Model: L329TRS
Introduction Safety is important In the box Safety information Electrical information Instruction Battery safety guidelines Safety warnings Parts identification Front, side and above view Rear view Remote control Connecting the TV Connecting the aerial Connecting external devices HDMI lead Remote control Remote control Installing the batteries Using the remote control Operating the TV Switching on Switching off Tuning in digital TV Tuning in satellite TV Advanced Setup To Add New Services/Channels Frequently Asked Questions Basic operation Source selection TV channel selection Return Volume Mute Favourite Subtitle Information Audio TV/ Menus Picture settings Sound settings Channel Setup Channel Edit TV Setup Lock Function settings Electronic Programme Guide Direct Record 3 3 4 6 7 9 9 10 11 12 12 12 12 13 13 13 13 14 14 14 14 15 15 16 17 18 18 18 18 18 18 19 19 19 19 19 20 20 20 21 21 22 22 23 24 24 Viewing Recordings Pause Live TV Digital text Analogue teletext Common Interface Slot HDMI/AV setup PVR USB operation Trouble shooting Care and maintenance Disposal Guarantee Manufacturer Specifications 25 25 25 26 27 27 28 30 31 32 32 32 32 33
AVTEX TV Power cord 12 Volt DC lead
Instruction This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. DO read the operating instructions before you attempt to use the equipment. DO ensure that all electrical connections (including the mains plug, extension leads and interconnections between the pieces of equipment) are properly made and in accordance with the manufacturer s instructions. Switch off and withdraw the mains plug before making or changing connections. DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment. DO route the mains lead so that it is not likely to be walked on, crushed, chafed, or subject to excessive wear and tear or heat. DON T remove any fixed cover as this may expose dangerous voltages. DON T obstruct the ventilation openings of the equipment with items such as newspaper, tablecloths, curtains, etc. Overheating will cause damage and shorten the life of the equipment. DON T allow electrical equipment to be exposed to dripping or splashing, or objects filled with liquids. DON T place hot object or naked fame sources such as lighted candles or night-lights on, or close to equipment. High temperatures can melt plastic and lead to fires. DON T use makeshift stands and NEVER fix legs with wood screws-to ensure complete safety always fit the manufacturer s approved stand or legs with the fixings provided according to the instructions. DON T use equipment so that you are distracted from the requirements of traffic safety. DON T listen to headphones at high volume, as such use can permanently damage your hearing. DON T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a stand-by mode. Switch off by unplugging the equipment and make sure that your family know how to do this. Special arrangements may need to be made for infirm or handi-capped people. DON T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way-switch off, withdraw the mains plug and consult your dealer. ABOVE ALL, - NEVER let anyone especially children push anything into holes, slots or any other opening in the equipment - this could result in a fatal electrical shock; - NEVER guess or take chances with electrical equipment of any kind. It is better to be safe than sorry! 5
Battery safety guidelines Used correctly, domestic batteries are a safe and dependable source of portable power. Problems can occur if they are misused or abused- resulting in leakage or, in extreme cases, fire or explosion. Here are some simple guidelines to safe battery use designed to eliminate any such problems. Take care to fit your batteries correctly, observing the plus and minus marks on the battery and appliance. Incorrect fitting can cause leakage or, in extreme case, fire or even an explosion. Replace the whole set of batteries at one time, taking care not to mix old and new batteries or different types, since this can result in leakage or, in extreme cases, fire or even an explosion. Supervise children if they are replacing batteries themselves in order to ensure these guidelines are followed. Store unused batteries in their