GOLDEN STATE INSTRUMENT CO. 3002 Dow Ave Suite 228 Tustin, CA 92780 USA 888-808-0909 gsi@goldenstateinst.com http://goldenstateinst.com GS-LCD101S V-POD CCTV ENHANCED VIDEO PROCESSOR WITH COMPUTER INTERFACE AND T.V. TUNER version. 4
SET UP Included with the LCD-101S are most of the components you will need for your video solutions. Inside the box you will find the LCD-101S the main V-Pod unit, a transformer, remote control and batteries, RCA to S-Video adaptor, RCA to BNC adaptor and a VGA (CPU) connecter cord. Connect the cables as show below, this will be the most typical setup. Power: Will turn this unit on or off. There are two LED's on the front right of the unit. One is red which indicates the power is off, and green indicates it is on. Source: Will change which input you are viewing, Video in or Tuner. Menu: Will bring on the On Screen Display (OSD) Ch- / Ch+: This will change the Tuner channels to the next available channel. Vol- / Vol+: These buttons do not change the audio level in this unit at this time. A: 5VDC Transformer connection B: VGA Output connection (connect to monitor) C: VIDEO IN: S-Video connection (or use included S-Video to RCA adaptor) Optional: Also included is a VGA IN connector that connects to PC. Pg. 1
MAIN This is the main On Screen Display screen. To enter and adjust the PICTURE SETUP O.S.D. press the MENU button on the V-Pod. To move the cursor or SEARCH TIME make adjustments you will use the Volume +/- and Channel +/- buttons. AUDIO ACCES. Pressing the Menu button while back you out to the previous screen. Main Menu: Press the Menu button on the V-Pod or the V-Pod remote to access the On Screen Display (OSD). The first screen in the OSD Menu has six sub-menus. Use the Channel +/- buttons to move the cursor to the submenu you wish to enter. When the desired sub-menu has the cursor on it use the Volume +/- buttons to enter that sub-menu. PICTURE ADJUST BRIGHT 45 Scale from 0-100 CONTRAST 45 Scale from 0-100 SATURATION 31 Scale from 0-100 HUE 50 Scale from 0-100 COLOR TEMPATURE NORMAL Normal, Warm or Cold PICTURE MODE USER Normal, Soft, Bright, or User Picture Adjust Menu: Bright: How you adjust the brightness of your picture. (0-100) Contrast: How you adjust the contrast of your picture. (0-100) Saturation: How you adjust the intensity of COLOR in the picture (0-100) Hue: How you to if the color of the picture should be more green (0-50) or more red (51-100). Color Temperature: How you adjust the mood of the picture. (Cold, Normal, Warm) Picture Mode: Sample presets of settings or custom. (Normal, Soft, Bright, User) Pg. 2
AUTO SCAN MANUAL SCAN TV MENU Automatic channel search menu Manual channel search menu CH EXCH 1 1 First channel to swap CH EXCH 2 1 Second channel to swap EXCHANGE CONFIRM Select to perform channel swap TV Menu: Auto Scan: This sub-menu will automatically search out and setup channels. There are quick search and normal search modes. Quick search will search the VHFL band for available channels. Standard search will search all three bands for available channels. Manual Scan: This sub-menu will allow you to configure your tuner. You can select each channel and tune it to the settings you desire. Channel Exchange: This function will allow you to switch one channel number with another channel number. To do this, set the first channel in the EX Channel 1, and assign the second channel in the EX Channel 2 position. When both channels to be swapped are set select the Exchange Confirm? menu item to perform the swap. AUTO SCAN FAST SCAN NORMAL SCAN A quick scan in the current Band A slong scan through all Bands MANUAL SCAN CHANNEL 1 The channel you are adjusting (1-128) BAND VHFL The frequiency range of the channel (VHFL, VHFH, UHF) SEARCH < > This will scan to the next viewable channel FINE >>> For manual fine tuning of the channel SKIPP OFF If "ON", this channel will not show Pg. 3
