S V - series type 聚光燈 & 泛光燈 - 高效能 PAR38 IP C.M. Lamp 1000lm A25 調光 APP Dimming 可調光 Base Type : E27 Input Voltage : 100~240V LED Source : Osram Beam Angle : 220 Total Power Consumption :14W±10% Power output : 12W±10% (Camera : 5W ; LED : 7W) Smart device requirement : To make sure the APP to operate smoothly, it is recommended to use with quad-core processor with 2G RAM and up. APP operating system : ios 8.0 and up Android 4.4 and up Feature Easy set-up 1.0mm Board Fisheye Lens for 360 panorama. 2 Megapixel CMOS Progressive Sensor Up to 30 fps at 1280x1024 pixel Resolution Support Micro SDXC card 64GB for long time recording. Built-in Microphone, to audio record. Support 802.11b/g/n, 300Mbps wireless Safety & Environment Specifications V series -C.M. Lamp are manufactured to conform to the following safety approbation. Certificated Mark EMC LVD ErP Certificate Approval Certificate Approval : : Completed : In Progress Read the following guidelines before installing : Avoid covering the front of the camera to ensure the view can be captured completely. One third of the lamp needs be exposed outside of the fixture to allow enough view and light. Keep the power of the Device and the Router on in order to monitor through the use of APP remotely. Network bandwidth upload speed is 10Mb or above, to keep the system stability. Disable Router firewall before use. Please set the Router to a fixed channel, to improve Internet stability.
仕樣 Specification Polar Diagram Part Number LED Source Input Voltage CCT C.R.I. (RA) Beam Angle( ) CBCP Candela (cd) Total Pow. +/-10% Typical Lumens (lm) Efficiency (lm/w) Dimming Power Factor (PF) BLV8026P25-OVW3602HWF Osram 3030 100~240V 2700K 80 220 155 14 1000lm 73 APP Dimming 0.8 Option 1 : Lamp base: E27 Option 2 : Input Voltage: 100~240V Option 3 : The above CCT. is defined based on ANSI standard. Specific color temperature can be done upon customer request. For instance 2700K could be assigned as 2580~2725K or 2725~2870K, the same can be accomplished for 3500K and 5500K as well but shall be withdifferent price. 2200K is also available upon request. Device Specification Genral Specification Storage Micro-SDXC 64GB Recording time is about 5-10 days (recording time depends on the recording environment) Network Interface Range Wireless Security Video 802.11b/g/n Up to 10 meters WPA, WPA2, WPA+WPA2 Password protected access Compression format H.264 Image sensor Board Lens HD 1/3" 3M progressive scan CMOS sensor, 2 Megapixel 5M Fisheye fixed focus Fixed Focal Length 1.0mm/ F2.2 Resolution 1280 X 1024 Max. Frame Maximum FOV (Field of View) Max. 30fps at 1280x1024 360 panorama : 180 (diagonal)/180 (vertical)/ 180 (horizontal) Motion Detection Light Sensor Lighting Control Audio Capability Sensor/Control Audio Three-zone for detection, sensitivity Adjustable Build-in Ambient Light Sensor Support APP for Light Control Built-in Microphone 2
仕樣 IP C.M. Lamp Connection Mode P2P (peer-to-peer) connection is to exchange information between peers and without the need to go through a middle server. Through this type of connection mode, the device and user can exchange information directly without a middle server to increase security and to ensure the information can be protected. 3
Overview of APP Device Connection Connect the device to the Router. Turn off the power before installation, gently twist the devise into the socket and turn on the power. Device will light up within 45 seconds to complete initialization; the devise will flash one time and brightness adjusted to 50% of the total light output and to be ready to use. Connection status Connected Connecting Not connected Record Options Record type Off(Default) Fulltime Event Video Overview Look up the saved video anytime Search by date (each video is 5 mins) Default setting in off. Adjust the recording options based on your needs. Video saved in [Record List] 4
Overview of APP Brightness adjustment ON/OFF control, 0-100% brightness adjustment. Viewing angle adjustment Multiple-Angle Viewing angle adjustment Flip 360 360 Fisheye mode Panorama VR mode Flip vertically Split mode Snapshot / on time recording Instant monitor, snapshot and watch recording. (Files will be saved in your smart device) 5