packaging and away from metal objects which may cause a short-circuit resulting in leakage or, in extreme cases, fire or even an explosion. Remove dead batteries from the unit and all batteries from the unit you know you are not going to use for a long time. Otherwise the batteries may leak and cause damage. Make sure battery compartments are secure. Never dispose of batteries in fire as this can cause them to explode. Please recycle dead batteries; do not put with the normal household waste. Never attempt to recharge ordinary batteries, either in a charger or by applying heat to them. They may leak, cause fire or even explode. There are special rechargeable batteries which are clearly marked as such. 6
Safety warnings Use in a vehicle Note For use only when vehicle is Stationary. Read all the instructions carefully before using the unit and keep them for future reference. Retain the manual. If you pass the unit onto a third party make sure to include this manual. Check that the voltage marked on the rating label matches your mains voltage. Damage Inspect the unit for damage after unpacking. Do not continue to operate the unit if you are in any doubt about it working normally, or if it is damaged in any way -switch off, withdraw the mains plug and consult your dealer. Location of Unit The unit must be placed on a flat stable surface and should not be subjected to vibrations. Do not place the unit on sloped or unstable surfaces as the unit may fall off or tip over. The mains socket must be located near the unit and should be easily accessible. Temperature Avoid extreme degrees of temperature, either hot or cold. Place the unit well away from heat sources, such as radiators or gas/electric fires. Avoid exposure to direct sunlight and other sources of heat. Naked Flames Never place any type of candle or naked flame on the top of or near the unit. Moisture To reduce the risk of fire, electric shock or product damage, do not expose this unit to rain, moisture, dripping or splashing. No objects filled with liquids, should be placed on the unit. If you spill any liquid into the unit, it can cause serious damages. Switch it off at the mains immediately. Withdraw the mains plug and consult your dealer. Ventilation To prevent the risk of electric shock or fire hazard due to overheating, ensure that curtains and other materials do not obstruct the ventilation vents. Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure the unit is well ventilated. Safety Always disconnect the unit from the mains supply before connecting/disconnecting other devices or moving the unit. Unplug the unit from the mains socket before a lightning storm. Mains Cable Make sure the unit or the unit stand is not resting on top of the mains cable, as the weight of the unit may damage the cable and create a safety hazard. Interference Do not place the unit on or near appliances which may cause electromagnetic interference. If you do, it may adversely affect the operating performance of the unit, and cause a distorted picture or sound. 7
Safety warnings Batteries Batteries used in the remote control for this unit are easily swallowed by young children and this is dangerous. Keep loose batteries away from young children and make sure that the battery holder tray is secure in the remote control. Seek medical advice if you believe a cell has been swallowed. Dispose of batteries correctly by following the guidance in this manual. Supervision Children should be supervised to ensure that they do not play with the unit and the remote control. Never let anyone especially children push anything into the holes, slots or any other openings in the case -this could result in a fatal electric shock. Service To reduce the risk of electric shock, do not remove screws. The unit does not contain any user-serviceable parts. Leave all maintenance work to qualified personnel. Do not open any fixed covers as this may expose dangerous voltages. Maintenance Ensure the unit is fully unplugged from the power supply before cleaning. Do not use any type of abrasive pad or abrasive cleaning solutions as these may damage the unit s surface. Do not use liquids to clean the unit. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the unit s enclosure that may be sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the manual accompanying the unit.
