeloBind 11-Hole Die Set - 6561 M01, P01 WireBind 21-hole Die Set - 6563 M01, P01 WireBind 32-hole Die Set - 6564 M01, P01 ColorCoil 44-Hole Die Set - 6565 M01, P01 ProClick 32-hole Die Set - 6566 M01, P01 Plastic Bind 19-Hole Die Set - 6562 M01, P01 GBC StreamPunch III Cover Kit - 6587 M01, P01 Model conversions: No model conversions are available. Technical information Security, auditability, and control These products use the security and auditability features of the host hardware, software, or application software. The customer is responsible for evaluation, selection, and implementation of security features, administrative procedures, and appropriate controls in application systems and communications facilities. Terms and conditions Field installable feature Yes Warranty period These features assume the same warranty or maintenance terms as the machine in which it is installed. The terms and conditions for these features are the same as for the base machine. Prices For information on pricing, please contact your InfoPrint Solutions Sales Representative or your InfoPrint Solutions Business Partner. These features are for InfoPrint Pro C900 and C900S. Description Field-Installable (MES) features: Feature Number GBC Punch Unit (NA) 6581 3-Hole Die Set 6560 VeloBind 11 Hole Die Set 6561 WireBind 21-hole 6563 WireBind 32-hole 6564 ColorCoil 44-Hole Die Set 6565 ProClick 32-hole Die Set 6566 Plastic Bind 19-Hole Die Set 6562 GBC StreamPunch III Cover Kit 6587 Trademarks InfoPrint is a registered trademark of Ricoh Co., Ltd. 4
IPDS is a trademark of Ricoh Co., Ltd. in the United States, other countries, or both. InfoPrint and Ricoh are registered trademarks of Ricoh Co., Ltd. in the United States, other countries, or both. Ricoh is a registered trademark of Ricoh Co., Ltd. and its affiliated companies. PartnerWorld and IBM are registered trademarks of IBM Corporation in the United States, other countries, or both. Other company, product, and service names may be trademarks or service marks of others. Terms of use InfoPrint Solutions Company LLC ("InfoPrint") products and services which are announced and available in your country can be ordered under the applicable standard agreements, terms, conditions, and prices in effect at the time. InfoPrint Solutions Company LLC ("InfoPrint") reserves the right to modify or withdraw this announcement at any time without notice. This announcement is provided for your information only. InfoPrint is a registered trademark of Ricoh Co., Ltd. 5