Overview of APP Push Nofications When IP C.M. Lamp detects any motion, App will send push notification, user can watch the scene of home immediately. Notification function shows SSID [setting] -[Unit detail] -[Record type] choose [Event] IP C.M. LAMP QRCODE Please keep the QR code for future re-configuration 1111 00123A Place Sensor light Under the mode of Sensor Light on (light off and night light off ),when the CM Lamp detcects object,sensor light will be triggered, and light will be turn on, and then light will be turned off automatically after 5 mins. [setting] -[sensor Light Setting] -[ON] CM Lamp time setting While CM Lamp connects to internet, video will show the time as user s locating time zone. While CM Lamp does not connect to internet, video will follow the time of smart phone. 6
Overview of APP Video download Each video is 5 mins, you can download the specific period of r ecording Click Choose the video you want Click It take 2 mins to download each video Do not close the APP between While downloading It will show " video is saved " after download successful. Night light setting When the light turn off and the Ambient light less than 6lx,Nightlight will turn on automatic. According to the local time zone at 7:00 AM, the night light will turn off automatically, and will turn on while the ambient light less than 6lux. 7
2D Drawing Product Packing C.M. Lamp Step 1 Step 2 Gife Box 1Pc of Lamp Outerior Box 10 gift Boxes Dimensions(mm) L: 146*W:85* H:222 Dimensions(mm) L:449*W:240*H:314 Lamp body material CAMERA:Fisheye lens Dimension (mm)- Ø:80mm Net Weight (g): Ø80 COVER:PC 142 HEAT SINK:Aluminum BASE:NPB Base: E27 Net Weight (g): 495 Luminaire Notice The LED Lamp is not compatible with all luminaires for halogen lamps. Before installation, please read following guidelines: -No sealed fixtures. -Not for outdoor fixtures. -Not for wet environment. No sealed fixtures Not for outdoor fixtures
Safety Label & Warning Do not cover lamp with paper, fabric, or any flammable material to avoid burning. Working Environmental Temperature: -10 ~ +40 Do not insert metal objects into the gap of lamp base. The appropriate combination of lamp and lamp base should be carefully selected for different voltage and wattage. Do not use in high-humidity environment or near water to avoid damage. (Except B.L.T.C. Outdoor IP65 version) Not suitable for use in automatic light sensor system, emergency lighting fixture and mercury fixture to avoid damage and burning. Do not use near flammable objects such as gasoline, spray, chemicals, paints, oil etc. Do not use in place that is likely to be impacted by force or vibration. Do not use in acidic environment. Please turn the light off when installing or cleaning to avoid electrical shock. Please handle with care to avoid damage and collision. Do not touch any powered-on lamps or lamps that have just been turned off to avoid burning. Please ensure the lamp is tightly installed into the socket to avoid dropping. Please select the appropriate fixture based on lamp size and weight. General Guideline Please use power supply 100~240V, Frequency 50/60 Hz for the product. Slight difference of color temperature and brightness is likely to occur for the same part number due to the difference of LED chips. Brightness, color temperature, and light distribution may vary with different types of bulbs. To avoid heat build-up and the shortening of product lifetime, sealed fixture is not recommended. Keep the lamp away from radio, video and television for a distance of 1 meter to avoid noise caused by interference. Do not install lamp in heal insulated fixture. Do not disassemble or reconstruct the lamp. Do not stare directly at the lamp to avoid eye injury. The light distribution may vary with different type of fixtures. Do not wash the lamp with water. Do not use the lamp outdoor if it is not marked as IP65. To avoid damage and poor insulation, do not use the lamp near water or in frosted environment if it is not marked as IP65. For lamps with a weight significantly higher than that of the lamps for which they are a replacement, attention should be drawn to the fact that the increased weight may reduce the mechanical stability of certain luminaires and lampholders and may impair contact making and lamp retention. 9