, above POWER INPUT VOL+ VOL- CH+ CH- MENU 1 2 3 4 5 6 7 1 POWER TV standby mode 2 INPUT Accesses the source menu 3 VOL+ Increases the volume 4 VOL- Decreases the volume 5 CH+ Increases the channel number 6 CH- Decreases the channel number 7 MENU Enter or exit setup menu
Ext I/R VIDEO L - AUDIO - R AUDIO IN Side I/O Ext I/R PCMCIA USB2 USB1 Bottom I/O HDMI2 VIDEO L - AUDIO - R HDMI1 COAXIAL AUDIO IN RF SAT 12V/24V (ARC) 1 2 3 4 5 6 7 8 9 10 11 1 Connection port of external remote control 2 PCMCIA card Slot for external Conditional Access(CA)-modules. 3 USB jack 4 AV input 5 12V/24V DC input terminal 6 HDMI1/HDMI2 in socket. Refer to HDMI lead on page12 7 Coaxial audio out 8 DVI audio in 9 Headphone output terminal 10 RF input terminal(aerial) 11 SAT input terminal
In Bluetooth source, will activate matching function. To display the currentplaying program information in DTV 39 38 BATT 40 41 DTV 38. BATT To display TV supply voltage. 39. S/Q To display signal strength and quality. 40. PICTURE To change picture mode. 41. SOUND To change sound mode. 11
VIDEO L - AUDIO - R AUDIO IN e back(rf in) of the TV. Connect satellite cable to the SAT socket on the rear of the TV. Rear connection panel You can connect the TV to a compatible device using a HDMI lead, using this method will give you optimum picture. Connect the cable from the HDMI equipment to one of the TV HDMI sockets. The HDMI2 will support the ARC function, so it is possible to connect the TV to an audio device that also has ARC capabilities. Please activate this function in the TV setup menu by setting the CEC and ARC settings to ON, allowing the standard supplied TV remote control to control the audio device volume and standby conditions. Ext I/R Satellite RF cable HDMI 2 (ARC) HDMI 1 DVD or VCR player 12
13
Channel Press the power switch on the left hand side of the TV blue Data : 0 Programme(s) periods such as overnight. Switch the TV off using the Power switch on the side of the TV. in digital TV Primary Region Secondary Region Tertiary Region Wales Please wait for channels to populate the list, there may be a small delay as all channels are correctly allocated. For your information HD channels are populated in the list from channel 101 onwards. OSD Language Country Auto Search English UK ALL PAGE+ PAGE- hold down 14
Tuning in satellite TV For convenience your 329TRS comes with a default channel list from first switch on, you are able to edit and sort this list to your own personal preference. If any further channels are required then you must start a full scan. To perform a full scan Press TV SETUP and select Channel, press OK or Select the wanted satellite(default is Astra 28.2) Confirm there is signal in the indicator Scroll down and select Search Transponder, press OK This will then start a complete scan of the selected satellite Channel Satellite ASTRA 2 28.2E Transponder 10714 H 22000 Channel Search Advanced Setup Channel Edit Favourite List ALL Transponder Advanced Setup By default your satellite TV will automatically scan all Free To Air or all Scramble channels on the satellite you have chosen in the Channel menu. There is however an opportunity to modify any of these auto settings in the Advanced Setup menu. It is advised not to change any default setting unless advised by qualified personnel. To enter Advanced Setup you will need to input password (default 0000). Satellite Transponder LNB Type LNB Power 22KHz ToneBurst DisEqc1.0 DisEqc1.1 Advanced Setup ASTRA 2 28.2E 12538 V 41248 09750/10600 13/18V AUTO Off Off Off DisEqc1.2 Off OK EXIT SETUP S Q Search Channel Transponder Load to USB A scan will locate all new services on the selected satellite and add after the default channel list. 36 %... 