NEW Interface RF Connector with Switch MS-5C Series Overview Designed for end user applications requiring redirection of the transmission. Small size, lightweight and high reliability make it ideal for use in wireless applications requiring bandwidth of up to 6Hz. Features. Confirmation of complete connection Built-in interlock feature confirms fully mated condition with a click sensation. 2. Non-directional connection The connector can be mated in any position on a 360 axis and can rotate within the same when in use, allowing routing of the connected cable in any direction. 3. High durability uaranteed 5000 insertion/removal cycles. 4. Space-saving The external dimensions of the board-mounted receptacle (7.3mm high, 7.9mm wide and 8.45mm deep) make it ideal for use in small devices. 5. Ease of connection and handling Over-molded plug, with convenient grip and built-in cable strain relief assures reliable mating/un-mating by the end user. 6. Designed for board placement with automatic equipment Top surface of receptacle assembly is flat, allowing reliable hold for vacuum nozzles of automatic placement equipment. 7. compliant All components and materials comply with EU Directive 2002/95/EC, with respect to all applicable substances. Plug can be rotated after full insertion. Receptacle Plug MS-5C Applications PS terminals, wireless LAN modules, desktop and notebook computers, PDA s, high frequency equipment and other applications requiring re-direction of the transmission. SMA Conversion Adapter For Receptacle: MS-5C MS-5-C(BP) SMA Conversion Adapter For Plug: MS-5-C(BP) MS5P-HRMJ- MS5J-HRMJ 2006.2
Product Specifications Frequency range DC to 6Hz Operating temperature range 40ç to +85ç Power rating 4W Not mated with the plug Open (Mated with MS-5-C(BP)) DC to 2 Hz.2dBmax..3dBmax. 2 Hz to 4 Hz 4 Hz to 5 Hz 5 Hz to 6 Hz.3dBmax..7dBmax..5dBmax..7dBmax. DC to 2 Hz 0.4dBdBmax. 0.4dBdBmax. Insertion loss 2 Hz to 4 Hz 4 Hz to 5 Hz 5 Hz to 6 Hz 0.5dBdBmax..0dBdBmax. 0.6dBdBmax. 0.8dBdBmax. DC to 2 Hz -------------- 8dBdBmin. Isolation loss 2 Hz to 4 Hz -------------- 4dBdBmin. 4 Hz to 6 Hz -------------- 2dBdBmin.. Contact resistance 2. Insulation resistance 3. Withstanding voltage 4. Vibration 5. Shock 6. Temperature cycle 7. Humidity 7.(Steady state) 8. Salt spray Item Specification Conditions 9. Mating/un-mating forces 0. Durability (insertion/ withdrawal) Materials 50 mø max. 000 Mø min. No flashover or insulation breakdown No electrical discontinuity of 0 µs or more No electrical discontinuity of 0 µs or more Contact resistance: 00 mø max. Insulation resistance: 0 Mø min. Contact resistance: 00 mø max. Insulation resistance: 0 Mø min. Contact resistance: 00 mø max. No excessive corrosions Mating : to 0N Un-mating : 3 to 5N Contact resistance: 00 mø max. 00 ma 00 V DC 00 V AC / minute Frequency : 0 to 500 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions Acceleration of 490 m/s 2, 6 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis Temperature : 55ç / +5ç to +35ç / +85ç / +5ç to +35ç Time : 30 / 5 / 30 / 5 (Minutes) 00 cycles 96 hours at 40ç, humidity of 90% to 95% 5% salt water solution, 48 hours With corresponding connector (Initial value) 5000 cycles Receptacle Part Material Finish Insulator Polyamide (UL94V-0) --------------- Lock mating section Stainless steel old plated Outer conductor Phosphor bronze old plated Contact A Phosphor bronze old plated Contact C Beryllium copper old plated Plug Part Material Finish Ring Stainless steel Nickel plated Outer conductor Phosphor bronze Nickel plated Inner contact Phosphor bronze old plated Insulator PTFE --------------- Ferrule Phosphor bronze --------------- Bushing TPEE-M --------------- 2
BHigh Frequency Characteristics (Typical) NORMALLY CLOSED(N.C) ~ (Not mated with the plug) [db] 0.0 Insertion Loss Insertion Loss : SPEC : INSERTION LOSS SPEC : ISOLATION SPEC 0.5 INSERTION LOSS.0.5.8.6.4.2.0 0 2 3 4 5 6 [Hz] OPEN(N.O) ~ (Mated with the plug) ISOLATION [db] 0.0 0.5 INSERTION LOSS.0.5 3.0 2.8 2.6 2.4.6.4.2.0 0 2 3 4 5 6 [Hz] [db] 0 5 0 5 20 25 ISOLATION 30 35 40 45 50 0 2 3 4 5 6 [Hz] 2.2 2.0.8 3
Receptacle.8 4.6 4-.2 7.9 6.5 8.45 7.45 0.75 0.6 4.5 7.3 MS 5C 2-0.3 2-0.25.8 3.6 4.3 2-0.65 2-Ø0.9 Part Number CL No. Packaging 2.2 2-0.8 MS-5C 358-02-8 800 pieces per reel 2.2 2.2 BCircuit diagram Not mated with the plug (N.C) Mated with the plug (N.O) B Plug A C MS-5C (Receptacle) B A C BPCB mounting pattern 2-Ø(Through hole) 0.4 4.6 2.2 4-.8 0.9 Recommended metal mask thickness: 0.5mm 5.45 5.05.9 2-0.55 2-0.6 2-0.55 2-0.6 8.5 6.9 5. 4.3 2.4 0.9.8 3.6 8.5 4.3 2.4.8 3.6 0.7 0.7 0.9 2.4 2-.2 4.65.9 5 5.05 No resist 2.6 2-.2 4.6 4-.8 4
BPackaging Specifications 2 2 4 Ø.5.75 Ø3 Reel dimensions Embossed tape reel packaging (800 pieces/reel) Unreeling direction 6.4 (Ø80) Ø380 MS 5C MS 5C 6 7.5 Ø2 Unreeling direction (9.) (0.5) 22.4 max. BRecommended Temperature Profile Lead-free Solder Paste Temperature(ç) 260 230 0sec. Max. Maximum temperature Duration of peak temperature Peak temperature : 260ç :0 sec. max. : 240ç to 255ç 80 230ç min 50ç to 80ç : 40 sec. max. : 90 to 20 sec. 50 00 50 90~20sec. 40sec. Max. 0 Time (Second) 5
Plug * Supplied by HRS only as a terminated cable assembly. Ø8 Ø4.5 5 39.5 24.5 Part Number CL No. Applicable cable Packaging MS-5-C(BP) 358-029-0.5DS-QEHV(TA) SMA Conversion adapters For Receptacle: MS-5C /4-36UNS-2A Ø7.3 Ø4.5 6.3 6 6.29 4 26.29 Part Number CL No. Packaging MS5P-HRMJ- 355-0090-6 For Plug: MS-5-C(BP) /4-36UNS-2A Ø7.3 Ø2.9 6.3 6 6.29 3.5 5.79 Part Number CL No. Packaging MS5J-HRMJ 355-0088-4 6
Applications Wireless LAN IEEE802.a/b/g Digital Home D/T PC wireless LAN AP BDesktop PC with inner antenna for wireless LAN Inner antenna MS-5-C(BP) Outer antenna for wireless LAN MS-5C 7