AUDIO SETUP This menu is fixed. There are no VOLUME 50 adjustments with this version. EQUIALIZE 50 STEREO 50 Audio Setup: This menu is fixed at this time. SYS. SETTINGS OSD SETTINGS Select this to enter this sub-menu DISPLAY MODE Select this to enter this sub-menu ADVANCED SETTINGS Select this to enter this sub-menu BLUE BACKGROUND ON On or Off FACTORY MODE Select this to enter this sub-menu Sys. Settings: OSD Settings: This sub-menu will let you adjust settings for the look and interaction of the OSD. Display Mode: This sub-menu will let you adjust the settings for the monitor input and scale. Advanced Settings: This sub-menu will let you adjust fine controls for the picture. Blue Background: When no picture is present the unit will provide a blue background. (On or Off) Factory Mode: If selected, this will default the unit to factory settings. Pg. 4
OSD SETTINGS LANGUAGE ENGLISH English or Chinese BRIGHT NORMAL Normal, Bright or Gloom MIX NORMAL Light, Normal or Heavy BACKGROUND GRADUAL Gradual, Normal or Mix OSD Settings: Language: This selection will adjust which language the OSD is seen in. (English or Chinese) Bright: This selection will adjust the brightness of the OSD. Mix: If using the Mix Background this will adjust how dark the OSD is over the background. Background: This will adjust the background of the OSD, Gradual=Light to dark, Normal=Blue background, Mix=OSD is clear and the displayed picture can be seen through the OSD. DISPLAY MODE SIGNAL SOURCE AV AV, SV or TV COLOR SYSTEM AUTO Auto, PAL, NTSC, PAL N, PAL M or SECAM MONITOR TYPE 4:3 4:3, 16:9 or 16:10 800x600 60-75Hz, 1024x768 60-75Hz DISPLAY RATIO 800X600 60Hz 1280x720 60-75Hz, 1280-1024 60-75Hz, 1440x900 60-75, 1600x900 60, 1680x1050 60 POP MODE CENTER Center, Top Left, Bot Left, Top Right, Bot Right BROWSE MODE 9 PIC 4 PIC, 9 PIC, 16 PIC AUTO, 800x600 60-75Hz, 1024x768 60-75Hz VGA RATIO AUTO 1280x720 60-75Hz, 1280-1024 60-75Hz, 1440x900 60-75, 1600x900 60, 1680x1050 60 Pg. 5
Display Mode: Signal Source: From this menu you can change which input the V-Pod is set to. (You can also switch sources with the Video button on the remote or the Source button on the V-Pod. AV, SV or TV) Color System: This adjustment is for which broadcast format your system uses. The USA uses NTSC as a standard. Options include Auto, PAL, NTSC, PAL N, PAL M, or SECAM. Display Ratio: This menu can adjust what resolution your monitor will display for Video or TV input. The higher the resolution the harder the V-Pod has to work at processing signals. The quality of the picture may decrease at higher resolution settings. POP Mode: For Picture in Picture mode (PIP) this setting will adjust where on the screen the PIP comes into view. The PIP overlays the video input over the VGA input. (Top L, Top R, Center, Bot L, Bot R) Browse Mode: For tuning PIP sources (not applicable for use in security market) VGA Ratio: This menu will adjust the V-Pod to match the VGA settings you are using for the Computer or device that is sending the VGA signal. ADVANCED SETTING DENOISE LOW Off, Low, Mddle, High PEAKING 0 0-10 BLE ON On, Off GAMMA OFF Bright, CRT, LCD WIDE SCREEN NORMAL Normal, 4:3 TIME SETTING SYS OFF 00:00 NO USE [Hours:Minutes] : No Use, Once, Always SYS ON 00:00 NO USE [Hours:Minutes] : No Use, Once, Always REMIND 00:00 NO USE [Hours: Minutes] : No Use, Once, Always RESERVE 00:00 NO USE TIME 00:00 NO USE [Hours:Minutes] Pg. 6