036 11527MHz V27500KHz DTV : Radio : EXIT Auto Search 107 programme(s) 8 programme(s) SETUP Any new/wanted channels can now be edited/sorted to the users desired preferance, please refer to page 21 for channel edit feature. MANAGER SCAN OK SETUP EXIT Load to/from USB (Satellite only) At any time, it is possible to download any of the alterations made to the channel list or favourite lists. Insert a USB memory device into USB1 of the TV and enter advanced menu. Select Channel and using cursor keys set to Load to USB press OK. This will download the current satellite channel settings to the memory device, and if needed in the future can be used to upload back into the TV by changing the setting to Load from USB. Setting Favourites (Satellite Only) Press TV SETUP and select Channel, using the cursor keys select Favourite List and press OK. It is now possible to set up to 5 Favourite lists. Press the FAV button to select the list and then add the wanted programmes using the RED button. To delete any programmes from the favourite list, use the cursor keys to highlight and press YELLOW to delete. S Q 15
To select your favourite list whilst viewing press the FAV button and use the cursor keys to browse through the lists. When selecting a programme to watch either user the cursor keys and select OK, or enter the channel number to view, (needs to be a 3-digit entry i.e. Channel 3 will be entered as 003). To Add New Services/Channels Due to broadcast changes and to future proof your Satellite TV it is possible to add additional transponders so you have the opportunity to add any new channels that may get added to the channel list. To add a transponder follow the procedure below: Access Advanced Setup menu, you will need to input password (default 0000) Press the GREEN button to enter satellite and TP Manager Select the satellite you are tuned to (default Astra 28.2), and press the button enter TP list. Advanced Setup 01 028.2E Ku_ASTRA 2 28.2E 02 019.2e Ku_ASTRA 1 19.2E 03 013.0E Ku_HOTBIRD 13.0E Advanced Setup 001 10714MHz H 22000KHz 002 10729MHz V 22000KHz 003 10744MHz H 22000KHz 04 160.0E Ku_OPTUS Transponder D1 160.0E 004 10758MHz 96 V 22000KHz Transponder 05 152.0E Ku_ASTRA 1E 1G 3A 005 10773MHz 10714 H 22000KHz Symbol 22000 06 156.0E Ku_NILESAT 101 10 006 10788MHz V 22000KHz Polarity H 07 023.5E Ku_ASTRA 3 23.5E 007 10803MHz H 22000KHz 08 001.0W Ku_SIRUS 4.8E 09 000.8W Ku_THOR 0.8W 10 005.0W C_ATLANTIC BIRD3 5W Add Transponder MANAGER SCAN OK SETUP EXIT 008 10817MHz V 22000KHz 008 12647MHz V22420KHz 009 10832MHz H 22000KHz 010 10847MHz V 23000KHz Press BLUE scanning button, your Satellite TV will then automatically scan the new transponder and add any new channels found and add them to you channel list. S Q 01 028.2E Ku_ASTRA 2 28.2E 02 019.2e Ku_ASTRA 1 19.2E 03 013.0E Ku_HOTBIRD 13.0E 001 10714MHz H 22000KHz 002 10729MHz V 22000KHz 003 10744MHz H 22000KHz Transponder Search 04 160.0E Ku_OPTUS D1 160.0E 05 152.0E Ku_ASTRA 1E 1G 3A 004 10758MHz V 22000KHz 005 10773MHz H 22000KHz DTV Radio 9 5 06 156.0E Ku_NILESAT 101 10 006 10788MHz V 22000KHz 07 023.5E Ku_ASTRA 3 23.5E 007 10803MHz H 22000KHz Bad Good 08 001.0W Ku_SIRUS 4.8E 008 10817MHz V 22000KHz 09 000.8W Ku_THOR 0.8W 10 005.0W C_ATLANTIC BIRD3 5W MANAGER SCAN OK SETUP EXIT 009 10832MHz H 22000KHz 010 10847MHz V 23000KHz S Q OK SETUP EXIT Press RED button Add the new frequency. Symbol rate and polarity. Press OK to store. 16
Frequently Asked Questions For satellite setup 17
AV top right hand side of the screen. 18
Favourite(Digital TV only) 1 BBC ONE West 10:05 16:15 23:00 Sat Oct 21 2017 S Q 23 bid tv 576i DTV SD MPEG Subtitle English MHEG5 Narration 3/10. A Foreign Field:Australian crime drama.whey the body of a man is found in a park. it falls to Dr Lucien Blake to find out not just how he died but also the man s true identity.[ad,s] PAGE+ PAGE- TV SETUP Audio language option is dependent on broadcast. 19
TV SETUP TV SETUP Sound Mode Treble Bass Balance Hearing Impaired AD Switch AD Volume Sound Off Off 50 50 50 0 col Hearing Impaired- Allows you to turn on/off hearing impaired in DTV Hearing Impaired option is dependent on broadcast. 20
AD Switch - Allows you to turn on/off AD Switch. in DTV AD Volume - Allows you to adjust AD Volume. Channel Setup(Digital TV only) Software Update(OAD) Allows you to update MOVE PAGE+ PAGE+ PAGE- PAGE- 21
Cacel 22
Aspect Ratio - Allows you to set up aspect ratio: User setup - Allows you to adjust setting for Aspect Ratio, Noise reduction, Sleep Timer, OSD time, Auto sleep and headphone. HDMI CEC - Connect an ARC compatible sound system to the HDMI2 and set the settings as below to use TV remote control to control volume and standby operation. Funtion OSD Language User Setup HDMI CEC Reset English HMDI CEC HMDI ARC Auto Standby Auto TV on Device control Device list HDMI ARC SB195BT OSD Time-Allows you to set OSD menu display time out. 5s 10s 15s 20s 25s 30s 35s Auto Sleep-Allows you to turn on/off the auto sleep after four hours. Headphone - Allows you to turn on/off the headphone output. User Setup OSD Time 15s Headphone 23
1 BBC ONE West 10:05 16:15 S Q 23:00 Sat Oct 21 2017 23 bid tv 576i DTV SD MPEG Subtitle English MHEG5 Narration 3/10. A Foreign Field:Australian crime drama.whey the body of a man is found in a park. it falls to Dr Lucien Blake to find out not just how he died but also the man s true identity.[ad,s] To stop the recording at any time, press the STOP button on the remote control. PROGRAMME GUIDE 07:32 17/10/2017 Stop recording, are you sure? 17/10/2017 14:15-15:10 1 BBC ONE West Channel Name 15:00 15:30 16:00 16:30 Th... Escape to the C... Home Comforts at christ... Flog It! The Great Britis... The Great Anit... 2 BBC TWO The World s Mo... Wogan: The Bes... 3 ITV Wales New: 1000 Hearbeats Tipping Point 4 S4C Cegin Bryn: Indi... Babi Del: Ward... A wr Fawr 5 Channel 5 6 ITV2 Angels and Ornaments The Jeremy Kyle Show Christmas Switch The Jeremy Kyle Show... 7 BBC THREE 9 BBC FOUR This Is BBC Three This Is BBC Four REC SCHEDULE +12H -12H PAGE+ PAGE- INFO OK EXIT Yes No Select "Yes" to stop recording or "No" to continue the recording. Setting a record from the EPG PAGE+ PAGE- +12H -12H scroll information about programmes for the next seven days. You can also set timer recordings from the EPG, select the desired programmes and press. Direct Record Insert USB memory device into USB1. Press the REC on the remote control and the current programme will record directly DELETE 24
Viewing Recordings To view any recorded programmes, press the List button on the remote. (Depending on file size there can be a small delay displaying the list). Highlight the wanted programme and press Info will display programme details. To watch highlight the programme and press play on remote control. To delete, highlight in the list and press the RED button. Pause Live TV To pause live TV, press the Time Shift button, the programme will stop. To continue watching press the Play button and the programme will resume. To return to live TV press the Stop button. Recorded list Programme Digital text is an information system that display s text on your TV screen. The Darling Buds of M... DELETE INFO LIST OK EXIT 25
video Analogue video 26
/AV AV 27
Insert the setup key on the remote. Scorll down through the menu using the Digital TV or Satellite TV. keys to Note : USB must be in USB (not USB REC) to format Select Disk C: Check PVR File System SUCCESS C: Format Pass Check PVR File System Start Time Shift Size ALL Format Speed HD support 2730KB/s Max record time 6Hour SETUP Max record time SETUP 6 Hour Select Disk will select the destination disk for recording TV program. Check PVR File system. Format will format the disk. Max record time will limited the max record time. After recording, press list button to display files information. Pressing info button to display details. Allows you select USB disk or HDD size for recording. Pressing to change. to 28
File System Size PVR File System Type FAT32 PVR File System Size All Recorded list Programme SD 300 Mins HD 85 Mins SETUP if you want to format disk, Please. DELETE INFO LIST OK EXIT Exit Warning: Please make sure your USB or hard disk has at least 500MB free space and then create PVR file system before you record Digital TV program. 29
BATT on the USB there may be a long pause. In movie playback mode if wanted image is too small press play button to fill whole screen. are become unresponsive to down TV and remove USB and switch on the TV. Do not remove the USB whilst it is reading/playing. The symbol shown below means an invalid operation has been attempted. 30
31
3 Manufacturer U 0 32
32 698.4(H) X 392.85(W) 121.25(H) x RGB x 363.75(W) 8ms 230 1200:1 178 178 HDMI: 1920 x 1080;75Hz 2 Coaxial 42 0.5 3.5 731mm x 431mm x 61mm 4.7kg 33
Full HD Model: L329TRS